Mifi 4620L - how do I determine which devices are using my data?

I Have a couple kids connecting to our Mifi4620 and we keep going over our 20gb data limitation. How can I find out what devices are using data and when as we. As how much so I can track down my high data usage culprit?

I have made several comments on another forum about my high data usage. The forum name is "HIGH DATA USUAGE being used". One thing I have found effective in my trouble shooting is to make sure all devices are off and will not auto connect to the WiFi.
1. Turn on the WiFi and make a log of everything that you do and with a time.
2. turn on only one device and do what ever you want to use that device for. (ALL other devices off}
3. Wait about 5 minutes when finished and then turn the MiFi off.
4. Wait 5 to 10 minutes before turning the MiFi back on to make sure all data got registered.
5. Do these steps for each device and keep a log of sites visited and what was done on each device.
6. Log into your Verizon account and go to data then down nearer the bottom there is a box where you can select a device. Select the router phone number and it will give you a detailed listing of data usage and times. The time in the listing is the time the session started and will add all data used until the MiFi session is ended. If nothing is connected it will check about about every 160 minutes ( 2 hrs. 45 minutes) you will see a small data usage. If something is connected you will see data usage every totaled every 6 hours (approximately). By turning the MiFi off you can stop the 6 hour totaling and only total the session up to that time. Of course you have to wait long enough for their computers to get the total data usage. At one time I would have to wait 3 to 4 days for some of these to show up but recently it shows up within a couple of hours and has always been updated over night. I have been downloading the detail usage since every morning since August. I made an excel spread sheet that will total on a daily basis the total data used for a day when I do a copy of my download and paste it into my spreadsheet.
I hope this helps although you might want to read the other forum, You are not alone with a problem. I hope you can solve your problem and if you would not mind posting a reply to me as to what you find if you can solve your problem. I thought my problem was solved but it is back and I have run out of ideas as to what else I can check or change. Today I went to Sprint store and can switch to one of their plans and save $18.00 per month but the problem with that is that the Sprint connection is not quite as good where I live.

Similar Messages

How can i determine which devices are used at the moment?

Hi all,
I am designing an interface with LabVIEW for uing agilent devices. My work colleagues will use this interface. I want to determine which devices are used at the moment and if I determine used device, i will add automatically device names to interface's main vi. So all my work colleagues can see on the program which devices are used by another colleague. This devices are connected with GPIB. İ want to learn is there any function on Instrument I/O palette.
Thanks,
Omer
Solved!
Go to Solution.

Hi Omer,
so those devices are connected to the PC with a GPIB connection. Will your collegues run several DAQ programs at the same time?
GPIB-devices being controlled by PC don't have a "in use"-signal. They wait for commands, execute them and send an answer. When you start to control them using two programs they may respond to both programs, mixing up settings/measurement values and so on.
That being said: In MAX you can see all devices connected to your GPIB port. You could scan the GPIB port using VISA commands in your program. You might even try to access a certain device by it's VISA alias. I really don't know if you will get a "device nopt available" error message when that VISA alias is in use by a different program - but you might do a quick test on your own…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How can I determine which apps are using excessive data on a Samsung Galaxy?

We have been going over our data plan for the last couple of months.

settings > data usage, then you can scroll through the list of apps that are using data
Also ensure that apps are set to either not update automatically or to update only over wi-fi (through your Google Play app settings).

How can you determine which pages are using a specific symbol?

I want to find all the pages that are using a specific symbol, but I don't know how. I can't simply switch symbols because some have specific text & want to switch them with more generic smart buttons. I'll have to find every instance to update the text.
thanks!

me too, my file has 39 pages with many unuse symbols, now I want to delete those unuse.
I found that after deleteing those unuse in Page 1, actually they are being used in other page,
I can't find the way to delete them all at one time for all pages.
and I am using CS3

I have about 5,000 images in a Folder. How can I determine which images are NOT in a Collection?

I have about 5,000 images in a Folder. How can I determine which images are NOT in a Collection?

