MiFi 5510L Problem Local Internet Access only

Set up the new jetpack 5510L model and when trying to connect to the internet I get Local access only - will not get me online. Any ideas?

First line of defense is the various resets:Level 1 - Power Cycle the device
Level 2 - Remove the SIM card while powered off
Level 3 - Restore the defaults from the button under the back cover
Give each of these a try and check your internet each time. If the problem is temporary then this should clear it up for you. Let us know if you need more help from here and we can try some other troubleshooting steps. We'd have to know what OS your connecting device is running to provide you with specific steps.

Similar Messages

Ethernet cable internet access only No WiFi in hotel MBA user

Am assuming I need to carry my own Airport Express with my MBA as I am in a hotel that has ethernet cable internet access only - no WIFI? If so, what do I need to know about how to get MBA and Airport Express to "talk" to each other in these types of hotel situations?
Thanks for your assistance
PEM

Hi Elegba,
Curious... did you consider the USB Ethernet adapter for the MacBook Air? A whole lot cheaper of a solution for a hotel without WiFi. Not to mention, I've found (after initially struggling to justify the purchase) that I use mine more than I originally thought.
However, to answer your question. You'll connect the Ethernet to the AirPort Express Base Station and configure it via the AirPort Utility on your MacBook Air. It's very straight-forward and you'll be creating a wireless network. You may need to first get setup with your 'in room' connection, though, I know most hotels have a proxy connection for web access. While you should still be able to setup the Express, it's just something to keep in mind.

Vista Ultimate: Local Network Access Only (Wired and Wireless)

Alright, I am not very experienced working with Windows Vista, and I'm having serious trouble solving this problem. I've been searching for solutions for two days and not found anything that works.
The computer is a Compaq Presario A900 running Windows Vista Ultimate (Service Pack 2). My brother used the computer's wireless internet connection for four years without problems, but lost all internet access when he returned home a couple months ago. The
computer will connect to any network, but has the message "Unidentified Network - Access: Local Only".
The computer first had the problem trying to connect to the Internet through an iPhone's Wifi connection. It happened again on the wireless network at my home. I took the computer to work to test it with a wired connection and had the same result.
I originally thought this was only a wireless problem and completely uninstalled and reinstalled the Atheros wireless card drivers.
I have completely disabled the Windows Firewall and removed all Anti-Virus (Avira free was installed - Norton is not on the computer). I have tried Safe Mode with Networking, and it does not fix the problem.
I ran a Fix-It yesterday that was supposed to fix specific registry errors, but that did not solve the problem either.
I also found a solution on this website that involved enabling sharing. One user said it fixed the problem, but it did not solve it for me.
The only thing I am certain of is that this cannot be a problem with the router. All three places I have connected have various other computers connected constantly: The iPhone regularly connects a different Windows Vista-powered laptop, Windows XP Desktop,
and Windows 7 netbook to the Internet. My wireless router successully connects a Windows XP Desktop, Windows 7 laptop, and Macbook. Obviously, the wired connection at work successfully connects over a dozen computers.
I'm out of ideas on this one...thanks.

Hi,
I've been having a similar problem; am not able to connect via wifi at our new home, but am able to connect easily at an internet cafe. Obviously, I'd like the convenience of getting connected at home! :) Getting "unidentified networK"
and local only access. Also had the same problem with the yellow ethernet cable & LAN, but finally found a partial fix online somehow so am at home using the internet now. But it is still a PITA, because every time I step away to take
a break from the computer, it goes to "sleep" and loses the connection, so I have to do a restart to get the internet connection back. And it would be much nicer to get the Wifi problem fixed, so I can move around the house to a more comfy spot rather
than being shackled in the corner by the yellow cable! :D
I will attach a screenshot of the ipconfig as suggested above, but am not all that savvy, so would appreciate step-by-step instruction how to solve this problem. I've tried a lot of suggestions, but nothing has worked yet... hoping someone here can help. Thanks
in advance! :)
oops! edit to add: grrrr, it wouldn't let me include the screenshot unless I verify my account, which I have not figured out how to do yet... another hurdle!

Lumia 920 service problems/ no internet access. Also problem with receiving calls?

