Mighty Mouse Problems - right click and battery changing

So I am on my second Mighty Mouse after the first one completely stopped working one day. Took it in to Apple and they gave me a new one.
This new one generally works ok (although right click fails every few days) but when I change the batteries and turn it back on the computer doesn't find it. I have to plug in my old Logitch and discover the Mighty Mouse and pair it again using the Logitech to control the cursor.
Then this morning the Mighty Mouse left click button stopped working so I turned it off and on again and once again, the computer didnt recognise the mouse and I had to go through the whole discovering and pairing process again using my other mouse.
Any ideas - I have checked the Bluetooth preferences and cant seen anything that I should be checking - it says my mouse is paired, connected and discoverable.
Any ideas or are Mighty Mouses just an ordinary piece of hardware - my experience so far has been ordinary!
By the way - I have a new (December 07) 24inch iMac and 10.5.2

Hey,
I just talked to German Apple telephone support. They fixed the problem for me! With fresh  installs of 10.7.5 the problem is that two files are missing that are needed for the mouse. In my case I could get them from another computer I own that ran Lion and did have the files. To get to the files you need do this:
Go to
/System/Library/LoginPlugins/BezelServices.loginPlugin
control-click that file and choose "show contents"
now in the finder window navigate to
Contents/PlugIns/
In this folder should be two files named
AppleBluetoothHIDMouse.plist
and
AppleHIDMouse.plist
If you don't find these files, you need to get them and put them in.

Similar Messages

  • Mighty Mouse lost right click and track ball 'click' in upgrade to Lion

    I upgraded my MBP to Lion at the community's recommendation and things have been going pretty well except for one major annoyance.  My mighty mouse, that worked perfectly on Snow Leopard no longer is able to right click or trackball 'click'.  If I try to do right click or use the trackball click all I get is a normal click.  I have no idea what to do, I've tried un-pairing the mouse and resetting it up, but the mouse seems to keep its unique identifier so when I re-pair it the computer recognizes it as a mouse it has seen before.  Though I'm not sure if being able to change this would matter or help.  Thanks for any input!

    Hey,
    I just talked to German Apple telephone support. They fixed the problem for me! With fresh  installs of 10.7.5 the problem is that two files are missing that are needed for the mouse. In my case I could get them from another computer I own that ran Lion and did have the files. To get to the files you need do this:
    Go to
    /System/Library/LoginPlugins/BezelServices.loginPlugin
    control-click that file and choose "show contents"
    now in the finder window navigate to
    Contents/PlugIns/
    In this folder should be two files named
    AppleBluetoothHIDMouse.plist
    and
    AppleHIDMouse.plist
    If you don't find these files, you need to get them and put them in.

  • Problem with Mighty Mouse in Right Click with Windows Vista Business

    Hi APPLE,
    I have a laptop, Sony Vaio, with Windows Vista Installed in it, i have purchased Apple Wireless Bluetooth Mighty Mouse. Sometimes I get no response when i right click...when i disconnect the mouse, then right click becomes active...but after using for long, right click becomes left click and left click acts normally. Could anyone tell me why this is happening, Can anyone tell me any fix/update/patch Apple has provided for Windows Vista. Is there any driver to configure Apple Wireless Mighty Mouse in Standalone Windows Vista.
    Vineet

    Hi, I have the same situation as u, I am also a viao laptop with Windows Vista Ultiamte, however, my BT might mouse never work at all. How did u do it ? Did u installed any software?

  • Mighty Mouse (BlueTooth) Right Click Problem

    Many times when I right click on the mouse, nothing happens.
    If I move the tab (on back on mouse) covering the blue tooth signal, apple reports mouse not found. The mouse then is found and my right click function works. I did this to reset the mouse to solve the problem but it does not make it a permanent solution.
    Do I have a defective mouse or is this a normal behavior with this mouse. I have used other mice before on Windows PC and no other wireless mice exhibits this behavior.

    "Laser illumination is considered more superior " ???
    Yes, I'm a 20+ year veteren of many Apple mice.
    Laser is clearly the superior choice over the optical in the MM.
    MM skips with detail moves, this Logitech mouse is precise and smooth.
    The Logitech mouse is wireless and has it's own combination charger stand/bluetooth(?) reciever that just plugs into a USB port. No batteries to worry about. Plus it's more egronomic and one can do a right click and a left click at the same time, unlike a MM.
    Apple's MM (in both forms) is clearly inferior, I've been through two already since they have been out. Being the Apple loyalist I am, I gave it a second try. But I need to get some work done without having to fight a greasy scroll pea and gunked up rollers with MM.
    In this hardware case Apple has been clearly bested, perhaps it was intentional, who knows? Apple's MM just plain under-performs.
    I'm almost positive you'll be happy with this Logitech brand/type of mouse.
    I'm sure if you shop around you can find it on sale, I did for about $30. A fraction of what a wireless MM would cost you.
    (no comp)