Create a smart collection with criteria "collection" and "does not contain"; and also with criterion Folder contains (or folder contains all)
That works if you are thinking about a specific named collection.
If you are interested in finding photos that are not in ANY collection, the usual trick is "collection" "does not contain" "a e i o u y"

How can I determine which jobs are running on NT?

Hello,
How do I determine which processes are in execution on an NT box from a JAVA
application? I figure it must involve runtime exec'ing some run32dll
program, but which one?
TIA

Search microsoft.com, or MSDN. That isn't anything to do with Java Programming.

How can i see which devices are connected to my wireless network?

how can i see which devices are connected to my wireless network?

Login to your router and view the DHCP clients.

How can I find which applications are using the most power?

I have recently noticed a full charge of power doesn't last as long as it used to on my iPad 2. Is there some way to determine which applications are using the most power?
I have been monitoring my home network router accesses and have noticed the iPad logs accesses every 15 seconds. This only happened recently. It had been well behaved and only accessing once or twice a day before. I installed the most recent iTunes upgrade, per suggestions during a Sync. The problems seemed to occur after this update. I have gone through all the settings and have minimized the applications requiring higher power (I switch off the location services unless I'm away from home. Likewise, I turn off my cellular carrier unless I'm away from home, etc.)
In short, how can I maximize my power usage (aside from turning it off)?
Thanks.
Dave

Thanks for responding so quickly.
I'm really trying to find out why the battery is depleting much faster than it used to all of a sudden. I used to be able to put a full charge on it and it would last about 5 to 6 days with normal use (normal for me). Now that battery only lasts about 2 to 3 days with the same use.
I DO recharge it when it needs to be charged but this is indicating there is something else (new) that is causing the power drain.

How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?

Hi there,
How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?
Thanks.

You need to enable auditing on SharePoint server and it will let you know, if someone makes any critical changes for the same.
Please walk through this informative KB to enable auditing on SharePoint :https://support.office.com/en-za/article/Configure-audit-settings-for-a-site-collection-f5a346d0-ee0f-4412-a5e6-d9b5abaa1012
Here is one more resource :
https://support.office.com/en-in/article/View-audit-log-reports-4293e8d5-4e7d-4201-b8ac-c8e63a100131
Moreover, if you wish to audit such critical changes automatically, you may consider on this comprehensive application (http://www.sharepointauditing.com/) that helps to track every changes on SharePoint into
real time and provides the captured data at granular level.

How to determine which processes are using a module?

I want to find out which processes are using a kernel module.
However this info is shown neither with ``lsmod'' nor in
/sys/modules/<mod_name>/.
It's needed to reload certain modules which are acting buggy,
in a bash script. Right now I just keep a list of processes which
use the module and try to kill'em all, not exactly a beautiful
solution.
To work around it I compiled a kernel with
``CONFIG_MODULE_FORCE_UNLOAD=y'', however actually
trying to unload anything with this results in an unstable system.
Suggestions?

After successfully syncing the configuration database I ran the configuration compliance job once more, however with the same (misleading) results. Cross-checking the configuration reveals that none of the devices marked as compliant are actually having the "ip helper-address" configured.
Maybe it is something wrong with the input data I specified for the compliance template (ref step 1-6 in my first post)?
Or maybe the Compliance Jobs arent the best ways to determine whether or not my devices are having the "ip helper-address" configuration defined?

HT1918 how do you determine what devices are set up under homesharing

Does anyone know how you determine what devices are set up under homesharing? I am not finding a list of devices under my account.

Welcome to the Apple Community.
There are no lists, you'll need to check each device.

How to find out which lists are using email enabled feature in my SP 2010? Any script? Anything else?

Hi there,
How to find out which lists are email enabled in my SP 2010?
Any script? Anything else?
Thank you.

