Mighty Mouse buttons 3 & 4 not working
I am using the Mighty Mouse with a G4 PowerBook and the latest version of Tiger. At first the mouse worked fine. But a few days ago buttons 3 and 4 simply stopped working. I press them and nothing happens.
I checked the mouse preference pane and it was all there as it should be - it still showed the mouse with all 4 buttons properly allocated. Re-installing the software made no difference.
Am I missing something - or has my Mighty Mouse just malfunctioned?
Without using something like USB Overdrive (http://www.usboverdrive.com/USBOverdrive/) then I'm afraid you're stuck with whatever the Mouse preferences allow you to set buttons 3 & 4 to.
Centris 610, Beige G3 300 DT, iBook, PowerBook G4 Mac OS X (10.4.5) iPod (original), iPod shuffle, iPod nano (with Radio Remote)
Similar Messages
-
Mighty Mouse Wireless Right Click not working
Hi Friends!
I am having some difficulty getting my Right Click on my Wireless MM to work. I am aware that I need to keep my left finger off the mouse but it still does not seem to be working.
Any thoughts ?
Thanks !
JTry replacing the battieries (or just taking them out and putting them back in). Forcing the connection between the Mighty Mouse and the iMac to break. Then put the new batteries, or the ones you were you using from before, in the MM.
Re-link the Mighty Mouse to the iMac and try applying the settings for the right click function in System Preferences.
Remember to mark as helpful or solved.
-benny -
Mouse pad virtual wheel not working in bookmarks menu
Hi,
My laptops mouse pad wheel does not work in the bookmarks menu. It works fine in any other application or on the main view in firefox. I'm not very organized and have hundreds of bookmarks, it's frustrating to have to wait for the up/down buttons in the bookmarks menu to scroll.
I've read https://support.mozilla.com/en-US/kb/Cannot+scroll+with+mouse+wheel+or+touchpad
which did not work.
Here are my specs. I won't dump the entire dxdiag, I'm sure there's a lot of redundant info. in it.
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.10) Gecko/20100914 Firefox/3.6.10
System Information
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_gdr.100618-1621)
Language: English (Regional Setting: English)
System Manufacturer: Gateway
System Model: NV53
BIOS: Ver 1.00PARTTBL]
Processor: AMD Athlon(tm) II Dual-Core M300 (2 CPUs), ~2.0GHz
Memory: 4096MB RAM
Available OS Memory: 3838MB RAM
Page File: 1489MB used, 6185MB available
Windows Dir: C:\windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode
DxDiag Notes
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Input Tab: No problems found.
DirectInput Devices
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Poll w/ Interrupt: No
USB Devices
+ USB Root Hub
| Vendor/Product ID: 0x1002, 0x4397
| Matching Device ID: usb\root_hub
| Service: usbhub
Gameport Devices
PS/2 Devices
+ Launch Manager
| Matching Device ID: *pnp0303
| Upper Filters: DKbFltr
| Service: i8042prt
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
|
+ Alps Pointing-device
| Matching Device ID: *pnp0f13
| Upper Filters: ApfiltrService
| Service: i8042prt
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDDMaybe FCP 3 doesn't provide support for mouse wheel scrolling? I can't remember and I'm not going to install FCP 3 to test that theory.
You should be able to at least set the MS mouse driver to perform scroll wheel functions in FCP through the MS mouse preference pane (zoom in/out for example) but I don't know if that includes scrolling. -
Touchsmart 520-1047c Mouse and Keyboard will not work after sleep mode
I have an issue which I need some help with. When my computer goes to sleep the wireless mouse and keyboard will not work unless I restart, however each one will wake the system up but will not operate after that. I have tried just making the display go to sleep, both go to sleep but that makes no difference same issue occurs. The only work around I have found is going into the power settings and turning the sleep mode off for booth the computer and display. This does not solve the problem it just masks it. New batteries, unplugged and replugged the dongle, updated the bios and all drivers. Don't know what else to try. Anybody know how to fix this? Thank you in advance for your help.
Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that the mouse and keyboard on your desktop computer does not work if your computer enters sleep mode, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). This should help enable your system to wake from sleep mode using your wireless keyboard and mouse. I also recommend connecting wired peripherals to diagnose the functionality of your keyboard and mouse. If your system is still not able to wake from sleep mode, please follow the steps below to restore the default power schemes on your computer: Step 1. Click the Start button
Step 2. In the search box, type "Command Prompt"
Step 3. Right-click Command PromptStep 4. Click Run as administrator
Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards -
my speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished
Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.
-
this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thankswell in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone. -
Can not install windows 7 pro using boot camp as mouse and keyboard will not work Help please
I have a new iMac and trying to install Windows 7 Pro using boot camp. I have reached the stage of starting to load windows from the DVD then discovered the mouse and the keyboards not working so I could not interact with windows installation.
Open, if not so already, the Windows formatter. Identify the BC Windows partition. It will be the one listed with the proper size you created and/or will be labeled as a C: drive. Be careful you select the right one or you may be corrupting the entire drive.
Format the partition as NTFS. -
Why isn't my back button in Safari not working? I am constantly resetting Safari.
Why isn't my back button in Safari not working? I am constantly resetting Safari.
Cheryl...
Go to ~/Library/Caches/com.apple.Safari
Move the Cache.db (or ApplicationCache.db) file from the com.apple. Safari folder to the Trash.
Restart your Mac. Launch Safari. Try the back button.
~ (Tilde) character represents the Home folder. -
What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
Disabling Radio Button Conditionally is not working Well
Hi friends,
I have three radio buttons
<li>self
<li>New Hire
<li>On Behalf of
I will be showing this radio button conditionally according to the user who logs into the application.
Assume, suppose if a person 'A' enters into the application means he will be shown only these radio button options ---NH---,----OB----,----Self-----
Suppose, if a person 'B' enters into the application means he will be shown only these radio button options ----NH----,----Self---
If a person 'C' enters into the application means he will be shown only these radio button options ---Self---
I have restricted those radio buttons according to the users who enter into the application using their roles.
But my challenge here is once the user logged in and if he select anyone of the radio button means,
Example if he selects----NH---means, then ---OB----and -----Self---radio button has to disable and if he selects ---OB----means then ----NH-----and ---Self---has to
disable(vice versa).
I have also achieved the same using the DA.
With true action as: javascript Expression i have given the following codings( i have written the below DA for three cases, if the request_class_code is equal to
(NH,OB,S)
var enabled=$v('P22_REQUEST_CLASS_CODE');
if (!$u_SubString(enabled,'S')) $('#P22_REQUEST_CLASS_CODE_2').attr("disabled","disabled");
if (!$u_SubString(enabled,'NH')) $('#P22_REQUEST_CLASS_CODE_0').attr("disabled","disabled");
if (!$u_SubString(enabled,'OB')) $('#P22_REQUEST_CLASS_CODE_1').attr("disabled","disabled"); The above DA is working great only for the user who has the option of viewing three radio buttons in my form(i.e)(NH,OB,S).
For the user who has the option of viewing two or one radio button, it is not working properly(i.e)(NH,S) or(OB,S) or(S).
Why it is not working for the user with two options or with one option radio button means, the source of that radio button property is changing. Since i have taken
the source of my radio button in my DA only when the three options are present.
How i can solve this issue for the user who is having this two radio option or one radio option.
Hope you understood clearly about the problem.
Brgds,
MiniHi,
If I did understand what you like have this might work
var lVal = $v('P22_REQUEST_CLASS_CODE');
$('#P22_REQUEST_CLASS_CODE input:not([value="' + lVal + '"])').attr("disabled","disabled");Regards,
Jari
http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME -
TS2662 my new magic mouse scrolling & swiping will not work
my new magic mouse scrolling & swiping will not work. Help??
I had this happen to me as well. just last week (july 28, 2014) I brought my magic mouse from home to work since my work mouse was going south. paired it with bluetooth, it moved and clicked but no scroll or gestures. searched till I nearly ready to give up. then I installed USB overdrive. many forum posts said too remove that. I didn't have it, so I installed it. and then un-installed it. everything works great now.
hope this helps someone. -
My iMac mouse right click does not work now
Hi all,
My iMac mouse right click does not work now. It was fine a couple of days ago.
