Migartion Exchange2003 to Exchange2010 Sp3

Good Day ,
I Finished the migration from exchange2003 to exchange2010 SP3 with success , now I m in the last step decommission exchange 2003 server :
I saw in some links I must follow this steps :
1-cut mail flow over to the 2010 server
2-Convert Address Lists and Email Address Policies ( I don't know how I can do it ?)
3-Remove the Public Folder Database
4-unistall exchange 2003 server
Can you advise me before to start this stepwill be thankful
Reagrds
e

Here is how you upgrade the default address lists and policies to 2007+
http://technet.microsoft.com/en-us/library/dd351283(v=exchg.141).aspx
http://technet.microsoft.com/en-us/library/dd335105(v=exchg.141).aspx
The rest of the steps are described here:
http://technet.microsoft.com/en-us/library/gg576862(v=exchg.141).aspx
Mike Crowley | MVP
My Blog --
Planet Technologies

Similar Messages

  • Exchange2010 SP3 RU4, database in a DAG setup fail error 3145

    We are an Exchange 2010 sp3 ru4 running on a hybrid Physical(MB servers) virtual (CAS/HUB servers) with 6 DBs' inonw DAG in a single site with local witness server.
    We experienced a failure on one of the DBs wit an error 3145 "
    Incremental seeding of database xxx\MB01 encountered an error. A
    full reseed is required. Error: The Microsoft Exchange Replication service failed
    to determine if the log files in database 'xxx' are divergent from
    the source copy on server 'xxx.xxx.local'. Error: There is not enough
    space on the disk."
    There is no issue with the disk space for the databases or logs or local drives for either MB servers!
    I have initiated a suspend and fail for the DB in discussion and initiated a manual seed from the good (only) copy.
    I want to know though, which disk is detected here with not enough space? could it be that MSExchangeRepl service couldn't get the disk usage report from AD in due time and decided to fail the copy
    and activate the other?
    Any pointers would be greatly appreciated.
    Ash

    Not sure, I've never had to mark a question before.  But I looked up the question in the FAQ -
    http://social.technet.microsoft.com/wiki/contents/articles/7359.forums-help-faq.aspx#257 and found this:
    How do I indicate a post answered my question? 
    To mark a post as answer, click Mark as Answer beneath the post. You can unmark a post as answer by clicking Unmark as the Answer.
    JAUCG - Please remeber to mark replies as helpful if they were or as answered if I provided a solution.

  • Eevent ID 1114

    Good Day ,
    I did a migration from Exchange2003 to Exchange2010 SP3 evrything work fine except i saw in event viewer this warning
    Description:
    Table was marked as in use while releasing a database session on database "Mailbox Database ".  Problem will automatically be fixed.
     Table type was tbtBody, table name was Body-562-A9278, and transaction level was 0.
    I don't know why , can sameone help me please
    Regards
    e

    Hello,
    I find many similar threads, but there is no proper solution to fix the issue. Based on my known, the warning will not affect your exchange server.
    Cara Chen
    TechNet Community Support

  • Install or not install - exchange 2010 update rollup 4 sp3

    Hi guys!
    We have Exchange2010 SP3 with update rollup 2.
    Users with IE11 are having problems with OWA opening only in light mode. I have read on the internet that CU 4 solves this problem but on the other hand this CU makes additional problems with outlook 2007 clients.
    Some of the comments of this issues from other companies are: In Outlook 2007 if you choose to change the current view with Arrange By 'Categories' the following is noticed: - Items that you set unread or read are not changed until you refresh the view
    - If you open an unread email by doubleclicking, it's status stays unread until you refresh the view. - New mail items are not automatically seen until refresh. This is a very annoying issue, and our servicedesk already received a lot of calls for this issue
    Is there any workaround to fix IE11 OWA light mode and not corrupt Outlook 2007 user clients?
    bostjanc

    It happens as MSIE token is removed from the user-agent string in IE11.  This made the Exchange team provide an update on the Exchange side to fix this issue. The workaround is to use Compatibility Mode in IE11 for OWA. As for the fixes:
    2003: Use workaround, no fix will be released
    2007: Use workaround until a fix is released, currently a fix is tentatively planned for release in E2007 SP3 RU12
    2010: Install
    E2010 SP3 RU3 or use workaround
    2013: Install
    E2013 CU3 or use workaround
    O365: Issue is already fixed, no action is required
    Thanks,
    Jason
    Jason Apt, Microsoft Certified Master | Exchange 2010
    My Blog

  • Exchange 2010 Rollup 2 SP3 update cannot find installation package exchangeserver.msi file on SBS 2011... NEED HELP!!!

