Mifi 2200 - Error 691: Connection Failed - Access was denied ...

I have set up a Mifi 2200. It CAN work great. Intermittently though, I can't get connected wheen using the device as a USB modem. It will ALWAYS connect fine when I connect through Wifi.
The error I get: Mifi 2200 - Error 691: Connection Failed - Access was denied because the username and/or password was invalid in the domain.
I have done all the usual things:
1. Reinstalled the VZAccess Manager software including latest update. I am at 7.3.13.1 (2635a)
2. Obtained all latest Windows updates (XP SP2).
3. Removed, replaced, manually, auto-configured a Dial Up Connection many times.
4. Replaced the USB to microUSB cable.
I found the VZAccess Managers diagnostic tool where you press CTRL-D and enter the password diagvzw and see some additional settings.
There I had a minor break through. There is a setting where I can force the modem to only use 1X. If I do that, I connect every time without fail. No problems, no errors. The moment I put that setting back to Auto or forced EVDO, I fail again, or only work every 20th try or so after a reboot of the device etc.
Is anyone else seeing this, or getting this error? It can't be an account issue since it works sometimes on EVDO and ALWAYS fine on 1X.
Thanks for any help or ideas.
PN

I think I have an update that might be a clue that it IS an Verizon issue either with the device itself or at the towers.
I have determined that when I connect to it through WiFi where I mentioned it seems to ALWAYS work. Well, it always works in 1X mode there. It fails in EVDO mode.
Something up at the towers? Although multiple towers have been tried.
Anyone any ideas?

Similar Messages

  • A client made a DirSync LDAP request for a directory partition. Access was denied due to the following error

    We started getting this error when we installed Lync Server. I already verified that the "RTCHSUniversalServices" group has “Replicating Directory Changes" permission.
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    A client made a DirSync LDAP request for a directory partition. Access was denied due to the following error.
    Directory partition:
    DC=<domain>,DC=com
    Error value:
    8453 Replication access was denied.
    User Action
    The client may not have access for this request. If the client requires it, they should be assigned the control access right "Replicating Directory Changes" on the directory partition in question.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Domain Controllers and Lync server are running on Windows 2008 SP2. Any other things that I could check?

    A client made a DirSync LDAP request for a directory partition. Access was denied due to the following error.
    Directory partition:
    DC=<domain>,DC=com
    Error value:
    8453 Replication access was denied.
    User Action
    The client may not have access for this request. If the client requires it, they should be assigned the control access right "Replicating Directory Changes" on the directory partition in question.
    oas4ever

  • Load report failed Access is denied ErrorCode -2147467259

    We've developed an ASP application with several reports that access SQL Server data.
    I getting this error:
    Load report failed Access is denied ErrorCode -2147467259
    only on my development machine. 
    I've checked every permission on every folder I can think of and I'm out of ideas. 
    BTW, the reports are working just fine on the Webserver.  This problem is only occuring on my local machine.
    Sandra

    This is the line where I get the exception error
    (Request.PhysicalApplicationPath & "MultiGeneral.rpt")
       'General Report
                crReportDocument = New ReportDocument
                Dim i As Integer    'TEMP
                i = crReportDocument.FileName.Length    'TEMP  
                crReportDocument.Load(Request.PhysicalApplicationPath & "MultiGeneral.rpt")
    (Request.PhysicalApplicationPath & "Robots.txt")
    crReportDocument.SetDatabaseLogon("intake", "password")
                If IsDBNull(Session.Item("ClientNumber")) Then
                    crReportDocument.SetParameterValue("ClientNum", "")
                Else
                    crReportDocument.SetParameterValue("ClientNum", Session.Item("ClientNumber"))
                End If
                If IsDBNull(Session.Item("CaseNumber")) Then
                    crReportDocument.SetParameterValue("CaseNum", "")
                Else
                    crReportDocument.SetParameterValue("CaseNum", Session.Item("CaseNumber"))
                End If
                crReportDocument.SetParameterValue("Followup", "0")
                crReportDocument.SetParameterValue("OrgName", "Albuquerque Metro Central Intake")
                'mfs crReportDocument.SetParameterValue("PrintCompScores", True)
                crDiskFileDestinationOptions = New DiskFileDestinationOptions
                Fname = "c:\exports\" & Session.SessionID.ToString & "_ASI1General.pdf"
                crExportOptions = crReportDocument.ExportOptions
                With crExportOptions
                    .DestinationOptions = crDiskFileDestinationOptions
                    .ExportDestinationType = ExportDestinationType.DiskFile
                    .ExportFormatType = ExportFormatType.PortableDocFormat
                End With
                crDiskFileDestinationOptions.DiskFileName = Fname
                crReportDocument.Export()
                crReportDocument.Dispose()

