Mighty mouse won't work after installing 10.5.2

I tried pairing it again but it is not recognized. It's on with fresh batteries about a foot from my powerbook. Thoughts?

i found just the opposite.....it was unusable in 10.5.0 and 10.5.1 but now it works perfectly. And I almost sold it .........

Similar Messages

External keypad won't work after installing OS 7.

External keypad won't work after installing OS 7. I have a "Zagg" keyboard that won't pair now to OS 7,...Why?

They do work. I have one and mine is working. Have you tried to reset your iPad? HOlding down teh sleep and home keys until it reboots then try pairing again.
A slightly more drastic thing is to go into the settings and reset all settings. THe downside, you will need to retweak your device but it can help fix keyboard glitches.

Printer won't work after installing mountain lion?

printer won't work after installing mountain lion?

Assuming you've first checked Software Update to see if there are any updated drivers and it's still not working, you could try resetting the printing system.
System Preferences>Print & Scan, Control+Click or Right Click on a printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again.

Wireless Mighty Mouse won't work properly with MacBook/tech support stumped

Hi. First post. Anyone heard of this problem? Appears to be location-sensitive. Problem described below, but first, short background...
Just bought entire Mac system after decades in corporate world with PC. Believed the TV ads that it would be simple. Already have been back to Mac store 6 times and have spent roughly 7 hours on phone with help line. Mac store even replaced Macbook entirely in case it was faulty logic board/Bluetooth circuit -- didn't help. Also, problem doesn't happen in store. So, to get to the point:
Wireless Mighty Mouse doesn't work properly when hooked up to Macbook -- herky-jerky, slow, unresponsive, sluggish, imprecise, intermittently better/worse. Went through a few Mighty Mouses and finally gave up; now using hardwire mouse and there's no problem. But before I return Mighty Mouse for refund, would like to see if there's a solution b/c I'd prefer wireless.
System is the latest little souped-up Macbook, 23" HD Cinema external monitor, external wireless Apple keyboard (which works fine), wireless Mighty Mouse (the culprit), Airport Express, HP printer. All brand new from local Mac store (Fifth Avenue, New York)... where the Genius counter folks have given up. I'm not convinced they believe me because (a) the problem doesn't occur there, and (b) after a couple of new Mighty Mouses, they finally just gave me a new Macbook to make me go away... but after going through the whole system setup once again, same problem. Have tried many different mousepads, BTW.
Tried all the stuff phone tech support suggested -- removing/installing/reinstalling software, etc. Airport works fine; using modem and printer connections there. Bluetooth works fine with keyboard. I've scouted around for intefering devices; even unplugged electrostatic loudspeakers and old tubed amps in living room (concrete wall separates rooms), unplugged hifi in same room, etc. On 40th floor of Manhattan hi-rise; concrete walls between neighbors. Have never had interference before with anything; previous PC system worked fine with Microsoft wireless (optical) mouse.
This is no longer urgent because hardwired Apple mouse works well. It's just mysterious.
Any thoughts?
Other than that, I like the Mac environment so far. Fifth Avenue store is cool, also, because it's open 24/7.
Ken
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM

Hey, thanks! That was fast. I'm impressed by the Mac community.
This program helped my hardwired mouse, actually, and did give me wider parameters on the wireless mouse, but it didn't correct the herky-jerky/sluggishness -- actually amplified those problems.
Ken

Dvd/cd player won't work after installing windows 8.1

I recently installed windows 8.1 on my Pavilion All in One Desktop Computer and now the computer won't recognise the DVD/CD player. I have downloaded all current drivers, but still not working. Any ideas?

Hello Gindel95,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how the DVD/CD player will not work after installing Windows 8.1, and I would be happy to assist you! To begin, I will need to ask you a few questions:
What is the Product and Model Number of your desktop computer?
What version of Windows did you have installed on your computer before upgrading to 8.1?
Has your computer completed all of its important Windows Updates?
In the meantime, I recommend following this document on Download or Update Software and Drivers for HP Computers, which should help configure your DVD / CD drive.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Mouse won't work after computer wakes

