Mifi 2200 Update Incomplete ... Need Help!

The connection is quite poor where I live. I had the Mifi conntected to my desktop via usb cable when i agreed to do an update...think it was for wifi. Well it didn't completely load the update and now I can no longer get online. I did try removing hardware but when I plug it in it still asks me for a Novatel Wireless Installation CD.
Please Help

Similar Messages

I have an iphone 3 and when i click software update it says cannot contact iphone software update i need help so i can get apps

plz help, i need to update my iphone and it wont let me HELP!!!!!
i also try to sync music to it and when i do it freezes the computer and the rainbow spiral thingy shows up

I don't care how old it is! I have a 5 year old dell laptop and a brand new dell laptop but I still get the same updates for both from windows! I don't do contract phones, Its the biggest money sham in the market. So, that being said im not spending my hard earned money on a new phone when I have a perfectly good one now! Apple just needs to appreciate all of there customers not just the ones that have their newest phones. Period.

I am trying to update my MAC to get iCloud on it, prior to the ios7 update. Need help figuring this out!

I am trying to update my MAC to get iCloud on it, prior to the ios7 update. I do have a pc as well, so i can sync it there if needed. any help or suggestions are much appreciated!

beachblondie wrote:
... I am just afraid of losing everything ...
How to BackUp > http://support.apple.com/kb/ht1766
What gets Backed Up
iTunes http://support.apple.com/kb/ht4946
iCloud http://support.apple.com/kb/PH2584

Updating Quicksilver: Need Help Starting Project

Hello fellows. Awhile ago I was able to purchase a used PowerPC G4 Quicksilver model from my former University for a very wonderful price of $40.
I've finally got around to wanting to updating it. I currently have an iMac which is less than a year old, but I've always wanted to update the old Quicksilver. So, I guess I need to know where to start and just what I can do for a few hundred dollars.
Here are the basic specs:
*Machine Name:* Power Mac G4
*Machine Model:* PowerMac3.5
*CPU Type:* PowerPC G4 (2.1)
*Number Of CPUs:* 1
*CPU Speed:* 733 MHz
*L2 Cache (per CPU):* 256 KB
Memory: 768 MB
*Bus Speed:* 133 MHz
*Boot ROM Version:* 4.2.5f1
Things I know I can easily do are install a bit more RAM. Anywhere know where I could buy some that would work?
My friend said he could help me install a new CD/DVD drive that would allow me to read and burn DVD's. So, that shouldn't be too much of an issue. Any rec's on what to purchase?
Lastly, is there anyway possible that the processor could be upgraded? Intel? Is that even possible?
I appreciate any help that can be offered. Thank you!
Message was edited by: nick.burroughs

This processor interests me because it's definitely an upgrade from what I have now and is only $200.
http://eshop.macsales.com/item/Other%20World%20Computing/MEG42M1200/
It says it's Leopard compatible; would that be as easy as installing this and having more HDD space?
Thoughts on these two processors?
http://eshop.macsales.com/item/Newer%20Technology/MAXG47S1600/
http://eshop.macsales.com/item/Sonnet%20Technology/SG41600/
As for a HDD, I'm guessing the best thing to do would just be to install a second internal. Any suggestions? I don't think I'd go for anything more than 500 GB, and it would be where everything is stored, where the current would be the OS. Which currently, is OS X Tiger.
Message was edited by: nick.burroughs

Microsoft Office - Constant Update Problem | NEED HELP

Okay, so here is my problem -
The website i have needs to be updated regulary by many different people and i know contribute can solve this.
as the people who are updating this have no Web Experience, i thought using the Office Plug-in would help.
Can each person be assigned a Microsoft Word Document and whenever they type new content and click publish, will the website automatically update with this new content ? or does it have to be re added into contribute every time ?

You can use the Office plugins to publish the office Documents directly to your website. When you have an earlier version of the same file in the website, Contribute pops up a dialog saying to Replace the existing version or create a new file with _00 at the end of the file name.