    Hello,
    I am running a windows SBS 2011 standard system and there was currently an update for Exchange 2010 Rollup 2 Service Pack 3 and it keeps failing.  It says that it cannot find the installation package (exchangeserver.msi) and it is looking for it
    in E:\Software\Exchange2010-SP3-x64\ folder but there never was this folder.  There is only an Exchange2010-SP3-x64.exe file.
    The only exchangeserver.msi file that I find on the server any where is in C:\ProgramFiles\Windows Small Business Server\Bin\CMPNENTS\EXCHANGE14_SP1 but it won't accept it (says not authorized for this update or something alike).
    Please help.  It is currently causing issues with email.  Some of the features are not working because it says exchange is currently under maintenance.
    Any suggestions would be greatly appreciated.  Thank you.

    Susan you are correct:  After I installed Exchange 2010 SP3, I deleted the msi just to "clean up' my hard disk...  While trying to install Rollup 2 for SP3, the installer is trying to find it.  I downloaded the installer, used 7-zip to get
    the msi and I pointed the installer to it when asked.
    The installation failed 3 times... 
    NOTE: I was using WSUS to install the Rollup:  I downloaded the Rollup installer and I executed:  I could see where the installer was hanging up!  First it asked me to stop an SBS service and something else (sorry I do not remember), I stopped
    the services and installation continued.  Then it asked me for more files from the SP3 installation which I found on the installation folder that I created with 7-zip.  I copied to the path that the installer was looking and installation finished
    (finally!)...
    NOTE 2:  If you have any firewall appliance that denies Internet access to un-authenticated requests, you better turn that rule off because the installer accesses the internet (not sure why - probably for Dot Net assemblies)...
    Susan THANKS for all your help to the community!  You have helped so much! 
    All the Best
    Constantine

  • Remove exchange 2003 error

    good day ,
    I start to remove Exchange2003 after success migration to Exchange2010 SP3 I delete the connector
    w2k3-w2k10
    w2k10-w2k3
    I followed this link step by step:
    http://technet.microsoft.com/en-us/library/gg576862%28v=exchg.141%29.aspx
    I have two exchange2003 one w2k3frontend and w2k3exch
    for w2k3frontend from add/Remove program is not working I did it with ADSIEdit
    but for w2k3exch I get this message:
    This server is the master routing routing group first routing group that contains other serveurs.Impossible uninstalling this server without first select a new master routing for this routing group or delete all servers in that group routing .
    This server is the server update recipients for the domain. you can uninstall only after selecting another server update of recipients for this area.
    so if this still master routing and  the server update recipients for the domain so no problem if I delete from ADSIEdit .
    can you please help me
    Regards
    e

    Zikorai,
    From what you are telling us, you won't be able to remove Exchange from that system using the setup program - go ahead and remove it manually, both from the server (if necessary) and from the directory (which will definitely be necessary) using the links
    we have provided. Here are some good ones:
    Removing Exchange 2003 from the Server:
    This one is only necessary if you need to remove Exchange but still have the server operational for other purposes - for instance, if it is also a domain controller - http://blogs.msmvps.com/bradley/2011/01/28/manually-removing-exchange-2003-from-the-migration-process/
    If the server isn't required for any other purposes, rebuild the operating system on it
    Removing Exchange 2003 from the Directory:
    Go to the "Remove the Exchange Server 2003 server from Active Directory" section of this link for how to remove Exchange 2003 from the directory: 
    http://support2.microsoft.com/kb/833396/en-us
    One note from Ed Crowley, Exchange MVP - "Do not remove the Exchagne 2003 administrative groups unless you want free-busy problems, leave them there forever."
    This should leave you with a system that has no Exchange 2003 and Exchange 2010 is running smoothly with no issues.

  • Installing second Exchange server 2010 with all roles (CAS, HT and MB) in the same domain?!

