Mighty Mouse sudden scroll issues on Mavericks

My bluetooth Mighy Mouse (a little ancient, but still works well for me) was functioning perfectly till suddenly the vertical scrolling increased speed rapidly, followed shortly by the horizontal scrolling failing completely. This all happened after an episode of letting my battery die to the point of power down, me plugging in the Mac, giving it a few minutes to boot only to find everything very slow, then doing a restart. Upon start up, my Mac returned to being its normal speedy self, but this Mighty Mouse issue occured.
The settings in preferences -> mouse are ''lowest scroll speed'' and "vertical and horizontal" scrolling
I have reset the SMC and PRAM. This did nothing.
Any suggestions???

Thanks for the suggestion, I didn't know of that preference item.
But changing this did not help, in fact it seems to coincide with the System Preferences>Mouse>Scrolling (change one, and the other changes too). And changing this scrolling setting anywhere from low to high doesn't seem to change my current scrolling speed. It is unregulated.
I should also mention that I have two bluetooth Mighty Mice and one corded Mighty Mouse. All of these have super-fast vertical scrolling and NO horizontal scrolling.
Also, when resetting the PRAM, it is an obvious restart. When resetting SMC, is there any visible/audible cues that the reset has occured? I just want to rule these two possible solutions out.

Similar Messages

  • Mighty Mouse stopped scrolling

    I have an Intel iMac with Tiger. Recently the scroll ball on my Mighty Mouse stopped scrolling. Nothing happens at all when I move it. I went to the preferences to see if a setting was wrong. Most of the mouse options have the word "Expose" (I can't figure out how to do the accent mark) so I looked that up. It seems Expose is the reason the windows sometimes fly apart for no known reason. I wish I could turn that off, I hate it. Anyway, I tried different mouse options and the scrolling hasn't come back.
    Thanks for any help offered.

    I will try cleaning the scroll ball like that.
    I want to be able to scroll, but I don't want the windows to suddenly jump apart. I don't even know what button makes that happen. I didn't know Exposé (got the accent, thanks) existed until today. Can you tell me exactly what setting gets rid of Exposé but not scrolling?

  • Mighty Mouse wont scroll?!?

    Hey guys... for some reason my Mighty Mouse quit scrolling down today. It will still scroll up but not down. I can't feel anything when I scroll down that makes it seem like its catching something, so I am cluecless. Any ideas?!

    Use this article first: http://docs.info.apple.com/article.html?artnum=302417
    I have to clean mine a couple of times a month, when the above cleaning method doesn't work I resort to more drastic measures. I use a small amount of Rubbing Alcohol on a clean old t-shirt to clean the ball and then blow it out. I have done this many times in the last year, works well with no ill affects to the mouse.

  • Mighty Mouse will scroll down but not up.

    All of a sudden my mighty mouse won't scroll up. It will scroll down, left and right but not up. The mighty mouse is about 6 months old and has worked fine on my old Dual 1GHz G4 MDD.

    your mighty mouse should have a 1yr warranty on it, take it to an apple store and let them know what the problem is.
    as I have never used a mighty mouse I cant offer advice, other than perhaps its dirty inside and maybe you could clean it...
    How to clean your Mighty Mouse
    http://docs.info.apple.com/article.html?artnum=302417
    and another site with photos
    http://www.flickr.com/photos/shirster/67089152/

  • Mighty Mouse Stops Scrolling

    I have a Mighty Mouse which suddenly stops scrolling up (and sometimes down). It works great some of the time.
    Anyone else have this problem? Nothing similar popped up when I searched.

    Have a look under 'More like this' to the right on this page!
    It probably needs a clean:
    How to really clean your Mighty Mouse (with caution!):
    http://support.apple.com/kb/HT3226?viewlocale=en_US
    and:
    http://web.mac.com/karelgil/iWeb/MacWebSite/MightyMEng.html
    http://www.linklink.co.uk/apple-computers/cleaning-inside-and-dismantling-the-ap ple-mighty-mouse/

  • Mighty Mouse not scrolling down

    Hello. I have a problem with my mighty mouse. Suddenly it will no longer scroll downwards with the small ball when view web pages/itunes etc., although it will still scroll up. Does this have anything to do with the latest security update that i recently installed? Any help would be appreciated.