I have both the original iMac keyboard and mouse (wired) and also a (wired) Microsoft USB Keyboard and mouse set. It doesn't matter which set I'm using as this happens with both. Whenever the computer sleeps and is then required, the mouse won't function. It stays in the centre of the screen.
With the MS Kb and mouse combo I use an additional 4-port USB hub. I have the latest MS software (6.0 for Mac) installed for this set. When needed after awakening, the mouse just sits. No activity whatsoever. The only way to activate it is to unplug the USB connection from its port on the hub. Now it will work fine.
Using the Mac set, the Mac mouse is connected into the Mac keyboard USB port. There is no USB hub in this scenario. However, the same thing happens. I have to disconnect the mouse from the Mac keyboard and reconnect it.
Any idea what is happening here? When I first started the Mac or MS sets there was no problem. Could it be that one of the Mac software updates is causing a glitch?
The reason I use the MS keyboard and mouse (MS Natural Ergonomic Keyboard V1.0 and MS IntelliMouse Explorer 4.0) is because I prefer the keyboard layout. I have difficulty with the straight-across keyboards.
Looking forward to your responses. Thanks in advance.
Lynn
Intel Core Duo Mac OS X (10.4.7) 1 GB DDR2 SDRAM, Netgear Router

Here is a Knowledge Base article with things to consider;
Intel-based Mac: USB Keyboard or mouse stops responding
Also is the hub externally powered? Or does it draw power through the USB? Non-powered hubs have caused issues.

Touchscreen and trackpad won't work after installing new OS

i want to ask why that after i upgraded my os, and during the start up when i have to scroll down the aggrements text my trackpad and my touchscreen won't work. is that any way to solve this problem? i beg you to answer my question please. i would be very grateful. thanks

Did you actually upgrade to OS 7.0 or to OS 7.1?
What OS were you previously on that you want to downgrade to?
For the application in question, go to Options > Device > Application Management. Find the app and delete it.
Now, go back to AppWorld and install it again and see if it works correctly.
For most apps that I know of, if they worked correctly on OS7, they will be fine on OS7.1
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Mighty mouse won't connect after reboot

Hi all,
I updated my ~3 month old Mac Pro with the latest security update on 11/13/2009, and went home for the weekend. Returning on Monday 11/16/2009, I found that my mighty mouse would not connect to the Mac. I'd had intermittent connection issues previously, so I rebooted to no avail. Investigating further, I found that if I click on the Bluetooth menu and select the mighty mouse and click Connect, the Bluetooth icon flashes to connected briefly then back to unconnected. I can repeat this ad nauseum with no success. If I go into Mouse preferences and select Set Up Bluetooth Mouse, and then turn the mighty mouse off and then on to initiate pairing, the setup window will find the mouse. I then click Continue and it attempts to connect, but on the first try it always fails. If I then repeat the discovery and connection process again, it will pair successfully. After that the mouse works normally. However if I reboot my machine, the pairing is lost when Mac OS comes back up. This always happens with the mighty mouse, and maybe 50% of the time when I perform the same procedure with my wireless keyboard. I then have to go through the semi-successful pairing process again. I've tried various fixes including deleting the com.apple.Bluetooth.plist and rebooting, but nothing has solved this. This also happens if I try to use a magic mouse I bought for my Macbook Pro on the Mac Pro. I haven't had any bluetooth problems on the laptop.
This was addressed in another post but the original user marked it as answered after Apple had him pair the mouse with another computer and then with the first. Tried that too, doesn't work for me.
Ted

Hello d:
Try making the BT devices "favorites."
Go to system preferences>bluetooth. Highlight the device. Click on the little gear and "show more info." Click on the gear again and make the device a favorite.
Barry

Canon MX 860 scanner won't work after installing Mt Lion

After upgrading my IMac to Mountain Lion v 10.8 my wireless Canon MX 860 scanner function won't work. The printer works. When I try to start the scanner either from the keyboard or the scanner I get an error message: MP Navigator EXquit unexpectedly.
I downloaded and reinstalled the scanner driver
mac-mx860-14_11_4a-ea8_2-1.dmg
and restarted and it still doesn't work.
any other suggestions?
thank you

You may also need to update MP Navigator to v2.1.3. If you are using an older version then trash that version before installing the latest version.

Wireless mouse doesn't work after installing iTunes

New 30Gb iPod, installed iTunes v6 on 6-mos old HP laptop with docking station/wireless keyboard/mouse. All is well, updated iTunes with latest from web, loaded songs on iPod BUT now wireless mouse will not work. Reset mouse, works for a few clicks, then dies. Reset mouse again, few more clicks, then dies. Reboot without iPod connected, no iTunes up, still mouse only works for a couple clicks. Touchpad on laptop works, also so does wireless keyboard so I know transmitter is working (not battery problem). All worked fine until I started playing with options in iTunes today. I didn't uninstall iTunes yet, is that next step? Anyone else have this problem? Suggestions???

I'm pretty sure it's probably just your mouse/computer, however I would recommend uninstalling iTunes just to make sure though.

