Midlet communication withing a suite

greetings,
could you tell me how to enable a midlet to either access a field of another midlet in the same suite, or how a midlet can gain a reference to another midlet in the same suite. i am using sun's midp reference implementation the WTK 2.1.
thanks.
mm

could you tell me how to enable a midlet to either
access a field of another midlet in the same suite, orLook at class RecordStore.
I quote from the javadocs: "MIDlets within a MIDlet suite can access each other's record stores directly".

Similar Messages

E90 Communicator with Ovi Suite

To enjoy the convinience of manupulating my E90 Communicator contents from my PC, I connect my phone through Ovi Suite. The messaging icon however indicates that I have 18 unread messages but I have read all my messages. How do I clear the unread mesages count (the number that appears on the right hand corner of the envelope icon for messaging)?

Hi numann
I'm sorry for not being clear, I shall try to help if I can.
PC Suite or Ovi Suite will not be able to handle all the numbers in the way you require them too unless they work better than they used to!
I don't need the contacts I previously had to have because I am sort of retired but even during the heights of my business I never needed so many contacts on my phone (less than 150 for sure) - this was always my personal preference because I did not want the whole world being able to contact me on mobile 24/7, all but current clients and the most trusted could leave messages elsewhere.
I do come from a pre mobiles-do-everything era and so my views on being contactable non stop may sound and be rather old fashioned and if I needed to contact someone I would find other means of finding the number, such as texting or phoning someone who could give me the number anyway. Same with mutliple addresses and so forth.
Having said that if I did have multiple numbers or even use the phone to keep notes then I would simply set up the same company or person as a seperate entity and give entries a certain prefix. Yes, I am a dinosaur !!!
However non of that helps you and I'm sorry but I don't know the answers, may be some others here do, I hope so. A friend of mine uses an E90 (or used to do) but I can't get hold of the guy to ask.
E71-1(241.04) RM-346 300.21.012

Problem with PC Suite and Windows 7 Home Edition 64-bit

I installed PC Suite on my desktop with Windows 7 Home Edition 64-bit installed. I was able to eventually run PC Suite (granted it needed to run in XP SP2 compatibility mode) and sync my calendar on my W518a cell phone with PC Suite via Bluetooth communications. After I turned off my computer and restarted it, I could no longer open up PC Suite...its icon appears in my system tray with a red X over it as if it can't find the program.
The SonyEricsson website indicates PC Suite can run with Windows 7.
What is causing the problem I am having? How do I get this corrected?

I have downloaded and reinstalled the PC Suite software. Although it is not working as well as it should, as long as I have my cell phone on with Bluetooth enabled prior to clicking on the icon to open the application, it seems to work OK. Otherwise, when it opens, it just hangs and the only way you can close the program is to get into Task Manager and force it closed when its status is showing as "Not Responding". I also have found that just "closing" the PC Suite window does not close the application...you have to click on the option to "Exit the Application" otherwise you continue to have it in your system tray with a red X over the icon.

Xilinx SDAccel and NI LabVIEW Communications System Design Suite win a pair of EETimes/EDN ACE Ultimate Product Awards

