Mighty Mouse - Mouse/keyboard system preferences gone

I have a bluetooth mighty mouse instaled in my computer but now I cannot access the mouse/keyboard preferences in the System preferences. They do not appear. The mouse is working just fine but I cannot change anything in the preferences. And I cannot watch the state of charge of the batteries either. I cannot see nothing. That tab is all grey now.
I tried also to do so via the bluetooth preferences but when I ask to open the Bluetooth preference of the mouse a window appears and says that the mouse preferences are not shown because I haven't any mouse connected to my computer.
I remember that when I had access I changed the name of the mouse.
I already deleted the connection and tried to re-install it again. But the mouse appears with the same name, and the problem persists.
Please... Any bright soul?

I have a slightly different problem: My bluetooth Mighty Mouse works in a basic mode (primary & secondary button, scroll wheel) but the side buttons and scroll buttons do not work. In the Keyboard & Mouse preferences, I have Dashboard set up for the scroll button and Expose set up for the side buttons. They do not work. If I set up the primary or secondary buttons for Dashboard or Expose, it works. In the Bluetooth tab, the Bluetooth Mouse Name is blank and Battery Level is grayed out. In the Bluetooth Preferences, it shows Mighty Mouse connected. Any ideas? I am running OS X 10.5.4 (but it didn't work in 10.5.3 either)

Similar Messages

Can't access Keyboard and Mouse panel of System Preferences

I can't access the Keyboard and Mouse panel of System Preferences. System Preferences starts up fine but when I click to access the Keyboard and Mouse panel, System Preferences indicates in the title bar of the window that it is loading the panel but it never does.
Does anyone have an idea about how to fix this? Thank you.
Brian

Hello Brian:
I would trash the preference file (com.apple.systempreferences.plist) and then restart the computer.
Barry

HT1379 iMac cant find mouse in the system preferences, new batteries and turned on

iMac cant find mouse in the system preferences, new batteries and turned on
Mouse seems like it just died. Waiting for bluetooth mouse to be discovered...just spins and spins.
Help please

simensen wrote:
I have a 2007 MacBook and a new Ipad Air. Is it possible to sync the two even though I don't have Icloud in my Macbook preferences?
Yes. You can use iTunes 11.
As noted, you need 10.7.5 to use iCloud though.

My system preferences have suddenly disappeared! I have the language and text icon but that is the only icon that is displayed! where have my system preferences gone and how do i get them back??

I went to my system preferences today and they are all gone except for my language and text icon! I have the language and text icon but that is the only icon that is displayed! where have my system preferences gone and how do i get them back??

Double click on the picture of the HD on your desktop, then look at the bottom of the window that opens.
First check the S.M.A.R.T. status on your HD: Applications > Utilities > Disk Utility > in the panel at left, select the first item in the list/your HD mechanism > look atthe bottom of the main window next to S.M.A.R.T. status and see if it says “Verified” or something more ominous like “Failing.”
If S.M.A.R.T.status is "Verified," run Repair Disk: Boot from install disc (insert disc > restart > immediately hold down c key and keep holding it until you see “Preparing Installation”) > at first screen select the language and click Continue > click on the Utilities Menu in the menu bar > open Disk Utility > select your HD in the panel on the left side > click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility such as DiskWarrior or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD (repair utilities can only repair the directory structure, not the HD itself). When this is finished, quit Disk Utility, quit the installer, and restart. Once booted normally, go to Applications > Utilities > Disk Utility and run Repair Permissions.

Bluetooth and keyboard system preferences not working

Hi all,
When I try to change the keyboard system preferences or the bluetooth system preferences, the 'application' locks up (Doesn't bring up any details, force quit gets out of it). I've tried leaving it for ages to see if it eventually opens but it doesn't.
This means I can't use any bluetooth devices or change the keyboard shortcuts.
It only happens on one of my otherwise identical Mac Pros; the other is fine.
Any clues as to how to repair it? I could try reinstalling Snow Leopard, but I'd rather try ditching a preference file first.
Thanks in advance,
Simon.

Hi all,
When I try to change the keyboard system preferences or the bluetooth system preferences, the 'application' locks up (Doesn't bring up any details, force quit gets out of it). I've tried leaving it for ages to see if it eventually opens but it doesn't.
This means I can't use any bluetooth devices or change the keyboard shortcuts.
It only happens on one of my otherwise identical Mac Pros; the other is fine.
Any clues as to how to repair it? I could try reinstalling Snow Leopard, but I'd rather try ditching a preference file first.
Thanks in advance,
Simon.

