MIDLET working fine in emulator but not working on mobile!

hi,
i have an application which sends http request (get), it works fine in an emulator but when i install that application onto P900 sonyerricson it doesnot send the request and after sometime gives symbian os error:-33
pls. let me know the solution!!
thanks
regards
bhaskar

A WAP access point means you're using a WAP stack, and you have to go through a WAP gateway to get to the internet. With an internet access point you use a TCP/IP stack and so you can "talk" directly to the internet. Look up tutorials about WAP if you want to know more.
But as far as your MIDlet is concerned, all you have to know is how to change the phone's configuration (manually I mean, not with the J2ME code), so that it uses an internet access point. I don't have a P900 lying around right now, so I don't remember exactly how to configure it, but I'm sure if you search through the SE forums you'll find an explanation,
shmoove

Similar Messages

N95 working Fine in Emulator but not in Device

Hi all,
I am creating a video based application for N95 which enable
running video(.3gp) in normal to rotate(90 degree) and display in
full mode so i tried it with Adobe Device Central's Emulator and it
is working fine (Note: Emulator was update on 24th sept and adobe
has released update on 22nd sept)
but in actual device it is not working fine (means rotation
is now happening) also i have updated N95's firmware from 21.0.016
to 30.0.015. my N95 has flash lite 3.0 standalone player too but
problem is same, kindly look at this..
Device : N95 with 1GB
Firmware : 30.0.015
Flash Lite Player: 3.0
OS: Symbian 9.2
thanks
Maneesh Panwar

Hi Maneesh,
Thanks for pointing this out, we'll look at it.
Mark

Auto numbering issue works fine in IE8 but not works in IE7 word apps plugin

Hi,
I have uploaded a word template on Share Point 2010 environment. In the view mode I am able to see the automated numbering however when I am
trying to select the edit mode, I cannot see the same behavior in IE7 means that the number format is disappear.But when copy text from the edit mode and paste it into local document it show the numbering.
It's working fine in IE8 .
Thanks in advance.

Hi SatyaMogalaou,
Whether this issue occurred on other machines with IE7.
Please set the site to Compatibility view on IE7, compare the result.
If this issue still exists, I suggest you update your IE 7 to IE 8+ for your SharePoint 2010.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Fixed headers while scrolling works fine in bids but not when deployed to reportserver

Hi, I am using SQL Server 2008 R2 & deploying a report to reportserver with fixed headers while scrolling, this works fine in bids but not when deployed to reportserver. We are IE 9.
Thanks in advance...............
Ione

Hi ione721,
Since you have identified the 2 xml files are identical, according to my knowledge, there maybe a compatibility issue with IE 9 and SSRS 2008 R2, so I suggest that you could run the report in compatibility mode. Please make sure you have turned on Compatibility
View in Internet Explorer 9 by following steps:
When Internet Explorer recognizes that a webpage is not compatible, you will see the Compatibility View button on the Address bar. Try clicking it.
When Compatibility View is turned on, the button changes from an outline to a solid color when you view the page.
The following screenshots are for your reference:
If you have any questions, please feel free to let me know.
Best Regards,
Wendy Fu

Why does iTunes keep giving me bogus error messages. "Your internet connection is not working, check your connection and try again." My internet is working fine. iTunes is not working and will not allow me to download tunes.

why does iTunes keep giving me bogus error messages. "Your internet connection is not working, check your connection and try again." My internet is working fine. iTunes is not working and will not allow me to download tunes.

This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013

My iCloud password is working on iPhone 5s but not working on iPhone 6 anybody help

My iCloud password is working on iPhone 5s but not working on iPhone 6 anybody help

Tony,
My first thought is to make sure that you are actually logged in using the same AppleID on both devices. Many folks share one AppleID for their family's iTunes Store account yet use another personal AppleID to log into iMessage settings and iCloud settings.
To confirm that the AppleID and password you are using is correct I would suggest visiting http://icloud.com and attempting to login there. If you get in, then you know for sure that that is a valid AppleID/password pair.
If that still doesn't reveal the issue then I would try opening Notes app on both iPhones, and then typing your password out where it can be seen clearly. This may reveal if your are typing it differently due to iOS 8 changes in the shift key indicator, or possibly that a screen protector or case is causing your touches to not register the same on both devices.
I hope these suggestions help.