    Dear all,
    first of all thanks for reading this topic :-)
    In our enviroment, we have a Exchange 2010 server (Version: 14.01.0438.000), whitch is installed with all server roles (CAS, HT and MB) on one server(OS is Windows Server 2008 R2 Enterprise). This exchange server sends all external mails to a smarthost (Redddox).
    We are using Outlook Anywhere, Active Sync and OWA.
    Now, we need to migrate this Exchange server to another one, because we think, that the server´s OS is corrupt and also, there are wrong licenses installed. The "new" server will have the same OS Version and Exchange Version (2010).
    Currently I´m a little afraid, to install a new one - because I think when I will install the CAS and HT role, something will happen in my productive enviroment (Autodiscover, SMTP Connectors, Cerficates a.s.o.).
    To install the mailbox role, I think this will not affect anything.
    Can you help me a little bit in what to take care of? Do I need to preconfigure something, before I will install the second exchange? What about the version / service pack of Exchange to install? Must it be the same as installed on the first one?
    Any help would be appreciated!
    Jennie

    Hi Jennie,
    Below are the steps if you are not planning to upgrade.
    1) Install new Exchange2010-SP3 Server all roles Please check
    this
    2) Install the certificate in the new server by requesting a duplicate from the 3rdparty CA. Or export from the existing Exchange 2010 and import to the new one. Please check
    this
    3) Set your autodoscover, OAB, ECP, OWA URLs same as the current Exchange. Below artciles will help you to do that.
    For OAB, Autodiscover, EWS please check steps 5,6,7in this
    For setting OWA and ECP URLs please check
    this.
    4) Move few mailboxes as a test and check. If no errors move the rest.
    5) Move your OAB generation server to the new server. Please check
    this
    6) Move you public folder contents to the new server you have. Please check
    this
    7) Configure your firerwall to receive emails on the new server and other services like EWS, OWA, ActiveSync.
    8)
    Add the new server as the source server and in the current send connector and remove the old server from the send connector.
    Shutdown the server for a couple of days and monitor. So you will know if you missed something.
    Uninstall Exchange2010 from the add remove programs.
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Common.js error cannot manage groups through ECP

    Did anyone run into this issue, we login through the ECP website and try to manage the members of a group and receive the following error. I tried an IISRESET , didnt work, Exchange2010 sp3
    Client Information
    User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E; MS-RTC EA 2; MS-RTC LM 8)
    CPU Class: x86
    Platform: Win32
    System Language: en-us
    User Language: en-CA
    CookieEnabled: true
    Exception Details
    Date: Wed Nov 26 15:32:28 EST 2014
    Message: 'undefined' is null or not an object
    Url: https://server/ecp/14.3.158.1/Scripts/common.js
    Line: 189

    Hi,
    Based on my knowledge, it seems not an issue on Exchange server side.
    Please use IE Browser for testing. How about changing other Web Browser?
    If all Web Browsers have the same issue, please check this KB with IE:
    How to troubleshoot script errors in Internet Explorer
    https://support.microsoft.com/kb/308260?wa=wsignin1.0
    Also try to open IE and go to Tools->Internet options, then Advance tab and click Reset.
    Thanks
    Mavis Huang
    TechNet Community Support

  • FreeBusy lookups from Outlook2013

    I am currently working through migrating users from Exchange2003 to Exchange2010. Users that have been migrated are using Outlook2013.
    Currently - migrated users (Exchange2010 and Outlook 2013) are scheduling meetings but getting the following error when querying legacy Mailbox users (Exchange2003)
    "The resource that you are trying to use is located on unsupported version of Microsoft Exchange"
    Public Folders (system Folders) are being replicated between the two environments.  These lookups work fine for migrated users that are using Outlook 2010 (on Exchange2010) and OWA works fine. It just seems to be an issue with Outlook2013.
    Can someone explain how lookups on Legacy homed FreeBusy works?
    As per this exchange2007 article (http://blogs.technet.com/b/exchange/archive/2006/10/23/3395177.aspx) I expected the Outlook client would rely on the Availability service of Exchange2010 to obtain this information. However by looking at the "Outlook
    Connection Status" I can see that the legacy EX003 mailbox server is being attempted to be accessed by MAPI.
    Ultimately I am attempting to find out if there is a way around this issue whilst the migrations are complete.