Hi frob,
check this script that is stated on this link
$SPwebApp = Get-SPWebApplication "http://migration.Company.com"
<# If it is MOSS 2007, You can use:
$SPWebApp = [Microsoft.SharePoint.Administration.SPWebApplication]::Lookup(http://sharepoint.com)
To get SPWebApplication Object
#>
#create a CSV file
"E-Mail,List,Site" > "EMail-Enabled.txt" #Write the Headers in to a text file
foreach ($SPsite in $SPwebApp.Sites) # get the collection of site collections
foreach($SPweb in $SPsite.AllWebs) # get the collection of sub sites
foreach ($SPList list in $SPweb.Lists)
if ( ($splist.CanReceiveEmail) -and ($SPlist.EmailAlias) )
# WRITE-HOST "E-Mail -" $SPList.EmailAlias "is configured for the list "$SPlist.Title "in "$SPweb.Url
$SPList.EmailAlias + "," + $SPlist.Title +"," + $SPweb.Url >> EMail-Enabled.txt #append the data
http://www.sharepointdiary.com/2011/06/find-all-incoming-email-enabled-lists.html
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation. Please remember to mark the reply as answer if it helps.

How to find out which BADIs are used

Hi Experts,
Is there any tcode where I can give the transaction or program name and find out which BADIs are used in that transaction.
thanks
sankar

Dear Sankar,
You can first check available BAdis and then go to SE19 to see what all have been implemented.
Please check this sample program from other thread to find BADI and enhancement for a given transaction code. You just need to create a custom program in your system by cut and paste below codes.
REPORT ZTEST.
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Alternatively, you can do the following:
1. For what ever transaction u want the enhancement .. just check for the System-->status (menu) and find out the PROGRAM name....
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for "Call Customer-function " ... and u'll get some search results .. If u get results then u have enhancement in that tcode .....
4. Then it actually calls a Function module .... copy the Function module name .... go to SE80 (object navigator) click on "Repository Information system" then Customer Enhancements .... Give the Function module name in the "Components" field and click Execute ....
ull get a list of Enhancements related to that Componene....
5. Choose which ever enhancement will suit ur business need ..
6. Go to CMOD... create a project .... assign ur enhancement ... and then code ur logic.... activate ur enhancement in CMOD ....... Ur Buisness need will be solved...
For a user exit......
Finding whether there is any User Exit or not for tcode VA42
1. For what ever transaction u want the user exit .. just check for the System-->status (menu) and find out the PROGRAM name.... ( The program name would be for our scenario "SAPMV45A" )
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for the word "USEREXIT" .... u ll find all the user exits in the search result .. and find ur's then ...
Hope this will help.
Regards,
Naveen.

How can I determine which browser is used(Microsoft IE or Netscape)

As you probely know: Netscape doesn't support the same functionality as IE.
To gain the maxium functionality from IE without solving problems in Netscape, the customer has decided to work with two different stylesheets(one for IE and one for Netscape).
Now my question is, how can I determine in Portal in which browser(IE or Netscape) it is running.
Thanks
arny
Therefor we are using two differen

The browser ID string is a HTTP request parameter. How you get to it depends entirely on what you're programming in. You want to get the value of the User-Agent parameter (for example, in CGI, this is HTTP_USER_AGENT).
However, I'd advise against doing things this way unless you really understand how HTTP works on many levels. One common problem people run into on sending different content based on the browser is that proxy servers will happily cache everything and send content intended for one browser to another.
I have not seen any IE functionality that Netscape does not also have that is worth this hassle, but that's just my very stubborn opinion. :-)

How do i see which devices are connected to my airport router

How do I see which wi fi devices are hooked up to my router? Also, my Verizon Network Extender is not working with my new airport express router? How do I get it to work? My system and GPS lights are red on the extender.

How do I see which wi fi devices are hooked up to my route
Open AirPort Utility
Hold down the option key on your Mac while you double click on the AirPort icon
Click on each wireless device displayed for more info about that device
Also, my Verizon Network Extender is not working with my new airport express router?
Apple uses proprietary settings for their "extend" feature on their routers, so it would be extremely unlikely that a device from another manufacturer would be compatible for this purpose.

Mifi 4620L - how do I determine which devices are using my data?

Similar Messages

Maybe you are looking for