As of yesterday I have been having a wierd problem with my Windows phone, and exploring through the web, I've seen a couple of other people with this problem as well, with no one really coming up with any other solution but to do a hard reset, which I abosuletly want to avoid. So my problem is that I don't seem to have any internet access, regardless if I am connected to 4G or through wifi. This is real wierd because it just started happening all of a sudden. I didn't do any update, didn't download anything new, nothing like that.I know for a fact that I'm simpily not just mistyping addresses or have airplane mode on, I'm stumpted as to why this is happening. To add another layer of confusion, I don't seem to receive all calls I get. For instace: yesterday, one of my friends called me, I received his call right? Well later that day, my Father apparently called me, but I never received any nottification or even a voicemail that he ever did. What the heck is going on here and what can I do to resolve this??

Hello @ThomasWolf
I’m sorry to hear you’ve been experiencing issues with your phone.
When you say you’re unable to access the internet, is it just via your Web browser? Or is it apps that require data such as Facebook, YouTube, etc.?
Have you tried via more than one Wi-Fi network as well?
Try to open up att.com/ttr via your mobile web browser; do you see a confirmation page?
If you’re continuing to have issues, then please contact us.
Thank you,
Charise

Problems in Internet access in the middle being a modem and Linksys RV016

Good afternoon, I have another problem with Cisco Linksys RV016 Router, the router used to connect to ADSL Internet 3 links which these in turn give direct service to a server right now each of them, the idea is to connect the 3 modems LAN router and connect the server, this is no problem so far. The point is that here at my work people access to Remote Access Servers for Windows and VNC TightVNC or my servers with Linux (ask why not login at TeamViewer or LogMeIn, but it is another matter), the idea is to leave as they are, that everything is apparent and improve systems with load balancing (Router). The modem has ports open for remote access the 3389, are accessed without nigun problem, but when connecting the router and can not, I opened the same ports in Router and name and works.
Servers handle the no-ip.org for access and name resolution on DNS and so with that name assigned by the no-ip is where remote access from the Internet.
I do not know if you understand, but I hope someone help me with this.
In advance thank you very much and greetings.

Look, the first phase of my work to be done is to try a single server and it has Windows Server 2008, you explain:
1. This ADSL modem connected directly to a single server (Windows).
2. It is accessed without any problem by remotely from another network and / or from the Internet via remote access.
3. The modem has port 3389 open to allow remote access from another network or Internet (up to here is my current scheme and there is no problem).
4. Connect between the modem and Linksys RV016 router server.
5. I open the same ports with the modem for remote access.
6. If I have Internet server.
7. Remote access is not working.
As time??? something can be done to solve this problem. The server as you mentioned earlier is running as a service no-ip.org for publication DNS name and not have to be constantly changing the IP by automatic changes made by the supplier (eg server name and for which so is taken from the internet: servidorwin.no-ip-org).
See if you explain me better.
Thanks in advance and greetings.

WLC ACL For Internet Access Only

I've implemented Cicso ISE 3495's with the advanced subscription license. I've built my policy sets, and authorization profiles. It all works great! Here's the issue that I'm having. I have internal employees who bring in their own devices (BYOD). I want to allow them onto the secured SSID that I've created, but only want to give them access to the intra/internet. I've created an ACL (EmpInternetOnly) on the WLC. Here are my rules:
I can get to the intranet, with no issue (ACL lines 1-4). I can't get to the internet whatsoever. I see everything falling down to the deny statement. When I remove the deny statement (ACL line 14), and put a permit all, then the internet works with no issue. Am I missing something here? I've researched this topic on several message boards, but can't find an answer. I've tried to run the acl debug, on the controller, but do not see any output when I run it. It might be because I don't understand the proper format of how to set it up. Any and all replies would be much appreciated! Thanks!
Steve

Internet access only available for a few seconds before dying

I've just purchased a new iMac and I'm having problems connecting to the internet. I have a DSL modem router which is configured up and working correctly. I can plug my old PC into it and it works fine, however when I plug it in to my new iMac I have to reset it and then I get about 20 seconds access before it dies. The IP address is still assigned and everything but all traffic seems to stop. If I reset the router again, I'll get another 20 seconds access once it finishes booting. I don't think it's a router issue as I can plug a windows laptop in also and it works fine.