    I had a similar problem and it turned out that the moving parts inside were just dirty.
    I used a slightly damp face cloth and pushed hard against the ball and rolled it around for a few seconds.
    This cleaned the bit of dust or whatever was interfering, and it has worked fine since.
    I read elsewhere to use rubbing alcolhol instead of water -- but I used a very damp cloth and that did the trick.
    Good luck!
    Stephen

  • Mighty Mouse No Scroll Down

    I've tried playing with this problem using the Mouse Preferences, every combination of options I can find, but my Mighty Mouse now (suddenly) refuses to scroll DOWN. It scrolls UP but now DOWN. It even scrolls side to side if I select that option, but NO down. Ummm?
    Anyone else been having this same problem.

    *Hi cloudmountain, Welcome back* to Apple's Users Help Users Forums.
    Most likely it just needs cleaning. Lint free cloth, slightly damp w water or alcohol. Unplug and vigorously and firmly roll the scroll ball around. Blowing it with canned air can help too.
    Search the forums on "clean mouse" or "scroll." There is an Apple Support page as well.
    Good Luck, JP

  • Mighty Mouse bluetooth: scroll wheel in Vista 64 bit doesn't work

    I Installed Vista 64 bit on my Mac Pro.
    My bluetooth mighty mouse has been recognized as an hid mouse. It works but the scroll wheel.
    I tested on osx and it works, so it is not dirty or broken.
    I tried to install the drivers from my leopard dvd but I receive an error message during the installation.
    I downloaded the bootcamp update for 64bit systems but when I try to install it, it tells me the software to be updated is missing.
    I tried to use a recent leopard dvd a friend gave but it tells me that my system doesn't support 64 bit softwares (is a late 2007 Mac Pro).
    Is there anyone who knows the answer?

    http://support.apple.com/kb/HT1999
    http://store.apple.com/us/product/MB576Z/A
    You have to have a pre-2008 Mac Pro I take it.
    (might want to include more in your profile)
    First you need to install 64-bit drivers from Apple off 10.5.4 or later DVD or from a 2008 Mac Pro.
    Might even be drivers for generic BT mice available somewhere??
    http://support.apple.com/kb/HT1845
    http://www.apple.com/downloads/macosx/apple/application_updates/bootcampupdate21 forwindowsvista64.html
    I think you'll need to uninstall your current Apple services and device drivers, restart and then go with BC 2.x for 64-bit.

  • August 08 imac. Mighty Mouse wont scroll down.

    Hey, I have August 2008 iMac and since about Febuary the mighty mouse will not scroll down. I havent been using it much (Had major pc problems... Been working on my pc alot.) and am moving it to somewhere where it will get used more.
    How can I get the wheel to scroll down again?
    I have tried unplugging it and wiping it on my shirt, and rolling the scroll ball on a sheet of paper upside down. But those didnt fix the problem.

    The mouse ball is dirty, you need to use a damp towel and vigorously rub the mouse's ball for at least 30 seconds. Another technique is getting a clean sheet of paper, placing it on a flat surface, turning over the mouse and vigorously rolling the ball on the paper.
    If that doesn't fix it (it should!) then it is covered by your original warranty so contact Apple or take it to an Apple Store for replacement.
    Regards,
    Roger

  • Mighty Mouse just scrolls up

    Hi,
    I just got a used (looks like new) bluetooth mighty mouse. The problem is the scroll ball only scrolls up. I set it to 360° and all other options. No effect.
    Another thing is I can't configure the mouse as a bluetooth device. The mouse works (except the scrolling) an when I hit the bluetooth icon it is shown. But when I search for bluetooth devices oder even when I use the mouse configuration menu an click on "configure bluetooth mouse" it will not be found?
    Does anyone know this funny stuff?
    By, Jazzy

    You must clean it.
    Emphasis on rubbing vigorously.
    Click here for information.