My apple ID will work for uk itunes but not work for canadian itunes. Why?

My apple ID will work for uk itunes but not work for canadian itunes. Why?

http://www.apple.com/legal/internet-services/itunes/ww/

ITunes/Apple Mobile Device works fine w/iPod but not iPad

Hi. I'm getting stuck on this and would like some help to solving this problem. Basically I'm trying to sync my iPad; however, whenever I connect it, this meesage pops up: "this iPad cannot be used because the Apple Mobile Device is not started." The problem is that when I try to plug in an iPod using the same wire, it works fine, no problem, but the iPad just won't connect. I have since uninstall and reinstall all Apple components (iTunes, AMD, QuickTime, etc) and it's still the same thing...iTunes connects fine w/ the iPod, but not the iPad. What to do? Thnx in advance.
EDIT:
Btw, I've tried to connect the iPad while the iPod is connected, and the "Apple Mobile Device is not started" error message pops up too, which is weird, because the iPod is connected and syncing at that time...which means the Apple Mobile Device thing IS started. >.>

The iOS devices use Apple Mobile Device Service, while older iPods use the iPod Service.
Checkout this Apple document -> How to restart the Apple Mobile Device Service (AMDS) on Windows
Are you able to restart the service after following the steps in that article?

Query working fine in toad but not in forms 6i

i have following coding on when button press triger
declare
CURSOR C1(year number,month number) IS
SELECT ITM_NO,ITM_NAME,XAQ QTY,XAQ*TP VAL,gp
FROM
select ci.itm_no ITM_NO,ci.itm_name ITM_NAME ,cpg.group_id gp ,xaq ,ALLIED.CORP_PRIC_TP( ci.itm_no)TP from
select prod_no,sum(xaq)*1 xaq
from
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_01_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_02_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_03_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_04_02
where year=year and f_prd=month
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
group by prod_no
) A,allied.corp_inv ci,allied.corp_01_01 c01, allied.corp_01_02 c02,allied.corp_prod_group cpg,allied.v_prod_grp vpg
where ci.itm_no=a.prod_no
and ci.itm_no=c02.itm_no
and c01.grp_id=c02.grp_id
and c01.grp_id in(55,56,57,58,59)
and vpg.prod_no =ci.itm_no
and vpg.group_id=cpg.group_id
where XAQ <>0;
Begin
     delete from fiaz.tmp_topten_prod;
     for i in c1(:year,:month)
loop
          insert into fiaz.tmp_topten_prod
          values(i.itm_no,i.itm_name,i.qty,i.val,i.gp,0);
     end loop;
standard.commit;
message('inserted in temp');
     exception when others then
          message (dbms_error_text);
          message (dbms_error_text);
End;
Same Query (as used in cursor c1) works fine in toad but giving wrong result from forms... and the problem is xaq field i.e returns incorrect qty...
i guess union clause is not working in this situation...
plz suggest me the appropriate changes in the query to work well from form as well...
combination:Forms 6i,Oracle 8.0.6
Regards,
Usman Afzal