Those settings would appear to be correct, so the computer is getting the IP number from the router.
I tried a ping test against www.apple.com after resetting the router, and it was an unknown host . . . Yes, it gave me nothing either: 100% packet loss; but another www address was OK.
If you enter that router IP number in a browser, do you get a configuration page for the router itself? Does the router need a WEP or WAP password?
Have you also tried, (A) setting up a new Location rather than use the default, "Automatic" or (B) creating a new user account and setting up from there?
What router do you have, by the way?

Wired Internet Access Only

if only a wired internet connection is available, is there a coverter for my IPAD2 that will allow me to connect to an ethernet cable?

There is no ethernet connection available. If there is ethernet available there should be a wifi router available.
 Cheers, Tom
You could use a Travel Router
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH &Description=travel+router&x=0&y=0
Message was edited by: Texas Mac Man

Sound problems in internet videos only

I'm using a sound blaster xtremegamer, today when I tried to watch a video on youtube I didn't get hardly any sound. The only sounds that came through were high pitched almost inaudible squeeks and a few muffled bassy noises from the woofer. The sounds from itunes and all my other programs still work fine.
Anyone know what the problem could be?

Open registry editor by going to Start menu, Run, typing regedit and then Enter. After that, in the registry editor, walk yourself through the tree in the left pane, till you reach
My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Win dows NT\CurrentVersion\Drivers32
And then on the right pane, right click and click on New, select String value, enter "wavemapper" (without quots of course), ENTER, type "msacm32.drv", ENTER.
Close the editor.
?good luck.

Disable internet access only for specific time with GPO?

I need to be able to disable web browsing during specific times (night shift for example). I know I can create a GPO policy and set a 'fake proxy' for IE that would blanket kill browsing but I don't want to have that enabled 24/7. Is there any way to do only from like 5pm - 5am.
Or is there a better way to do this? I know I could setup a Squid Server and set time limits through there. Was just curious if it could be done through AD.
This topic first appeared in the Spiceworks Community

Ok, I just thought of a way to do it with GPO.Create the gpo to setup the fake proxy setting and also lock out the proxy setting to keep the users from disabling the setting.Setup targeted application of the GPO based on a specific AD group. Depending on if you setup the GPO policy under computer or user you can add either user names to this AD group or add computer names to this group (you could also create a nested group so you are only adding and removing one name from the targeted GPO group). Setup the task scheduler to add and remove names to this gpo application group based on time of day. Understand there will be a delay of up to 2 hours between the time the user is added to this group and the application of the GPO to the target computer. It would appear a bit clunky, but it should work.The squid route would be a bit more...

Need Advice On Internet Net Only Plan

Because of a change in my life circumstance, I need internet access only in my home. ( Have cell phone and no tv services required) My Verizon contract recently expired and now my bill has gone up by $35.00 per month. I have been a long-term Verizon customer and have called for assistance but basically am told there is nothing they can do about it.
I am a senior citizen and would like to know other suggestions. Please help.

Look into what JOSE mentioned above since FiOS is hands down better if you can get it, but it's very unlikely that you're going to be able to get standalone DSL from Verizon. Verizon quit offering Standalone DSL a long time ago, and the only way to get DSL without a landline from them now is to order DSL through a reseller. DSLExtreme, MegaPath, Cavalier, and some other resellers are notable.
Also, if you use any significant amount of data for Internet, avoid using mobile phone Internet. That's going to cost you if you start blowing up your data limit. Good move sticking with the flip phone on that note, for that exact reason.
Some other options you have too, is to downgrade a landline to lifeline service only, which should bring the bill down quite a bit, but satisfy Verizon's requirement for a landline. Otherwise, you may want to also take a look at your local Cable company. Many advertise only their bundled packages, but most will be happy to sell you just an Internet package, although it tends to cost a little more than DSL.
========
The first to bring me 1Gbps Fiber for $30/m wins!

