Mighty mouse

does anyone else have a problem with the wireless mighty mouse. Mine some times has a problem with the scroll button. Sometimes it will scroll side to side and up BUT not down. i tryed to clean it, i restarted my iMac, i took the batteries out of the mouse, what do i do next? the mouse is only 2 months old. is there a way to take the mouse a part to clean it?

does anyone else have a problem with the wireless
mighty mouse. Mine some times has a problem with the
scroll button. Sometimes it will scroll side to side
and up BUT not down. i tryed to clean it, i restarted
my iMac, i took the batteries out of the mouse, what
do i do next? the mouse is only 2 months old. is
there a way to take the mouse a part to clean it?
I suffered similiar issues. Initially, switching the mouse off, waiting for the "connection lost" message to appear then switching it back on seemed to cure the problem for a while. Finally, it would not scroll down at all. I called Apple Care late one afternoon and after a some tests including (re)cleaning the mouse Apple agreed to replace it. It arrived by noon the following day. My initial disappointment was offset by the excellent service I received. I think the answer to your issue is replacement.
IMac   Mac OS X (10.4.8)   MacMini,MacBook

Similar Messages

  • Problem with Left Click (mighty mouse) and flash content

    Hi, first sorry for my bad english...
    Well I have an issue with the left click (i have mighty mouse) and flash content in Firefox:
    if i'm using Firefox and then change to any other app, when i get back to firefox i have no left click anymore...
    So i have to open the mouse setting panel and everything works fine again...
    I don't want to open the mouse panel over and over again to fix that, so what i can do?
    THANKS in advance =)
    I uploaded a video to show the issue:
    http://www.youtube.com/watch?v=ROWSod5fUjk
    Mighty mouse Settings:
    Left Click + Right Click
    Firefox ver: 3.5.5
    Snow Leopard: 10.6.2
    iMac 24" (iMac9,1)
    Message was edited by: MaLk Gopher

    Hi, Guys!!
    And you have some right cosmic_hippo , Why?
    Well think that the real problem it's something between Firefox and Flash content...
    because if i use Safari and i try make what i describe in the first post, i don't have any problem with the mouse settings.
    Only Happens when i use Firefox...
    Cheers.
    Well the issue is still there...

  • New Mac Mini and 2006/2007 Wireless Keyboard and Mighty Mouse

    Will my old wireless keyboard and mighty mouse from 2006 and 2007 work with the new Mac Mini?

    Thank You!

  • I have messed up the settings on my Mighty Mouse and don't know where they should be.  I cannot open a document by double-clicking anymore.  I don't know what setting adjusts that.

    I need help with my Mighty Mouse settings.  Don't understand the settings.  I can no longer open a document by double-clicking.  I think I changed my setting someway when I was trying to correct or find my up and down scrolling.   Please help. 

    I think you need to un-pair your mouse.   Leave it a few minutes than re-pair it as if you were starting from scratch and using the following details.   Item 1 will probably meet your needs.
    Troubleshooting wireless mouse and keyboard issues

  • Bluetooth Mighty Mouse keeps freezing after upgrading to Leopard

    My bluetooth mighty mouse has frequent, intermittent freezes (which appear to be a loss of sync to the iMac) after upgrading to Leopard (now 10.5.1) from 10.4.11 on my iMac 24" alum body. This mouse was rock solid on my iMac running Tiger. Luckily I do have a corded mouse which I've been forced to use the past week or so.
    Can anyone suggest anything?
    Thanks.

    I was just trying to help my Dad with the same exact issue (Mighty Mouse stops working on waking from sleep & trying to open bluetooth prefs at that point causes the system to lock up. Have to hold down power button to reboot)
    Oddly I have Leopard on my iMac 2.16 Core 2 Duo and have no issues with my Mighty Mouse.
    Hopefully someone comes up with an answer .... My Dad is 80 and just bought a new Powerbook and Mighty Mouse. It's hard to explain why the mouse doesn't work.

