Might be a dumb question but.......

I bought a Q10 yesterday.  It's cool, so far, BUT, in upgrading, my carrier, who shall remain nameless, required I switch to a different data plan because the one I had (unlimited text, data, everything) was being phased out.  In lieu of that, I thought, no problem, I can utilize the wi0fi feature when I'm home to save on using up too much data.  That seems like a fine plan but I can't seem to get it to work.  When I go in to connect to the internet, it connects but then it seems to be sidablilng on it's own?  Is there a security setting or something I'm missing??  It would make sense to me that I should have to go in and disable the Network Settings to use wi-fi but I just don't know, now.
And are there limitations on using wi-fi, such as access to social network sites, etc?  Any guidance is appreciated.
Thanks,
Debbie
An Admitted-Tech **bleep**

Have you connected to your home wifi network on your Q10, i.e. on settings go to Network connections select wifi and when you see your wifi connect to it.
I have multiple wifi connections setup on mine, home, work, various coffee shops, cloud wifi etc and everytime I come in range of one of those it autimatically uses that for data rather than the mobilr network which only uses if I'm not near one of those.

Similar Messages

  • Might be a dumb question, but I am moving from 1st gen to iPadair; on Safari, 1st gen to delete apps/sites just visited, you could double tap home key and apps would appear on bottom and one could delete from there. How does it work on ipadair?

    This may be a dumb question, but nonetheless, here goes:
    I just moved from 1st gen ipad to new ipad-air. Great and happy! But, one thing I can't figure out how to do is to delete the pages/sites/apps that I have just used? For example, on the 1st gen. you could double-tap home button and past actions would come up on bottom of screen. I could then delete them one by one, to keep things cleaned up. Am I missing something here? Does it keep a log irregardless? Not the same as deleting history - at least didnt' work for me.

    Close apps and not delete apps.
    1. Double tap the home button to bring up the multi-tasking view
    2. Swipe the app's windows upwards to close
    3. The app will fly off the screen

  • This might be a dumb question but i need to know?

    i have the new ipad 3rd gen 64g retina display and my question is does it hurt the ipad display if you take a picture of it with a cameras flash.does the cameras flash damage a ipad screen in any way?
    thanks everyone its been bugging me to know and im curios about it any answers would be great.

    No.

  • Although this might be a dumb question but....why ...

    called shazam aren't free like on the apps store for iphone..for nokia it's free BUT only for 30 days!=(...iphone is forever i think(but i don't care about iphone) please please make it free forever for nokia devices cause that app is awesome=D

    Shazam is a 3rd party application. You need to ask Shazam why they are charging Nokia users and not iPhone users.

  • Might be a dumb question, but I'll ask anyway.

    I just changed my ISP and would like to change my email address on my iTunes account. How would I go about doing that?
    Thanks for your help.
    If this post belongs elsewhere, please feel free to move it.

    When you sign in to the itunes store there is box called view account and you can edit your information there, hope that answered what you are looking for.

  • Hi! This might be a stupid question, but I just bought an IPod G5 60 GB. When you firstconnect your IPod you have to setup your ID. I'm using my brothers computer, who has an IPod too, so now I'm wondering when I set up my ID with his Itunes does his Ip

    Hi!
    This might be a stupid question, but I just bought an IPod G5 60 GB. When you firstconnect your IPod you have to setup your ID. I'm using my brothers computer, who has an IPod too, so now I'm wondering when I set up my ID with his Itunes does his Ipod still work with it??? Or would his ITunes just see my IPod? Or does his Ipod ID change to my ID?
    Or does it work without any problems, to setup two IDs on the same computer??
    Thanks!

    Hi!
    This might be a stupid question, but I just bought an IPod G5 60 GB. When you firstconnect your IPod you have to setup your ID. I'm using my brothers computer, who has an IPod too, so now I'm wondering when I set up my ID with his Itunes does his Ipod still work with it??? Or would his ITunes just see my IPod? Or does his Ipod ID change to my ID?
    Or does it work without any problems, to setup two IDs on the same computer??
    Thanks!

  • My ipad mail is synced to my iMac mail account. On iPad, I can only see my inbox and sent messages. I can't see any of the folders I have created on my iMac. How do I do that? Probably a dumb question, but I know there's a lot of smart people out there!