  • Wired Mighty Mouse lacks Scrolling Options

    Hello,
    Is there a way to enable zoom-scrolling on a wired Mighty Mouse?
    I was reading Mac Help on mouse settings and noticed a feature that I've never noticed before: Scrolling Options. Help claims that this feature allows to customize the scroll-ball behaviour, including 360 degree scrolling and zoom-scrolling. Alas, I failed to find this feature in my Keyboard & Mouse pane.
    I searched on Google, and it seems that this feature was introduced in the new driver that ships on a CD with the new wireless Mighty Mouse. Look here: http://tinyurl.com/pyx7s.
    Will this new driver work with the wired Mighty Mouse? if yes, where can I get this driver?
    —barmalutka
      Mac OS X (10.4.7)  

    The Zoom function appears to be giving the wireless MM access to the Universal Access System Preference "Zoom" feature.
    The MM already has 360° scrolling. I sense that the pulldown menu you see in the System Preference Pane for the new wireless MM probably gives you control to limiting the direction of the scrolling to left-right, or up-down and possibly diagonally.
    Who knows, if we are lucky the new MM System Preferences may appear in a future OS X update.
    Until then these 3rd party mouse System Prefs are available;
    SteerMouse
    USB Overdrive

  • Wireless mighty mouse horiz. scroll for some software

    The horizontal scroll on my new wireless mighty mouse seems to work for some programs (Safari) just fine; for others (Melody maker) only on the scrollbar and for others (MS Word) not at all. Any ideas?
    Powermac G4   Mac OS X (10.4.8)  

    Yes you need to install the software to allow your Mac to properly recognise all the features of the BT Mighty Mouse.
    I've got the exact same setup and just obtained a Wireless Mighty Mouse - all I had to do was install the software on the CD, reboot (the first reboot will take a little while), and follow the instructions on either the CD or one of the small enclosed booklets that you should have in your box.

  • Mighty Mouse not scrolling up

    I have the Wireless Mighty Mouse, and a couple days ago, I noticed that it won't scroll up. The ball will go everywhere, and it's all responsive that I see- except for when I want to roll up. I checked, and everything else seems to be working perfect. I also rolled the ball on an piece of paper, and clean it up. Still nothing. If anyone knows what to do, please let me know!

    I just bought a magic mouse and downloaded the Better Touch Tool software to expand it functionality. Has anyone done this since I have been able to do ONE functional change to the Magic Mouse, but now I can not find it do to another changed.
    Help

  • Wired Mighty Mouse cannot scroll down.

    I have had my wired mighty mouse since 2007. Every once in a while the scroll would stop working for a second but once i rolled it around, it would start scrolling again. Now my mouse has not been able to scroll down all day. I have read online that if you roll the scroller around on paper, it will clean the roller and it should start working again. I tried this many times and my mouse is still not functioning. Is there a way to fix this or should i just purchase a new one?

    You need to open & clean. Watch this video.
    http://www.veoh.com/browse/videos/category/technology/watch/v378809PrA5a3pg
     Cheers, Tom

  • MIGHTY MOUSE WONT SCROLL DOWN!!!!

    is there anyway to reset the mighty mouse????? and has anyone else had this problem

    Click here and follow the instructions.
    (32217)

Maybe you are looking for

  • Export Camera Raw sidecar XMP from DB

    Hi I forgot to change my options for xmp sidecar files in bridge last time I installed it. For a good two months it's been saving xmp data in the camera raw databse instead of in sidecar XMP files. Now I need to move a whole bunch of raw files to a n

  • Second SATA Drive Read Only

    Need some help: I took my SATA Drive out of my Windows Computer (NTFS) 250GB, and put it into the second SATA bay of the G5. It had one jumper on the 3rd setting. The G5 found it and it can read fine, but it is read only. nothing i do can erase, form

  • HTTP to Enterprise Services.

    We have a scenario - HTTP to Enterprise Services.We have Sales order Enterprise service residing in SAP Ecc6.0 system. We have imported the Standard XI content for sales order given by SAP into the repository.We are sure that we need to use WS adapte

  • Refreshing TableView (or recall CellValueFactory)

    Hi, I have a similar use case as in my code sample: In my TableView I have a cell value factory which returns a value, which is dependent on some other values. When this other value changes, I want to refresh the TableView (or recall the cell vallue

  • SBH52 Power Button Not Working

    Hi, I recently bought SBH52; it worked for two months. The power button is not fucntioning at all. I tried holding for 1 min but still nothing happens. I am worring that if the battery drains it will never function anymore therefore I am charging the