  • Mighty mouse alternative for OSX and XP

    Just ordered a Mac Pro - upgrading from G5 Powermac. I got the mighty mouse with the G5 and of course the MP comes with the same. I have gotten used to the mighty mouse to a point but part of the reason for getting the MP is for Windows and gaming. For this I think another mouse with 'real' buttons might be better. What are your recommendations for a quality wired multi-purpose mouse (XP and OSX) and are there any mouses (mice/moose/meece) that have a scroll wheel similar to the might mouse one (very useful in PS etc). I'm not keen on trackball types btw.
    Thanks

    The Logitech MX510. Love it w/ Mac and Windows.
    I'm a QA engineer w/ Avid and purchased this mouse for multi-button assignment mouse testing on mac and pc. I have one at home now too, it's the cat's meow. (sorry bad joke).
    I just couldn't get use to the mighty mouse. Don't dig the "Touch-sensitive top shell".
    15" 1.67 PowerBook, 2GB Ram, 100GB drive   Mac OS X (10.4.5)   ruthband.com

  • Connect Wireless Mighty Mouse to windows xp pro sp2 on bootcamp

    I recently installed windows xp pro sp2 on bootcamp i tried to hook up my Wireless Mighty Mouse and I got basically nowhere. I was able to get the computer to recognize it and i typed in the passkey "0000" and it knows that it is a bluetooth device and I changed the settings of the bluetooth to "always" be discoverable and still I have hit a dead end. I can still not seem to connect the wireless mouse in any way. What do I do???

    I FUIGURED IT OUT!!! omg im so happy right now. For anyone who might be wondering I'll tell you how to make it work it you had the same problem. Once you establish the mouse a device, highlight it in the devices menu, then click properties, then services, and once it is done searching check the box for the driver and click apply and your mouse should work.

  • Mighty Mouse no longer working properly

    The Mighty Mouse has been irritating me quite a bit because the scrollbar frequently stops working. Usually, the cleaning method provides a temporary solution (very temporary considering I've lost count of the number of times this has happened) but now, something different has happened. While trying to use the cleaning methods suggested, nothing worked. I kept on trying and now, not only does the scrollbar not work but the buttons don't work, either. Whenever I try to left- or right-click, my dashboard keeps popping up.
    Maybe if Mac could make a mouse that we could open up and fix, this wouldn't be a problem...

    Well there you go then.
    Contact Apple with regards to a replacement as I do believe the mouse has a 1 year warranty.
    Luck-
    -DP

  • My wired mighty mouse no longer scrolls down - only up and sideways.

    My wired mighty mouse no longer scrolls down; only up and sideways. It could be a hardware problem and I guess I should go and by a new mouse but before I do I thought I'd check whether there was any parameter I could change to fix or test this. Anyone else had this problem? Cheers.

    Hello and welcome to discussions,
    Several ways to cure this one...
    http://support.apple.com/kb/HT1537
    http://www.mightymouserepair.com/
    http://cultofmac.com/how-to-clean-your-mighty-mouse/4946
    Any better now?
    Regards.
    Ian.

  • Wireless keyboard and mighty mouse do not work with windows Vista

    I have a new iMac core 2 duo 20" used by my granddaughter.
    The drive has been partitioned using 50-50 with Boot Camp Assistant to form 2 250 GB partitions and windows Vista has been installed on one of them. The installation process runs smoothly as does the process when the OSX disc is installed for the relevant drivers for keyboard, mouse, isight camera etc. At the end of this process it is necessary to click a :"finish" button but at this point the mouse and keyboard have frozen and there is no other way of inputting information. Restarting in windows takes me to the log in page but there is no way to input the user name and proceed further.
    Apple support has suggested hat I use a wired keyboard and mouse or call Microsoft support. Microsoft support have told me that they do not support Vista on a Mac.
    Any suggestions would be helpful.

    I had the same problem on the mac mini from my dad with windows XP.
    I could install everything smoothly but when i wanted to connect the mighty mouse and a wireles apple keyboard i had the same problem.
    I fixed this by using a mouse with cable and then add the keyboard and mouse via bluetooth in the configurationscreen. i had to do do this 6 times (the same thing) before it worked so maybe its the same in vista

  • Does apple care warranty cover mighty mouse?

    hi.
    as many has experienced, i experienced problems with scrolling up and/or down w the mighty mouse. i tried to clean it with a few methods, and the one that worked was when i used a clean piece of paper, turned the mouse upside down, and rubbed it forwards and backwards several times.
    unfortunately, it now seems that i might have solved the scrolling problem (but its slowly not scrolling as well already!). but i cant activate the 3rd button anymore. i press down on the ball and instead of activating the 3rd button, it right clicks or left clicks instead.
    i also notice the ball is not as smooth as before. there is some fraying on the surface of the ball.
    my intel imac has apple protection care plan till june 2009. can the mighty mouse be replaced?

    Actually in 2 months my Mighty Mouse will be 3 years old.
    *Isopropyl Rubbing Alcohol* and a clean old T-shirt.
    http://en.wikipedia.org/wiki/Rubbing_alcohol
    I have an air compressor with an air drier on it, you can buy canned air at any electronics store.
    http://en.wikipedia.org/wiki/Gas_duster
    No, like Kenichi say's nail polish removers are way to strong and drinking alcohol is way to sticky.

