Mighty Mouse Wireless no longer working.

Hey,
I recently got a mighty mouse (Christmas) and it worked fine. I put the batteries in and the green light came on. I paired it with my Mac and it functioned. I turned it off and put in my bag. 2 days later i pulled it out again and the green light didnt come on. The mouse didnt feel right and it couldnt click at all. I replaced the batteries and now the primary click looks like it would work but still the mouse wont turn on. Anyone have any ideas?

Someone help please!

Similar Messages

  • Does IceMat work with Mighty Mouse Wireless?

    I am looking for the perfect mousepad. I am tired of the tiny and flimsy mousepads that move all over the place.
    After looking around I found the IceMat. It looks pretty nice and seems like it might be a very good mousepad (It better for $30+).
    Has anyone used the IceMat with the Mighty Mouse (Wireless)? If so, how was it? Has anyone used the IceMat at all? What do you think?
    Any other suggestions for the perfect mousepad?
    IceMat Manufacturer site:
    http://www.icemat.com/
    IceMat on Amazon
    http://www.amazon.com/Icemat-10012-2nd-Edition-Blue/dp/B000BCZ8Q8

    I used IceMat before and I won't suggest it for any mouse from apple.
    If you really want a nice mousepad, go for FUNC1030. I am using it
    with apple mighty mouse and they work pretty well together.
    You can find more information about it on www.func.net
    The reason I don't suggest IceMat is that if you read the description from its website carefully, you should notice it's made of glass. It will kill your mouse very fast. That's why they also sell Icemat Padsurfers to protect your mouse. However, none of them work with mighty mouse. Also, for a mousepad which has a hard material surface, you need to clean it very often. At least once a week or might be more often.

  • Why does the mouse scroll no longer work in Firefox 4?

    I upgraded to Firefox 4 and suddenly my mouse scroll no longer works. It works fine for other programs and IE also Chrome, just not Firefox 4. How do I fix this? If this cannot be fixed, how can resort back to the old version?

    Spoke too soon. It worked fine for 10 minutes then died again. Closed and re-opened Firefox and it's working again. If this keeps up I will end up back with Chrome or IE. Way too inconvenient for me to stay with a browser and lose this functionality.

  • Mighty Mouse button doesn't work in Login screen.

    When I boot up my Mac I can move the cursor with the mouse in the Login screen, but I can't click on anything - the buttons don't work. Once I'm logged in the mouse works normally in every way.
    This only happens with the Mighty Mouse - 3rd party mice work fine in the Login screen.
    I can't see any settings in the Mouse System Prefs that would affect this.
    Anybody got a suggestion?

    Nobody got any insights?

  • Mighty Mouse Wireless disconnect

    Hi, i've a Mac Mini Intel with a Mighty Mouse Wireless.
    After the lastest OSX upgrade, 10.4.8, i notify that my mouse randomly disconnect for a while (2/3 sec), than reconnect.
    I decided to try to reinstall Osx from my dvd, and i saw that using mouse without drivers and OSX 10.4.5 there are no disconnection problem.
    I tried with bootcamp in windows too and there is no problem.
    Then i upgraded my system to 10.4.8 and installed mouse drivers, after this the mouse started to disconnect randomly.

    However when I disconnect the external display and start using the laptop like normal...
    Do you shut down or at least put the Mac to sleep before unplugging the display? All of Apple's Knowledge Base articles include closing the MacBook (or PowerBook or MacBook Pro) to put it to sleep before plugging or un-plugging an external display.
    -Doug

  • Tecra A3 - Creative Mouse Wireless does not work

    My Creative Mouse Wireless does not work while touchpad is installed.
    Even if I disable the Touchpad, the mouse seal does not work.
    Does anyone know how to solve this problem?
    Thank you,
    R.P.

    Hello
    On this way it is not easy to say what the problem is. I assume that you got some installations software for your external device. Install it and it should works.
    As far as I know functionality of external mouse doesn`t depend on touchpad settings.
    Bye

  • Bluetooth Mighty Mouse and Keyboard not working in Win XP!

    Hi All,
    I simply cannot get my Bluetooth Mighty Mouse and Keyboard to work in Win XP via Bootcamp! The bluetooth icon appears in the tray and even shows that they are connected but they do nothing at all. One thing to note is that they show up as connected but with no password. Could this be the problem? If I reconnected the two with new passcodes for XP, would they still work when I reboot in OSX?

    upgrading to vista sorted things out!

