Mighty Mouse tracking issue while downloading files

Hi everybody ...
I'm the owner of the Wireless Mighty Mouse... For about 2 months I'm recognizing a strange behavior.
When I do start a download via Safari (I'm connected to the Internet via Wifi 54Mbits (2,4 GHz)) the mouse tracking start to bucking. During the download no fluent motion occurs. After the download finished the bucking stops and the tracking flows seamlessly. Does anyone have the same problem? I'm not quite sure what the exact problem is but could this behavior result from the connectivity frequency of bluetooth and wifi? And please don't tell me to reset my keyboard or my mouse. I already did that. I also updated to the latest official software update for bluetooth.
Please help me.
Thx destinationCloud

Hi,
I have the same problem, but mine usually shows up when I have MS Word opened for a while. It is as if there is some other process cycling that interferes with the tracking. Sometimes it shows up as a major lag (cursor stutters and moves a little bit for a large hand motion) or the cursor jumps way across the screen. It isn't always when MS Word is opened, but more frequent when it is (occasionally with Pages too). Changing batteries doesn't help, changing surfaces doesn't help. After some time, the problem resolves and mouse moves smoothly again, for a while. This has been more of a problem in the last few months than before.... was the Bluetooth driver changed? Does it have anything to do with a cache that is used before changes are saved?
Where is the Bug Report link... I can never find it. Just put it right on the Support page please, BIG.
Message was edited by: dammittakethealias

Similar Messages

Issue while downloading file in .CSV format

Hi,
I need to download the file in .CSV format.
I hade used FM SAP_CONVERT_TO_CSV_FORMAT and then used GUI_Download.
Now when I am opening file which is downloaded, it gives all the data in a single column. If there are 5 fields in my table, the generated file gives the data of all the 5 fields in a single column.
Could you please help?

Hi try wi th the following code.
TYPE-POOLS : truxs.
DATA: t_file TYPE STANDARD TABLE OF type_file.
data:t_conv_data TYPE truxs_t_text_data.
CALL FUNCTION 'SAP_CONVERT_TO_TEX_FORMAT'
EXPORTING
    i_field_seperator          = ', '
TABLES
    i_tab_sap_data             = t_file
CHANGING
   i_tab_converted_data       = t_conv_data
EXCEPTIONS
   conversion_failed          = 1
   OTHERS                     = 2.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename                = 'C:\TESTCSV.CSV'
    filetype                = 'ASC'
    write_field_separator   = ' '
TABLES
    data_tab                = t_file
   fieldnames              = names
EXCEPTIONS
    file_write_error        = 1
    no_batch                = 2
    gui_refuse_filetransfer = 3
    invalid_type            = 4
    no_authority            = 5
    unknown_error           = 6
    header_not_allowed      = 7
    separator_not_allowed   = 8
    filesize_not_allowed    = 9
    header_too_long         = 10
    dp_error_create         = 11
    dp_error_send           = 12
    dp_error_write          = 13
    unknown_dp_error        = 14
    access_denied           = 15
    dp_out_of_memory        = 16
    disk_full               = 17
    dp_timeout              = 18
    file_not_found          = 19
    dataprovider_exception = 20
    control_flush_error     = 21
    OTHERS                  = 22.

Mighty Mouse tracking issue

I have a new MBP, and I purchased the MM at the same time. Even with the settings all bumped up (tracking, etc), the mouse would not track with the cursor. Specifically, to get the cursor to move an inch, I had to move the mouse perhaps 3 inches. When I took it back, I was told it was supposed to work that way, that I was moving it too slowly and I needed to whip it around to get tracking on track.
So, I returned it and got a bamboo pen thingy. It works just fine, but I miss having a mouse. So, I'm asking, are the MM's really supposed to work that way? The slower I go the more I have to move it to get the cursor to move?
Appreciate any feedback, opinions, facts, beer, whatever you might have to help.

The problem is the acceleration curve algorithm in OS X. It ***** and people have been complaining about it for years. Older versions of OS X had a normal curve but at some revision they changed it (years ago). It's hilarious watching potential customers in the apple store pick up that mouse and drag it, pick it up, drag it, pick it up, etc. It just doesn't bother most people I guess. Thank god for the bluetooth trackpad or I wouldn't have bought this iMac, it would have been unusable.
Apple engineers, if you're listening, would you please put a check box in the mouse prefs to allow users to select a curve profile that's identical to what's used in every other OS, some of us just can not adapt to the OS X default curve profile.