  • Hi,  I have keep seeing a small 'Connection failed'  warning box popping up: [[Connection failed  There was an error connecting to the server "Warning; Self Aware"]].  Question for you gods - what does it mean. is it important?  my computer connects to my

    hi,  I have keep seeing a small 'Connection failed'  warning box popping up: [[Connection failed  There was an error connecting to the server "Warning; Self Aware"]].  Question for you gods - what does it mean. is it important?  my computer connects to my server works.  Could it be related to  "Network Preference & Monitor icons missing from my system preferences page?  and my guest sign=in account is now the main account??     thanks you. jb

    hi,  I have keep seeing a small 'Connection failed'  warning box popping up: [[Connection failed  There was an error connecting to the server "Warning; Self Aware"]].  Question for you gods - what does it mean. is it important?  my computer connects to my server works.  Could it be related to  "Network Preference & Monitor icons missing from my system preferences page?  and my guest sign=in account is now the main account??     thanks you. jb

  • N8 Belle connection failed- access denied. NO INTE...

    After the Belle update I have a problem with my internet connections. Both WiFi and mobile internet are not working at all. At first it was ok but after a while or a reboot of the device I simply cannot connect to any wifi wether it's a known one or an open one. I always get an box message on the top of the screen that says 
    "Connection failed
    Access denied"
    There's nothing I can do about it! I tried reinstalling Belle and it was ok at first but shortly the problem occurred. So I have a phone with NO INTERNET CONNECTION at all!!! It's almost useless.
    I would like a nokia support response please. This is a huge problem! 
    Solved!
    Go to Solution.

    Posts: 3
    Re: N8 Belle connection failed- access denied. NO INTERNET![ Edited ]
    19-Feb-2012 11:12 AM - last edited on 19-Feb-2012 11:30 AM
    Hi Torben
    Thank you for contacting Nokia Care customer support.
    Since we wrote last I have got a lot more experience with the Belles situation in this area.
    Recently suspicion fell on a bug in old saved data from the "Anna" that causes general network error.
    To solve it, there must be a backup - but NOT the programs / settings, since they bear the error.
    Subsequently, disconnect the phone from, select the Offline profile (Press and hold the cards on the off button and choose the one on this list)
    "Ring" now * # 7370 # accept and enter the security code is 12345, if it asks for it.
    Your security code if you have change it.
    Set Time & Date and reviewing start-up menus.
    Get immediately sent to the settings for data and multimedia.
    Restart your phone and try now about the Internet is working properly.
    Do they do it; you can safely restore contacts and whatever else you have in your backup.
    I would personally appreciate it if you want to participate in a brief survey that will be about my response to you. Customer survey will receive a separate e-mail.
    If there is anything I can do for you, then you're obviously more than welcome to contact me again.
    Sincerely
    Jannik Petersen
    Nokia Care
    Thanks, these steps resolved my Connectivity issues

  • Creating new Data Source Error - Database connection Failed

    Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev.
    Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source.
    Entered all info about the application database , etc. Getting error "The database connection failed" (I was able to connect with no problem during the install)
    SQL server 2005 is on the same physical server.
    The diagnostic tool shows database connection passed for planning. A new database was created for the new application.
    The server event viewer shows these errors.
    "Login failed for user 'xxx-hyperion'. The user is not associated with a trusted SQL Server connection."
    Group Policy Error "The client-side extension could not apply computer policy settings for 'Default Domain Policy {xxx}' because it failed with error code '0x80070003 The system cannot find the path specified.' See trace file for more details. "
    The Group Policy client-side extension Group Policy Services failed to execute. Please look for any errors reported earlier by that extension.
    Any help is appreciated.

    Datasource for the application.
    I have created a sql db for this planning application (my datasource). See my first message for more details.
    When you create a new planning application, you need to associate it with a data source. Since this is a new install, I don't have any data sources available yet.
    So, "To create, edit or delete data sources, click Manage Data Source."
    This page lets you validate your connection to the database and essbase server. My essbase server connection validates! The database connection does not validate after I enter all the relevant information.
    SCREEN INFO BELOW
    Fields displayed with an asterisk (*) are mandatory.
    Data Source Name *:
    Data Source Description:
    Select Database Platform
    Microsoft SQL Server
    Application Database
    Server * :
    Port * :
    Database *:
    User *:
    Password *:
    Click "Validate Database Connection"
    ERROR ---> Database connection failed.
    So it does not let me create a data source for my new planning application, so I cannot create a new planning application.
    Thanks in advance.