Keyboard system preferences resetting after restart

Greetings,
I began with 2 similar problems. My menu bar and keyboard system preferences would reset after each startup. I fixed the former with https://discussions.apple.com/thread/6028346?tstart=0
Still, every time I restart or logout my keyboard system preferences reset to the default. These defaults interfere with the software I run- Logic & Pro Tools, so while not the worst thing to have to remember to reset them each time, it is a drag.
Any help will be appreciated
Thanks

The procedure below will reset the permissions of a user's home folder in OS X 10.7.4 or later, including 10.8 or later. If you're running an earlier version of 10.7, update to the latest version first. This procedure should not be used under OS X versions older than 10.7.4.
Back up all data before you begin.
Step 1
Click the Finder icon in the Dock. A Finder window will open.
Step 2
Press the following key combinations, in the order given:
Command-3
Shift-command-H
Command-I (the letter "I" as in "Info.")
The Info window of your home folder will open.
Step 3
Click the lock icon in the lower right corner and authenticate with the name and login password of an administrator on the system. If you have only one user account, you are the administrator.
Step 4
In the Sharing & Permissions section of the window, verify that you have "Read & Write" privileges. If not, use the "+" and "-" buttons in the lower left corner to make the necessary changes.
Step 5
By default, the groups "staff" and "everyone" have "Read Only" privileges. With those settings, the files at the top level of your home folder will be readable by other local users. You can change the privileges to "No Access" if you wish, but then your Public and Drop Box folders will be inaccessible to others. Most likely, you don't need to change these settings.
Step 6
If there are entries in the Sharing & Permissions list for users or groups other than "me," "staff," and "everyone," delete them.
Step 7
Click the gear icon at the bottom of the Info window and select Apply to enclosed items... from the drop-down menu. Confirm. The operation may take several minutes to complete. When it does, close the Info window.

Bluetooth System Preference Gone / Can't Find Keyboard

i booted up my mac pro today and it couldn't find my wireless keyboard. I went to System Preferences and clicked on bluetooth and got the spinning beachball. Restarted and now my bluetooth preference is gone. Changed the batteries on the keyboard and no luck. Ran cocktail (repair disk permissions, etc) and re-set p-ram. Please help!

Same thing hapened to my Macbook overnight. I leave the computer on all night. When I left my Macbook, I know my Bluetooth keyboard and Mighty Mouse were working, but now all I get is Bluetooth: Not Available. I've restarted several times and nothing changes. I appreciate any help.

Unable to change mouse settings in System Preferences

Using a standard wired USB Apple Mouse (oval shape with scrolling nib and squeeze option for the 4th button), the options in System Preferences seem to have no effect. Have tried configuring the secondary button (to emulate right click) and nothing happens. The 4th button used to function as "Mission Control" but now there is no effect. Is it possible the mouse hardware no longer works? It's less than a year old.
Some other information: I recently reinstalled the iMac to make room for BootCamp and Windows 7. Could that process have soured to mouse settings? Right clicking (same mouse) works in Windows 7 so I doubted the hardware problem.
I've followed steps for removing HID plists and stuff from the Library/Preferences area, but no joy. Is there some other troubleshooting I can perform to get this feature working again? It *was* working before the reinstall, but now isn't.
BTW: I'm aware of the "<control>click" to get a right click going, but when you get used to using something and are very productive in that method it is difficult to just "change the way I'm doing it" so please help me to find the cause for this issue instead of teaching me new ways to do things.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Magic Mouse Battery Level - System Preferences

I put this question up awhile ago but got zero responses...
13" MacBook Pro (mid 2010) with OS X v10.8.3
The Magic Mouse Battery level shows a constant 100% level in System Preferences and then it will suddenly give me the message that Mouse batteries are low. I will then check System Preferences and it will show, what I assume is, the correct battery level of 5%.
Has anyone seen this issue with Mountain Lion? I never had the problem with Snow Leopard. Also, I've tried resetting SMC and PRAM but no change. Any ideas out there?
Thanks in advance,
d

Hello Barry,
Thank you for the reply. I was thinking that I was the only one having the problem since I couldn't find any discussions on it. Perhaps though, I may have not searched the database enough to find anything.
I can't remember having the problem with Snow Leopard; only since I've been using Mountain Lion. I will definitely check out the Might Monitor widget which sounds good!
Do you know where I can get to an Apple page to report this bug? It's not a massive problem but I think it would be fair to report it to Apple anyways.
Thanks again for your help and I look forward to your reply regarding reporting the problem!
d

Removing mouse driver from system preferences, other...how?

In system preferences, other, how do you uninstall items? I have read in this forum that if you right click and choose "remove (xxx) preference pane" it will uninstall it. If remove doesn't uninstall it, exactly what does it do?
Is it that simple? I am trying to remove a mouse driver.
thanks
bob

I'm afraid I don't follow you. Each component can be individually deleted. But as I said removing the preference pane (in any way) will not remove a driver located in the Extensions folder (if there's a driver involved.) Likewise removing a driver will not remove a preference pane. This is why you should use the uninstaller that comes with the software you are using (which you haven't mentioned.)
For general help with uninstalling software see:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are also several shareware utilities that can uninstall applications:
AppZapper
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software.