Computer slows down while downloading files using Safari version 4.0.3

I experience some performance issues while downloading files from the internet.
The system performance/responsiveness is perfect until starting the download process.
E.g. opening the finder takes noticeably more time.
However, the worst is moving the mouse (bluetooth mighty mouse). It's hard to explain, but during a download there's a lag which could be compared to decreasing the mouse sensitivity to a minimum.
Maybe someone could help me with that...
Thanks a lot!

HI and Welcome to Apple Discussions...
Check to see how much free drive space there is on the MacBook.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. *Make sure you always have a minimum of 10% to 15% free disk space at all times.*
If you need to free up disk space, go here for help.
http://www.thexlab.com/faqs/freeingspace.html
Could be an underlying issue with the hard disk. Boot from your install disk and run Disk Utility.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
Carolyn

HT201272 Had some wifi issues while downloading an album. First 3 tracks... sound stops way early but continues the count. How can I tell iTunes to redo the first 3?

Had some wifi issues while downloading an album. First 3 tracks... sound stops way early but continues the count. How can I tell iTunes to redo the first 3? Any way to just fix it?

Hey davma1
All you need to delete the songs then go through the process of downloading the past purchase again.
Deleting files from the iTunes library and your computer
http://support.apple.com/kb/ht3842
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Mighty Mouse Track Ball

Does any one else have issues with the mighty mouse track ball?? My does not work half the time. When it is working it will only work in one direction half of that time.
Does anyone know of ways to clean it?? Or keep this from happening?
Cameron
MBP 15.4" Mac OS X (10.4.8)

I've read all the posting about this..in recent months I've been cleaning the track ball 6,7,8,9....times every day. I had planned to buy a wireless Mighty Mouse but not now, it'd be cheaper to sit in front of my Mac bashing my testicles with a mallet for the same effect. Apple, this is an utter design disaster. Like Joachim says, why not a mouse we can open and clean easily, or a larger, more robust track ball mechanism? I'm off to but a mouse by anyone but Apple...
G5 i-Mac Mac OS X (10.4.9)

Error occurred while downloading files from Administration Server...

Hi guys,
If i already have my application deployed and exploded in ../tmp/_WL_user , when I restart the managed server it will try to download again the files from the upload directory in the Administration Servers? (I'm using stage mode).
Sometimes I got the following error:
Caused By: java.io.IOException: [DeploymentService:290066]Error occurred while downloading files from Administration Server for deployment request "0". Underlying error is: "null"
and I already have the war exploded in /tmp/_WL_user
the staging mode is not only for the first deployment? when i don't have the war exploded in /tmp/_WL_user?
I've some confusion related to the process or deployment/startup of the managed servers.
Thanks

Hi,
when you get following error * DeploymentService:290066 * then that means
A service on the machine is preventing the WebLogic Server remote instance from downloading the configuration file. This can be Hosts Intrusion Prevention (HIPS) agents or any other agent causing this issue.
Disable the agent interfering with the download process to fix this issue.
Regards,
Kal

How to create column header text while downloading file

How can we create column header text while downloading file using function GUI_DOWNLOAD(in SAP Release 4.6c) because there is no FIELDNAMES parameter in
4.6c version.

