Mighty mouse - incorrect button clicks

I have just upgraded my Mighty Mouse to the bluetooth version, and am finding with my new mouse that 50% or so of clicks to the middle button are actually interpreted by the mouse as clicks to the right or left buttons.
I never had this problem with my old wired mighty mouse - so I'm wondering if I have a fault, or whether something has changed in how you click the buttons???
IMac G5 Mac OS X (10.4.7)

Hi design256, and a Warm Welcome to Apple Discussions and the Power Mac G5 Forum!
As far as I know it's supposed to work the same. Might have been some changes to the sensors to accommodate the wireless but not mentioned anywhere.
Personally - I've found successive replacement [wired] MM buttons respond slightly differently - and have eventually turned off scroll-ball-click and just use F9. Although in my case it's possibly caused by brain/finger communication errors, I think.

Similar Messages

Mighty mouse side buttons

I use a wired mighty mouse with my mac. I use the side buttons for expose in mac. But in windows I could not find any option to customize the usage of the side buttons. Thus they are by default set to back function. Its very annoying sometimes as I may click them accidently and thus the webpage I am viewing changes to previous page. Its very annoying is there any option to avoid this?

Before messing with the mouse, please find the Caps Lock key on your keyboard and turn it off
The mighty mouse side buttons can be configured to do ONE thing only as far as I know - they both operate as a single button. In the mouse configuration tab of System Preferences you can set the buttons to a pre-specified option or you can tie it to running an AppleScript. Perhaps using an AppleScript you can figure out how to make this work.

Can't assign "Dashboard" to Mighty Mouse Scroll Button

For some reason assigning "Dashboard" to my Mighty Mouse middle button (Scroll) doesn't work. Any other function I assign to it works fine.
If I assign "Dashboard" to either the left or right butons...it works fine, but I want it on the Scroll button. Any thoughts? Thanks.
Larry

Gave up...no replies.

Resetting bluetooth may fix your mighty mouse scroll button

I have had this problem with the scroll button on my mighty mouse for months and months, and the only advise I have managed to get from here when I complained was to clean it. But I tried that many times and I have had nothing but problems with it, so much so that I recently called Apple and they agreed straight away to send me a new one.
What made me call them today was the clicking action and side buttons on my mighty mouse also failed completely, and I thought the thing was totally broke. Whilst I was on the phone I happened to mention that my wireless keyboard also keeps losing its connection, and the advisor told me to do this following...
This advise was used on my MacBook 13.3inch model from last year.
Turn off Mac, removed the power and battery and hold down the power button for 5 seconds. Then turn it back on, but while you turn it back on hold down the altcmnd+RP buttons together. You will hear it ching two times as it turns on, let go after the second ching.
This apparently resets the bluetooth and it fixed my mouse, it now works perfectly.
Anyway, I called apple back to say that this reset not only fixed my keyboard, but also my mouse. Everything now works perfectly. The problem was bluetooth all along and not that the button needed cleaning.
But they said they would still send me out a new one, and so long as they received a mouse back in the post they wouldn't charge me. I accepted that offer and I'll see how it goes with the one I have. I feel that I may have damaged the scroll button trying to clean it and feel that I probably should get a new one anyway on account of that.

Hello stu:
What you apparently did (based on the feedback you got from from Apple) is reset the SMC (system management controller) and the PRAM. When one has odd problems that do not appear software related, those are sometimes suggested as troubleshooting steps.
http://support.apple.com/kb/HT1411
http://support.apple.com/kb/HT1379
Resetting the SMC should not, however, be used until other avenues have been exhausted (based on Apple guidance)
Barry
Message was edited by: Barry Hemphill

Wireless Mighty Mouse Looses Right Click Functionality

I am using a new Wireless Mighty Mouse (about one month old) With new batteries.
Since I started using it, the (secondary) right click would stop function after repeated use. After many frustrating trouble shooting attempts, I discovered that the Right Click will work again if the mouse is left idle for about 15 - 20 minutes.
I will like to know if this is a defect that's inherent in the Mighty Mouse system, and if so, has anyone found a solution to this problem or is there a fix?
Any input would be very much appreciated
Mac G5. 2ghz DP Mac OS X (10.4.8)
Mac G5. 2ghz DP Mac OS X (10.4.6)

Unfortunately my experience suggests no. I'm on my 5th (or is it 6th?) wireless Mighty Mouse now, and they've all behaved just as you described. The latest replacement was only a week ago. I suspect the only point in replacing it further times would be to demonstrate that you've tried all you can. As far as I can tell, my only recourse at this point is convincing Apple to refund me, which is a shame because I like the scroll ball design.
I should note that I'm in Australia, in case stock has been slower to update here, but it shouldn't make a difference...
I've noticed that the problem seems to occur a lot more frequently under hot conditions - room heater on, hot hands etc. Could it still think the left button is being touched because it's warm and/or sweatier than usual?