Last night, EETimes and EDN presented a number of ACE Awards including twelve “Ultimate Product” awards. The Xilinx SDAccel Development Environment for C, C++, and OpenCL won the Ultimate Product Award in the Development Kits category.
EETimes/EDN 2015 ACE Awards
From the SDAccel entry form:
“The SDAccel development environment for OpenCL, C, and C++, enables up to 25X better performance/watt for data center application acceleration leveraging FPGAs and combines the industry’s first architecturally optimizing compiler supporting any combination of OpenCL, C, and C++ kernels, along with libraries, development boards, and the first complete CPU/GPU-like development and run-time experience for FPGAs. SDAccel streamlines the development and deployment of critical algorithms such as Deep Neural Networks used in machine learning.
SDAccel includes the industry’s first architecturally optimizing compiler that makes efficient use of on-chip FPGA resources along with a familiar software-development flow based on an Eclipse integrated design environment (IDE) for code development, profiling and debugging, providing a CPU/GPU-like work environment.
SDAccel leverages Xilinx’s dynamically reconfigurable technology to enable accelerator kernels optimized for different applications to be swapped in and out on the fly. The applications can have multiple kernels swapped in and out of the FPGA during run-time without disrupting the interface between the server CPU and the FPGA for nonstop application acceleration. This functionality is ideal for swapping applications during peak loading periods.”
(Note: For more information about the Xilinx SDAccel design environment, see “CPU/GPU-like software development environment for OpenCL, C, C++ delivers FPGA-based app acceleration with 25x better performance/W,” “and “Latest SDAccel release adds 4 new hardware dev platforms, 4 new libraries, 6 new design services firms.”)
Vinay Singh accepts an ACE Award for the SDAccel design environment from Max Maxfield
The LabVIEW Communications System Design Suite from National Instruments (NI) won the ACE Ultimate Product Award in the Software category. NI’s LabVIEW Communications System Design Suite combines software defined radio (SDR) hardware with a comprehensive, unified software design flow to help engineers prototype 5G systems. The package includes built-in application frameworks for WiFi and LTE that enable wireless developers to focus on creating specific components based on existing standards rather than designing new algorithms from scratch.
The LabView Communications System Design software is coupled with the company’s USRP software-defined radio development platform for 5G research, which is based on a Xilinx Kintex-7 All Programmable FPGA. Wireless engineers can use the NI USRP RIO and the NI LabVIEW Communications System Design software to rapidly prototype real-time wireless communications systems and test them under real-world conditions.
(Note: For more information about the NI LabVIEW Communications System Design Suite, see “LabVIEW Communications System Design Suite combines SDR hardware with a unified software design flow for 5G development.”)
Congratulations to all of the talented developers from both National Instruments and Xilinx who created these award-winning products.

N82 Problem of synchronization with PC Suite

I just bought a N82 last week. And of course I want to synchronize my outlook address book into the new cell phone. How ever the poblem happened when I using PC Suite. The following is the details.
Enviroment:
Nokia PC Suite version 7.0.7.0
PC OS - Windows XP SP2
Outlook - version 2003 build 11.6568
Problem description:
I installed the PC suite, and connected with my N82 by USB line. The connection is OK. But synchornizing with outlook is always fail with a message. I tried to test some more functions with PC Suite. And the results are listed below:
1. Backup and Restore. Works OK only for the N82 itself, which means I can backup address book, short message from my N82 and restore them to the cell phone from the PC. However, when I tried to restore the address book of my old 7360 to N82, it failed. Maybe the problem is caused by incompitable data format of different type of cell phone.
2. Synchronization with outlook. It totally failed with a warning 'PC data synchroniztion software encounted a problem, the synchronaztion has been terminated.' I don't know what's wrong with it.
3. Nokia Communication Center. Totally failed. I cannot synchronize my N82's address book and short message onto the PC. And also I cannot save the new contacts created on the PC back into N82. Similar with short message. When I create a new message on my PC and try to send it through N82. It failed.
4.Nokia Image Store. Works OK. I can download my graphics and videos onto PC.
That's all for my test. The biggest problem is that all the way I can find to get the address info from my old phone to new N82 cannot work. I really don't want to input hundreds of lists one by one.
In order to avoid any conflicting with other software, I also try to install the PC suite with a total clear XP system. The result is the same. I really don't know what's wrong, can anyone help me? Thanks a lot.

HI telemann,
If i tried to sync, it synched properly, if i try to send SMS it sent properly, more vitally, it was reflecting on both PC and on the phone. When i tried to create a new contact Test, it was created and saved successfully on the phone
In XP SP-2, 32 bit i can do above things without any problems
You can try to create new settings on PC Sync and check and also make sure that all your calender and contact entries are proper and do not have any spcl character, unwanted blank space, if calender entries are there check their end dates and sync settings etc., Hope it should work without any issues ... Best of luck

Can't synchronize Nokia 3500 with PC Suite v.7

Hi, I have the problem with synchronize Nokia 3500 with Outlook or Outlook Express. But I can sync contact from Outlook to Mobile nokia 3500, and can't sync contact from mobile to outloock (
Please help me.
P.S.
O.S: XP (sp3)
mobile: nokia 3500 v.05.51 06-09-07 RM-272
Soft: PC Suite v. 7.0.7.0

Thank's for repley.
I understanded where the problem was.
The first, i had communicator with windows mobile 5.0. I copied all contacts from smartphone to OUTLOOK. After that I copied all contacts fromm Outlook to Nokia 3500c. The problem confine in incompability of diffrent phone.
if I create the contact in Nokia 3500c, all sync work good.