As per your suggestion i have created a stored procedure but the followin error prevents procedure creation
create or replace procedure fiaz.topten_prod(v_yr number,v_mn number) is
begin
delete from fiaz.tmp_topten_prod;
insert into fiaz.tmp_topten_prod(itm_no,itm_name,qty,val,grp_id,prority)
SELECT ITM_NO,ITM_NAME,XAQ QTY,XAQ*TP VAL,gp,0
FROM
select ci.itm_no ITM_NO,ci.itm_name ITM_NAME ,cpg.group_id gp ,xaq ,ALLIED.CORP_PRIC_TP( ci.itm_no)TP from
select prod_no,sum(xaq) xaq
from
select prod_no, sum(nvl(xrd_sqty,0)) Xaq from allied.mrk_01_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_02_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_03_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
union all
select prod_no, sum(nvl(xrd_sqty,0)) Xaq
from allied.mrk_04_02
where year=v_yr and f_prd=v_mn
and area_id in (10200,10400,10100,10300,10500,20500,20300,20100,20200,20400,30100,30400,30300,30200)
group by prod_no
group by prod_no
) A,allied.corp_inv ci,allied.corp_01_01 c01, allied.corp_01_02 c02,allied.corp_prod_group cpg,allied.v_prod_grp vpg
where ci.itm_no=a.prod_no
and ci.itm_no=c02.itm_no
and c01.grp_id=c02.grp_id
and c01.grp_id in(55,56,57,58,59)
and vpg.prod_no =ci.itm_no
and vpg.group_id=cpg.group_id
where XAQ <>0;
commit;
end;
Error:
"PLS-00201: identifier ALLIED.MRK_01_02 must be declared "
i have not changed any thing in query working fine in toad without create procedure text and if i describe this table it shows the structure (desc allied.mrk_01_02)
Now where is the problemmmmm
Plz Help

Can't FLIP a quick RENDER! Works fine in SHAKE but not to flip or Disk!

Learning with Lynda.com!
Part 1 has you rendering two files, one is a still image, the other a quicktime movie, I don't have the money for premium so I got my own clouds movie (.mov) and added a still plane.
I key framed 1 - 100 and playing it back its fine in shake, but not on FLIP or DISK, its nothing but a still image. Have done it 5 times making sure that all the right buttons are on, or not, and as I said, it works INSIDE of shake but won't RENDER to FLIPBOOK!
I don't suppose anyone wants to send me the exercise files? (on knees begging LOL) I am a member, just can't afford $300 for one pop and this is really the only program I need to learn.
Thanks!

Sorry if I'm pointing out something obvious that you already know. Have you checked the time range in the render dialog? Shake does not fill in the values for you automatically, and defaults to "1" so only renders the 1st frame. It needs to be set to eg "1-100".

Apple TV working fine with Wireless, but not on Ethernet

I just got an Apple tv for my B-day and I can't get the Ethernet port to work.
It works fine on wireless but if i plug in the cable to my 5 port switch that then goes to my router it will not login to the store, or sync or fine youtube. It has and ip and everything. I tried opening that port 38 something. And no go? Does anyone have any ideas?
I have a 2wire router, and one 5 port switch, the PS3, Wii and Xbox all work on the switch just fine.
I even upgrade to firmware 2.01

Thanks for your help guys
I have tried another ethernet cable but no go. I'm going to get a new one at the store today. As for the IP. the first time I plugged it in the IP was way diffrent from the one on my router so i manually added the new ip and subnet mask etc etc. And still no go. It is seen in itunes but tells me it can't sync. And if i go to the Apple TV it will not open any of the web enabled features. No you tube, no store, no nadda.

Can't delete file after renaming due to Word file handle still present. Error staes document is still in use but it's really not. Worked fine in 2007 but not in 2010.