  • Mighty Mouse Wireless Right Click not working

    Hi Friends!
    I am having some difficulty getting my Right Click on my Wireless MM to work. I am aware that I need to keep my left finger off the mouse but it still does not seem to be working.
    Any thoughts ?
    Thanks !
    J

    Try replacing the battieries (or just taking them out and putting them back in). Forcing the connection between the Mighty Mouse and the iMac to break. Then put the new batteries, or the ones you were you using from before, in the MM.
    Re-link the Mighty Mouse to the iMac and try applying the settings for the right click function in System Preferences.
    Remember to mark as helpful or solved.
    -benny

  • Apple Mouse (mighty mouse?) Right clicks too often

    I have the Apple Mouse (former Mighty Mouse) and I have right click turned on.  The mouse is constantly doing "right click" when I click left.  I look and my finger is well to the left of the little scroll wheel.
    I thought "Oh maybe it's sensing the whole panel and I'm pushing in a funny angle" but no, I paid attention and  I was not.
    I'm just wondering, is this a common problem with this mouse?   Or is my particular mouse defective?

    I have a 2011 iMac and the batteries in my Magic Mouse need changing every couple of months.  In contrast, my wireless keyboard only needs a battery change every 10 months or so.  I bought an Apple battery charger and keep the spare set of batteries always charged.
    I think that is the way it is - mouse uses more juice than keyboard (or gets more use so runs down faster).  However, if it gets worse than 2 weeks life, it may be time to invest in a new mouse.

  • Wireless Mighty Mouse Looses Right Click Functionality

    I am using a new Wireless Mighty Mouse (about one month old) With new batteries.
    Since I started using it, the (secondary) right click would stop function after repeated use. After many frustrating trouble shooting attempts, I discovered that the Right Click will work again if the mouse is left idle for about 15 - 20 minutes.
    I will like to know if this is a defect that's inherent in the Mighty Mouse system, and if so, has anyone found a solution to this problem or is there a fix?
    Any input would be very much appreciated
    Mac G5. 2ghz DP   Mac OS X (10.4.8)  
    Mac G5. 2ghz DP   Mac OS X (10.4.6)  

    Unfortunately my experience suggests no. I'm on my 5th (or is it 6th?) wireless Mighty Mouse now, and they've all behaved just as you described. The latest replacement was only a week ago. I suspect the only point in replacing it further times would be to demonstrate that you've tried all you can. As far as I can tell, my only recourse at this point is convincing Apple to refund me, which is a shame because I like the scroll ball design.
    I should note that I'm in Australia, in case stock has been slower to update here, but it shouldn't make a difference...
    I've noticed that the problem seems to occur a lot more frequently under hot conditions - room heater on, hot hands etc. Could it still think the left button is being touched because it's warm and/or sweatier than usual?

  • Mighty Mouse problems - dead click

    Recently purchased a Apple Mighty Mouse. Works fine until the click is no longer read by the computer. Usually when switching apps. The cursor moves fine and it causes the dock to appear and react correcly when moved over it but nothing can be clicked or activated.
    Even if I have another input source plugged in (Wacom, trackball) these no longer react to clicks eaither. Most of the time I'm running without them.
    The keyboard also seems to be in-active at that time.
    Is this a known problem or conflict of some type? The only solution seems to a full power reset since the I can't bring up force quit with keyboard.
    Thanks.

    Hi Scott
    I bought a mighty mouse shortly after they were released and I found after a while, that if I used Button 4 [the squeeze button on the side] as the Application switcher then the left and right click wouldn't be recognised until the computer was restarted.
    The only soultion I have is to not use Button 4 for anything and stick to Command & Tab for using Application Switcher.
    Hope this helps
    LG

  • Magic Mouse No Right Click and 10.10.1

    Updated to the latest version of OS X, and now both of my Magic Mice won't register a right (contextual) click. Is this a known bug? it's obviously not a device problem, given that neither of my mice have a problem. I'll have to look and see if my laptop is on the previous version and is exhibiting the same problem.

    Got imac 27" i7 yesterday loaded , migrated among other things clicked mouse preferences under system prefs and also clicked to enable right click on new magic mouse.  Ran fine until next day, got a hole bunch of keychain authorization accesses requests for icloud and it's products, everyone I had clicked the day earlier for the initial setup on this new imac, but also more to the point the right click on the new magic mouse was now not functioning.  So I check the mouse perfs again, and the right click was checked so unchecked and re-checked, but no fixes , still right click not functioning, right click was acting like normal left click on any browser links.  So I simply shut down, ( the iconic fix all solution no one wants to believe in ) and upon reboot functionality of right click on magic mouse came back. So I'll call it a fluke, if it comes back randomly I'll assume it's a possible bug in osx 10.10.2  as well as possibly 10.10.1?  Anyway that's it so far.

