Mifi - how do I get this to work with my Mac?
I tried last night, and had zero luck - am I missing something?
Has anybody been successful, or should I just go back to my old access method?
Thanks . . .
bethedwards wrote:
I tried last night, and had zero luck - am I missing something?
Has anybody been successful, or should I just go back to my old access method?
Thanks . . .
What was it that you tried?
I have connected to Windows XP and 7, iPod Touch, iPad, and Blackberry.
Works better than the free WiFi at Starbucks for me.
Clarence
Similar Messages
-
My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?
1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host> -
Email messages from my icloud account update on all my devices showing if they have been read and if a reply has been sent. This does not happen with my tinyworld (TalkTalk) email account. Can I (how can I) get this to work with TinyWorld?
You have to look at the email protocol being used. the Apple email system uses IMAP, does Tinyworld use IMAP or POP?
Does the email system permit delivery receipts to be requested?
Just some of the things one needs to determine from the information provided by the email service provider. -
How do I get iCloud to work with my mac that has snow lepard and is pre intel?
How do I get iCloud to work with my mac that has snow lepard and is pre intel?
Richard Kerns wrote:
And it kills me that a friend who has pc computers and just has an iphone and ipad can breeze through all this with no problem and he still has XP. So Apple goes back and helps old OS for pc but not for it's own kind!!!
Richard, I agree with you 1,000%. I wrote this in a forum a few weeks ago, when a user was complaining about Snow Leopard not supporting iCloud:
Why is it that if I bought a Mac before July of this year, I must pay to upgrade my operating system in order to take advantage of iCloud? Meanwhile, a Windows Vista SP2 user, who bought a new computer in May 2009, already has everything they need on their computer to use iCloud.
Why was it possible for Apple to write a free iCloud Control Panel that was compatible with existing versions of Windows, but Mac users must buy an entirely new operating system?
If Apple gave Mac users the same amount of backwards compatibility that it gives to Windows users, people with OSX 10.5 (Leopard) would be able to use iCloud. That's something to think about the next time you go to purchase a new computer.
(P.S. Something else to think about: If you bought a Mac before October 2007 (when OSX 10.5 was introduced), your computer won't run iTunes 10.5 unless you buy an upgrade. But a PC user, who purchased their computer as long ago as Sept. 2004(!), can run iTunes without an OS upgrade.)
I got so angry thinking about this, that I ended up writing an angry note to Apple on their feedback page. After repeating what I just wrote here, I asked them to commit to providing at least the same level of support to Mac users that they do for PC users when it comes to their cross platform products (iPhone, iPad, iCloud, Apple TV, Safari, iTunes, etc.) And, really, is that so much to ask?
I wish I knew how to start a petition requesting that Mac users get comparable treatment as PC users. But then again, shouldn't that go without saying?
Please leave feedback about this revolting double standard on the Apple feedback page. They should be thinking long and hard about why their own customers are treated worse than the customers of their competition. -
How can I get this to work with NAT?
Hi Masters,
I need to add a route-map to a static NAT but the option seems to be available only if using inside/outside NAT, not if using enable NAT.
This is a CISCO1921/K9 running 15.2(4)M6
Here's what I mean:
R2(config)#ip nat inside source static 192.168.3.20 10.10.10.20 ? --> allows the route-map option to be appended
extendable Extend this translation when used
mapping-id Associate a mapping id to this mapping
no-alias Do not create an alias for the global address
no-payload No translation of embedded address/port in the payload
redundancy NAT redundancy operation
route-map Specify route-map
vrf Specify vrf
<cr>
R2(config)#ip nat source static 192.168.3.20 10.10.10.20 ? --> no route-map option
extendable Extend this translation when used
no-alias Do not create an alias for the global address
no-payload No translation of embedded address/port in the payload
vrf Specify vrf
<cr>
What I need is multiple dynamic and static NAT rules between multiple interfaces, so I need a way to assign multiple static NAT depending on the destination.
For example, if server 192.168.3.0 wants to go to VLAN A, get statically translated to IP 1.
If the same server 192.168.3.0 wants to go to VLAN B, get statically translated to IP 2.
AS far as I know I need a route-map attached to the static NAT statements to make this happen, but the option is not available as shown above. And I don't want to use normal inside/outside NAT since I need the interfaces to allow NAT in both directions.
If anybody can share some light will be very appreciated!Paul,
The commands:
ip nat source list or ip nat source route-map works fine for dynamic NAT or PAT, but I need static NAT.
And the Static PAT statements won’t work since we need all ports defined.
So, I guess I need a way to map static NAT depending on the destination using domain-less NAT.
Can this be accomplished? -
Chapters and Play all - how do I get this to work with a one hour project?
Hi
I have a one hour project and at the moment I have it in one track with a Main Menu, Chapter menu and a bridge menu for the loop point.
I have 5 chapters and want 2 functions to happen in my DVD structure:-
1. the Play All function
2. and the Chapters to play each individual chapter and then go back to the Chapter menu when it;s finished.
As my project is now, the play all feature won't work, it is like it's the CHapter menu.