I have some code associated with a Word Template. The template is opened, filled out and saved via a routing in vba. This all works fine in older 2007 version (which is version it was originally created in). Once this file is saved, the user can change the
date in a text box and re-save document. The code saves using the new date for part of new file name and then deletes that older file from the server. It fails at the delete function because the newer version of word is not dropping the file handle from the
first named file when user saves it to the new filename. In older version (2007) this handle was released as soon as file was saved to a different name. I can't seem to figure out how to release the old document filename so the old document file can be deleted.
I hope I explained this well enough.
Here's the code that woeked in version 2007 but fails in version 2010.
Option Explicit
Dim CAPEX01 As MSForms.ComboBox
Dim CAPEX02 As MSForms.ComboBox
Dim LocalPath As String
Dim NetPath As String
Dim OldPath As String
Dim OldPathNet As String
Dim DocName01 As String
Dim DocName02 As String
Dim DocName03 As String
Dim DocName04 As String
Dim DocName As String
Dim DocNameold As String
Dim TestDocName As String
Dim filesys
Dim newfolder
Sub AutoOpen()
ActiveDocument.ActiveWindow.View.Type = wdPrintView
TestDocName = ActiveDocument.TextBox2
OldPathNet = "\\yourPath\" & TestDocName & "\"
End Sub
Sub AutoNew()
TestDocName = ActiveDocument.TextBox2
OldPathNet = "\\yourPath\" & TestDocName & "\"
ComboBox1.Locked = False
ComboBox1.Enabled = True
FillList1
FillList2
End Sub
Sub DeleteOldDoc()
OldPathNet = "\\yourPath\" & TestDocName ' & "\"
DocNameold = OldPathNet & TestDocName & "-" & DocName02 & "-" & DocName03 & "-" & DocName04 & ".doc"
    If Not TestDocName = DocName01 Then
        Set filesys = CreateObject("Scripting.FileSystemObject")
    If filesys.FileExists(DocNameold) Then
        filesys.DeleteFile (DocNameold), True
'I get file permission error here
    End If
    End If
If DocName01 <> "" Then
If Not TestDocName = DocName01 Then
If Not TestDocName = "" Then
    MsgBox "Project Proposal Has Been Moved From Year " & TestDocName & " To " & DocName01 & ""
End If
End If
End If
TestDocName = DocName01
End Sub
'''''''Document path functions''''''
Sub chkpath()
Set filesys = CreateObject("Scripting.FileSystemObject")
If Not filesys.FolderExists("\\yourPath\") Then
   newfolder = filesys.CreateFolder("\\yourPath\")
End If
If Not filesys.FolderExists("\\yourPath\" & DocName01 & "\") Then
    newfolder = filesys.CreateFolder("\\yourPath\" & DocName01 & "\")
End If
End Sub
''''''Save Function''''''
Private Sub CommandButton1_Click()
DocName01 = ActiveDocument.TextBox2
DocName02 = ActiveDocument.TextBox4
DocName03 = ActiveDocument.TextBox1
DocName04 = ActiveDocument.ComboBox1.Value
chkpath
NetPath = "\\yourPath\" & DocName01 & "\"
DocName = NetPath & DocName01 & "-" & DocName02 & "-" & DocName03 & "-" & DocName04
ActiveDocument.SaveAs2 FileName:=DocName, FileFormat:=wdFormatDocument
ComboBox1.Locked = True
ComboBox1.Enabled = False
ComboBox2.Locked = True
ComboBox2.Enabled = False
TextBox1.Locked = True
TextBox1.Enabled = False
TextBox3.Locked = True
TextBox3.Enabled = False
TextBox4.Locked = True
TextBox4.Enabled = False
DeleteOldDoc
End Sub
Sub FillList1()
Set CAPEX02 = ActiveDocument.ComboBox2
With CAPEX02
      .AddItem "CASTING", 0
      .AddItem "HOT ROLLING", 1
      .AddItem "COLD ROLLING", 2
      .AddItem "FINISHING", 3
      .AddItem "PLANT GENERAL", 4
      .AddItem "MOBILE EQUIPMENT", 5
End With
End Sub
Sub FillList2()
Set CAPEX01 = ActiveDocument.ComboBox1
With CAPEX01
      .AddItem "A Name", 0
      .AddItem "Another Name", 1
End With
End Sub
Private Sub CommandButton2_Click()
    UserForm1.Show
End Sub