Premiere Pro won't work after installing windows 8.1

Hi,
I have recently installed Windows 8.1 on my laptop. After the installation was completed I got an error message when I tried to open Premiere Pro CC. The error message says the program can't start because MSVCP110.dll is missing and that I should reinstall. I don't want to reinstall as I'm worried about losing work. Any help would be much appreciated.

Hi,
Firstly I must apologize for not replying to this earlier. I have done as suggested restarting my computer after installing but I still get the same error message.... I know I've left this response very late but any help would be much appreciated.

IPhoto won't work after installing iLife '11

I installed iLife on both my work computer which is a '11 iMac and my personal computer is a '12 MacBook Pro. After installing I can't run iPhoto on either computer? When I try to open it on my computer it gives me a window that says "You can't open the application iPhoto because it may be damaged or incomplete." I've tried running updates and looking on forums that suggest 9.1 update but it will not allow me to upload it, it says I need a previous version? I'm not sure what is going on but it is very frustrating

Open Finder, go to Applications folder, delete iPhoto and reinstall it again. Finally, open  > Software Update and update iPhoto until you have iPhoto 9.4.1

My Canoscan 8400F won't work after installing Yosemite

I updated my IMac to OSX Yosemite 10.10 and now the Canoscan 8400F won't work.The toolbox won't open and none of the buttons will work. I've tried to find a new driver but they aren't making them for this system. Do I have to buy a new scanner?

I recently upgraded to Yosemite and my Canon LiDE 60 scanner stopped working. It is not on the Canon list of scanners supported by Yosemite. I downloaded and installed the LiDE 60 driver v11.1.3.1 which was the one listed for OSX 10.6, the last OSX version to list a driver. Still no luck. I eventually noticed that I currently have Canoscan Toolbox v 5.0.1.4, presumably updated along the way. Once I downloaded and installed Canoscan Toolbox, v 4.9.3.4, the one also listed for OSX 10.6, things are back to normal. You need the old driver PLUS the older (then current) version of Toolbox. This works for the LiDE 60, but the logic would apply to other older Canon scanners. Good luck.

Time Machine won't work after installing Mountain Lion

After installing Mountain Lion, I am unable to restore a file from time machine. I click on the time machine icon. It shows the bakups, I click on a previous backup but the screen doesn't roll back to the date. It only shows the current files. Example: I am trying to restore an email that was lost. I try to do a restore and it shows emails up to today even though I am asking for a back-up from a month ago.
Bob

Sorry, but I'm still not sure what you're seeing.
Are you starting from Mail, per the blue box in Time Machine - Frequently Asked Question #15?
Are you trying to restore emails from a mailbox in the "On My Mac" section?
Do the older backups not appear in the TimeLine at all, or do they appear but are faded-out?
Posting a screenshot might help.

Ipod touch won't work after installing a new app.

Hi!
Last night, I decided to install a new "Alarm clock," app and test it out by setting it to ring a minute later- what a BIG mistake, because during the time it was supposed to ring, it made my Ipod touch completely crash instead. For the past few hours all it's been doing is flashing back and forth between my homelock screen (with the "slide to unlock," bar at the bottom) and the Apple logo, with the round 'processing' image infront of it.
I have tried many different things to get it out of this funk but nothing has worked! I tried resetting the Ipod by holding down the menu and power button, the screen went black temporarily, didn't show the "slide to power off" bar and then just reloaded with the same two flashing images. I tried restoring it, but it wouldn't restore, until I did a special reboot that I read about via online boards- where you have to hold the power + menu buttons for 10 seconds, then release the power button whilst holding just the menu button for 10 seconds- but, whilst the Ipod did go through the whole restoring process thereafter, it didn't manage to sync up.
Now, not only does my ipod STILL flash back and forth between those two images. I keep getting an error message of (0xE80000001)! I used a different cable to try and sync up, but the blasted thing still won't stop flashing back and forth between those two images, and the ipod is not being recognised by itunes so the ipod keeps beeping, in and out of itunes and won't sync!
My ipod isn't 'jailbroken,' I haven't touched it's software or altered it in any way, to how it was sold to me. I would've liked to have brought it back the the Apple store to be looked at, but I don't think they'll help me because the top left hand corner of my Ipod is completely missing after my niece dropped it a few months ago- the Ipod still worked (up until I installed the **** alarm app) perfectly well until now!
Also, I have a mac, so any tips on how to access/help/fix this problem would have to have instructions for a Mac OS not Windows please!
Many thanks!

I keep getting an error message of (0xE80000001)!
Read here. iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

Mighty mouse won't work after installing 10.5.2

Similar Messages

Maybe you are looking for