  • Error "NetAuthSysAgent: ERROR: AFP_GetServerInfo - connect failed 64"

    Error ”NetAuthSysAgent: ERROR: AFP_GetServerInfo - connect failed 64”
    Some years ago I stopped to use my external network hard disc. Then I updated to Mac OS X 10.6. I guess from that time on, always at startup I had following error pop-up window:
    “There was a problem connecting to the server “networkspace.local”. The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.”
    The console has this log lines:
    “NetAuthSysAgent: ERROR: AFP_GetServerInfo - connect failed 64”
    My file com.apple.AppleShareClient.plist look that way:
    What is wrong? How can I get rid of this error pop-up window.
    I moved now to Mavericks, but the same error occurs.
    Regards,
    M.

    Hi! I had the same problem. But I was faced with it just in a few days after first setup a new mac. And I needed to solve it .
    My problem was in mac firewall. One of my apps needed connection to my remote mac via afp. And it was added to firewall rules. Like a skype on this screeenshot (sorry for russian language, it is firewall settings window):
    I removed the app from this list and the problem was sold.

  • Sync encountered an error while connecting.Failed to connect to server.

    Cannot connect to server. "Sync encountered an error while connecting: Failed to connect to the server."
    Help!
    This happened yesterday 1/20 after my daughter was in her e-mail account. Had trouble with the screen also.

    I started having this problem after the download of the new Firefox 5.0. No solutions posted have worked so far. FIPS is already disabled.

  • C7 | Connection Failed - Access Denied - Invalid S...

    Hi,
    Whenever I am trying to connect to WLAN, it got connected but the moment I start browsing, it displays message 'Connection Failed - Access Denied'. Sometimes, it shows 'Invalid Server'. I am really not sure why it is happening as 3G is working fine in my phone. 
    If someone can help me to understand the problem and resolution to it.
    Thanks-
    Amit

    Hey Amitbbb, Welcome to the Nokia Forums!
    The apps SPB Wireless Monitor Lite and SPB Wireless Monitor may be preventing your phone from accessing the internet, if they have been downloaded to your phone before the Nokia Belle update. If possible, please uninstall these apps before updating to Nokia Belle. 
    If you are experiencing data connection problems after the Nokia Belle update, then please check if you had downloaded either of these apps earlier on your phone by browsing via your PC to Nokia Store: www.nokia.com/store  > My stuff.  If you can see either of these apps, then first try fix the problem by redownloading these apps on your phone:
    Connect your phone with a USB cable to PC and ensure that you have Nokia Suite running.
    In Nokia Store, select the name of these apps under My stuff and then select Download >Download on PC.
    After the apps have been redownloaded, please reboot your phone and verify that you are able to browse the internet on your phone for example by opening www.nokia.com in your phone’s browser.
    If you still get the same error message or if you not able to re-install these apps from Nokia Store for some reason, only then follow the remaining steps to manually disable these apps:
    Close Nokia Suite via File > Exit.
    Connect your phone to computer with a USB cable in mass storage mode. You can set this in the Notification bar via  USB > Mass storage on your device.
    Open Windows Explorer on your computer and open your phone’s mass memory drive (typically named Nokia Ovi Suite).
    Go to folder private\101f7989\esock\ and delete following file if it exists: ip.wrlmonsnf_20042D1F.esk.
    Close Windows Explorer, and unplug the USB cable after using the safely remove hardware and reject media function on PC.
    Reboot your phone.
    Verify that you are able to browse Internet on your phone.
    If you want to reinstall SPB Wireless monitor, go to Nokia store to redownload it.
    I hope this helps and that you manage to resolve your issue!
    Sheldrick
    Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

  • Error encountered while signing: The Windows Cryptographic Service Provider reported an error: Access was denied because of a security violation. Error Code: 2148532330

    Last night when i tried to sign a document i received the mesage below and after that it says this document can't be signed what can i do to fix this problem.
    Error encountered while signing:
    The Windows Cryptographic Service Provider reported an error:
    Access was denied because of a security violation.
    Error Code: 2148532330