UPDATE TABLE NEED HELP

hi to all
This is my table
SCOTT>select * from print;
X Y
1 8
2
3
4 5
5
6
7
8 3
9
10
10 rows selected.
THEN UPDATE PRINT TABLE LIKE THIS
X Y
1 8
2 8
3 8
4 5
5 5
6 5
7 5
8 3
9 3
10 3
FOR THAT I NEED QUERY
PLS HELP ME
THANKS&REGARDS
NATARAJ KESANA

Hi,
you can do the following:
UPDATE PRINT p1
   SET y = (SELECT y
            FROM   PRINT p3
            WHERE p3.x = (SELECT MAX(x)
                        FROM   PRINT p2
                        WHERE p2.x < p1.x
                        AND    p2.y IS NOT NULL))
WHERE y IS NULL
select * from print
X     Y
1     8
2     8
3     8
4     5
5     5
6     5
7     5
8     3
9     3
10     3

SharePoint Foundation 2013 - March 2014 Update Issue - Need help

We've just applied the SharePoint Foundation 2013 March 2014 Update, it always requires that we run the SharePoint Products Configuration Wizard at the end of install, but this time it's getting stuck at step 9 of 10 (the profile sync service cannot be
started even as admin). Is anyone else having any issues with this update? Has anyone else applied it yet? Is anyone else planning to apply it?
If anyone can help with advice on this I'd appreciate it.

Hi,
We can still access CA but sync will not start. Tried rebooting after the failed configuration and tried to run it again but it didn't work.
4/2014 10:45:16 5 ERR            Exception: System.ServiceModel.EndpointNotFoundException: There was no endpoint listening at http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc
that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException:
No connection could be made because the target machine actively refused it 127.0.0.1:32843
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
   at System.Net.HttpWebRequest.GetRequestStream()
   at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
   at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
   at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustContract.Issue(Message message)
   at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)
   at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst)
   at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties)
   at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForLegacyLoginContext(Uri context)
   at Microsoft.SharePoint.SPSite.InitUserToken(SPRequest request)
   at Microsoft.SharePoint.SPSite.SPSiteConstructor(SPFarm farm, Guid applicationId, Guid contentDatabaseId, Guid siteId, Guid siteSubscriptionId, SPUrlZone zone, Uri requestUri, String serverRelativeUrl, Boolean hostHeaderIsSiteName, SPUserToken
userToken, Boolean appWebRequest, String appHostHeaderRedirectDomain, String appSiteDomainPrefix, String subscriptionName, String appSiteDomainId, Uri primaryUri)
   at Microsoft.SharePoint.SPSite..ctor(Guid id, SPFarm farm, SPUrlZone zone, SPUserToken userToken)
   at Microsoft.Office.Project.Server.Upgrade.FullFarmDependentProjectDatabaseSequence.SPSiteExists(Guid siteId)
   at Microsoft.Office.Project.Server.Upgrade.ProjectDatabaseSequence.AddNextLevelObjects()
   at Microsoft.SharePoint.Upgrade.SPHierarchyManager.Grow(SPTree`1 root, Boolean bRecursing, SPDelegateManager delegateManager)
   at Microsoft.SharePoint.Upgrade.SPHierarchyManager.Grow(SPTree`1 root, SPDelegateManager delegateManager)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Administration.SPDatabase.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveUpgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveUpgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
   at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
4/2014 10:45:16 5 ERR            An exception of type System.ServiceModel.EndpointNotFoundException was thrown. Additional exception information: There was no endpoint listening at