Hii,
Check this sample code. I have called GUI_DOWNLOAD twice. Onetime to download header of table and next time data of table
REPORT z_file_download.
DATA: w_name(90) TYPE c.
DATA:
BEGIN OF fs_flight,
    carrid   LIKE sflight-carrid,
    connid   LIKE sflight-connid,
    fldate   LIKE sflight-fldate,
    price    LIKE sflight-price,
    currency LIKE sflight-currency,
END OF fs_flight.
DATA:
BEGIN OF fs_head,
    carrid(10) TYPE c,
    connid(10) TYPE c,
    fldate(10) TYPE c,
    price(10) TYPE c,
    curr(10) TYPE c,
END OF fs_head.
DATA:
t_head LIKE
   TABLE OF
         fs_head.
DATA:
t_flight LIKE
     TABLE OF
           fs_flight.
fs_head-carrid = 'CARRID'.
fs_head-connid = 'CONNID'.
fs_head-fldate = 'FLDATE'.
fs_head-price = 'PRICE'.
fs_head-curr   = 'CURRENCY'.
APPEND fs_head TO t_head.
SELECT-OPTIONS:
s_carrid FOR fs_flight-carrid.
START-OF-SELECTION.
SELECT carrid
         connid
         fldate
         price
         currency
    FROM sflight
    INTO TABLE t_flight
   WHERE carrid IN s_carrid.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
*   BIN_FILESIZE                  =
    filename                      = 'D:\flight.xls'
   FILETYPE                      = 'ASC'
*   APPEND                        = ' '
    WRITE_FIELD_SEPARATOR         = 'X'
*   HEADER                        = '00'
*   TRUNC_TRAILING_BLANKS         = ' '
*   WRITE_LF                      = 'X'
*   COL_SELECT                    = ' '
*   COL_SELECT_MASK               = ' '
*   DAT_MODE                      = ' '
*   CONFIRM_OVERWRITE             = ' '
*   NO_AUTH_CHECK                 = ' '
*   CODEPAGE                      = ' '
*   IGNORE_CERR                   = ABAP_TRUE
*   REPLACEMENT                   = '#'
*   WRITE_BOM                     = ' '
* IMPORTING
*   FILELENGTH                    =
tables
    data_tab                      = t_head
EXCEPTIONS
   FILE_WRITE_ERROR              = 1
   NO_BATCH                      = 2
   GUI_REFUSE_FILETRANSFER       = 3
   INVALID_TYPE                  = 4
   NO_AUTHORITY                  = 5
   UNKNOWN_ERROR                 = 6
   HEADER_NOT_ALLOWED            = 7
   SEPARATOR_NOT_ALLOWED         = 8
   FILESIZE_NOT_ALLOWED          = 9
   HEADER_TOO_LONG               = 10
   DP_ERROR_CREATE               = 11
   DP_ERROR_SEND                 = 12
   DP_ERROR_WRITE                = 13
   UNKNOWN_DP_ERROR              = 14
   ACCESS_DENIED                 = 15
   DP_OUT_OF_MEMORY              = 16
   DISK_FULL                     = 17
   DP_TIMEOUT                    = 18
   FILE_NOT_FOUND                = 19
   DATAPROVIDER_EXCEPTION        = 20
   CONTROL_FLUSH_ERROR           = 21
   OTHERS                        = 22
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                = 'D:\flight.xls'
      filetype                = 'ASC'
      append                  = 'X'
      write_field_separator   = 'X'
    TABLES
      data_tab                = t_flight
    EXCEPTIONS
      file_write_error        = 1
      no_batch                = 2
      gui_refuse_filetransfer = 3
      invalid_type            = 4
      no_authority            = 5
      unknown_error           = 6
      header_not_allowed      = 7
      separator_not_allowed   = 8
      filesize_not_allowed    = 9
      header_too_long         = 10
      dp_error_create         = 11
      dp_error_send           = 12
      dp_error_write          = 13
      unknown_dp_error        = 14
      access_denied           = 15
      dp_out_of_memory        = 16
      disk_full               = 17
      dp_timeout              = 18
      file_not_found          = 19
      dataprovider_exception = 20
      control_flush_error     = 21
      OTHERS                  = 22.
IF sy-subrc EQ 0.
    MESSAGE 'Download successful' TYPE 'I'.
ENDIF.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Abhijeet

HT2845 why doesn't my mighty mouse track ball scroll up or down vertically?

why doesn't my mighty mouse track ball scroll up or down vertically?

Hi:
New ones are not that expensive, but I would try running it up and down (vigorously) on microfiber cloth or a towel or something.
If that does not fix it...yes I would buy a new one. I like wireless ones anyway
Barry

Firefox 4 hangs while downloading files, sometimes get an error saying Script: chrome://mozapps/content/downloads/download.xml:68 is busy or may have stopped responding, how can I disable this script?

While downloading files Firefox 4 freezes (started with 3.5) and sometimes I get a window that says Script: chrome://mozapps/content/downloads/download.xml:68 has stopped responding or is busy and asks if I want to stop script or ignore. I have looked through about:config and don't see a way to disable the script and keep it disabled.

