Midp 2.0: is it possible to run 2 timers at the same time?

elo! jz wondering if its possible to run 2 timers at the same time..

actually, im going to use the first timer for the character's animation such as walking.. the other timer i'll use for timing the 'walking activity' of the character (let's say, 3 seconds walking).. after 3 seconds, the character will stop and do other activity aside from walking..
p.s.
im mentioning about timers in midp 2.0 :)

Similar Messages

  • Is it possible to run two applications at the same time on ipad.

    Hi,
    I would like to know of it is possible to play media apps (movies or bbc iplayer programs) while surfing the Internet with safari on ipad2. Even if I can't actually see the video while I'm surfing the net but can still hear it and can jump between the Internet and the movie without the movie stopping.
    Somehow I think the answer to this is no but then I also thought it wasn't possible to do print screen images with ipad until someone showed me how.
    Can anyone help?
    Thanks :)
    Locard

    Prior to iOS 6, it was possible to "multitask" with some media like playing audio from YouTube video while playing a game or surfing the web, but it changed in iOS 6.
    There are always a few surprises in major iOS releases, so who knows, it might work again in iOS 7. I never set my expectations for anything other than what Apple talks about publicly, but like I said, you never know.

  • Is It Possible To Run 2 Routers At The Same Time.

    This might be the dumbest question of all time but I am not computer savy. My two wireless PCs operate beautifully on my Linksys WRT54G. If, when I get the MacBook Pro, and for some strange reason I have connection proglems, can I get one of the airports and set it up just for the Mac. Read all sorts of problems of PCs not connecting to the Airports properly. I might be overly concerned but I don't have an Apple Store near me. I am driving 200 miles to Charlotte to justr try out and buy the Mac.

    You can put two routers on the same network, but you have to set them up correctly. You can put one of them in bridge mode, which means it will just act as an access point for the primary router, but won't do any routing itself. The second way is to set up a double NAT, with one router handling the Internet connection to the outside world and the second router handling the local network.

  • Its possible to stream one video at the same time to three appletv2?

    Its possible to stream one video at the same time to three appletv2?

    Welcome to the Apple Community.
    You can't stream a movie to more than one device at a time from iTunes. You can however stream the same (or indeed a different) movie from multiple Apple TVs although they won't necessarily be in sync.

  • Can i run two widgets at the same time on the same page?

    Can i run two widgets at the same time on the same page?
    Hi
    I have created and published 4 free ibooks and i would to run two widgets
    - a countdown clock
    - a review test
    at the same time on the page. Can i do that?
    Thanks in advance
    Haris

    thanks for your answer. Yes indeed HTML widgets run only full screen (snif snif). I consider this as a "distinguishing treatment".
    One solution  i read !!!!! was to create through keynote a countdown clock, to export to quicktime move and to imported at iBA predefined widgets. of course this is not the solution i need.
    So, in order to have at the same widget and run together a count down clock and a preview test (20 questions)  i must
    1)"hack" the preview widget and insert a countdown clock
    2) create a preview test using iAD.....
    thanks again
    haris

  • HT1752 Hi, I want to play my music through my Comp as well as my wireless speaker.. i can only seem to get one working at a time, is it possible to get both working at the same time??  Thanks Kylie

    Hi, I want to play my music through my Comp as well as my wireless speaker.. i can only seem to get one working at a time, is it possible to get both working at the same time??  Thanks Kylie

    Hi Kylie,
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

  • Run two VIs at the same time

    Hello!
    I want to know how i can run two VIs at the same time.
    I mean that i want to run a second VI ( N.2) while another VI (N.1) is in
    execution without suspend it (N.1)
    If anyone has suggestions, please help me!
    Thank you very much.
    roby.

    If you say "run a vi", I assume that you have the VI open in LabVIEW, then press the run button. (Some of the earlier answers taks about programmatically calling VIs, which I don't think is the focus of your question)
    You can run as many VIs as you want at the same time. Simply press the run button of the second VI and they will both run.
    Of course you should ensure that they don't use the same resources (e.g. DAQ device, or listen on the same TCP port, etc.) In these cases, the second VI might fail. (Also if the second VI is a subVI of the first VI, you won't be able to run it seperately, because it will be already running.)
    LabVIEW Champion . Do more with less code and in less time .