Feature Suggestion for Keyboard System Preferences - Modifier Keys

I recently picked up an iMac and it came with the new low-profile aluminum small keyboard -- without the keypad.
I really like the small keyboard except for one thing -- the placement of the fn and control keys. The larger keyboard has three modifier keys on the left side: Control, Option, Command. The small keyboard has four: fn, Control, Option, Command.
It is annoying to switch between keyboards where the control key is in a different spot on each one. Retraining my finger on a per-keyboard basis is hard.
Apple thoughtfully provided in System Preferences a Keyboard control panel and it thoughtfully provided a "Modifier Keys..." popup to allow you to reassign the modifer keys. A great feature.
The problem is: you can't use this to modify the behavior of the 'fn' key. It is apparently hardcoded.
If I could use the modifier keys dialog to change the 'fn' into a 'Control', then I could use this keyboard without swearing everytime I miss the control key.
Another feature that would be great would be if I could also have different bindings for the modifers on the left side versus the modifiers on the right. That would allow me to reassign one of the right side modifier keys (that I never use) to be an 'fn' key.

I'm in the exact same boat as you...that Fn key is driving me nuts. I tried DoubleCommand and some other things as well, but the only thing that's coming close to what I want is a free download called "KeyRemap4MacBook."
Just go under the "Remap Fn Key" section and you can basically have it act as the Command key. (I actually always had my Command and Control keys swapped, so now both the Fn and Control keys now essentially act as the Command key.)
There are a few quirks I haven't figured out -- I can't seem to do Forward Delete -- but again, it's the only thing I've found so far that works.

Cannot get into keyboard system preferences

Hey all,
I just installed a Logitech Wireless Solar Keyboard K750 for Mac and everything seems to work fine except for the Expose and Dashboard keys. On Logitech's website it says you can fix it by going into System Preferences -> Keyboard, but since I installed the Logitech keyboard it just says "Loading Keyboard..." when I click it and nothing happens. Any idea how to fix this?

Essentially that fixed it. I just uninstalled Logitech's Control Center application (Applications -> Utilities) and restarted and it worked. Didn't have to reinstall anything, keyboard still works, and now I can access my preferences and fix the wrongly-binded keys.

Where have System Preferences gone???

After re-installing the operating system, because it was no longer possible to log on to my iMac, suddenly there are no more system preferences. I select "System preferences" in the Apple menu and nothing happens.
Any ideas what to do or try to get access to system preferences back?
iMac G4 Mac OS X (10.2.x)

Hi Michael!
Is System Preferences still in your Applications folder?
Does it appear in the Dock?
Computer > HD > Applications: HERE?
In Another Of Your Posts, your computer specs state that you are running iMac G4 Mac OS X (10.3.5).
This post states iMac G4 Mac OS X (10.2.x).
What type of install did you do, to go from 10.3 to 10.2?
Is there a Previous System Folder on your HD?
When you discovered your Memory Problem, which OS X were you using?
Have you tested the new RAM?
Sorry for all of the questions, but I'm trying to lay some groundwork, to assist readers who may be able to help you.
When posting a question, it is best to divulge as much background info as possible.
All of your problems, seem to me, to be somehow related.
Good Luck!
ali b

System Preferences Gone!? 10.5.8

HELP ME PLEASE
for reasons unknown... my system preferences dissapeared. Im running 10.5.8 in my mac. I need that someone with the same OSX Uploads the system preferences Archive or send it by email. pleasee!!

You will have to reinstall OS X. What you ask for is illegal and piracy.
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

System Preferences gone!!!! Noobie

I recently purchased a G5 without the install disk and the System Preferences is missing in action and no where on the HD's...I looked everywhere!!! I do have an opportunity to purchase Leopard version 10.4, but can I upgrade back to my current version for free? Or is there some way of restoring the System Preferences without buying any new software?

Boot up from your Leopard install DVD by inserting it, restarting, and holding down C at boot time.
Then, follow the instructions to do an Erase & Install. This will completely wipe everything from the hard drive and reinstall everything from scratch.
If that sounds like overkill, keep this in mind: When buying a used Mac, there's no telling what sort of hacks, security holes, pirated software, keyloggers, password sniffers, or other even riskier stuff that may have been left on it by its previous owner. Using such a pre-owned Mac when you don't know its history is a Very High Security Risk. I would never even hook a used Mac up to the internet without a reformat and reinstall from the original install discs.

Mighty Mouse - Mouse/keyboard system preferences gone

Similar Messages

Maybe you are looking for