    The Caldav scheduling spec says "The "ORGANIZER" property value in the "VFREEBUSY" component MUST
    match one of the calendar user addresses of the owner of the Outbox
    collection.". So I would say the Outbox of the user on whose behalf the request is being made.

  • DNS A record exchange 2010

    Good Day ,
    I did migration from Exchange 2003 to Exchange2010 everyting working fine execept webmail externaly , I have one question if I creat in second A record exchange 2010 (because I have one for exchange 2003) and I go in firewall I change NAT from exchange2003
    to Exchange2010 just for test is possible (mean one public addresse) ?
    If you can help me I will be thankful
    Regards
    e

    Hi,
    According to your description, you set your Exchange 2010 server as internet facing server. And your configuration is proper. However, for OWA in Exchange 2003 and 2010 coexistence environment, we also need to take the following actions:
    1. Establish the legacy namespace for Exchange 2003 server.
    2. Create the legacy DNS record.
    3. Configure the OWA virtual directory on Exchange 2010 for Exchange 2003 server:
    Set-owavirtualdirectory –identity <exchange 2010 OWA name> -Exchange2003URL
    http://blogs.technet.com/b/exchange/archive/2009/12/02/3408921.aspx
    http://exchangeserverpro.com/exchange-2003-2010-coexistence/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Thanks,
    Angela Shi
    TechNet Community Support

  • Outlook 2003 Client connections fail after a while, requiring reboot

    I have Windows 2003 Server terminal servers in several sites, with Outlook 2003 as email clients.  Server is Exchange 2010, located in my main site.  The remote site terminal servers are connected through WAN links that are 5 Mbps connections,
    with generally very low usage compared to capacity.
    Outlook works properly for 2 - 3 days for the remote site users, but then, their connections start to drop, and they see "Outlook is trying to connect the the exchange server ..." systray messages, and they lose their email.  Can't see their
    inbox contents,  though sometimes the tree gets populated.  The only fix is to reboot the terminal server. 
    Similar terminal servers at the main site do not experience this.
    The backstory is that I recently migrated users from Exchange2003 to Exchange2010.  On exchange 2003 we never had this problem.
    What is going on here?

    Hi,
    From your description, I would like to clarify the following things:
    1. Make sure that these problematic users use Microsoft Office Outlook 2003 Service Pack 2 or later version.
    2. The default Exchange Server 2010 RTM configuration requires RPC encryption. However, Microsoft Office Outlook 2003 does not use RPC encryption by default. You need to update an existing Outlook 2003 profile manually so that it uses RPC encryption with
    Exchange 2010.
    For more information about it, here is a helpful KB for your reference.
    Outlook connection issues with Exchange 2010 mailboxes because of the RPC encryption requirement
    https://support.microsoft.com/kb/2006508?wa=wsignin1.0
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Exchange 2013 CAS functionality in coexistence with Exchange 2010 CAS

    Hi,
    I am planning to migrate Exchange 2010 to Exchange 2013 for 15000 users. We have a pool of 6 CAS 2010 servers added in a single CAS array. So my question is if we introduce a new CAS 2013 server in same site then will it affect CAS traffic anyway ? If we
    point our HLB to all CAS servers including CAS 2010 and CAS 2013 so will the CAS 2010 servers wil take traffic or is it only CAS 2013 servers who will take traffic. We will be putting same URLs in CAS 2013 same as CAS 2010. I have read lot of MS articles and
    all say that CAS 2013 should be enabled for CAS traffic and it will proxy request to CAS 2010. But I am not sure if we will face any CAS traffic issue whenever we will introduce CAS 2013 servers in same site and traffic will be pointed to CAS 2010 and CAS
    2013 both. Is it possible to add CAS 2013 in Exchange 2010 CAS array ? Please guide. Thanks in advance.