mogulman52 and Don,
I went back and looked at my code and had already updated it to SaveAs in the new docx format. It still holds the lock handle in place until Word closes, unlike earlier versions which released the lock handle when you did a SaveAs.
As a note, all my Word and Excel macro-enabled (dotm & xltm) templates are read only and are never filled in, prompting the user for a file name on any close event or if they run the code gets auto-named. I do the SaveAs and concatenate the file name
from data on the document (or sheet) that has been filled in. During the SaveAs the docx gets saved to a network folder and also on a local folder. The lock gets renamed to the filename and remains until Word is closed.
So my code still fails at the point noted below while trying to delete an old filename version after the file has been saved as a new filename in a new folder. So....
The code is looking in the last folder where the docx file was saved for the older filename so it can be deleted. The newest docx version has already been saved in a different folder and has a new lock handle of its own. That lock is not my problem, it's
the older file lock which really exists in the same folder as the first filename that the docx was saved to. It does not release that lock until I exit Word. My work around has been to instruct all users to manually delete the older version file.
The other odd thing is this only happens when I run it from code, if you manually go through these steps with the SaveAs menu drop-downs in Word it will release the lock handle???
Hope this isn't to confusing and thanks for all your suggestions and help.
Sub DeleteOldDoc()
OldPathNet = "\\yourPath\" & TestDocName ' & "\"
DocNameold = OldPathNet & TestDocName & "-" & DocName02 & "-" & DocName03 & "-" & DocName04 & ".doc"
If Not TestDocName = DocName01 Then
Set filesys = CreateObject("Scripting.FileSystemObject")
If filesys.FileExists(DocNameold) Then
filesys.DeleteFile (DocNameold), True 'I get file permission error here- lock handle is still present from last SaveAs command in last folder where previous version of file was saved.
End If
End If
If DocName01 <> "" Then
If Not TestDocName = DocName01 Then
If Not TestDocName = "" Then
MsgBox "Project Proposal Has Been Moved From Year " & TestDocName & " To " & DocName01 & ""
End If
End If
End If
TestDocName = DocName01
End Sub
Glenn

Tbird will not send. unnown error. works in safe mode. turned off firewall and still does not work. works fine on desktop but not laptop

cannot send on laptop. desktop, with same settings, works fine. getting unknown error on send. please help. here is the setup from the help function.
thanks,
tim
WARNING:
This contains sensitive information which shouldn't be forwarded or published without permission.
Application Basics
Name: Thunderbird
Version: 31.4.0
User Agent: Mozilla/5.0 (Windows NT 5.1; rv:31.0) Gecko/20100101 Thunderbird/31.4.0
Profile Folder: C:\Documents and Settings\Tim\Application Data\Thunderbird\Profiles\dhtmqpol.default
(Local drive)
Application Build ID: 20150109111741
Enabled Plugins: about:plugins
Build Configuration: about:buildconfig
Memory Use: about:memory
Mail and News Accounts
account1:
INCOMING: account1, Tim Corey, (imap) imap.gmail.com:993, SSL, passwordCleartext
OUTGOING: smtp.gmail.com:465, SSL, passwordCleartext, true
account2:
INCOMING: account2, Local Folders, (none) Local Folders, plain, passwordCleartext
Crash Reports
Extensions
Important Modified Preferences
Name: Value
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size_cached_value: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
extensions.lastAppVersion: 31.4.0
gfx.blacklist.direct2d: 3
gfx.blacklist.layers.direct3d10: 3
gfx.blacklist.layers.direct3d10-1: 3
gfx.blacklist.layers.direct3d9: 3
gfx.blacklist.layers.opengl: 3
gfx.blacklist.stagefright: 3
gfx.blacklist.suggested-driver-version: 6.1400.1000.5218
gfx.blacklist.webgl.angle: 3
gfx.blacklist.webgl.msaa: 3
gfx.blacklist.webgl.opengl: 3
mail.openMessageBehavior.version: 1
mailnews.database.global.datastore.id: 7bba5461-432a-473f-a4e4-9a009dfee73
mailnews.database.global.indexer.enabled: false
network.cookie.cookieBehavior: 2
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1375374210
places.history.expiration.transient_current_max_pages: 78086
plugin.importedState: true
privacy.donottrackheader.enabled: true
Graphics
Adapter Description: Mobile Intel(R) 945 Express Chipset Family
Vendor ID: 0x8086
Device ID: 0x27ae
Adapter RAM: Unknown
Adapter Drivers: igxprd32
Driver Version: 6.14.10.4926
Driver Date: 2-15-2008
WebGL Renderer: Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
GPU Accelerated Windows: 0. Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
AzureCanvasBackend: skia
AzureSkiaAccelerated: 0
AzureFallbackCanvasBackend: cairo
AzureContentBackend: cairo
JavaScript
Incremental GC: 1
Accessibility
Activated: 0
Prevent Accessibility: 0
Library Versions
Expected minimum version
Version in use
NSPR
4.10.6
4.10.6
NSS
3.16.2.3 Basic ECC
3.16.2.3 Basic ECC
NSS Util
3.16.2.3
3.16.2.3
NSS SSL
3.16.2.3 Basic ECC
3.16.2.3 Basic ECC
NSS S/MIME
3.16.2.3 Basic ECC
3.16.2.3 Basic ECC

