Mighty Mouse wireless: changing the setting of the low battery indicator

Hi,
It seems that the low battery indicator for the wireless mighty mouse appears when the battery level goes under 30%. Is it possible to change this setting, e.g. make it occur when it passes the 5% of remaining battery?
Thanks!

I fully agree with Tibo. I'd like to change this setting as well.
This low battery warning may be a good heads-up for someone who feeds their MM cheap batteries but, I got two Energizer AA Lithium batteries in mine and it literally "keeps going and going..." consistently for weeks while constantly receiving the annoying low battery warning.
Come on, users a perfectly capable of deciding what is fair-warning on the life of batteries we feed the MM.

Similar Messages

Apple Bluetooth / Wireless Keyboard Low-Battery Indicator?

Hi All,
Does the iPad show a low-battery indicator when the Apple wireless keyboard is running out of juice? I know OS X is supposed to, but not sure about iOS. I plan to use my keyboard for meetings and depositions where I'd be in a tight spot if I ran out of juice unexpectedly.
Thanks.

Hi,
No, but, "The Apple Wireless Keyboard requires just two AA batteries — one less than the previous model. And its intelligent power management system conserves battery life. *So when you’re not using the keyboard, it automatically powers down. The instant you start typing, it turns back on*. Use the on/off switch when you're away from your computer for a long time."
From here. http://store.apple.com/us/product/MC184LL/A?mco=MTY3ODQ5OTY
Carry a spare set of AA batteries just in case.
Carolyn

I inadvertedly changed a setting where the top of my screen no longer shows the apple logo in the top left or the clock and wifi status and strength on the top of the screen, how can I get it to show both of these things again like it used to?

I inadvertedly must have changed a setting where the apple logo and files and things that used to be in the top left corner of the screen are no longer there as the clock and wifi status and other installed settings used to show up in the top right hand corner of my screen. When I move my mouse to the very top of the screen they drop down but when I move my arrow away from the very top of the screen they both disappear again. So I was wondering how can I get it to revert back to the way it used to be? I hope this isnt confusing.

I tried the zoom thing but it still didnt resolve my issue Im gonna try to clarify my issue a little bit more, before the change, my screen when I would surf the web would have the apple logo and safari and file and edit and view buttons at the top left hand of the screen and the upper right hand screen would have the time and the wifi strength and my name and the spotlight box and a volume control but now they dont show while Im browsing the web unless I take my arrow and move it to the very top of the screen then those boxes will drop down like it used to be but when I take my arrow and move it from the top of the screen it disappears again and ll I get is a back and forward arrow and the url input bar. Anyone else have any ideas of what I did to mess this up?

How to change a setting in the Java Control Panel with command line

Hi,
I am trying to figure out how to change a setting in the Java Control Panel with command line or with a script. I want to enable "Use SSL 2.0 compatible ClientHello format"
I can't seem to find any documentation on how to change settings in the Java Control Panel via the command line
Edited by: 897133 on Nov 14, 2011 7:15 AM

OK figured it out. This is for the next person seeking the same solution.
When you click on the Java Control Panel (found in the Control panel) in any version of Windows, it first looks for a System Wide Java Configuration (found here: C:\Windows\Sun\Java\Deployment). At this point you must be wondering why you don't have this folder (C:\Windows\Sun\Java\Deployment) or why its empty. Well, for an enterprise environment, you have to create it and place something in it - it doesn't exist by default. So you'll need a script (I used Autoit) to create the directory structure and place the the two files into it. The two files are "deployment.properties" and "deployment.config".
Example: When you click on the Java Control Panel it first checks to see if this directory exists (C:\Windows\Sun\Java\Deployment) and then checks if there is a "deployment.config". If there is one it opens it and reads it. If it doesn't exist, Java creates user settings found here C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7.
__deployment.config__
It should look like this inside:
*#deployment.config*
*#Mon Nov 14 13:06:38 AST 2011*
*# The First line below specifies if this config is mandatory which is simple enough*
*# The second line just tells Java where to the properties of your Java Configuration*
*# NOTE: These java settings will be applied to each user file and will overwrite existing ones*
deployment.system.config.mandatory=True
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
If you look in C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7 for example you will find "deployment.properties". You can use this as your default example and add your settings to it.
How?
Easy. If you want to add *"Use SSL 2.0 compatible ClientHello format"*
Add this line:
deployment.security.SSLv2Hello=true
Maybe you want to disable Java update (which is a big problem for enterprises)
Add these lines:
deployment.javaws.autodownload=NEVER
deployment.javaws.autodownload.locked=
Below is a basic AutoIt script you could use (It compiles the files into the executable. When you compile the script the two Java files must be in the directory you specify in the FileInstall line, which can be anything you choose. It will also create your directory structure):
#NoTrayIcon
#RequireAdmin
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_UseX64=n
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
Func _JavaConfig()
     $ConfigFile_1 = @TempDir & "\deployment.properties"
     $ConfigFile_2 = @TempDir & "\deployment.config"
     FileInstall ("D:\My Documents\Autoit\Java config\deployment.properties", $ConfigFile_1)
FileInstall ("D:\My Documents\Autoit\Java config\deployment.config", $ConfigFile_2)
     FileCopy($ConfigFile_1, @WindowsDir & "\Sun\Java\Deployment\", 9)
     FileCopy($ConfigFile_2, @WindowsDir & "\Sun\Java\Deployment\", 9)
     Sleep(10000)
     FileDelete(@TempDir & "\deployment.properties")
     FileDelete(@TempDir & "\deployment.config")
EndFunc
_JavaConfig()
Now if you have SCUP and have setup Self Cert for your organization, you just need to create a SCUP update for JRE.
Edited by: 897133 on Nov 16, 2011 4:53 AM

