Mighty Mouse and Rt Click??

I want to make the top button perform like a rt click (ie. Control click) How do I do this? I know how to get to the setup preferences for my mighty mouse but I can't seem to find this.

You might try SteerMouse. It has some nice features including that.

Similar Messages

Mighty mouse and right click???

I have a mighty mouse and the right is set to a primary button however it doesn't function like a right click. i still have to press control to get the right click functionality?? HELP!!

What is strange about my mighty mouse which also experiences similar issues is that you have to be careful where you are pushing it. My right tbutton is set as a control click but if I don't push it in the very upper right hand of the mighty mouse it behaves as a single click. The left hand button, as such, does not seem to be as sensitive to placement as the right hand one. For a long while I could not get it to work at all, until I figured out where I actually had to strike it.
I had never used a mighty mouse until I purchased a new iMac a couple of weeks ago and just figured it was "operator difficulty" as I am far more used to a trackball than a mouse. I may still go back to one if I can't get used to this mouse. I think you really have to put your whole hand over the mouse to make it function properly and I tend not to do that.
Does this help you with your issue? I am not sure, maybe there is some sort of difference in the way the mighty mouse works with new hardware?
Good Luck! Wish I had more to offer other than trying carefully to position your handin difernt places and see if that helps.
Message was edited by: Al Van Malsen

Wired Mighty Mouse and right click on my intel imac

Hi,
This is a stumper!
1) Wired mighty mouse stated to lose right click functions. Control click
works fine but right click with menus is gone.
2) Tried steer mouse. No change
3) Deleted hidmouse user prefs. No change.
4) System Archive and install. no change
5) Clean install and Account reinstall (by hand). no change
6) Nuke and Pave. no change
7.) Pram reset. no change
8) Mouse works on other Macbook- not a mouse problem.
9) Second Mighty mouse exhibits the same problem.
10) logging into second account. no change
11) Other 2 button mice work!
12) I like my mighty mouse, but I need right click!!
13) Tried Apple Dev hid driver debug . no change
14) Tried a bunch of other things but this has me stumped....
(and I'm Apple Certified) any other suggeestions or software
I can try? Context plugins are ok...but I'm not sure if there are other prefes to deleted? Also, a totally fresh install should have fixed this...what's going on here? I need to know.

What is strange about my mighty mouse which also experiences similar issues is that you have to be careful where you are pushing it. My right tbutton is set as a control click but if I don't push it in the very upper right hand of the mighty mouse it behaves as a single click. The left hand button, as such, does not seem to be as sensitive to placement as the right hand one. For a long while I could not get it to work at all, until I figured out where I actually had to strike it.
I had never used a mighty mouse until I purchased a new iMac a couple of weeks ago and just figured it was "operator difficulty" as I am far more used to a trackball than a mouse. I may still go back to one if I can't get used to this mouse. I think you really have to put your whole hand over the mouse to make it function properly and I tend not to do that.
Does this help you with your issue? I am not sure, maybe there is some sort of difference in the way the mighty mouse works with new hardware?
Good Luck! Wish I had more to offer other than trying carefully to position your handin difernt places and see if that helps.
Message was edited by: Al Van Malsen

Mighty Mouse and double clicking

Mouse is set to "double click", but, if I place the cursor over a file in my desktop and click the mouse, nothing happens.
Clicking on links in the browser works fine, but I have to hold down the "control" key in order to invoke the contextual menu and then select "open", in order execute an action that the mouse should do.
I am a new, iMac convert, and do not know if this behavior is normal.

Are you double clicking?
No.
Again, mouse is set to double click when I press on it, once.

Problem with Left Click (mighty mouse) and flash content

Hi, first sorry for my bad english...
Well I have an issue with the left click (i have mighty mouse) and flash content in Firefox:
if i'm using Firefox and then change to any other app, when i get back to firefox i have no left click anymore...
So i have to open the mouse setting panel and everything works fine again...
I don't want to open the mouse panel over and over again to fix that, so what i can do?
THANKS in advance =)
I uploaded a video to show the issue:
http://www.youtube.com/watch?v=ROWSod5fUjk
Mighty mouse Settings:
Left Click + Right Click
Firefox ver: 3.5.5
Snow Leopard: 10.6.2
iMac 24" (iMac9,1)
Message was edited by: MaLk Gopher

Hi, Guys!!
And you have some right cosmic_hippo , Why?
Well think that the real problem it's something between Firefox and Flash content...
because if i use Safari and i try make what i describe in the first post, i don't have any problem with the mouse settings.
Only Happens when i use Firefox...
Cheers.
Well the issue is still there...