  • Mouse buttons no longer work for iTunes playback (play/pause, next, previous) after update! Help please!

    Mouse buttons no longer work for iTunes playback (play/pause, next, previous) after update! Help please!

    When you say "mouse button", do you mean clicking on the controls in the upper left of the iTunes window or do you mean that you have special media keys on your mouse?

  • Mighty Mouse Wireless Right Click not working

    Hi Friends!
    I am having some difficulty getting my Right Click on my Wireless MM to work. I am aware that I need to keep my left finger off the mouse but it still does not seem to be working.
    Any thoughts ?
    Thanks !
    J

    Try replacing the battieries (or just taking them out and putting them back in). Forcing the connection between the Mighty Mouse and the iMac to break. Then put the new batteries, or the ones you were you using from before, in the MM.
    Re-link the Mighty Mouse to the iMac and try applying the settings for the right click function in System Preferences.
    Remember to mark as helpful or solved.
    -benny

  • Apple Wireless Mighty Mouse internal speaker not working !!!

    Recently I bought an used Wireless Mighty Mouse (first version with grey side buttons), the mouse is working perfectly minus the single little detail that I can not hear any clicking sound from the internal tiny speaker inside the mouse when I use the little scroll ball above the mouse or when I press the grey side buttons, is this normal or should I hear the clicking sound simulated by the internal speaker? is there a way to enable or disable the internal speaker by software? Maybe is disabled by default, I don't know. I really don't think the speaker could be damaged due to the rest of the mouse is working like a charm but maybe mine came without a speaker, could be? or maybe it got disconnected somehow. Any clues or ideas would be very helpful. Thanks !

    I know what a microswitch is, please look at these links, here are the proof there is (or maybe there was) a tiny speaker in some mighty mouse and wireless mighty mouse:
    http://arstechnica.com/uncategorized/2005/08/dissect/
    and this:
    https://discussions.apple.com/message/988965#988965
    and this:
    https://discussions.apple.com/message/1429358#1429358
    and this:
    http://www.youtube.com/watch?v=OOw04wTtlIo
    and this:
    http://macdailynews.com/2005/08/02/apples_new_mighty_mouse_provides_audio_feedba ck_for_clicking_and_scrolling/
    and I can keep giving you tens of links to proof you that actually there is (or maybe there was) a tiny speaker inside the mighty mouse and the wireless mighty mouse, If yours came without one it doesn't necessarily mean all came without one, right? That is why I asked you what version you have in order to figure out which ones does have the speaker and which one doesn't.

  • Mac Mini and Bluetooth Recent Problems (Mighty Mouse, Wireless Keyboard)

    Hello there,
    I have an issue with my Mac Mini.
    We had a storm here recently, so I switched my Mac off. After that, I turned it on, but to my surprise my Wireless Mighty Mouse and Wireless Keybord do not function any more. The green dot under the mouse nad keyboard flashes for a few seconds and turns off. I tried to plug my regular mouse and keyboard but it seems the do not work too. Any solutions?

    i dont know if you have another mac around but have you tried repairing the disk by putting it into Target disk mode and hooking up another mac to it? if nothing else, try putting the install CD/DVD and boot from there by holding down "c" as it boots. if that works then it may just be a bad BT card. if it doesnt work then you may have bad usb ports. i hope you have applecare!
    a tip for bluetooth HIDs, spread them apart. you will experience problems on occasion where their signals get crossed and they fail to sync right.
    by the way, if you went the extra mile to turn off your mac because you were concerned about it, then why didnt you just unplug it from the outlet?

  • Mighty mouse in bootcamp not working

    Hi Team.
    I have just installed Vista Ultimate and the newest drivers for it from apple (the new exe download)
    Its all gone well and I am typing to you from the apple wireless keyboard.
    However the wireless mighty mouse is not working.
    I followed this procedure.
    Opened bluetooth in the control panel and added an item. It searched and found the mouse I selected it then told it I did not want to connect with a passkey. Eventually it says connected sucessfully with no pass key. The one of those terribly annoying pop up ballons tells me there is new bluetooth click to use it, I click it and then a new window comes up asking me to enter a pass key?
    We can get no further. Basically it says connected but does not work.
    Any ideas?

