MIGGUI not transferring data

I am migrating from a Netware 6.5 SP8 server to SLES11 / OES11
Both servers are now up and running, certificates checked and valid.
I run the miggui UI and can setup the netware server as source, and the SLES11 as destination. I can add a consolidate task and browse both file structures (both NSS). I drag the folders I want to migrate accross, choose a few basic settings and start the job
I get to stage 3, Starting MIgrate Phase. When I look at the log, I can see the miggui has correctly worked out the size of the voiume for progress feedback..
Then nothing.. none of the files copy.
I have rebooted servers, recreates jobs, checked new server has a full replicate of the entire OU with the volumes in it, I just cant get the data to move.
Can someone advise on what I can do to push this through OR recommend another tool for migrating data from Netware OES to SLES11 OES
Thanks

Originally Posted by leecymj
I am migrating from a Netware 6.5 SP8 server to SLES11 / OES11
Both servers are now up and running, certificates checked and valid.
I run the miggui UI and can setup the netware server as source, and the SLES11 as destination. I can add a consolidate task and browse both file structures (both NSS). I drag the folders I want to migrate accross, choose a few basic settings and start the job
I get to stage 3, Starting MIgrate Phase. When I look at the log, I can see the miggui has correctly worked out the size of the voiume for progress feedback..
Then nothing.. none of the files copy.
I have rebooted servers, recreates jobs, checked new server has a full replicate of the entire OU with the volumes in it, I just cant get the data to move.
Can someone advise on what I can do to push this through OR recommend another tool for migrating data from Netware OES to SLES11 OES
Thanks
There are also debug logs in the same directory that you obtained the miggui logs. They usually show more information.

Similar Messages

  • Hot Sycn not transferring data

    My Palm Z22 was working fine.  All of a sudden it quit transferring data between desktop and palm.  I have removed my palm program a couple of times and tried reinstalling from both the install disk and the download.  I have read every trouble shooting page I could find.  I am very frustrated, as I cannot seem to find a solution.  I can add data on both the desktop and the palm, but I cannot transfer.  As a result, my desktop is blank from mulitple remove and installs, and my palm has all of the information.  Please help.
    Post relates to: Palm Z22

    This is my log.  It says everthing has been done sucessfully.  I have the hot sync icon.  I just can't get the info to transfer.  Grr!
    HotSync session completed successfully on 05/05/09 12:28:38
     HotSync session started on 05/05/09 12:28:24, and completed in 14.0 seconds
     Expense synchronized successfully
     Duration: 0.1 seconds
     Quick Install synchronized successfully
     Duration: 0.0 seconds
     Memos synchronized successfully
     Duration: 0.3 seconds
     Tasks synchronized successfully
     Duration: 0.2 seconds
     Contacts synchronized successfully
     Duration: 0.2 seconds
     Calendar synchronized successfully
     Duration: 0.5 seconds
     Note Pad synchronized successfully
     Duration: 0.1 seconds
     Backed up all files successfully to deanosier's Backup folder
     Duration: 4.5 seconds
     Backed up 2 file(s) successfully
     ePInventory
     Saved Preferences
     HotSync session completed successfully on 05/05/09 12:27:12
     HotSync session started on 05/05/09 12:26:43, and completed in 29.0 seconds
     Expense synchronized successfully
     Duration: 0.2 seconds
     Quick Install synchronized successfully
     Duration: 0.0 seconds
     Memos synchronized successfully
     Duration: 0.2 seconds
     Tasks synchronized successfully
     Duration: 0.2 seconds
     Contacts synchronized successfully
     Duration: 0.2 seconds
     Calendar synchronized successfully
     Duration: 0.3 seconds
     Note Pad synchronized successfully
     Duration: 0.3 seconds
     Backed up all files successfully to deanosier's Backup folder
     Duration: 8.1 seconds
     Backed up 5 file(s) successfully
     ADD051VData
     ePInventory
     psysLaunchDB
     Saved Preferences
     Queries

  • Made the mistake of not transferring data from my old iphone 3 prior to activating new phone.  I didn't have icloud, etc.  Got contacts, but nothing else.  What r my options?

    Help

    If you did not backup your "data" then you have no options.
    You have to have the data in order to move the data.

  • @XREF not transferring data

    I am trying to transfer data from source to target where target has the following dims:Time (dense),version (dense),Year (dense),Product (sparse) and Hierarchy (sparse)the source: Time (dense),Measures (dense),version (dense), Year (dense), Product (sparse) and Hierarchy (sparse)the dimensions are the same except for the Measures dim which appears in source and not target. My calc command is:"Total Assets" = @XREF(FundsProfitdb,"Total Assets","Funds Profit");where Funds Profit is the measure in the source db. I get no values on the target db after running this. Any ideas?