    For mailbox that exist on Exchange 2010, EXCH2013 CAS will proxy the request to an Exchange 2010 Client Access servers that exists within the mailbox’s local site.
    For mailboxes that exist on Exchange 2013, EXCH2013 CAS will proxy the request to the Exchange 2013 Mailbox server that is hosting the active copy of the user’s mailbox which will generate the Autodiscover response.
    -->Is it possible to add CAS 2013 in Exchange 2010 CAS array ? 
    No. CAS Array is no longer exits in Exchange 2013. But concept of a single namespace for Outlook connectivity remains. Please check this and this. In
    your case you dont need to worry as you have a HLB in place it will do the job
    When a new exchange2013 is deployed Outlook Anywhere has been enabled on all Client Access servers within the infrastructure and the mail.contoso.com and autodiscover.contoso.com namespaces have been moved to resolve to Exchange 2013 Client Access server
    infrastructure. In your case it is pointed to both as you have a load balancer in place but the same URL should be configured in exch2013
    Make sure you have exchange2010-SP3  minimum as it is the prerequisite requirement for upgarding EXCh2010 to 2013. 
    Please check the exchange server deployment assistant
    tool for moving mailboxes
    After moving a mailbox check the URLs. Configure autodiscover,EWS,OAB URLs on exchange2013. Please check this as
    well for checking URLs.
    I hope you know MAPI/RPC (RPC over TCP) traffic is now replaced with RPC over HTTP/s instead in exch2013. 
    Thanks
    MAS
    Please don't forget to mark an answer if it answers your question or mark as helpful if it helps

  • Exchange management tools error "reboot from a previous installation pending"

    I am trying to install the Exchange 2010 Management Tools onto a client. We have Exchange 2010 running already elsewhere, but have been doing RDP to the server in order to add mailboxes, etc., need to have more administrators on their own Windows 7 client
    computers doing remote management.
    Windows 7 Enterprise (64bit) client computer in same domain as Exchange servers, UAC disabled, logged in as a domain administrator. Fresh restart. No updates pending. Noticed article
    http://technet.microsoft.com/en-us/library/cc164360(v=exchg.80).aspx "A Restart from a Previous Installation is Pending" and numerous posts that indicated I should
    clear "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Updates\UpdateExeVolatile" or clear "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\PendingFileRenameOperations" - but neither of these keys
    exist on my computer!
    Downloaded and unzipped Exchange2010-SP3-x64.exe to C:\Temp
    Ran C:\Temp\setup.exe
    Checked off the options:  a) Error Reporting - Yes (Recommended). b) Custom Exchange Server Installation. c) Select "Management Tools". d) LEAVE UNSELECTED "Automatically install Windows Server roles and features required for Exchange". 
    Get the following errors
    Summary: 3 item(s). 1 succeeded, 2 failed.
    Elapsed time: 00:00:22
    Configuring Prerequisites
    Completed
    Elapsed Time: 00:00:01
    Management Tools Prerequisites
    Failed
    Error:
    A reboot from a previous installation is pending. Please restart the system and rerun setup.
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
    Warning:
    Setup cannot contact the primary DNS server (172.17.253.51) using TCP port 53. Check that the IP address of the DNS server is correct and that the DNS server is reachable.
    Elapsed Time: 00:00:17
    Languages Prerequisites
    Failed
    Error:
    A reboot from a previous installation is pending. Please restart the system and rerun setup.
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
    Warning:
    Setup cannot contact the primary DNS server (172.17.253.51) using TCP port 53. Check that the IP address of the DNS server is correct and that the DNS server is reachable.
    Elapsed Time: 00:00:03
    Already have reviewed many articles on this topic, none seem to apply to my situation. I am going crazy trying to solve it.