http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.
System.ServiceModel.EndpointNotFoundException: There was no endpoint listening at //localhost:32843/SecurityTokenServiceApplication/securitytoken. that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException,
if present, for more details. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:32843
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
   at System.Net.HttpWebRequest.GetRequestStream()
   at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.HttpOutput.WebRequestHttpOutput.GetOutputStream()
   at System.ServiceModel.Channels.HttpOutput.Send(TimeSpan timeout)
   at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.SendRequest(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustContract.Issue(Message message)
   at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)
   at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst)
   at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties)
   at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForLegacyLoginContext(Uri context)
   at Microsoft.SharePoint.SPSite.InitUserToken(SPRequest request)
   at Microsoft.SharePoint.SPSite.SPSiteConstructor(SPFarm farm, Guid applicationId, Guid contentDatabaseId, Guid siteId, Guid siteSubscriptionId, SPUrlZone zone, Uri requestUri, String serverRelativeUrl, Boolean hostHeaderIsSiteName, SPUserToken
userToken, Boolean appWebRequest, String appHostHeaderRedirectDomain, String appSiteDomainPrefix, String subscriptionName, String appSiteDomainId, Uri primaryUri)
   at Microsoft.SharePoint.SPSite..ctor(Guid id, SPFarm farm, SPUrlZone zone, SPUserToken userToken)
   at Microsoft.Office.Project.Server.Upgrade.FullFarmDependentProjectDatabaseSequence.SPSiteExists(Guid siteId)
   at Microsoft.Office.Project.Server.Upgrade.ProjectDatabaseSequence.AddNextLevelObjects()
   at Microsoft.SharePoint.Upgrade.SPHierarchyManager.Grow(SPTree`1 root, Boolean bRecursing, SPDelegateManager delegateManager)
   at Microsoft.SharePoint.Upgrade.SPHierarchyManager.Grow(SPTree`1 root, SPDelegateManager delegateManager)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Administration.SPDatabase.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveUpgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Administration.SPPersistedUpgradableObject.Upgrade(Boolean recursively)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.ReflexiveUpgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object o, Boolean bRecurse)
   at Microsoft.SharePoint.PostSetupConfiguration.UpgradeTask.Run()
   at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
4/2014 10:45:16 1 ERR          One or more configuration tasks has failed or some tasks were not run
4/2014 10:45:16 1 INF          Leaving function TaskDriver.OnTaskDriverStopping
04/14/2014 10:45:16 1 INF        Leaving function TaskDriver.ExecuteTasks
04/14/2014 10:45:16 1 ERR        One or more configuration tasks has failed to execute
4/2014 10:45:16 1 ERR          Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review
the extended error information located at D:\Logs\PSCDiagnostics_4_14_2014_10_44_8_154_1605984328.log, fix the problem, and run this configuration wizard again.
04/14/2014 10:45:16 1 INF          Entering function StringResourceManager.GetResourceString
4/2014 10:45:16 1 INF      Leaving function TaskDriver.Run
04/14/2014 10:45:16 1 ERR      Post setup configuration was not run successfully when using the command line task driver module
04/14/2014 10:45:16 1 INF    Leaving function PsconfigCommandLineMain.Main
This is the meaty part of the errors we are getting. Right now our entire site is down. If you know of anything to remedy these errors let me know.