Problems downloading sms's with PC Suite

Hi guys. I've looked everywhere and can't find an answer to this
I'm using PC Suite (7.1.18.0) on a Lenovo T60 and use it for downloading my messages (SMS) via the infrared port from a nokia 6230. The trouble I'm having is that when the PC reads the contents of my phone some of the messages displayed in PC suite (sometimes up to 4 or 5) seem to be bundled into one continuous message that does not make sense. It is almost as these messages have been cut copied and pasted in no particular order.
Has anyone else experienced this? Any help would be thoroughly appreciated. Thanks in advance, d.

here is what could find after I checked all sources  I usually do..
One of them is the page of the phone it self : http://europe.nokia.com/A4144016 (You are here - Nokia Europe Get support and software> Product support> Nokia 6230>Software> PC Software
as you see here are also links  to the PC Suite which is developed for the phones of that period ..
as time pases the computers ( phones too:-)) and software has changes and it is not aways possible to  possible to integrate the old one in to the new. So I here I suppoe is a case like this ..
there is something else I want to show you : it is the description of the PC Suite 5.8 and the notes bellow - you can  see that depending OS you can connect your phone to PC using 3 deferent  cables ( which is not very native for the rest of all phones, usually phone can be vonnected only via 1 single type of cable) however in 5.8 there is no application such as Nokia Communication Centre in 7.1; further more - usually to use the complete functionality of Nokia Communication Centre - when you first time connect a phone, the programm promts you to install a small application in to the phone that will help to use the Nokia Communication Centre correctly - you can see this if you open HELP > REINSTALL PC SUITE SUPPORT - this small application helps to appered on PC Suite when first time Nokia Communication Centre was released. this mean it uses special protocol of communication with the phone..
On the other hand I read the opening on PCS 7.1 page and here it is :
(http://europe.nokia.com/get-support-and-software/download-software/nokia-pc-suite/supported-features)
To view Nokia PC Suite features that are supported by your device, find the device model from the table below or type it into the search field and click Search.
Note: The availability of Nokia PC Suite features, connection types, and add-on applications varies according to device model. Only device models compatible with the latest version of Nokia PC Suite are listed here. For information on the Nokia PC Suite versions for earlier device models, first select your device on the Download page.
in addition you need to connect phone by one of the following cables : DKU-2, CA-53, CA-70 ( or IrDA and Bluetooth ( as for BT there are also deferent sys requirements than those forpc suite 5.8)
compare same info about PC Suite 5.8 :
connecting with cable CA-42,  DKU-2
in the applications list and  description  the only fully compatible phones are 6230 and 7600
So after I saw the screenshots you send me the only reason I see is that you are using PCS 7.1 , but not 5.8
If you need my help or I late with an answer you need, send me a private message
P.S.
Please before doing that, be sure you have already searched the topict on this site about the issue you have. Read Help sections before asking. Describe yor issue step by step with complete details.

Sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loop

sir i have given lot of effort but i am not able to solve my problem either with notifiers or with occurence fn,probably i do not know how to use these synchronisation tools.

sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loopHi Sam,
I want to pass along a couple of tips that will get you more and better response on this list.
1) There is an un-written rule that says more "stars" is better than just one star. Giving a one star rating will probably eliminate that responder from individuals that are willing to anser your question.
2) If someone gives you an answer that meets your needs, reply to that answer and say that it worked.
3) If someone suggests that you look at an example, DO IT! LV comes with a wonderful set of examples that demonstate almost all of the core functionality of LV. Familiarity with all of the LV examples will get you through about 80% of the Certified LabVIEW Developer exam.
4) If you have a question first search the examples for something tha
t may help you. If you can not find an example that is exactly what you want, find one that is close and post a question along the lines of "I want to do something similar to example X, how can I modify it to do Y".
5) Some of the greatest LabVIEW minds offer there services and advice for free on this exchange. If you treat them good, they can get you through almost every challenge that can be encountered in LV.
6) If English is not your native language, post your question in the language you favor. There is probably someone around that can help. "We're big, we're bad, we're international!"
Trying to help,
Welcome to the forum!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

I get an error message when trying to install windows 7 on my macbook pro. The message says "windows has encountered a problem communicating with a device connected to your computer. I don't have anything connected to my computer. How do I fix this?