    I assume you are implying "biztax" application here, right?
    I have contacted their program lead, with no result at all.
    Past days I have been searching for a solution - reinstalls / new systems - no solution.
    This issue appeared a week or two ago only.
    I found http://forums.adobe.com/message/5338853 useful - but no positive results either.
    http://test.eid.belgium.be/faq/faq_nl.htm obviously didnt help either.
    If anyone finds a solution to this issue, please do let me know - any help is appreciated.
    Biztax tells to use the "signature", not the "authentication"  - but it is only Auth. that is showing up as option to sign (that works)
    ps, did you fiddle with the Adobe Reader XI security settings and import that PKI etc as well? I hoped that would be the breaktrough. Sadly i'm still crying in my chair.
    Oh, and dont forget: they claim nobody else got this issue. Maybe one or two people. (We got about 8 customers experiencing exactly the same symptoms at the same time )
    >  I noticed that when I try to open the pdf  document that is 'signed' by the government it is not showing the filename in the title bar, but only " - Adobe Reader".    every piece of info helps I guess.
    Obviously last version of Reader   11.0.03

  • Please Help: Error! Connection failed to MaxDB (Linux)

    Hello,
    our current situation is, that we copied manually (after a system crash) all files under /sapdb from an old backup into the our (empty) Live system. Only the database files under sapdb/KRT/sapdata comes from the chrashed SAP system. These files are not lost.
    If we start the Sap System following messages appears:
    Checking ADA db Database
    ABAP Database is not available via R3trans
    Starting SAP-Collector Daemon
    09:04:34 27.04.2010   LOG: Effective User Id is root
    This is Saposcol Version COLL 20.95 700 - v2.12, AMD/Intel x86_64 with Linux, 2008/01/02
    Usage:  saposcol -l: Start OS Collector
            saposcol -k: Stop  OS Collector
            saposcol -d: OS Collector Dialog Mode
            saposcol -s: OS Collector Status
    The OS Collector (PID 5469) is already running .....
    saposcol already running
    Running /usr/sap/EC6/SYS/exe/run/startdb
    Trying to start database ...
    Log file: /home/ec6adm/startdb.log
    Database start failed
    DB startup failed
    Our system administrator is ill and i'm not a system administrator.
    Could you help me ?
    Thank's lot
    Franz

    Some additional informations:
    /home/ec6adm/startdb.log:
    Di Apr 27 09:04:34 CEST 2010
    LOGFILE FOR STARTING DATABASE
    Trying to start database ...
    Di Apr 27 09:04:34 CEST 2010
    Checking required environment variables
    SAPSYSTEMNAME is >EC6<
    Start database with xuserkey >c<
    Di Apr 27 09:04:34 CEST 2010
    Connect to the database to check the database state
    dbmcli: connect check finished with return code: 0
    Database not available
    Di Apr 27 09:04:34 CEST 2010
    Starting XServer
        12916  XSERVER  Found other running x_server with version 'X64/LIX86 7.6.03   Build 009-123-163-622'
        12902  XSERVER  started, 'already...'
    Di Apr 27 09:04:34 CEST 2010
    Starting database
    Starting Database Instance...
    Error! Connection failed to node kurt for database KRT:
    database not found                    
    Opening Database...
    Error! Connection failed to node kurt for database KRT:
    database not found                    
    Di Apr 27 09:04:34 CEST 2010
    Connect to the database to verify the database is now open
    dbmcli check finished with return code: 0
    Database start failed

  • "Sync encountered an error while connecting: Failed to connect to the server. Please try again."

    "Sync encountered an error while connecting: Failed to connect to the server. Please try again." message has appeared on both my desktop (OS 10.6.8, FF 6.0.2) and laptop (same).
    This error is not covered in your help documentation.
    I have an active internet connection.
    I have tried resetting the Sync on the laptop several times over the last few weeks.
    Please advise.
    Thanks

    Hi!
    It seems that you are not using the latest version of Firefox. Please, update and try again: http://www.mozilla.org/firefox

  • I keep getting this message "Sync encountered an error while connecting: Failed to connect to the server. Please try again" What's the problem in English

    I keep getting this message "Sync encountered an error while connecting: Failed to connect to the server. Please try again" What's the problem in English

    Hi,
    Sometimes the server is not available and you can get an error like this one. Usually it works if you try to sync later. If this doesn't work, take a look to [https://philikon.wordpress.com/2011/06/13/how-to-file-a-good-sync-bug/ this post] to learn how to report a bug.
    Let me know if this is helpful.