  • My MacBook is almost two years old and has started running really slow. It gets bogged down when it is running different programs at the same time, like Safari and Pages. It didn't react this way until recently. Any advice would be very welcome.

    My MacBook is almost two years old and has started running really slow. It gets bogged down when it is running different programs at the same time, like Safari and Pages. It didn't react this way until recently. Any advice would be very welcome.

    Launch Disk Utility and select the icon of the internal drive (the drive itself, not the volume icons below it.) Is the SMART status "Verified?" If not, replace the drive immediately. If the status is "Verified," the drive may still be failing. Back up all data, if you haven't already done so. Reinstall Mac OS X, then run Software Update. Test with all wired peripherals disconnected. If it's still slow, you have a hardware problem.
    Mac OS X 10.6 Help: Reinstalling Mac OS X

  • Could Compressor run several jobs at the same time?

    everytime when I use the batch export function, I found it just will convert the clips one by one only. would it be possible to process several jobs at the same time in order to save time?
    Thanks

    Hello Jiqiu,
    Please respond back in this duplicate thread if you have further questions.
    Gerardo O.
    RF Systems Engineering
    National Instruments

  • Scoping out Sharepoint - Is it possible to run web apps in the same domain as a web page? (ie not with references to a cloud)

    From what I understand, with sharepoint it is possible to run web apps on the server that don't need to be referenced via the cloud, ie in contrast to SkyDrive.
    If so, would it be possible to create a web site on the share point server that embeds say a word web app in a page, all done in the one server, on the same domain?
    Thanks

    Hi,
    First Office Web Apps and SharePoint can't be installed in one server as it's not supported. So you need at least two servers - one for SharePoint and another for Office Web Apps. About 'word web app', As far as I know you can run word app/excel app runs
    in either word/excel but not inside Office Web Apps.
    Thanks,
    Sohel Rana
    http://ranaictiu-technicalblog.blogspot.com

  • Can device run multiple encryptions at the same time?

    I have a G5 at home and I'm considering hooking up a new Airport Extreme to enable wirelsss access from my work laptop (WIN PC). I use a Netgear 54MBPS Wireless PC card WG511 v2 which supports 128bit encryption. Should this work with the mac APE and if so can I also run other encryption modes at the same time in future if needed. I will be connecting the APE to my cable modem and using one of the LAN ports to connect to the G5.

    Thanks Don, at this stage I'm only using the Netcomm wireless but maybe in future I might go for the iTV or add another computer.
    Rob

  • How do i run 2 profiles at the same time?

    i have 2 profiles created but i want to run 2 separate profiles at the same time and i cant figure out how...... :-( Please help!!
    Thanks
    Ron

    Use the -no-remote command line switch to open another Firefox instance with its own profile and to run different Firefox instances simultaneously.
    * http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
    * http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
    * http://kb.mozillazine.org/Bypassing_the_Profile_Manager

  • How can I run  other applications at the same time as downloading email

    When I open my computer if I check mail on entourage first and there are 30+ messages I can not use other apps at the same time as the mail is downloading, is there a way to have email operating in the background. Curiously if I am using another application and a mail comes in , the first app runs with mail running in the background , Why is this not the case when Entourage is the first program running and it is downloading mail.

    http://www.officeformac.com/ProductForums/Entourage/ Alternatively, don't launch it at login, launch it after logging in.