    I've got exactly the same problem - iMac with Bootcamp, Vista Ultimate 32-bit, recognises wireless keyboard but keep getting the same pop-up asking for a passkey for my mighty mouse despite asking it to set it up with no passkey.
    Went throught the whole Bootcamp/Vista install process fairly seamlessly otherwise.
    Anyone got any other ideas?

  • Mighty Mouse (wireless) will only scroll up & not down

    Has anyone come across an issue like this, I think it is hardware, but thought I would ask around first?
    I tried using our 2nd wireless mighty mouse that is paired with the iMac and that worked correctly (scroll both up and down) when paired with my MacBook Pro. However, when I re-paired the mouse in question, it still only scrolls up.
    Any thoughts are greatly appreciated.
    Thank you

    Hi bbwc-
    Greetings and welcome to the Apple boards
    You must clean said mouse: How to clean your Mighty Mouse
    Luck-
    -DaddyPaycheck

  • Mighty mouse right click not working...

    Hi,
    I've recently bought my macbook pro in the summer along with a wireless mighty mouse. after working on the computer a while, the right click function stops working! i tried installing the software that comes with the mouse but i get the same results...
    any suggestions?
    thanks in advance!

    . Follow the steps for disassembling the MM on many of the web sites until you have the upper shell separated from the base. I found removing the bottom grey ring the easiest method.
    2. Inside the upper shell you will see the plastic backed carbon traces used to detect the finger locations. In the centre of the upper shell is also a copper strip adhered to the shell. The plastic traces and the copper shim have a connection through a carbon dot on the shell where there are two holes next to a black carbon dot. I found that there were two issues with my MM that may have caused my issues. The first was that the plastic detectors were not fully adhered and flat on the inner shell. Then I found that the small carbon button which contacts the copper was not fully pressed down. I ran my finger over the entire internal surface of the shell to press down the adhesive bonded parts and then reassembled the mouse.
    3. Instead of gluing the bottom grey ring back on the mouse, fit it in place with small sections of 3M invisible tape, over the grey ring and upper case, just in case things go awry again. If they're small enough, you won't see them when the mouse in operation and the case remains securely closed. Once you are sure you have no more problems then you can add a dab or two of superglue to permanently close the case at a later date or still have access to clean the scroll mechanism at a later time as well.
    The other outcome might be that my disassembly and reassmbly reseated a poorly contacting cable(s) from the base the the upper shell. Either way, I have a fully functioning right click again in all situations. I have not had to remove the batteries in the mouse for over a week now whereas the power reset was becoming an hourly occurrence previously.

  • Bootcamp, Mighty Mouse and Keyboard not working

    Hi All,
    I just install yesterday Windows 7 (Ultimate 64bits) by Bootcamp in my iMac 21" (bought in 2013).
    During the installation, the Mighty Mouse and the keyboard were not working (except the first W7 screens, selecting partition and language), and now, installation finished, i got to use an external keyboard to select username and password, because Mighty Mouse and Wireless Keyboard are not working with Windows.
    I restart the computer using OSX and both are working fine.
    Could you please help me?
    Best
    Jorge

    upgrading to vista sorted things out!

Maybe you are looking for

  • Date and time stamp for movie. How?

    I need the date of a movie--or clips from movies---made with a Flip camera.  How do I get that date to appear on the footage?

  • JUST TOO LESS OF RAM ON THE N95

    I have always been a Nokia fan for many years and have always recommended Nokia phones to all my friends. I however bought the N95 and am terribly dissapointed to find that the RAM is totally totally inadequate and one just cannot enjoy the phone due

  • Is my 27" i7 iMac overheating?

    Hi, I got my iMac 27" in October and more and more lately I've been noticing that along the top it has been very hot to touch (sometimes almost too hot to touch). According to a widget it is running at about 49-59 Celsius. Is this normal or is there

  • Garageband wont Install

    I waited for a new app disk for my macbook pro. but after a month it didnt come so i just bought garageband. BUT it wont install. I gets through the install process, asks for my password so it can finish and then it just stops. When i click on it aga

  • Issue in soap request SAP Host Control

    Hi. I use SAP NW 7.4  SP2 and have issue in next request POST / HTTP/1.1 SOAPAction: "" Content-Type: text/xml; charset=UTF-8 Content-Length: 559 <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns0="urn:SAPHostCont