  • Cisco Show and Share Error: NetConnection.Connect.Failed

    Hi
    I installed Cisco DMM 5.2.0.25 and also CVP. I can able to view videos from the browser of certain PCs . But if i open the same link from another Laptop or PC( which are in same network and domain), I cant able to view the video. It shows an error "NetConnection.Connect.Failed". Am opening through Mozilla Firefox.
    Prasanth Abraham

    Hi Prasanth,
    This looks to be an error of the flash plugin. Could you check if affected PCs have a supported version of Flash or of the Browser, as documented at:
    http://www.cisco.com/en/US/prod/collateral/video/ps9339/ps6681/data_sheet_c78-565776_ps6682_Products_Data_Sheet.html
    Mozilla Firefox 3.5.3 / 3.6.3
    Adobe Flash v.10 recommended
    Regards,
    Marco

  • "Access was denied" trying to refresh Excel Services report data

    Project Server 2010
    In an Excel Services report, using a sample ODC file I've changed only trivially, during Data / Refresh All Connections:
    Access was denied by the external data source. The following connections failed to refresh:
    The short...
    I've narrowed it down to the Data Refresh attempting to login with the
    User ID of the connection string in the ODC file instead of the
    credentials of the TargetApplication specified as the SSS ID.  SQL
    Server logs confirm this.
    Why does Excel Services refuse to use the TargetApplication
    credentials and continuously attempt to use the User ID in the
    connection string (but only for ODC's that have been slightly modified - see below)?
    The long...
    Excel Services, Secure Store, the Target
    Application:"ProjectServerApplication", Trusted File Locations, Trusted
    Data  Connection Libraries, a db_datareader Database user, and
    Credentials for the Target Application have all been setup
    and configured.
    Accessing the Sample report "SimpleProjectsList" is successful. 
    Adding a project, then "Data / Refresh All Connections" works and shows
    the new project.
    To verify; changed the credentials on the TargetApplication
    "ProjectServerApplication" to something invalid, iisreset, Data /
    Refresh All Connections, correctly failed.
    Set credentials correct and everything works fine again.
    So that report is definitely using the TargetApplication, and the TargetApplication is definitely set with proper credentials.
    Now the issue:
    Creating any ODC file from scratch causes "Access was denied..".  Exporting the SimpleProjectsList ODC, making no changes,
    uploading it, creating a report based on it - Access was denied. 
    Editing the SimpleProjectsList
    Excel file and removing a single space in the SQL to cause the ODC to
    get detached.  Save As different report, open new report, refresh data -
    Access was denied.
    When looking at the SQL logs, with each "Access was denied" was a "Login failed for user 'joeblow'. ..."
    'joeblow' is the SQL Server user configured in the data connection string for User ID that is for use directly in Excel - NOT the TargetApplication.
    I can reproduce the exact same scenario using an unattended service account.
    Why does Excel Services refuse to use the TargetApplication credentials?
    Thanks-
    Mike

    Hi Mike,
    I think this issue shouldn't be related to SharePoint running in Azure, could you please check the SharePoint ULS log (may enable Verbose level log) if there are more detailed errors for helping to solve this issue?
    Meanwhile please also check if the data connection file is setup correctly per the following article.
    http://whitepages.unlimitedviz.com/2010/12/connecting-to-cubes-and-external-data-with-excel-in-sharepoint/
    Thanks,
    Daniel Yang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support contact [email protected] 
    Daniel Yang
    TechNet Community Support

Maybe you are looking for

  • Questions on FP1, FP2, Belle Refresh and availabil...

    Hello, First things first: Note that my post is not intended to ask when Belle Refresh will be available for my phone. I have been reading a lot about this topic, on this and many other forums, and know by now that I need to be patient and wait for B

  • Javascript Error in InputField Date Type

    Hi, We have migrated the Enterprise Portal Application EP5SP6 to NW2004s SP6.Everything works fine except one issue in a Manager Reports, Where we are using Date type InputField. Code used: <hbj:inputField id="otherdate1" type="DATE" showHelp="TRUE"

  • MDM 7.1 Transport Management using CTS+

    CE: 7.2 MDM: 7.1 PI: 7.1 EHP1 ERP: 6 EHP4 Hi, For central master data management, we are building a solution based on the components mentioned above. Our current landscape for ERP has 10 systems due to the requirements of the project. This includes S

  • Unit tests: more than one startup (teardown) process

    Whether I can create more than one startup (teardown) process? Mike

  • Errors using SQ01 SQ02 and SQ03

    Hi ... I have an ECC 6.0 system with NW 7.0 ... our functionals people have to use the SQ01 SQ02 and SQ03 transactions to create an user groups for querys managment ... but in our production system I received the message "Changes to Repository or cro