    My iPad mail is synced to my private email account, which I organise on my iMac. On iPad, I can only see inbox and sent messages folders, not any of the other folders in my email account I have created on my iMac. How do I get iPad to show my other folders? Probably a dumb question, but I know there's a lot of smart people out there.

    If you select a mailbox, you should get an Edit button (easier to see in landscape mode). Clicking the button will provide you with check circles for the messages. You also get Delete and Move buttons at the bottom. Check the messages you want to move and then navigate to the mailbox you want to drop them into. I think as long as you can navigate to a mailbox you can move the messages to it.
    In the Mac Mail application and probably Outlook on the Windows side, you also setup rules to move messages to specific mailboxes. If the mailboxes are stored on the server, then you can have the sorting done on the server and they should appear that way on the iPad. If your later messages do not show up, you may need to have the iPad app pulled down more messages until they are all showing.

  • Where do i find the reference number for my preorder? and yes i no this is prob a dumb question but i cant find it anywhere......

    Where do i find the reference number for my preorder? and yes i no this is prob a dumb question but i cant find it anywhere......

        Hi droidboy52999,
    Your email won't have the same confirmation number as it was ordered over the phone. You will need the last name used for the order, the location code (this ends in 01) and an order number (five to six digit number). Please keep us posted if you need further assistance with this.
    Thank you,
    MariaC_VZW
    Please follow us on Twitter @VZWSupport

  • This is probably a dumb question, but I can't find an answer. How do I make the text on my calendar larger so I can actually read it when I print it out?

    This is probably a dumb question, but I can't find an answer. How do I make the text on my calendar larger so I can actually read it when I print it out? I am using a MacBook.

    Press "Command P" and when the Print dialogue box comes up, towards the bottom there is an option allowing you to choose the text size, i.e: small, med, large.
    Hope this helps,
    NEIL

  • Dumb question but How do you know what generation iPad you have?

    Dumb question but how do you know what generation iPad you have?  I got mine as a gift on Xmas day 2012 but don't know how to find out what version/generation it is.  Can someone help me find that info?  I have looked within settings & elsewhere and I cannot find it.  Thanks in advance!

    Append the last three characters of its serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
    (83797)

  • Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

    Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.

    Hi Winterwilly,
    Welcome to Apple Support Communities. 
    The article linked below answers your question of how to use QuickTime to record something on your MacBook Pro’s screen.
    QuickTime Player 10.x: Record your computer’s screen
    Cheers,
    -Jason

  • This maybe a dumb question but...If I buy Aperture are the updates already installed into the purchased version or do I need to update them?

    This maybe a dumb question but...If I buy Aperture are the updates already installed into the purchased version or do I need to update them after the prograam is installed?

    Should come updated from the Mac App Store. Obviously, it's tough to keep things up to date when they are sitting in a box on a store shelf.

  • HT4437 this may seem like a dumb question, but do you always have to have wifi on to play music using airplay through the tv

    This may seem like a dumb question, but once you have set up airplay from the ipad through the tv do you always need to have the internet on.

    It's not necessary to have an internet connection in order to AirPlay content to the Apple TV unless the content is protected. You will however need to keep your wifi network turned on.

  • Okay, a dumb question, but need to know -

    do I need to buy protection software like Norton or Malware Bytes for my mac?  I thought Mac's don't get hacked.