TS3048 Right click on Mighty Mouse and Wireless Keyboard are not working

I have a 24" iMac, early 2009 Lion,10.7.5. My wireless keyboard and mighty mouse are not working properly. Wireless keyboard- I can turn it on and it will ask me to pair it with the Blue Tooth. I cannot log the numbers in - I even tried logging them in with my wired keyboard device (which is an Apple keyboard).
My Mighty Mouse's right click stopped working as well.
I have gone through all of the troubleshooting steps-
New Batteries - Cleared Blue tooth preferences list, repaired permissions, Cleared cache, Made sure that the settings were correct ex: key was not checked on mouse, Removed both devises (keyboard, and mouse) from blue tooth and allowed them to be discovered again, PRAM reset, Hardware check/ reset, and lastly, Reinstall of OSX.
I am still having the same issue with both devices.
Thank you.

This is why you should always have a wired keyboard and mouse as backups.
Try smc and hope for the best.
I'd also suggest pram reset but you need the keyboard for that.

Mighty Mouse Problems - right click and battery changing

So I am on my second Mighty Mouse after the first one completely stopped working one day. Took it in to Apple and they gave me a new one.
This new one generally works ok (although right click fails every few days) but when I change the batteries and turn it back on the computer doesn't find it. I have to plug in my old Logitch and discover the Mighty Mouse and pair it again using the Logitech to control the cursor.
Then this morning the Mighty Mouse left click button stopped working so I turned it off and on again and once again, the computer didnt recognise the mouse and I had to go through the whole discovering and pairing process again using my other mouse.
Any ideas - I have checked the Bluetooth preferences and cant seen anything that I should be checking - it says my mouse is paired, connected and discoverable.
Any ideas or are Mighty Mouses just an ordinary piece of hardware - my experience so far has been ordinary!
By the way - I have a new (December 07) 24inch iMac and 10.5.2

Hey,
I just talked to German Apple telephone support. They fixed the problem for me! With fresh installs of 10.7.5 the problem is that two files are missing that are needed for the mouse. In my case I could get them from another computer I own that ran Lion and did have the files. To get to the files you need do this:
Go to
/System/Library/LoginPlugins/BezelServices.loginPlugin
control-click that file and choose "show contents"
now in the finder window navigate to
Contents/PlugIns/
In this folder should be two files named
AppleBluetoothHIDMouse.plist
and
AppleHIDMouse.plist
If you don't find these files, you need to get them and put them in.

Mighty Mouse Wireless Right Click not working

Hi Friends!
I am having some difficulty getting my Right Click on my Wireless MM to work. I am aware that I need to keep my left finger off the mouse but it still does not seem to be working.
Any thoughts ?
Thanks !
J

Try replacing the battieries (or just taking them out and putting them back in). Forcing the connection between the Mighty Mouse and the iMac to break. Then put the new batteries, or the ones you were you using from before, in the MM.
Re-link the Mighty Mouse to the iMac and try applying the settings for the right click function in System Preferences.
Remember to mark as helpful or solved.
-benny

Mighty Mouse and Kensington Slimblade

My wife and I use a MBP and a MBA since SL we cannot get either mouse to behave. Connection is difficult and when connected behviour is erratic and right click on the MBA produces Expose! This appears to be fundamental.

I'll answer my own questions. I have both Mighty Mouse and Kensington's MouseWorks AND Microsoft Mouse all co-existing harmoniously.

Mighty Mouse and wireless keyboard stop working

Just got my iMac yesterday and everything worked out of the box. But once yesterday and once so far today, the wireless mighty mouse and keyboard stopped working.
Today I noticed after the mouse stopped moving the cursor, the little green light on the bottom of the mouse was blinking. I turned off the mouse and turned it back on, but the green light still blinked and the mouse still didn't work.
The only thing that did something was the power button on the iMac. I had to turn off the iMac and turn it back on. Then the keyboard and mouse worked again.
What's going on? Do I need to get the iMac repaired?