    I assume the Total Assets member in the target is part of a dense dimension - if it is, the issue could be block creation related.If the target database starts out empty, this calculation will not create blocks for you. Depending on what you are trying to transfer, there are a couple of solutions:1) Use the @XREF calculation after you load the target cube with some initial values. This will create blocks which the calculation can then populate with some values from the source2) Re-arrange the formula to place a sparse dimension member on the left hand side of the formula. This approach may not be practical, based on your database config. Option 1) is preferrable.Also, make sure you are not having any Intelligent Calc issues in the calc by using the SET UPDATECALC OFF command before @XREF.Regards,Jade--------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]

  • Help mac not transferring data

    I just got my new macbook pro and everytime i try to transfer anything to a USB flash drive the file shows up on my macbook but doesnt show up on other computers. then if i try to erase the file on the macbook it erases it but the amount of memory on the usb drive does not change. Can anyone help me ?

    Welcome to Apple Discussions
    Most USB Flash drives come pre-formatted for Windows not Mac, have you erased it and formatted it with Disc Utility before doing this ?
    This article might be helpful: http://www.macworld.com/article/140716/2009/05/formatflashdrive.html

  • 0EC_PCA_3 does not return data in RSA3 if the target system is entered

    Hello all,
    Datasource 0EC_PCA_3 is not transferring data to the BW 7.0 system. In the ECC 6.0 system datasource 0EC_PCA_3 does not return data in RSA3 if the target system (BWDCLNT100) is entered in the selection fields. When omitting the target system all expected data is returned.
    Datasource 0EC_PCA_1 works fine for the same target system.
    There is one thread dealing with the same problem but the person does not provide the solution he found.
    Does anyone know what the issue is?
    Regards and thanks,
    József.

    The problem was solved by removing the datasource in both BW and R/3 and activating everything from scratch again. We didn't find out what was the cause of the problem, but at least it is working now.

  • 've Password job a year ago to Mobil iPhone 4, and now lost and I can not wipe data from the device or transferred to the new device .. What do I do?

    've Password job a year ago to Mobil iPhone 4, and now lost and I can not wipe data from the device or transferred to the new device .. What do I do?

    iPhones require a SIM for activation.
    Put the device in DFU mode (google it) and restore via iTunes.

  • Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred

    Hi All,
    I have done a BADI implementation for ME_PROCESS_PO_CUST and when I try to convert a PR to PO using ME59N in ECC u2013 AFS System I am getting below error message.
    Data from Business Add-In ME_PROCESS_PO_CUST not transferred.
    I am trying to populate certain PO fields ( ekko and ekpo ) from PR fields. But the above error occurs when I update the Ex Factory Date manual that is EKPO-J_3AEXFCM.
    I am updating this in the method PROCESS_ITEM and what I found while debugging is in the class CL_PO_HEADER_HANDLE_MM, in the implementation of IF_FLUSH_TRANSPORT_MM~START, the contents of field u2018my_iteration_countu2019 keeps increasing and becomes 10 and raises this error.
    I read few of the related questions raised by others in this forum and understood that this can happen if I try to change the field that is disabled ( greyed) in ME22N. But this field that I am talking about is enabled.
    I also tried to move my code of populating the field EKPO-J_3AEXFCM from the PROCESS_ITEM to the enhancement point just above the user exit EXIT_SAPMMO6E_018 but still it doesnu2019t resolve the error.
    (We donu2019t want to use User Exit and hence we are trying with BADIs or enhancement point.)
    Can anyone please help me with this. I also found an OSS note 1334046 but not sure if that can resolve my issue.
    Thanks in advance.
    Ameesha.

    Hi Ameesha,
    i think u need to implement the BADI ME_PROCESS_PO_CUST in SPRO settings.
    SPRO>Purchasing>Business Add-in Purchasing-->BAdI: Enhance Processing of Enjoy Purchase Order
    try this once.
    All check this link.
    [Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred;
    Hope it helps.
    Regards,
    Raj

  • HT201269 while transferring data from iphone 3GS to iphone 4S SMS details are not getting transferred.

    While transferring data from old iphone 3gs to new iphone4s through itunes the data in messages is not getting transferred.

    @ melfromvictoria
    Have you tried right clicking on the 4s and select "restore from back up"

  • Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5  and it will not open on the iMac the only change is the my new iPhone number is  OS.  Any ideas?

    Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5  and it will not open on the iMac the only change is the new Maverick OS from the macpro Lion OS.  Any ideas?
    <Personal Information Edited by Host>

    Setup Assistant and Migration Assistant do not restore MS Windows, it only does the OS X partition. All of your Windows stuff must be backed up and restore using a MS Windows application. If no one on this forum is able to answer your question then I'd repost it on a Parallels forum to see how other Windows users approach this.

  • Idoc data passed OK but not transferred

    Hi all
    I have to SAP clients connected via ALE for Payroll Posting (between HR client and FI client). When the HR use post the payroll, the last status of Idoc is 03 - Data passed to port OK  (WE05). Somehow there is no created FI document in FI client. I check BDM2 tcode and seeing that the 3 Idoc Not transferred yet in HR client.
    How can I make this Idoc transferred automatically after the posting? ( The Output Mode is already 2 = Transfer Idoc immediately).
    Thanks!

    Thanks Juan,
    It did appear in SM21, the ALE user lack of authorization to post. I have corrected it. Some posting works fine. But some others, get error message "Required GL Account was not transferred in parameter Account GL".
    From technical perspective, do you have any ideas why? According to functional team, they have config. whats needed...
    Thanks!

  • Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode

    Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode
    Hello, I am having problems migrating data from my old PC running XP (SP3) to my new Mac Pro 2012 using the Migration Assistant.
    - I downloaded and installed the Windows Migration Assistant from Apple
    - My Mac recognized PC and displays passcode
    - The sasscode does not show / display on my PC
    - My Mac is then stuck in "authenticating" loop and the PC is stuck "waiting for Mac to connect."
    - Both computers are connected on same network (have connected PC on WIFI and using ethernet to Reuter)
    I have looked on support site and only response I saw says to reinstall Windows Migration Assistant (which I have done)
    Any ideas?  If cant get this to workare there instructions for manually bring across relevant data eg itunes music and apps, photos, picasa data etc?

    Why not turn off the Windows firewall and uninstall any other firewall software you have installed?
    If you are using a Norton product uninstall it and discard it. To fully unistall most Norton products you have to go to the Norton website and download a soecial program to completely get rid of it. The normal uninstall feature built into the program will not remove all of it.

  • HT1386 Dear Sir / Madam.                              I have iphone 3 & 4. 1247 contacts is in iphone 4. When I synsing contacts not transfering. But other data is transferred.  How can I transfer the contacts to iphone 3. Thank you. Dr.Jegamohan.

    Dear Sir / Madam.
                                 I have iphone 3 & 4. 1247 contacts is in iphone 4. When I synsing contacts are  not transfering. But other data is transferred.
    How can I transfer the contacts to iphone 3.
    Thank you.
    Dr.Jegamohan.

    You are syncing contacts or trying to sync contacts how - direct with a supported address book app on your computer via the iTunes sync process, which is selected under the Info tab for the iPhone sync preferences with iTunes?

  • Migration from PC with MA did not end. Had to shut down MacBookPro. After restart no new user was created. Can't find the transferred data (35 GB). Would like to delete it.

    Migration from PC with MA did not end. Had to shut down MacBookPro. After restart no new user was created. Can't find the transferred data (35 GB). Would like to delete it.

    iTunes is required to initially activate the phone. Back when the iPhone 3G was sold, you would take it out of the box and see a "Connect to iTunes" screen. She HAD to connect to a computer in order to begin using the phone. Does she remember what computer this was?

  • The actual date is not transferred from the (PS) milestone

    Hello ,
    In an order with header billing plan dates that are value-based, the actual date is not transferred from the Project System (PS) milestone, even though the actual date of the assigned milestone was changed via transaction CJ20N.
    We are repeatedly facing this error , I have applied Note number 1395078 but still once in a while I am still facing the issue
    Regards
    Muralidharan.S

    Check the following path in SPRO
    IMG - PS - Revenue & earning - planned revenues - Automatic Plan Revenue cal - Maintain Billing Plan Settings
    There, you use the billing plan to plan dates on a WBS element whose payment requests or invoices relevant to sales are to be sent to customers.
    The system updates the planned revenue and planned payment receipts to the relevant WBS element. The planned revenue is updated using the revenue element stored in the planning profile for the work breakdown structure and using the financial item assigned to the revenue element.
    You make the settings given below for the billing plan. To do this, you carry out the following steps:
    - Maintain billing plan type
    - Maintain date description for billing plan
    - Maintain revenue element for billing plan
    - Assign billing plan type to project profile
    Hope this can assist you.
    Thanks & Regards
    JP

Maybe you are looking for