No Internet Access after 20 minutes in the router Linksys E2500

Hi,
I have a new Linksys E2500 router. Whenever I try to connect to the internet, it works only for 20 minutes. This problem started 15 days ago. At the first time, the problem was with the Internet Service Company, " Comcast ". After they had fixed the problem, the internet worked only by a direct wired connection between the mofem and the laptop. But when I connect the modem to the router, the internet works only for 20 - 30 minutes. Knowing that I tried the following: 1 - to use wo different laptops ( windows 7, and windows 8 ); 2 - to use differenet DSL cables; 3- to power down the modem , the router, and the laptop , then I turned them on in that order, but the problem is still existed.
Have any one faced this complicated problem before ? Please help me .
Spoiler (Highlight to read)

@alimil,
I agree with jibjib. Changing the local IP address of the router may help resolve the issue specially if your modem is a gateway.. Aside from that, check the firmware of your router. Upgrade the firmware if it’s not the latest. Click this LINK for the latest firmware. Cloning the LAN mac address of the computer that’s able to go online with your modem can also fix the issue.
Try to do these steps…
Connect a computer to the modem and make sure it’s able to get online.
Once the computer is online, disconnect the computer from the modem and connect the computer to one of the numbered ports of the router (ex.Port #4).
Clone the LAN’s mac address of the computer. Click this LINK on how to do it.
After cloning the mac address, connect the modem to the internet port of the router.
Check the status page of the router if you have an internet IP address. If you have an internet IP, try to go online with your computer
If the computer is online with wired connection, proceed with wireless configuration.
If not online, restart your computer
Goodluck….

Using 2nd Built-In Ethernet port for internet access?

Hello,
I have a Quad-G5 running 10.4.8. In its current configuration, all its network communications, including web access, go over the active ethernet port (Built-in 1).
Does anyone know how I could use the second built-in port for internet access only? I'd like to route local traffic over the first port, but go "out" over the second.
The machine is on a corporate network, and proxy access is slowwww. I have the ability to use a direct connect to the internet, but still need to be connected locally. Any thoughts? Many thanks . . . JD

Easy. Go to System Preferences > Network > Network Port Configurations and drag the port connected to the internet to the top, so that it has priority over the port connected to your LAN. This prevents DNS time-out when loading a website, but still allows LAN traffic over the other port because that traffic is most likely going to use ARP rather than DNS. For good measure, you can add your company's domain (such as "my_company.lan") to System Preferences > Network > Internal_Ethernet > TCP/IP > Search Domains.

No Internet Access on Lenovo 3000 N200

I have a Lenovo 3000 N200, recently upgraded to Windows 7.
The problem - no internet access - first occurred after uninstalling software as per Win 7 Upgrade Analyzer.
I have since done the Windows 7 upgrade and re-installed various drivers but the problem persists.
The symptoms are that :
ping does not work, including ping localhost which yields a General Failure message.
I can connect to my home wireless network but am not issued with an IP address.
When I set the address explicitly I still do not get internet access.
Messages from diagnostics include "cannot see router"
My Linksys Advisor on another PC attached to my home network can see the Lenovo when I set the IP address.
Another laptop (Toshiba) upgraded to Windows 7 OK and can connect to the router and internet.
Tried the a wired Ethernet connection to the Linksys device but that doesn't give me Internet either

Hello, I am trying to install win 7 ( same laptop as yours)
1/ did u solve the internet problem?
2/ where did u got all the other drivers, was it the lenovo official site ? i didn't see there win 7 supported drivers.
3/does it mean that the drivers are of XP/Vista?
please post
thanks,
Gilad

Restrict Wireless Guest Internet Access

I am implementing a wireless guest solution for Internet access. I would like to restrict these users to Internet access only. I undestand the concept of configuring a seperate vlan for them but how can I restrict them to Internet only. I also have remote campuses that I would like to setup as well. I have an ASA 5520 for my firewall and am using metro ethernet from the main campus to the remote campuses. Thanks for any help.

Hello,
I have found the simplest way of doing this is to apply an access list to the radio sub-interface for the vsitor vlan.
Set the access-list to allow any dhcp requests, deny any to a private network and permit any.
You could do it back at the ASA but there is a chance of the traffic getting onto the network first.
HTH.
Andy.

MiFi 5510L Problem Local Internet Access only

Similar Messages

Maybe you are looking for