  • Mighty Mouse not right clicking

    I have noticed that my mighty mouse will NOT work on the right click function, particularly when I am on the desktop. If I am working in mail for instance, it WILL however allow me to right click .
    Are there settings or preferences that may have gotten corrupt?
    When on the desktop, if i rightclick, i get s slight pause, then the desktop re writes itself, yet no right click menu will appear.

    It seems like something is up with your Mac OS X.
    Did you try left click and ctrl before you bought your mighty mouse? Or did you always have your might mouse?
    Please try the following...go to applications>utilities>disk utility
    select your volume and fix permissions, then on the right click on check disk. This will take a couple minutes.
    Let me know if you get any errors. Those red type things
    Or did you do this already?

  • Bluetooth Mighty mouse wont right click

    I have set the right mouse button to 'secondary' in the preferences, however i still have to press ctrl to access the right mouse menu.
    How can I correct this?

    Hello,
    In addition to checking the setting as already proposed, do check how you are using the mouse.
    The Mighty Mouse uses sensors to detect which button you mean to press.
    There is actually only one button. So, based on where your fingers are, it will determine which button you meant to press.
    As long as you have a finger over the left button location, anything you press will be a left-button / primary button click.
    So, as a test, raise your left finger about an inch above the surface before you right-click. See if that makes a difference.
    The mouse could just be reading your left finger and assuming you mean a left click.
    I have to deliberately remove my left finger from the mouse anytime I want to right-click. Otherwise I always get a left-click.
    I hope this helps.

  • How do I change my mouse to right click for copy and paste

    How do I change my mouse to right click for copy and paste?

    OK, what mouse are you using?  Brand, model?  Your right click should register as a right click unless that has been overridden by a preference pane.  If your Mouse preference pane looks like this, your right click should be the equivalent of a control-left-click on a Mac.

  • Wireless Apple Mouse Won't Right Click and how do I change the buttons

    Mouse won't right click and I want to swap the right and left button functions. How do I do this?
    Thanks

    Mouse won't right click and I want to swap the right and left button functions. How do I do this?
    Thanks

  • I can't open Lightroom files in Photoshop CC 2014.  When I Right Click and select Edit In Photoshop CC 2014 nothing happens.  I have uninstalled CC 2014 and Lightroom but no change.

    I can't open Lightroom (5.7.1) files in Photoshop CC 2014.  When I Right Click and select Edit In Photoshop CC 2014 nothing happens.  I have uninstalled CC 2014 and Lightroom but no change.

    What happens if you start up PS CC 2014, first, and then try the Edit In?
    Here are a few things to try related to a similar, but not exactly the same problem:
    http://helpx.adobe.com/x-productkb/multi/edit-photoshop-command-missing-photoshop.html

  • Magic Mouse-Right click and left click reversed?

    Hello! Thanks in advance for any info you can provide regarding my problem. My wireless keyboard and magic mouse recently has been disconnecting from Bluetooth. A few days ago they both quit, and after a call to apple tech support, I tried everything, including re-loading my system software(Mac Pro, Snow Leopard 10.6.2) When my keyboard and mouse finally came back up, when I de-selected the right click, the mouse wouldn't click. The cursor moves around, but no click. I have to plug in another mouse and select right click, and then the mouse will click, but the right and left click are reversed.
    At one point, when plugging in an old wired mouse, I was able to select whether I wanted to enable the right or left click, and when I selected left click, the mouse quit clicking. I can't seem to get thatoption now with a wired mouse, and that might not even be related.
    Can anyone help! I'd like to get my Magic mouse working correctly!
    Thanks for all your help!
    Mark S.

    Hello ms:
    Welcome to Apple discussions.
    Try trashing a preference file (com.apple.bluetooth.plist) and restarting.
    Barry

Maybe you are looking for

  • Custom Reports migration during R12 upgrade

    During upgrade from 11i to R12, how do I understand from RD50s as to what would change in my custom reports in Financial, OM and SC modules? Is there a metalink document which can help me in making changes to my new data warehouse and ETLs? Please ad

  • Lomboz J2EE View not working

    Lomboz J2EE View not working always give such type error java.lang.NoClassDefFoundError: org/apache/jasper/Options      at com.objectlearn.jdt.j2ee.core.Project.initContainers(Project.java:370)      at com.objectlearn.jdt.j2ee.core.Project.init(Proje

  • Z10 and Q10 frequently asking for Office 365 password

    I have an AT&T Z10, and a client has a Verizon Z10 and 2 Verizon Q10s.  Both of us use Office 365 as our email service.  With the lack of BB10 support in BBCS (Blackberry Cloud Service for Office 365) I was forced to set up all these devices on Activ

  • 3D Force vector plot

    Hi This might be a very easy thing to do but i can't seem to manage it. I am currently using Labview 8.5 and attempting to represent data acquired from a 3-axis force sensor as a single vector. The vector should begin at the origin with its magnitude

  • Is it possible to have a hard return in a cell?

    is it possible to have a hard return in a cell?  looking to have multiple lines inside the same cell without it wrapping.