  • Odd Mighty Mouse behavior?

    Hi,
    I have a brand new 24" imac with nvidia 8800 but my Wireless mighty mouse has started acting strange, jumping over the screen and making it impossible to use. I tried a wired mighty mouse and that's the same. I first noticed it after 10.3.5 upgrade but could it be a coincidence? I have done an archive and install back to 10.5.2 and it's still the same? It's not constant only intermittent.

    Check for any dust in the LED hole. Try using a plain surface, like a solid colored mouse pad, if the surface is on the shiny side. If that does not work...
    Try starting up from Mac OS X installation disc. If the mouse is also erratic when booted from another system, you can rule out the 10.5.3 update as the cause.
    If it works normally when you are booted from the installation disc, there is probably some issue with your current installation.

  • How to wired mighty mouse in windows 7

    i am using an old apple mighty mouse with my windows notebook. the trackball doesn't work and the configuration panel in Windows 7 doesn't config mighty mouse button. is there any solution to config mighty mouse in Windows 7? thank you.

    There is no need for additional drivers.
    Why?
    If you have a Wireless Mighty Mouse you have to turn your computer visible for other devices in the Bluetooth preferences - then simply search for Bluetooth devices, connect - done!
    To configure the Mighty Mouse's buttons, you might want to have a look at a tool called X-Mouse Button Control (http://www.highrez.co.uk/downloads/XMouseButtonControl.htm).

  • How to Configure Mighty Mouse in Windows 7?

    How to Configure Mighty Mouse in Windows 7?
    For example the 3rd and 4th Buttons on the Mighty Mouse.
    How to configure those actions in Windows 7?

    There is no need for additional drivers.
    Why?
    If you have a Wireless Mighty Mouse you have to turn your computer visible for other devices in the Bluetooth preferences - then simply search for Bluetooth devices, connect - done!
    To configure the Mighty Mouse's buttons, you might want to have a look at a tool called X-Mouse Button Control (http://www.highrez.co.uk/downloads/XMouseButtonControl.htm).

  • Two mighty mouses, one macbook pro.

    I have a wireless mighty mouse for home. Sometimes lately when I take my macbook pro somewhere, I noticed I have forgotten my mouse. So, I splurged and bought a 2nd mouse to leave in my case so I never have to remember to bring my desk one.
    Well, it's not working as planned. I have to re-sync them (or whatever the term is...). I use the one in the bag all day, shut it off. Go home, start up mac, and now my desktop one doesn't work. It's really very, very annoying and time consuming to do this every time.
    I did a quick search here, but just didn't see any definitive answers on why you can't use two (or more) wireless mice with one computer. Each has a unique hookup, so it should work fine.
    Any suggestions?

    Hello syn:
    This is from the Bluetooth help database:
    http://docs.info.apple.com/article.html?path=Bluetooth/1.0/en/blu24.html
    If I read the last bullet correctly, you are trying something that Apple says you should not do (the why, I do not know).
    Barry

  • Does Time Machine Backup irritate wireless Mighty Mouse?

    Hi there. I'm having a strange issue here. With an iMac that came with bluetooth mouse and keyboard, OS out of the box (no software updates installed because there's no internet connection), each time Time Machine is backuping files, the Mighty Mouse is acting weird. It actually feels like someone else is working with it. Even if I do not use it and leave it alone, the pointer goes wild on the screen. Trying to work during Time Machine backups is impossible, because I cannot use the Mouse properly.
    Does anyone of you have a similar, if not, the same issue? Any ideas?
    Thanks in advance,
    later, Stephan

    I am having a similar problem with my IMac and Time Machine. During wireless Time Machine backups, the wireless mighty mouse and wireless keyboard disconnect. If the mighty mouse remains connected, it moves very slowly and is virtually unusable.
    So far I've thought of two potential problems to troubleshoot:
    1. I experience this problem when I connect to the Time Machine through the "802.11n (802.11b/g compatible)" wireless connection (set in the AirPort Utility), but I don't experience the same problem when I connect to the Time Machine through a wired ethernet connection. So it appears the b/g compatible setting is causing interference. I haven't tested to see if the "802.11n only" wireless connections causes this problem or not.
    2. I also wonder if the IMac does not have enough RAM to complete the wireless backup. My IMac has 2gigs of RAM, and during backups it maxes out. I plan to upgrade to 4 gigs to see if the problem continues. (Stephan, how much RAM to you have installed?)
    peace,
    Marcus

Maybe you are looking for