Mac is extremely slow after yosemite update, really need help. (Etrecheck inside).

After recently installing yosemite my mac been painfully unresponsive and slow. I cannot boot up in normal mode, i'm currently in safe mode.
What I have tried so far and what I know:
Initially thought filevault was the issue, I disabled encryption and now it says "decryption is paused" and hasn't resumed in days. Potentially is the issue.
I run a hardware diagnostic test using the hardware check within the macbook pro (booting up holding D) and the mac didn't identify any hardware issues.
I reinstalled yosemite (not a clean install) and the issue was not resolved.
I have completed a backup of my mac so all my data is secure.
Any help would be great, even just telling me how to turn on filevault will be helpful.
My etrecheck:
EtreCheck version: 2.0.11 (98)
Report generated 23 November 2014 20:15:11 GMT
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:11:9
Disk Information: ℹ️
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 498.88 GB (268.58 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Samsung M3 Portable Samsung M3 Portable 500.11 GB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
Backups (disk2s2) /Volumes/Backups : 494.35 GB (264.39 GB free)
Recovery HD (disk2s3) <not mounted> [Recovery]: 650 MB
GeneralUse (disk2s4) /Volumes/GeneralUse : 4.63 GB (4.60 GB free)
MOSART Semi. 2.4G Keyboard Mouse
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[not loaded] com.caiaq.driver.NIUSBTraktorKontrolS4Driver (2.6.0 - SDK 10.8) Support
/System/Library/Extensions
[not loaded] com.mice.driver.Wireless360Controller (1.0.0d12 - SDK 10.8) Support
[not loaded] com.mice.driver.WirelessGamingReceiver (1.0.0d12 - SDK 10.8) Support
[not loaded] com.mice.driver.Xbox360Controller (1.0.0d12 - SDK 10.8) Support
Startup Items: ℹ️
DoubleCommand: Path: /Library/StartupItems/DoubleCommand
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[invalid?] org.thebends.iphonedisk.mobile_fs_util.plist Support
Problem System Launch Daemons: ℹ️
[failed] com.apple.watchdogd.plist
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.mcafee.menulet.plist Support
[not loaded] com.mcafee.reporter.plist Support
[not loaded] com.oracle.java.Java-Updater.plist Support
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
[not loaded] org.pqrs.KeyRemap4MacBook.server.plist Support
Launch Daemons: ℹ️
[not loaded] com.adobe.fpsaud.plist Support
[not loaded] com.bombich.ccchelper.plist Support
[not loaded] com.DesignScience.DSMTTool.plist Support
[not loaded] com.ea.origin.ESHelper.plist Support
[invalid?] com.mcafee.ssm.Eupdate.plist Support
[invalid?] com.mcafee.ssm.ScanFactory.plist Support
[invalid?] com.mcafee.ssm.ScanManager.plist Support
[not loaded] com.mcafee.virusscan.fmpd.plist Support
[not loaded] com.mice.360Daemon.plist Support
[not loaded] com.microsoft.office.licensing.helper.plist Support
[not loaded] com.oracle.java.Helper-Tool.plist Support
[not loaded] com.oracle.java.JavaUpdateHelper.plist Support
[not loaded] com.teamviewer.Helper.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
User Launch Agents: ℹ️
[not loaded] com.adobe.ARM.[...].plist Support
[not loaded] com.google.keystone.agent.plist Support
[not loaded] com.spotify.webhelper.plist Support
[not loaded] com.valvesoftware.steamclean.plist Support
User Login Items: ℹ️
FilesWarwick Application (/Users/[redacted]/Downloads/FilesWarwick.app)
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Flux Application (/Users/[redacted]/Applications/Flux.app)
uHD-Agent UNKNOWN (missing value)
uTorrent UNKNOWNHidden (missing value)
Google Chrome UNKNOWN (missing value)
wine Unix Executable File (/Applications/Wine.app/Contents/Resources/bin/wine)
proXPN Application (/Applications/proXPN.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Unity Web Player: Version: UnityPlayer version 4.5.1f3 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
DirectorShockwave: Version: 12.0.4r144 - SDK 10.6 Support
User Internet Plug-ins: ℹ️
BlueStacks Install Detector: Version: Unknown
Safari Extensions: ℹ️
LinkThing
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
MacFUSE Support
Native Instruments USB Audio Support
XBox 360 Controllers Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 230.30 GB
Destinations:
Backups [Local]
Total size: 495.00 GB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 495.00 GB < (Disk used 230.30 GB X 3)
Top Processes by CPU: ℹ️
      86% corestoraged
      45% WindowServer
      34% Google Chrome
      10% com.apple.preference.security.remoteservice
      9% xpccachectl
Top Processes by Memory: ℹ️
177 MB xpccachectl
170 MB Google Chrome
137 MB Microsoft PowerPoint
87 MB WindowServer
82 MB spindump
Virtual Memory Information: ℹ️
26 MB Free RAM
1.45 GB Active RAM
1.44 GB Inactive RAM
674 MB Wired RAM
3.07 GB Page-ins
167 MB Page-outs

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Error while updating account: need help with error msg

Hi all,
when I try to change the AccountOwner of an Account via Web Service I sometimes get the following error:
<faultstring>Method 'WriteRecord' of business component 'Account' (integration component 'Account') for record with search specification '[External System Id] = "27446"' returned the following error:"The selected record has already been added to the list. Please add another record or close the pop-up list and continue.(SBL-DAT-00357)"(SBL-EAI-04375)</faultstring>
Can anyone please help me to interprete this fault?
Thanks
Michael

Looks like you are creating an Account Team member who already exists in the account team vs just updating the Account owner

10.9.5 update issues -- need help with sync to LG phone

1. Can't sync contacts from imac to Gmail. End goal is to sync contacts to LG phone
2. Notes missing after update
3. Not all calendar entries show up on LG phone

While 2 GB is the absolute minimum to install Mavericks, if you want to do anything with the Mac you need more then that. Upgrade your RAM.
Until you upgrade the RAM seriously consider shutting down the Mac nightly. You should also seriously review the items in the User Login Items to see if there are any there that you really don't need to have startup with your login to reduce the amount of RAM you are using.