I no longer want to merge my work laptop with my icloud account on other devices. How can I change the setting for the laptop?

I accidentally agreed to set up my work laptop icloud account to merge with my other devices and want to keep the work information separate. How can I change the setting for the PC at work?

Sign out of iCloud.

I am trying to find out if I can change a setting of the calendar in my iPhone. When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday. Is it possible to make this change? SS

I am trying to find out if I can change a setting of the calendar in my iPhone.
When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday. Is it possible to make this change?

Hello SMEvans32
You can use iCloud to share the Calendar, that way she will always be up to date on that particular section of your work calendar. If you want to use iCloud, I would recommend backing up so you have a safe copy of your data.
iCloud: Calendar sharing overview
http://support.apple.com/kb/PH2689
iCloud Setup
http://www.apple.com/icloud/setup/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

It is a suggestion on Adobe Dreamweaver: Could you change the setting of the page or template; to a free platform? example; move: images, tables and other elements all over the place covering the page. in order to facilitate the user in the design envir

It is a suggestion on Adobe Dreamweaver:
Could you change the setting of the page or template; to a free platform?
example; move: images, tables and other elements all over the place covering the page. in order to facilitate the user in the design environment.
free
Thank you for your attention

Adobe has been trying this and the product is called Muse ( Web design software | Download free Adobe Muse CC trial ). It doesn't give you the control over the code that most developers prefer but it could help bridge the gap for design if that is what you are looking for.

I forgot how to use the setting, move the mouse to the upper left corner and the windows become smaller for an overview?

i forgot how to use the setting, move the mouse to the upper left corner and the windows become smaller for an overview?

I'm not quite sure what you want - if you want an overview of all open windows, use the F key.. Otherwise please post back and be more specific.

Why can't i change the setting at the security

Why can't i change the setting at the security & privacy? After I switch to OS X Yosemite, i cant install some application. It says that I can install due unidentified developers. Can anyone help?

You can change the setting, you may need to click the lock at the bottom of the preference pane. Be careful what you download and install, Gatekeeper is there to help you. OS X: About Gatekeeper - Apple Support

HT2470 The Finder toolbar, by default, has Previous and Next buttons that let you navigate back and forth in folders. I somewhat change that setting and can't go back and foreward. How do I change this setting to the original one? I tried everything!

The Finder toolbar, by default, has Previous and Next buttons that let you navigate back and forth in folders. I somewhat change that setting and can't go back and foreward. How do I change this setting to the original one? I tried everything! Help!

Select a Finder window, Finder->View->Customize Toolbar…, and add it back.

I like the new version of Firefox 4, but have slowest problem with the company bluecoat proxy. I have change different setting in the about:config. Any Ideas how to to fix the slowest.

I like the new version of Firefox 4, But have slowing problem with the bluecoat proxy. I have change different setting in the about:config with no luck. Any ideas why it's moving so slow would help?
network.automatic-ntlm-auth.trusted-uris = proxysg
network.negotiate-auth.delegation-uris=proxysg
network.negotiate-auth.trusted-uris=proxysg
network.negotiate-auth.allow-proxies = True
network.ntlm.send-lm-response = True
network.automatic-ntlm-auth.allow-proxies=True

You can also look at Tab Mix Plus.
Tab Mix Plus: https://addons.mozilla.org/firefox/addon/1122

Mighty Mouse Wireless disconnect

Hi, i've a Mac Mini Intel with a Mighty Mouse Wireless.
After the lastest OSX upgrade, 10.4.8, i notify that my mouse randomly disconnect for a while (2/3 sec), than reconnect.
I decided to try to reinstall Osx from my dvd, and i saw that using mouse without drivers and OSX 10.4.5 there are no disconnection problem.
I tried with bootcamp in windows too and there is no problem.
Then i upgraded my system to 10.4.8 and installed mouse drivers, after this the mouse started to disconnect randomly.