    No.
    It's not a dumb question at all. Most people come to this site after they mess up their Mac. Don't install that junk, and you won't be coming here when you need to fix the problems it causes.
    There will always be threats to your information security associated with using any Internet - connected communications tool:
    You can mitigate those threats by following commonsense practices
    Delegating that responsibility to software is an ineffective defense
    Assuming that any product will protect you from those threats is a hazardous attitude that is likely to result in neglecting point #1 above.
    OS X already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple.
    A much better question is "how should I protect my Mac":
    Never install any product that claims to "clean up", "speed up",  "optimize", "boost" or "accelerate" your Mac; to "wash" it, "tune" it, or to make it "shiny". Those claims are absurd.Such products are very aggressively marketed. They are all scams.
    Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources.
    Illegally obtained software is almost certain to contain malware.
    "Questionable sources" include but are not limited to spontaneously appearing web pages or popups, download hosting sites such as C net dot com, Softonic dot com, Soft pedia dot com, Download dot com, Mac Update dot com, or any other site whose revenue is primarily derived from junk product advertisements.
    If you need to install software that isn't available from the Mac App Store, obtain it only from legitimate sources authorized by the software's developer.
    Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
    Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
    Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
    Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
    Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iCloud, iTunes, or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
    Don’t install browser extensions unless you understand their purpose:Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
    Don’t install Java unless you are certain that you need it:
    Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
    Java can be disabled in System Preferences.
    Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
    The same precaution applies to Adobe Flash Player. Newly discovered Flash vulnerabilities appear almost weekly.
    Beware spontaneous popups: Safari menu > Preferences > Security > check "Block popup windows".
    Popup windows are useful and required for some websites, but unsolicited popups are commonly used to deceive people into installing unwanted software they would never intentionally install.
    Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
    If you ever receive a popup window indicating that your Mac is infected with some ick or that you won some prize, it is 100% fraudulent. Ignore it.
    The same goes for a spontaneously appearing dialog insisting that you upgrade your video player right this instant. Such popups are frequently associated with sites that promise to deliver "free" movies or other copyrighted content that is not normally "free".
    The more insistent it is that you upgrade or install something, the more likely it is to be a scam. Close the window or tab and forget it.
    Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
    The most serious threat to your data security is phishing. Most of these attempts are pathetic and are easily recognized, but that hasn't stopped prominent public figures from recently succumbing to this age-old scam.
    OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
    Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
    If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
    Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
    Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
    Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

  • ISight System Requirements (dumb question, but I'm confused)

    Sorry to ask such a purchase-related question, but I'm entirely confused as to whether I can use iSight with my G4 Cube.
    I'm running OS 10.4.3 and have iChat AV installed, but my processor speed is only 500 MHz.
    The information on the actual iSight package is unclear. So, after I was disuaded from buying one at a retail store, I checked the site store. There, the system requirements read:
    "Macintosh computer with a 600MHz or faster PowerPC G3 or any PowerPC G4 or G5 processor."
    I understand this to mean that, for people with G3 PowerPCs, their processor speed must be at least 600 MHz. But any G4 or G5 processor should be adequate.
    However, when I called Apple Customer Service, the representative insisted that this means, no matter what processor you have, its speed must be at least 600 MHz.
    Can someone enlighten me?
    G4 Cube   Mac OS X (10.4.3)   500 MHz processor
    G4 Cube   Mac OS X (10.4.3)   500 MHz processor

     Hello Jason. Different software applications that drive iSight can have different System Requirements.
    There are a lot of choices of Applications You Can Use With iSight. Select the app that performs the function you want and then check its system requirements. Different applications have their own (and possibly different) requirements, so check carefully when considering other software.
    The 600 MHZ requirement is the G3 processor speed minimum System Requirements for iChat AV 2.1. This particular 600 MHz speed requirement applies only to G3 Macs using iChat AV 2.1. ANY G4, including your Cube, can use iSight with iChat AV 2.1.
    However, you are using iChat AV 3. Some of the System Requirements for iChat AV 3 are significantly higher than for version 2.1, but your G4 can still use iSight for one-to one iChat AV 3 video without PowerBoost.

Maybe you are looking for

  • OMF won't export out of final cut pro.

    Exporting a 93min 1920x1080 HD timeline to OMF 5 second handles tried 2 second handles as well. OMF won't export out of final cut pro. Get error message there is a 2 gb limit. Final cut 6.0.6 Have deadline. Didn't see it on any forum. Help!! Thanks!!

  • Month End Closing Procedure.

    Hi, Can some one send me month end closing activites carried out with  T Code to my mail id is [email protected] Points will awarded. Regards, Kiran.

  • Every File and Email has Same Date

    Hi I've seen other similar problems on here but not identical, and nobody seems to have resolved them successfully anyway ... All my emails, from different accounts, saved/inbox/stored on own computer/stored elsewhere have the same date, some insigni

  • Offline installation of SCCM 2012 r2 Client

    Hi, I have to install SCCM 2012 Clients on some VPN client machines VPN Connectivity is slow i have to install the cleints offline. for this I have copied ccmsetup.exe  file on local machines and run below Command to complete the installation.... cli

  • EBS R12 Oracle Diagnostics Tool

    Hi All, I'm trying to use Oracle Diagnostics Tool to know more about some errors I got while creating an account but it doesn't seem to be working. Does any of you know if there are problems with this tool? or if maybe the problem relies on the insta