Corded Mighty Mouse only middle-clicks in bootcamped Win7

... whereas in OSX, middle click ceased to function.
So let me explain this further:
I have a corded Mighty Mouse, model number: A 1152
In OSX Snow Leopard, it is only capable of left clicking. I don't know why right and middle click won't work (the wheel also only goes up). In System preferences I have set Left and Middle buttons to Left click; right button to right click. But I use ctrl+click because right click won't work. So, I'm pretty much used to this setup although the Mighty Mouse is only a year or two old.
Then I installed Win7 via boot camp. Clicking was weird during installation so I managed to get over it with the keyboard (which works fine btw). But then, after installing all the updates and the windows support software it still only middle clicks. Sometimes, maybe depending on certain pressure angles on the mouse, it will do a normal Left click, but the next click is mostly middle.
So how come middle click doesn't exist while in Snow Leopard but in Win7 there is only middle click?

did you use osx bootcamp to make a windows driver disc ? if not do so

Mighty Mouse side buttons going haywire

My wired MM just recently lost complete bodily function of its side buttons. Practically any movement of the mouse (especially touching it around the area of the right side button) will send it in a frenzy. I can hear the little click too, as if I were pushing the buttons super fast. Because I have my side buttons set to "show all windows" it pretty much renders the mouse useless. I can't work with Expose flipping it's lid, obviously. Has anyone else encountered this? Is it just a matter of cleaning out something inside?

[Discussions on working of Mighty Mouse|http://www.macosxhints.com/article.php?story=20070103082828118]
[How to clean your Mighty Mouse|http://support.apple.com/kb/HT1537?viewlocale=en_US]
[Using a Mighty Mouse|http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh2244.html]

Mighty Mouse wheel button

The wheel button on my Mighty Mouse will not allow itself to be changed to any other function than as a window scroller. If I click it once inside a window and move the mouse (not the wheel) forward or back it scrolls the window up or down. No matter what I set it to. I would like to set it to putting Dashboard on the desktop. If I set the either the primary or secondary button to Dashboard it works fine. How do I fix this?
Also, when I used Konfabulator widgets with my powerbook I could have any widget sitting on the desktop all the time. Can I do this with Dashboard widgets? I like the calendar and iCal events to be visible all the time.
Thank you for your time!
Dan

Hi vandan,
I have the same problem with my MMouse, Button3 and 4
don't work.
Did you get an helpful answer?
No, not yet.
I wonder if there is a preference file somewhere that needs to be trashed so a new setting can take hold.

Wired Mighty Mouse isn't clicking some areas of the screen

I'm having some trouble with my Mighty Mouse since yesterday. The system started not responding to some clicks in most areas of the screen, such as the top menu, window titles, finder windows, desktop. The weird thing is that clicking in Dock icons works fine, as well as clicking inside a web page in Safari.
I've rebooted several times, ran the Snow Leopard 10.6.2 update, but none of these helped. :/
Do you guys know how to get around this? Next Monday I'll test this Mighty Mouse with my Mac Pro at work, I hope it's not a problem of the mouse itself, but a system problem.

I had exactly the same problem after giving my ball a super long scrub to clean it. Only the secondary click sometimes worked. Checked to cable iside, but no luck.
Then went to System Preferences as I figured the middle button was working a bit and set all buttons to Primary by selecting them with the Tab key, scrolling to my option with the up and down arrows, and confirming by pressing the Space key.
Now my mouse works as a simple one-button device, but that it OK for me. Must have damaged its brain with my ball cleaning. See how you go.

Mighty Mouse problems - dead click

Recently purchased a Apple Mighty Mouse. Works fine until the click is no longer read by the computer. Usually when switching apps. The cursor moves fine and it causes the dock to appear and react correcly when moved over it but nothing can be clicked or activated.
Even if I have another input source plugged in (Wacom, trackball) these no longer react to clicks eaither. Most of the time I'm running without them.
The keyboard also seems to be in-active at that time.
Is this a known problem or conflict of some type? The only solution seems to a full power reset since the I can't bring up force quit with keyboard.
Thanks.