However when I disconnect the external display and start using the laptop like normal...
Do you shut down or at least put the Mac to sleep before unplugging the display? All of Apple's Knowledge Base articles include closing the MacBook (or PowerBook or MacBook Pro) to put it to sleep before plugging or un-plugging an external display.
-Doug

Does IceMat work with Mighty Mouse Wireless?

I am looking for the perfect mousepad. I am tired of the tiny and flimsy mousepads that move all over the place.
After looking around I found the IceMat. It looks pretty nice and seems like it might be a very good mousepad (It better for $30+).
Has anyone used the IceMat with the Mighty Mouse (Wireless)? If so, how was it? Has anyone used the IceMat at all? What do you think?
Any other suggestions for the perfect mousepad?
IceMat Manufacturer site:
http://www.icemat.com/
IceMat on Amazon
http://www.amazon.com/Icemat-10012-2nd-Edition-Blue/dp/B000BCZ8Q8

I used IceMat before and I won't suggest it for any mouse from apple.
If you really want a nice mousepad, go for FUNC1030. I am using it
with apple mighty mouse and they work pretty well together.
You can find more information about it on www.func.net
The reason I don't suggest IceMat is that if you read the description from its website carefully, you should notice it's made of glass. It will kill your mouse very fast. That's why they also sell Icemat Padsurfers to protect your mouse. However, none of them work with mighty mouse. Also, for a mousepad which has a hard material surface, you need to clean it very often. At least once a week or might be more often.

Transport the setting of the content analyzer

Hi,
Is it possible to transport the setting of the "chenk Execution" on the content analyzer? From Dev to QAS, PRO. for example, jobname, logical sys, check type.
kind regards,
Masaaki

Hi.
I think you can't change valid_from, because it's a system field in which creation date is put in. On the other hand you can change the date_to, but in order to change it you have to start from the bottom. So, for example you can't set date_to for an upper unit to a smaller date than it's set for the unit bellow.
And I was refering to valid dates of org.unit and not for valid dates of addres of org.unit. For address both valid dates can be changed.
Regards.

How do I disable the setting of the jbo.ApplicationCookie

Hi,
I am using BC4J with struts and have all my action mappings set to "stateless" releasemode. A cookie is still being set with the name "jbo.ApplicationCookie" and a value of "-1".
The problem I'm having is that I'm working in an environment with mulitiple servers being loadbalanced by a hardware device, so there's no gaurantee that an individual user will land on the same server from request to request. I'm getting the error:
oracle.jbo.common.ampool.ApplicationPoolException: JBO30006: The cookie for session A50D3FE5149C50CC0280FE083D3C4866 and application AccountService is not a valid handle for application pool, AccountServiceLocal. The cookie may not be used to access this pool instance.
at oracle.jbo.common.ampool.ApplicationPoolImpl.validateSessionCookieInPool(ApplicationPoolImpl.java:2477)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2034)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:398)
at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule(HttpSessionCookieImpl.java:230)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:369)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:364)
at oracle.jbo.html.BC4JContext.getApplicationModule(BC4JContext.java:152)
...and so on...
can I just disable the setting of the jbo.ApplicationCookie altogether as I'm operating in stateless mode anyway??

Ok, so the long identifier appears like it might be the Tomcat session identifier, which may very well be timed out as we have our session timeout parameter set very low. However, why should this foul up the Application Module pool when I'm running in "Stateless" mode?..Seems like an unnecessary dependency.
oracle.jbo.common.ampool.ApplicationPoolException: JBO-30006: The cookie for session 1A6D244B9C1E0EBA88A2FDF8DAB2957E and application AccountService is not a valid handle for application pool, AccountServiceLocal. The cookie may not be used to access this pool instance.
at oracle.jbo.common.ampool.ApplicationPoolImpl.validateSessionCookieInPool(ApplicationPoolImpl.java:2477)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2034)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:398)
at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule(HttpSessionCookieImpl.java:230)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:369)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:364)
at oracle.jbo.html.BC4JContext.getApplicationModule(BC4JContext.java:152)

Mighty Mouse wireless: changing the setting of the low battery indicator

Similar Messages

Maybe you are looking for