Thanks for the reply. here is the behavior for all steps:
1. use oper. system safe mode: it works, I can send email
2. no oper. sys. safe mode, t'bird safe mode: cannot send mail
3. no oper. sys safe mode, no t'bird safe mode, all addons disabled: cannot send mail.
It only works when i use oper. sys. safe mode.
Addons for t'bird were enabled in this test.
(Not using T'bird safe mode either in this test.)
Use BitDefender antivirus, which does not have a setting to turn on/off email scanning. Should I contact BD support? (it seems to point to BD as causing the problem. Interesting that I don't have this problem on 2 other desktops, only the laptop. And in the past, T'bird worked on the laptop. I have tried uninstall and reinstall, but mozilla is SAVING all my account and other info, so I cannot do a clean install. it seems to me that if I could do a clean install, it might work. Any idea how to remove all the data and uninstall?
thanks,
tim

Works fine in debug but not when published

So I have simple navigation code setup to step through frames (I'm using Flash instead PowerPoint--too many pictures that are PSDs and illustrations that are AIs to do the conversions over to something PowerPoint understands).
The code:
stop();
stage.addEventListener(KeyboardEvent.KEY_DOWN, slideNav);
function slideNav(event:KeyboardEvent):void
switch (event.keyCode)
case Keyboard.DOWN:
   nextFrame();
   break;
case Keyboard.UP:
   prevFrame();
   break;
case Keyboard.HOME:
   gotoAndStop(1);
   break;
case Keyboard.END:
   gotoAndStop(this.totalFrames);
   break;
When I test it using the debug (Ctrl+Shift+Enter) it works fine. When I publish it, the up and down arrows work but the Home and End keys do not work. They do nothing, no error messages, nothing.
Using Flash CS4 Pro 10.0.2. ActionScript 3. Windows 7 64-bit.
Any suggestions?
Thanks.

Nevermind. That was stupid of me. Have to disable the keyboard shortcuts or it doesn't work.

Report runs fine in Analyzer but not working when executed fromQuerydesig

Hi,
I have a issue with the Bw report which is not showing any data for Keyfigureswhen i execute the report related to APO from Bex query designer in Web.
But the same report executes fine in the Bex Analyzer.
If any one has faced this issue earlier,update us reg that.
We are doubting any prob related to catch memory as the java link for the report is not working.Report works fine in RSRT.
Vamsi

Hi there,
Can you please let us know what cache settings you changed, as we are having the same issue.
Many thanks

MIDLET working fine in emulator but not working on mobile!

Similar Messages

Maybe you are looking for