Hi Scott
I bought a mighty mouse shortly after they were released and I found after a while, that if I used Button 4 [the squeeze button on the side] as the Application switcher then the left and right click wouldn't be recognised until the computer was restarted.
The only soultion I have is to not use Button 4 for anything and stick to Command & Tab for using Application Switcher.
Hope this helps
LG

Bluetooth Mighty mouse wont right click

I have set the right mouse button to 'secondary' in the preferences, however i still have to press ctrl to access the right mouse menu.
How can I correct this?

Hello,
In addition to checking the setting as already proposed, do check how you are using the mouse.
The Mighty Mouse uses sensors to detect which button you mean to press.
There is actually only one button. So, based on where your fingers are, it will determine which button you meant to press.
As long as you have a finger over the left button location, anything you press will be a left-button / primary button click.
So, as a test, raise your left finger about an inch above the surface before you right-click. See if that makes a difference.
The mouse could just be reading your left finger and assuming you mean a left click.
I have to deliberately remove my left finger from the mouse anytime I want to right-click. Otherwise I always get a left-click.
I hope this helps.

Mighty Mouse and Rt Click??

I want to make the top button perform like a rt click (ie. Control click) How do I do this? I know how to get to the setup preferences for my mighty mouse but I can't seem to find this.

You might try SteerMouse. It has some nice features including that.

Mighty mouse and right click???

I have a mighty mouse and the right is set to a primary button however it doesn't function like a right click. i still have to press control to get the right click functionality?? HELP!!

What is strange about my mighty mouse which also experiences similar issues is that you have to be careful where you are pushing it. My right tbutton is set as a control click but if I don't push it in the very upper right hand of the mighty mouse it behaves as a single click. The left hand button, as such, does not seem to be as sensitive to placement as the right hand one. For a long while I could not get it to work at all, until I figured out where I actually had to strike it.
I had never used a mighty mouse until I purchased a new iMac a couple of weeks ago and just figured it was "operator difficulty" as I am far more used to a trackball than a mouse. I may still go back to one if I can't get used to this mouse. I think you really have to put your whole hand over the mouse to make it function properly and I tend not to do that.
Does this help you with your issue? I am not sure, maybe there is some sort of difference in the way the mighty mouse works with new hardware?
Good Luck! Wish I had more to offer other than trying carefully to position your handin difernt places and see if that helps.
Message was edited by: Al Van Malsen

Script for Button 3 or using side buttons on Mighty Mouse for Button 3

Looks like the preferences for Mighty Mouse only allow the side "squeeze" buttons to be used for Button 4. I don't want to use the scroll ball for Button 3 because it keeps zooming when i do. Does anyone know how to write a script to configure the side buttons to be Button 3?

I think I'm having a similar problem. Lately, my side buttons have been activating seemingly on their own. I hear multiple clicking sounds. I know I can turn off the button, but I use USB Overdrive to activate page back in browsers and the Finder, so I can be surfing and be brought back several pages at once. Very irritating. It doesn't seem to be consistent either. I bought my latest iMac in June, so I the warranty should be in place, but I'm an hour and half from the nearest Apple store, making it somewhat inconvenient to have the mouse looked at.
Heh, right when I was about to post this message, it went back several pages.

Mighty Mouse, Programmable Buttons, and Universal Access

I give up. I asked the folks at the Apple Store if I could program the Mighty Mouse such that one of the "primary" buttons could perform a "double-click" and the other "primary" button perform a "single-click" (i.e., so I don't have to push my finger down twice to both select and open an item). I was told the MM was "fully programmable" but if I can't make the thing do that, I wouldn't call that "fully" programmable. Not good for those of us with severe hand and arm problems and any hand surgeon, PT, OT, and ergonomist will tell you that this is a big deal - all the clicking and finger pushing.
Maybe I'm not seeing something or some way to do this, please advise. I have a Kensington old wired mouse recommended by many ergonomists and PTherapists for this reason but thought that with the advent of Apple's new MMouse, Apple would have thought of this and allowed for such programmability in this new mouse. Too bad... I'll likely have to return it unless one of you can tell me how to program one of those buttons to do the 'double-clicking' for me for the price of 1 click.

Can it be programmed, though, such that one click on an item will both select and open it? Please let me know. It seems impossible to get answers to this question from mouse manufacturers. I have now waited almost a week for Kensington to answer me even after calling and talking to a supposed "technician".

Mighty mouse - incorrect button clicks

Similar Messages

Maybe you are looking for