I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I am using windows 7 professional install disc. I can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?

Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
"P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

"The software required for communicating with the iPod is not installed..."

I realize my explanation of my problem is long-winded, so if you want a shortened version, here it is:
I've followed all the instructions trying nearly everything, and no matter what I do, iTunes gives me the error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software." My G5 iPod (60GB) works on two other computers (both without any music on them), so I assume there something wrong with my computer and not the iPod itself.
Now for the long-winded story of the last eight hours of my life...
I just got the Generation-5 iPod Video (60GB) a today and I'm having problems already. I followed the instructions and installed the iPod software and then plugged in my iPod (iTunes has been on my computer for a while now). I was expecting iTunes to open after plugging in the iPod, but my device manager only detected and installed "a new device". I manually opened iTunes and got an error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software."
After re-installing the iPod software and iTunes, and restarting my computer countless times, I came looking for help here. I found this page, which seemed to outline my problem exactly. My computer recognizes the iPod as a drive, but iTunes won't have anything to do with it. I have all the symptoms outlined in the heading, so I hoped to solve my problem there. I followed the instructions step-by-step, and after the final restart, I open iTunes to get the same exact error message.
I decided to determine whether there was a problem with my iPod or if it was my computer. I plugged my iPod into my uncles's powerbook, and got to the point where I can name and configure my iPod. I expected it to work flawlessly on a Mac (which it did) but there is no way for me to continue using a Mac (after tomorrow) for my iPod. This formatted the iPod for a Mac, so I went to another (different from the original) Windows computer, clean of any iTunes and iPod software, and followed the instructions exactly as they're supposed to be followed. After the installations, I plugged in my iPod, and although iTunes didn't open, I was able to format back to Windows and name my iPod (a step in the right direction). I should note that my (anti-iPod) computer is a Windows XP Pro, and the working one is Windows XP Home Edition. This was all well and good, until I remembered there was no music on this computer. So my iPod is completely working there, but there isn't anything I can do with it.
Next, I came back here and browsed around the discussion boards, hoping to find somebody with a similar problem to mine. There seems to be alot of errors concerning iTunes not recognizing the iPod, but none of the solutions I tried worked for me, including changing the drive letter. I get the "iPod Service Error" while trying to restore to factory settings through iPod updater.
Of course, I could transfer all 32GB of music from one computer to another, but the second (working) computer isn't mine and I won't have access to it in a couple months. It would be most convenient if I could get my iPod working on my own computer. Any help would be appreciated, especially from somebody who has solved this problem or know how to solve this problem.
P.S.
Here are some other minor details that my be important, but I didn't feel they were worth including.
- My brother has his iPod mini set up on my computer, under a different user login. He gets the same error once in a while, but re-installing iTunes always solves the problem for him. I had him try solving my problem his way, but nothing worked for him either.
- My computer is an AMD Athlon 64 Processor 3200+, 512MB RAM with Windows XP Pro SP2 installed. My internal hard drive is partitioned, using the letters C, D and H (C being my system files, D used for recovery files and H for my applications and games). My E drive is used as a DVD/CD-ROM Drive, and drives F and G are reserved for virtual drives (none have been running during this entire ordeal). My external hard drive uses the letter I, and I manually set my iPod to use the letter J (I've never used 'J' for anything else before).
- Yes, I have downloaded and installed the latest versions of iTunes and the iPod software.
- I'm assuming there is a problem with my computer and not my iPod, since it worked on both other computers I tried. I'm hoping it's as simple as changing a registry file or cleaning out (yet another) temp directory.

Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
I think that's all that's required, but I also searched through the registry and deleted the following keys.
4. Other keys I deleted:
4.1 HKEYCLASSESROOT --> IPodManager.IPodManagerUI.1
4.2 HKEYLOCALMACHINE --> SOFTWARE --> Apple Computer Inc. --> iPod
I think that's all I deleted, but I'm not positive. I seached for instances of "ipod" using the Find... and Find Next functions under the Edit menu.
5. Exit out of the registry editor.
6. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark

I get an error message when trying to sign into the support community with another Apple id. On the pick a username screen I get "an account utilizing this address already exists...." despite trying a few usernames. Anyone know how I can resolve this?

I get an error message when trying to sign into the support community with another Apple id. On the <pick a username> screen I get "an account utilizing this address already exists.Only one account per email address is allowed on the Apple Support Communities" despite trying a few usernames. Anyone know how I can resolve this?

This problem has been driving me demented. The instructions that Ivan gives have partially worked for me. By following his link
"How to find out if you have multiple Apple IDs" I was able to identify that yes I did have two apple accounts using the same e mail address. One was very old that I used to use for the forum boards and one is my much more recent ID that I use for everything these days. So I changed the e mail address for the old account which is associated with these discussion boards and that's the account that I am now posting this from. However even though the two accounts now have different e mail addresses when I try to log onto the boards with my more recent main apple ID I still get all the same errors as described at the start of this thread by rodgers_j. And of course that's the one I want to use so that I only have one itunes account for everything.
So if anyone has any more hints I'd be very grateful.

There is a problem communicating with the printer.

I have a Lexmark Interpret S405. I am using a MBP laptop with WiFi, running 10.5.8. I have a cabled (non-wifi) Linsys router. I am using an Airport Express.
I was finally able to get the WiFi light on the Lexmark to be static green after reinstalling the Lexmark WiFi setup and reconfiguring my Airport settings so that both the computer and printer see each other.
In fact, I even updated the driver from Lexmark's Web site last night and I watched the WiFi light on the printer blink green indicating that the installation of the driver update was being communicated to the printer.
However, when I print, it opens the print window and says first "Looking for S300-S400", then it says "Printer is now online". Then after about 10 seconds, I get this error: "There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or hold the job and try again."
I've exhausted Lexmark's technical databases and couldn't find the answer here.
I've read that one possible solution was to delete all the printers from the "Print & Fax" system preferences window and re-add. That didn't work.
Lexmark says for: The printer communicating on a network; however, the printer is not responsive. Possible causes could be:
1. Your printer is associated with a network, router, or access point, but it is not your network.
2. A software process is blocked by a system security firewall preventing network communication.
3. You are logged into Virtual Private Network (VPN).
4. You are connected to a network but have decided to switch to a USB connection.
I don't have a VPN and have removed the USB cable, then restarted both printer and computer, and deleted printers in Sys Prefs, restarted, and still no solution.
I can print directly via USB cable, but want to print wirelessly.
Lexmark also says to enter my PIN (which I have pulled out from the print menu screen on the printer) in the System. That tells me a lot...
Network settings on the print window on the printer also tell me Signal strength is 5 (excellent) and that I am on the network my airport is on.
Message was edited by: Macman17

I bet this is too late but...
Are you trying to print through the airport express wirelessly or the built in wireless of the lexmark? If you want to use the airport express, there is no need to mess with the wireless printing on the lexmark at all. The airport express will be easy to set up, all the wireless setups through the printers are a pain.