That is a problem with an AVG extension (Tools > Add-ons > Extensions)
See:
* [[Troubleshooting extensions and themes]]

Japanese character problem while downloading file to application server

Hello All,
We are facing a strange problem while downloading a file to application server when file contains japanese text.
We are downloading vendor and customer information in a flat file format on application server. When the login language is EN program show ouput in a properly formatted manner.
When the login language is JA (japanese) program does download file with customer vendor data. I can see the description is japanese language but the formatting is gone for a toss.
We are facing similar issue with other programs downloading files on the application server.
I am using OPEN DATASET........ENCODING DEFAULT. and working on unicode enabaled ECC 6.0 system
Quick help appriciated.
Thanks!

Hi
Sometimes this also happens because of your desktop setting.Make sure that your OS also supports the JAPANESSE language.
Ask your technical support team to enable them in your desktop.
Thanks & Regards
Jyo

Mighty Mouse Tracking Ball

The tracking ball on my Mighty Mouse works side-to-side and up, but not down. It feels as though there's some debris in the way preventing it from letting me scroll down.
Is there a way to clean it with breaking it?
Can I take it apart safely?
Any reponses would be greatly appreciated.
Thanks,
Stephen
17" iMac IDC iSight Mac OS X (10.4.5)

Stephen,
This has a tendency to happen a lot---for some reason it attracts dirt like anything.
Just simply get a damp, lint-free fabric and rub it vigorously on the scroll button, making sure you let it roll freely as you do so (to get the entire ball on all sides)---right side up first, so you can see the smudge building up on the sides where the button meets the rest of the casing. You will see some particles get trapped in this a lot. Scrape off all the gook from there...
Let it rest for a minute or two, to completely dry it from the dampness caused by the fabric, and then turn it upside down while rolling the button to free any other remaining residue...
Here's the link fron Apple's Support pages:
http://docs.info.apple.com/article.html?artnum=302417
Hope that helps

Mighty Mouse track ball button

I have been using Snow Leopard for a while and one of the things that I like the most is that I can choose what I want to see in my screen when I move my cursor to the lower right or left corner.
I have it set up as to SHOW ALL WINDOWS if I move my cursor to the lower right corner, well after I moved to LION that is no loger an option, instead of showing all windows open all it shows are the open windows open of the same application only, How can I set it up the way it was before, is there like a script or something.
also can it be set up so when I click the tracking ball on my Might Mouse to show ALL windows and not just the program windows?

I've read all the posting about this..in recent months I've been cleaning the track ball 6,7,8,9....times every day. I had planned to buy a wireless Mighty Mouse but not now, it'd be cheaper to sit in front of my Mac bashing my testicles with a mallet for the same effect. Apple, this is an utter design disaster. Like Joachim says, why not a mouse we can open and clean easily, or a larger, more robust track ball mechanism? I'm off to but a mouse by anyone but Apple...
G5 i-Mac Mac OS X (10.4.9)

Mighty Mouse Scroll Issue

I have a strange problem with my mighty mouse. On my Mac I have 2 separate logins - both with admin. The scroll up and down works with one of the logins but not the other. I have tried over and over with both logins, turning the scroll on and off but it remains the same. It's obviously not a mouse problem - does anyone know what may be causing this?

I found this : Mouse won't scroll for one User but works for another : answer posted by a knowledgeable user.
While it doesn't match your issue exactly, its similarity indicates a possible solution. Easy enough to try anyway.

Mighty Mouse button issues

Hope somebody can help.
I have a iMac G5 with Mighty Mouse. I started using a Belkin Bluetooth mouse and keyboard for a while, now when I try using my Mighty Mouse I cannot get buttons 3 & 4 to work correctly. The correct pref pane is there and I have set tasks to each button but they do not repond.
I cannot find a prefernce files for mouse, any suggestions ?
Ta

Might want to see if you can extract the Mighty Mouse installer from the disks which came with your computer using this company's Pacifist software:
http://www.charlessoft.com/
And use it to reinstall the Mighty Mouse drivers.

Mighty Mouse tracking issue while downloading files

Similar Messages

Maybe you are looking for