Drivers update..need help

i have windows 7 on my pc and am using VGA drivers i cant update to intel..please help i cant download bleustack to use whatsapp...please help

Hi aby11,
"am using VGA drivers i cant update to intel"
What does this mean ? The graphic device is not listed in the device manager or you have no idea of how to update the graphic driver ?
Usually we can update the driver from the Device Manager .
Control Panel \All Control Panel Items\Device Manager \Display adapters\Right click the driver and choose update
We can uninstall it and restart the machine ,it will be installed automatically .
We also can choose to download the driver from the manufacturer website and maunally install it by choosing "Browse my computer for driver software" if we know the graphic model(Run "dxdiag.exe" and choose display).
Best regards

What to do now about update? Need help!

I had this problem on my iMac, where the Airport automatically disconnected from the internet (Beacon lost thing). Now I installed my Leopard again and I have the software Version 10.5
My internet works great now but I don't know what to do about the update. I have 4 options:
Airport-Serviceprogram 5.3.2 , Remote Desktop Client, Quicktime, Itunes, Combo-Update to 10.5.5
But I am afraid of updating to 10.5.5. I would do that but I don't have any option about airport updates that go with that to uncheck. Or do I just have to uncheck the first thing and am going to be fine with installing the 10.5.5 update?

BigWaveSurfer wrote:
I just need a way to update my computer to 10.5.5, but leaving all airport related updates out, so my Aiport won't have the same problems again.
Do you know now what I mean?
Yes, I doubt your issue was with 10.5.5 as my Airport and most others work well in 10.5.5. The Combo Update is the safest way to assure that your system is trouble-free. While I understand your reticence, it's best to get it ironed out. That said, you should always have a backup. Make a SuperDuper clone or, CarbonCopy Cloner clone before you begin. Then if anything untoward happens, you have the clone to restore.
-mj

Itunes is not working since update. Need help.

My iTunes cannot be opened after I updated the iTunes version. Did anybody else experience this? How can I get iTunes up and running. I hope I don't lose my songs..Appreciate any help...

Updating to 10.7.0.21 using an iTunesSetup.exe or iTunes64Setup.exe shouldn't touch your content. By way of an example, I've updated to 10.7.0.21 on two different computers using the downloaded installer files (using an iTunes64Setup.exe on the 64-bit system and an iTunesSetup.exe on the 32-bit system) and didn't lose anything.
(That being said, it's still always a good idea to maintain a current backup at all times, in case of disasters of any sort.)

MiFi Novatel + iPad = I NEED HELP PLZZZZZ

Hu guys, i have an ipad, works on the net throuth the wifi just fine, BUT when i connect through my MiFi (novatel) it disconnects like every 5 mins, sometimes after 10 , sometimes it asks for a password and when i type it it doesnt connect, i have to disable the whole ipad wireless and turn it on to get connected again! Its really annoying! Is their a specific setting must be done to stop the disconnection ? Im really confused, im also with a contract with the telecommunication company to pay monthly for a whole year for this mifi ! Help me, how can i stop it from disconnecting if theres a specific settig for the ipad to stop disconnecting !

I have a MiFi and it works great. The few times I've had problems like the one you're describing, I traced it to being in areas with poor signal strength. I suggest you download one of the apps that find wifi hotspots (I use WifiTrak), for example, since they show you signal strength, and see what your Mifi's signal strength is. The higher the number, the weaker the signal strength.

Iphone 3g no longer syncs with itunes after 3.1 update.. need help

after updating to 3.1, my phone went into restore mode.. after it finished I noticed that the device would show up in tunes under devices but will no longer sync. It will start to verify then stops and goes back to my home screen

Same problem here. It shows up under devices but there is no "page" for it. No tabs, music, apps, nothing.

Mifi 2200 Update Incomplete ... Need Help!

Similar Messages

Maybe you are looking for