  • "Newbie" Unable to run two actions at the same time please help

    Hello
    I'm a newbie (2 weeks) on Labview, so I hope my problem will sound easy for some of you.
    I want to read a file and at the same time get the reading from my sensors (4 sensors).
    My program is working when I do each thing in a different program but when I add them the program only read the text file and stop reading the sensor signals...I attach the program file.
    The goal is with the text file to add an exact time for each sensor signal I record.
    Is there any other possibilities to include a time with the sensors signals recorded ? I need to do this to synchronize the sensors values with CAM program.
    Thanks
    /Xavier
    Ps I used a scan rate of 12000/s but I try 1000/s
    and the sensor acquisition is still not working
    Attachments:
    test3Rdif2802.vi ‏493 KB
    readfile.txt ‏195 KB
    sensoracquisition30s.txt ‏210 KB

    from a glance at your code, it appears that you have nested a loop to read your file, inside a loop to read your sensors. this means the nested loop to read your file must finish before the outside loop to read your sensors can run through another iteration. what you want to do is separate the two loops to run independently of each other (in parallel). use a global variable to know when to stop the loop (if they need to stop at the same time) and if you need to pass data between the loops use a queue (easiest) or you can also use globals with semaphores.

  • Can i run two PIDs at the same time?

    Hi
    I want to control speed of the rotating shaft and force applied by the pneumatic cylinder using two different PIDs from the same program.
    I managed to get two PIDs to work separatly using PID control loop VI`s supplied with labview 6.1 (I got Kc, I and D right, so there is no overshoot). When I try to run both PIDs within my vi they don`t work. I again tried various gains and managed to get one PID to work but not the other. Then through trial and error I managed to get a second PID to work but I had to change refresh time of the FOR loop from 100msec to 1msec.
    Does anyone have experience with running two PIDs in the same program? Does the timing of the FOR loop influence PID contorller? Does equiring of other data while
    running PID has effect on the PID?
    I would really appreciate any comments/help. I am pretty thrustrated at this time
    Thanks

    I don't know whcih PID vi's you are using but I had similar problems. I
    solved it by going to the VI properties of the PID subvi, select category
    execution and make sure that reentrant execution is selected. Only then two
    instances of the PID vi can run without interfering each other.
    Martien
    solved by setting the execution mode
    "smartlander" wrote in message
    news:[email protected]..
    > Hi
    >
    > I want to control speed of the rotating shaft and force applied by the
    > pneumatic cylinder using two different PIDs from the same program.
    > I managed to get two PIDs to work separatly using PID control loop
    > VI`s supplied with labview 6.1 (I got Kc, I and D right, so there is
    > no overshoot). When I try to run
    both PIDs within my vi they don`t
    > work. I again tried various gains and managed to get one PID to work
    > but not the other. Then through trial and error I managed to get a
    > second PID to work but I had to change refresh time of the FOR loop
    > from 100msec to 1msec.
    > Does anyone have experience with running two PIDs in the same program?
    > Does the timing of the FOR loop influence PID contorller? Does
    > equiring of other data while running PID has effect on the PID?
    > I would really appreciate any comments/help. I am pretty thrustrated
    > at this time
    > Thanks

Maybe you are looking for

  • Hp envy 5531 Will No Longer Scan or Copy

    So far I had really enjoyed using my HP Envy 5531 Printer. However,  about a month or two ago my printer's screen showed that it had an update available. I went ahead and told it to do the update, but now my printers scan and copy functions no longer

  • Installing a new hard drive and using Time Machine to Restore system

    I just upgraded a Macbook (2006) hard drive and had problems importing the Time Machine backup. The problem was that the initial install discs were for Tiger, which did not support Time Machine. After numerous attempts at a work-around I solved this

  • Bridge does not open and computer crashes

    Please help. I have Photoshop CS3 and when I try to open Bridge in any way it never opens and then whole computer crashes. I have to push and hold the power button to turn off and then restart the whole thing. I can use PS but must open pictures with

  • Logic Freezes During Playback w/ Disk Too Slow Error

    I'm trying to mix a song in Logic 9.1.7, but it has gotten to the point where Logic immediately freezes as soon as I hit the playback button in order to actually listen to my project. Before this I was occasionally getting the Sudden Motion Sensor/ D

  • Feature request for mobile devices design

    Hi The most frequently question what I have from my clients is that to prepare AI files for a developers team. So what they want is bunch icons/assets/background extracted from Illustrator to PSD/PNG files ready to use for to assembly UI/UX code... S