In the past I've had a track for the play all and then separate tracks for each chapter. Is there a way around this - do I have to do that fancy encoding (which I have no idea how to set up.
I have 5 chapters and would love some help to construct this as I don't think the 2 hours would fit on my single layer DVD and it would be a lot more exporting work.
Hope you can help.
Cheers
MargieYou may want to use scenarios in this situation.
click the "add a scenario" button, an add as many scenarios as you have chapters.
Then double click on each scenario option.
You will see a list of chapter appear on the left of your timeline area.
Drag the chapter you want to play solo to the empty list on the right ("scenario markers").
Make sure you then select that chapter marker in the scenario Marker list, and choose "end jump: main menu". Also make sure that your gobal scenario end jump is set to your main menu too.
Then link you buton to that scenario and repeat for the other chapters.
hope that helps.
tee. -
After updating to Firefox 5 my Realplayer Recorder is not working due to that add on not being compatible. How do I get this to work again?
Blue
It sounds like you restored from an old back-up. Did you back-up just before your software update? It will use your last one and if your last back-up was a ywear old then it will use that one.
In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
Sorry for your losses.
Cheers -
I am using Numbers on my iPhone5 and cannot get the app to do a simple (SUM) calculation. It shows the formula correctly in the cell, but all I get for my long list of numbers to add is 0. How can I get this to work?
Oaky, at least we got that far. Next step is to determine if all those "numbers" are really numbers. Changing the format to "number" doesn't necessarily change the string to a number. The string has to be in the form of a number. Some may appear to you and me as numbers but will not turn into "numbers" when you change the formatting from Text to Number. Unless you've manually formatted the cells to be right justified, one way to tell if it is text or a number is the justification. Text will be justified to the left, numbers will be justified to the right.
Here are some that will remain as strings:
+123
123 with a space after it.
.123 -
On the fifa 14 iTunes app it won't let me turn on device music, how can I get this to work?
On the fifa 14 iTunes app it won't let me turn on device music, how can I get this to work?
I have bought full access to it.1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host> -
I got a movie (the mist) from the itoons store. My ipad says I can not play it. How do I get this to work????
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
-
I purchased Acrobat Pro for Mac on Amazon. When I try to register with the registration code they give me, it doesn't work. (It has letters and the registration boxes won't accept letters.) How do I get this to work?
If you don't have original install disks for your Mac, you can order replacements disks directly from Apple at a nominal cost. The original install DVDs are required to reset the password.
If you have no data on your drive that you want to keep, you can boot up from the OSX Snow Leopard disk and install OSX SL.
Insert the Snow Leopard DVD and hold the C key during startup. The Mac should boot from the CD/DVD drive into the installer.
Follow the prompts, erase the disk and install OSX Snow Leopard. -
I was recently prompted to update iPhoto and make changes to the library. I did it but it keeps hanging up in step 5 or 6 and won't complete the cycle. I have used force quit, rebooted and started again several times. How do i get this to work?
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
If that fails:
Restore from your back up, repair the Library and try again. -
Negative (to inline a letter or to thin it) offset path does not work in Illus-CC 2014 (when preview is on- nothing happens). How can I get this to work like in previous versions.
Thanks for your quick reply. I tried a number of different values. Usually when I do a negative offset they're very small values, like -.25 or -.5.
An Update- I took the art work into Ai CS 6 and It still did not work, which is really strange. And I've used it hundreds of times with success in the past. Also I tried it with live type and outlines, ungrouped, un-compounded still could not get it to negative offset.
Thanks for the help. -
My laptop has broken and i have been given a new one by apple - this has changed my serial number so my Adobe Ps,Ai etc are not working and say my licence has expired. How can i get this to work?
uninstall anything adobe 'migrated' to your new mac, clean and then properly install, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
if you need an activation count reset, http://helpx.adobe.com/x-productkb/global/service1.html -
when I go to change my security questions there is a not forgot option how do I get this to work?
That option will only appear if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account. If it's not appearing then I assume that you don't have one, in which case see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551
Maybe you are looking for
-
I have a Hitachi 500GB Go usb disk and its throwing Invalid node structure errors. I tried ripping an image from this disk, after about an hour or so of data copied (approx 100GB in the dmg) it will just close out and delete the .dmg, no errors, no n
-
Hi all, I have a question about the perfomance in a scenario. I have 250 files zipped (45Kb average each file) in a ftp folder, and I'm using File Adapter to pickup this zip file, and then unzip it, and then process the files which contains, next eac
-
How to capture the data of the fields of a particular subform
xfa.data.saveXML() saves the data of the whole form, but I need to capture the data of a particular subform .. How do I do this...?
-
I need to know the name of the file that contains my "about:config" information.
When my Firefox was updated to the latest version I was no longer able to print, save images and more! I tried downgrading at least 6 times with a few different versions with no success. When I look at my "about:config" page there is NO reference to
-
If I was to buy a mac mini what hertz would my tv have to be?
I was wondering if I was to buy a mac mini what hertz would my tv have to work at?