Hello and Welcome to Apple Discussions ...
Try deleting this file. com.apple.bluetooth.plist
/Users/YourName/Library/Preferences. Drag that file from the Preferences folder to the Trash, empty the Trash and reboot.
If that doesn't help, make sure the batteries are charged. Go to System Preferences/Keyboard&Mouse. Click the Bluetooth tab. Your battery levels are displayed there. When it gets down to one green bar on the left, install new batteries.
If none of the above helps, turn the mouse and keyboard off. Delete the mouse and keyboard from the System Preferences/Bluetooth devices window. Select the mouse in the window on the left, then click the minus - button. Now open the slider on the mouse so the green light blinks. Click + which will launch the Bluetooth Setup Assistant. Just follow the instructions. Same for the keyboard. If you still have issues with the wireless hardware, I'd take it back. You have 14 days in case you need to replace the iMac.
Carolyn

Mighty Mouse and Maya? How does it wok?

Does anyone have any experience with the Mighty Mouse and Maya? I'd like to know how it works with the right and middle clicks. Thanks!

Does your computer have built-in Bluetooth, or an external Bluetooth adapter? If not, there's your problem.

Mighty Mouse and Itunes

Is it possible to configure the mighty mouse and its side buttons to work with Itunes (i.e play/pause, skip tracks)?
I just got this mouse, so I'm trying to figure it out as I go.

The double-click speed needed to be reduced.

Apple Mouse (mighty mouse?) Right clicks too often

I have the Apple Mouse (former Mighty Mouse) and I have right click turned on. The mouse is constantly doing "right click" when I click left. I look and my finger is well to the left of the little scroll wheel.
I thought "Oh maybe it's sensing the whole panel and I'm pushing in a funny angle" but no, I paid attention and I was not.
I'm just wondering, is this a common problem with this mouse? Or is my particular mouse defective?

I have a 2011 iMac and the batteries in my Magic Mouse need changing every couple of months. In contrast, my wireless keyboard only needs a battery change every 10 months or so. I bought an Apple battery charger and keep the spare set of batteries always charged.
I think that is the way it is - mouse uses more juice than keyboard (or gets more use so runs down faster). However, if it gets worse than 2 weeks life, it may be time to invest in a new mouse.

Mighty Mouse and Wireless Keyboard with Final Cut Studio

Hello,
I'm looking into picking up the Mighty Mouse and the Wireless Keyboard, but I've noticed that the keyboard has some set backs.
It's missing the right side. This bothers me because I use the arrows very frequently to navigate through my timeline - they're very helpful for several reasons. Will I be able to assign keys on my wireless keyboard to do the same actions as these arrows.
Please let me know if any out there has any input at all. Also, let me know if there is anything else that I may be missing before I commit a consumer error.
Thank you,
Trey Vollmer

treyvon wrote:
I'm looking into picking up the Mighty Mouse and the Wireless Keyboard, but I've noticed that the keyboard has some set backs.
It's missing the right side. This bothers me because I use the arrows very frequently to navigate through my timeline - they're very helpful for several reasons. Will I be able to assign keys on my wireless keyboard to do the same actions as these arrows.
If you're talking about the Aluminum (super-thin) wireless keyboard, it certainly has arrow keys.
What's missing is the numeric keypad and the home, end, page up/down buttons.
The numeric keypad is a kind of a big deal for those of us who make use of the number pad key shortcuts to disable/enable AutoSelect (Command-Numeric Zero toggles all Video Tracks, Option-Numeric Zero toggles all Audio Tracks). OK, so that describes maybe 15 people out of the millions of users. But, thankfully, you can use Button Bars to replace those functions.
The numeric keypad is also important if you use the Multicam keyboard layout, but that can be replaced by Button Bars.
Don't like the mouse and keyboard that you have now?
Message was edited by hanumang

Bootcamp, Mighty Mouse and Keyboard not working

Hi All,
I just install yesterday Windows 7 (Ultimate 64bits) by Bootcamp in my iMac 21" (bought in 2013).
During the installation, the Mighty Mouse and the keyboard were not working (except the first W7 screens, selecting partition and language), and now, installation finished, i got to use an external keyboard to select username and password, because Mighty Mouse and Wireless Keyboard are not working with Windows.
I restart the computer using OSX and both are working fine.
Could you please help me?
Best
Jorge

upgrading to vista sorted things out!

Mighty Mouse and Rt Click??

Similar Messages

Maybe you are looking for