    As I've said this workstation meets the requirements for installation of the Management Tools. It is 64bit.
    Thanks for the link to the exchangeserverpro.com installation instructions blog. It is something I had already reviewed. There are many comments with problems, so many in fact it is confusing what finally worked for people who ran into snags.
    Many also reported the "reboot from a previous installation is pending" problem (that I am getting), but their solution to that problem is not obvious, since, as I originally posted, the Microsoft answer to that error message is contained in "http://technet.microsoft.com/en-us/library/cc164360(v=exchg.80).aspx"
    and the registry keys do not exist on my Win7 client. The other solution in the comments seemed to be to exclude the "Automatically install Windows Server roles and features required for Exchange" during install (but so far Ed and Rajith want
    me to include that option). The blog is quite old, and so I hoped the SP3 for Exchange 2010 would have fixed the installer issues identified in the comments on that blog... but apparently not!
    DNS is working in our environment. The IP address in the error message points to a network load balancer (NetScaler by Citrix) and does not respond on telnet using port 53... It is our standard DHCP-provided configuration for client DNS. (Does the
    Exchange installer for Management Tools have some unique DNS requirements beyond normal name resolution? If so, does the Exchange admin need DNS admin rights?) Just to remove the load balancer from the equation, I changed my Win7 client network adapter settings
    to use two real, physical actual Microsoft AD domain controllers to resolve DNS. I performed an IPCONFIG /FLUSHDNS. Then re-ran the Exchange 2010 installer. The specific error for DNS has gone away now that I am not using our enterprise's standard load balancer
    DNS client configuation. I really need to know why this is an Exchange management tools requirement. Any ideas?
    But still no-go on getting the Exchange 2010 Management Tools to install. Here are the latest errors on the Readiness Checks:
    Summary: 3 item(s). 0 succeeded, 3 failed.
    Elapsed time: 00:00:25
    Configuring Prerequisites
    Failed
    Error:
    The following error was generated when "$error.Clear();
              if($RoleInstallWindowsComponents)
                # Install any Windows Roles or Features required for the Management Tools role
                if ($RoleIsWindows8OrHigher)
                  if($RoleADToolsNeeded)
                    $ADToolsNeeded = 1
                  else
                    $ADToolsNeeded = 0
                  Invoke-Expression " Powershell -Command {& $RoleBinPath\InstallWindowsComponent.ps1 -ShortNameForRole AdminTools -ADToolsNeeded $ADToolsNeeded} "
                else
                  Install-WindowsComponent -ShortNameForRole "AdminTools" -ADToolsNeeded $RoleADToolsNeeded
            " was run: "The system cannot find the file specified".
    The system cannot find the file specified
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex88D115&l=0&cl=cp
    Elapsed Time: 00:00:01
    Management Tools Prerequisites
    Failed
    Error:
    A reboot from a previous installation is pending. Please restart the system and rerun setup.
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
    Elapsed Time: 00:00:20
    Languages Prerequisites
    Failed
    Error:
    A reboot from a previous installation is pending. Please restart the system and rerun setup.
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
    Elapsed Time: 00:00:03
    If I remove the "Automatically install Windows Server roles and features required for Exchange" on the installer, I do not get the PowerShell error, just the "installation is pending" errors:
    Summary: 3 item(s). 1 succeeded, 2 failed.
    Elapsed time: 00:00:39
    Configuring Prerequisites
    Completed
    Elapsed Time: 00:00:00
    Management Tools Prerequisites
    Failed
    Error:
    A reboot from a previous installation is pending. Please restart the system and rerun setup.
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
    Elapsed Time: 00:00:12
    Languages Prerequisites
    Failed
    Error:
    A reboot from a previous installation is pending. Please restart the system and rerun setup.
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
    Elapsed Time: 00:00:02
    Which puts me right back to where I started in this thread. 

  • Exchange2010 SP2 to SP3 upgrade fails

    Received the following error when attempting to upgrade to SP3 from SP2. FYI- All pre-requisites checks passed and Schema Prep completed with no errors.
    Error:
    The following error was generated when "$error.Clear();
                    initialize-ExchangeUniversalGroups -DomainController $RoleDomainController -ActiveDirectorySplitPermissions $RoleActiveDirectorySplitPermissions
    " was run: "The well-known object entry with the GUID "70bf766e-de1c-4776-b193-758d1306c8fb", which is on the "CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=xxxxx,DC=xxx" container object's otherWellKnownObjects
    attribute, refers to a group "CN=Exchange All Hosted Organizations,OU=Microsoft Exchange Security Groups,DC=xxxxx,DC=xxx" of the wrong group type. Either delete the well-known object entry, or promote the target object to "Global, SecurityEnabled".".
    The well-known object entry with the GUID "70bf766e-de1c-4776-b193-758d1306c8fb", which is on the "CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=xxxxx,DC=xxx" container object's otherWellKnownObjects attribute, refers to a
    group "CN=Exchange All Hosted Organizations,OU=Microsoft Exchange Security Groups,DC=xxxxx,DC=xxx" of the wrong group type. Either delete the well-known object entry, or promote the target object to "Global, SecurityEnabled".
    Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex88D115&l=0&cl=cp
    Elapsed Time: 00:00:23
    Any help is greatly appreciated.
    Mike

    Hello,
    From your description,
    the problem is caused by wrong group type, so I agree with Martina’s suggestion to check your group type.
    Hope it is helpful.
    Thanks,
    Amy