Right click is definitely enabled, I have checked it several times.
A Google search revealed that in Firefox it could be that I'm not using the latest version of Firebug. I have auto updates on and Firebug is the latest version 1.11.3
I use right click for correcting spell checked words, instead of a suggested correct spelling I get the 'open in a new tab' menu.
In Firefox when I right click to open in a new tab I get the menu but it does nothing.
It is driving me mad
Any help will be greatly appreciated,
Thank you
P.S. thought it was suddenly working when I did the spell check in this post but it was the left click doign it....I don't use Firefox so I can't test it, but it might be something to do with a preference setting. Have a look at this link (ignore all the instructions), just look at the image of the preferences, there appears to be a setting in Javascript preferences relating to contextual menus. Check to see what your settings are:
http://stackoverflow.com/questions/16377381/disable-firefoxs-silly-right-click-c ontext-menu -
I HAVE IMAC 27 INCH MY MOUSE RIGHT CLICK IS NOT WORKING PROPERLY .ANY ONE HAVE HIS PROBLEM
I HAVE IMAC 27 INCH MY MOUSE RIGHT CLICK IS NOT WORKING PROPERLY .ANY ONE HAVE THIS PROBLEM
Have you tried going to System Preferences>Mouse and making sure that right click is set to secondary click?
-
Hi. I'm using Compaq CQ40-101TU which is running Windows 7 Professional 32-bit.. My optical mouse (AVF AM1940U) is not working in USB ports. The pointer of mouse is always stuck at top of the screen. I can move the mouse left or right to both edges of the screen at the top and can right click in this regard it works but I cannot move the mouse down the screen.
What is the problem? May I know how to solve it?
Thanks.Ya. Another mouse didn't have problem. This is the first time I face this problem. When this optical mouse is plugged into USB ports, the driver named "iBall Advanced Mouse" is being installed. After that, my mouse cannot working.
Is that I have to install another driver before using this mouse?
Thanks. -
Satellite M70: Control button keys are not working
I currently reformatted my M70 to WinXp Pro Sp2, downloaded all related TOSHIBA drivers and related programs [ie. Toshiba control button driver / program] and system is running normal. However, CONTROL BUTTON keys are not working, was working fine with XP Home edition and Win Media but when I called Toshiba Support they couldn't help me because I had upgraded to Xp Pro. My Question is...Is there a fix or a solution to this issue and where can I download or find this fix.
Thanks
EmmHey Folks
Thanks for the advice, however, I did download the control driver and the controls program for the M70 model AND installed them in that order. The Controls Driver installs correctly but unfortunately, when installing the Controls Program, I get a message that the program will not install because it's not the right version for my M70-CL3 [PSM73C]. Not sure what to do here. I would think that everything should work properly seeing as taking the step up to XPPro SP2 isn't that far of a stretch.
Maybe you are looking for
-
CSCui55504 - show Mac address table from RP gives an error msg and40;but from SP works )
Hello Cisco, Is there any updates or ETA regarding this bug, as our production 6500 core switch is experiencing this issue and viewing mac-table is a critical activity we perform everyday to troubleshoot client connections.
-
How to insert into date column based on other columns?
Hi I have four columns in a table called game named as R_Day - Type - Number R_Month - Type - Number R_Year - Type - Number R_Date - Type - Date I have around 1000 records and i want to fill R_Date column based on the data in the R_Day,R_Month,R_Year
-
My macbook pro can't read a dvd-r double layer
Hi everyone! I have a Macbook Pro 2.66 GHz Intel Core 2 Duo 15 inches (mid-2009, model identifier MacBookPro5,3) with Mac OS X Lion 10.7.3. I can't read a commercial DVD DL-R (as indicated on the DVD). The DVD player doesn't mount the DVD and reject
-
How to get a field more than 255 char back in ITCSY stru
I am getting multiple invoice numbers from the calling pg. The calling pring pg is standard, so cannot touch that. Now in my sapscript, i have to concatenate all invoice numbers and show them. I had used a perform to do so. It was fine till now. But
-
TS4006 Issue with receiving notification emails !
I use to receiving notification emails each time i log into " find my iPhone " , but now i receive it just if i inter from new device , how can i receive those emails again ?