ITunes Seem to Have Suddenly Stopped Communicating With the CD/DVD Burner

Hello, I wonder if anybody can help - my itunes application seems to have suddenly stopped communicating with my laptop's cd/dvd burner
(Generic Name (E: H - T-S D D A S - 20N ATA Device)).
About 2 years ago, I have experienced a similar problem, but was able to resolve it by downloading 64-bit compatible GEAR drivers to my system. However, the problem has re-appeared when I have updated to iTunes Version 10.1. Funny enough, the cd/dvd burner started getting recognized again when I updated to iTunes Version 10.2, but halfway through me burning a large playlist to multiple cds has suddenly stopped recognizing the cd/dvd burner again, and has never "resolved itself" ever since.
I have tried multiple approaches to solving this issue, including completely re-installing itunes software and completely re-installing GEAR drivers, but nothing works. I have even tried uninstalling GEAR drivers completely, as I read that it worked for someone on one of the similar forums, but that didn't work either.
My itunes diagnostics runs all the points of the cd/dvd drive check successfully, except for the last point (Can Not Read Audio CD). Here's what the diagnostics summary looks like:
Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 2 (Build 6002)
Hewlett-Packard HP Pavilion dv9700 Notebook PC
iTunes 10.2.1.1
QuickTime 7.6.9
FairPlay 1.11.16
Apple Application Support 1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Driver not found.
Bonjour 2.0.4.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0016AB580A7B0C28
Current user is not an administrator.
The current local date and time is 2011-04-14 17:52:25.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 7150M / nForce 630M
** External Plug-ins Information **
No external plug-ins installed.
The drive F: Motorola MB810 Rev 0001 is a USB 2 device.
iPodService 10.2.1.1 (x64) is currently running.
iTunesHelper 10.2.1.1 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: H-T-S DDA
S_-20N, Rev W_05
Audio CD in drive.
Found 1 songs on CD, playing time 255:08 on Audio CD.
Track 1, start time 00:02:00
Audio CD reading failed. Error Code: 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 27 0 0 0 0.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed succeeded.
The drive CDR speeds are: 3 9 16 24.
The drive CDRW speeds are: 3.
The drive DVDR speeds are: 3.
The drive DVDRW speeds are: 3.
Error Correction is turned on for importing audio CDs.
I have noticed that the diagnostics summary containes a suggestion to update firmware of my laptop's cd/dvd drive, but currently there are no such firmware updates available.
Another frustrating issue that I ran into was trying to convey this issue to Apple Technical Support via e-mail using the Express Lane for the troubleshooting issues. I really fail to understand why I am being asked for the "hardware serial number" when I'm clearly choosing the categories for "iTunes/CD-DVD Import Issues" which are software, not hardware, categories! This prevents me from being able to simply send the description of my problem to the correct Apple Support department, and does not let me do that even when I enter my itunes' Serial Number, which can be found in the diagnostics summary provided above.
Much Thanks to anyone who can provide any kind of helpful advice, even if it's just on how to be able to convey this problem to Apple Support via e-mail!

Okay ... checking something else:
Current user is not an administrator
Is that true? Or do you in fact have a Windows user account with full administrative rights?
(It's possible that a permission may have gone astray in your usual user account, which might be causing the burning issues.)

SOLUTION to "Software required for communicating with the iPod is not insta

Folks, I can not take credit for this.....you should send your checks to MarkinMadison. I've included his post in it's entirety. For me, this was the Holy Grail !!
My only comment is make sure when you are in the registry that you hit the "apply" button to change and add things.
This probably won't solve everyone's problem but it clearly solved mine (and I tried all other "solutions"), as well as Mark's.
Apple: please find out who MarkinMadison is and either cut him a big check or offer him free Ipods for life.
"Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Click the checkbox that says: "Replace owner on subcontainers and objects."
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
3.7 If you can't delete, you might need to open up the keys and repeat the procedure on the sub-keys.
4. Exit out of the registry editor.
5. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark"
Dimension 4600 Windows XP

I have also posted the same question, earlier today. I purchased two for my children and cannot get the iPod to communicate with the computer. I have the iTunes software on my system, but during the installation process I cannot click the NEXT button, once I plug the iPod cable in. The computer does not detect it. I have tried all 6 USB 2.0 ports. I even removed the Dell Jukebox and MusicMatch programs. I am not a computer savvy person - just a mom who wants to give these to my children for Christmas. This is the first "chat" site I have even registered on. I am so very frustrated. Hopefully, this can be resolved.

"An error occurred in the communication with the BW server"

Hi, when I open BEx Analyzer and try to connect to my BW server to run a query, I get this message, "An error occurred in the communication with the BW server".
Can someone help me.
thanks
Pat.

If it's happening consistently, it could be a problem with your local m/cs MS office and/or SAP GUI.
If it was working before:
1) Uninstall SAP GUI and MS office.
2) Install MS Office and SAP GUI...then try to connect to BW.
Good luck, BB

Midlet communication withing a suite

Similar Messages

Maybe you are looking for