  • Remote Exchange Management Console "W3SVC isn't running on any Exhange servers in site" and always shows older version after SP2 or SP3 installed

    I'm trying to use EMC on a computer to remotely manage Exchange 2010 without having to do from the actual Exchange servers.
    First off, upgrading, uninstalling or installing EMC always fails on "Stopping" services. Seams to be a pretty common problem, but no clear fix other than deleting the registry entry (HKLM\SOFTWARE\Microsoft\ExchangeServer) and the
    "C:\Program Files\Microsoft\Exchange Server" folder. I'm guessing this is a bug since there should not be any Exchange services that need to be stopped on a computer where I'm just trying to use the EMC tool to manage Exchange.
    Next, is where when I open EMC I get "The World Wide Web Publishing Service (W3SVC) isn't running on any Exchange servers in the site. If you want to connect to Remote PowerShell, this service must be running. Make sure that the W3SVC is running on
    at least one Exchange server." From all the reading I am pretty sure that this is due to the Exchange servers being on one version and EMC I'm trying to use is another version.
    This is the version our Exchange Servers are on:
    ProductVersion   FileVersion      FileName
    14.02.0375.000   14.02.0375.000   C:\Program Files\Microsoft\Exchange Server\V14\bin\ExSetup.exe
    Which finally brings me to the part where no matter what SP I install to run EMC it always shows:
    ProductVersion   FileVersion      FileName
    14.01.0218.015   14.01.0218.015   C:\Program Files\Microsoft\Exchange Server\V14\bin\ExSetup.exe
    I've tried SP2, and even SP3 hopeing that an even newer version would let me connect to Exchange, but no matter what it always shows the 14.01 version above.
    I've also tried installing "Exchange2010-KB2874216-x64-en" which should be the same version we are on (Update Rollup 7 for Exchange Server 2010 Service Pack 2), but get a Windows Installer Error stating, "The upgrade patch cannot be installed
    by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program." This Error probably makes sense if no matter what I do I'm stuck with a version prior to SP2. 
    Any ideas?

    Hi,
    From your description, I would like to clarify the following things:
    1. Make sure the World Wide Web Publishing Service is running in Exchange server.
    2. Ensure that the account you use to open EMC is a member of Organization Management role group.
    3. Based on my knowledge, the error "The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program." occurs if you install
    the RU for a different SP. Please re-download the Service Pack 2 and install it on the remote computer since it hasn't been installed successfully from the above information.
    What's more, here is a similar thread for your reference.
    Unable to install Update Rollup 4 for Exchange Server 2010 Service Pack 2
    https://social.technet.microsoft.com/Forums/exchange/en-US/677c21ed-e125-41c1-a468-c268e1f21f8e/unable-to-install-update-rollup-4-for-exchange-server-2010-service-pack-2?forum=exchange2010
    Hope this can be helpful to you.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Amy Wang
    TechNet Community Support

Maybe you are looking for

  • How to use filters on ios mobile devices (iPhone/iPad) using GPU rendering (Solved)

    Many moons ago I asked a question here on the forums about how to use filters (specifically a glow filter) on a mobile devices (specifically the iPhone) when using GPU rendering and high resolution. At the time, there was no answer... filters were un

  • Getting Error in Viewing Report..Please help

    Post Author: gauravitech CA Forum: JAVA Hi All,   I am new to Crystal Report world.. I am trying to integrate Crystal Report with FileNet. FileNet has its own API to call webservices for Crystal report which bring reports back to the web application.

  • Different Pricing date for two line items

    Hi guru's How to give different pricing dates for two line items in a sales order To elaborate I have two line items one i need pricing date order date second one i need pricing date should be delivery date Thanks in advance Srinivas

  • Suppress PRINT ACKNOWLEDGE browser page.

    Hi, I am able to direct print the reports on web using normal parameters...i.e. desname, destype and desformat. When it prints successfully, it gives us a message in a separate browser window "The report has been successfully printed out" And we don'

  • Problems with the CS5.5 Design Premium Suite on OSX Lion?

    Hi, did anybody had already problems with the CS5.5 Design Premium Suite on OSX Lion? I purchased the software as a Volume licenced product recently and everything was working fine, until since few days my Indesign and Illustrator keep crashing on la