MIGO 551 Error Deficit of BA Unrestr. prev ..

Hi MM expert I really need your help we are going to live the new company next week and i only found out these things to be done..
Im new in MM..
here is the scenario..
1. on new company- our client do their testing there uploading initial stocks, GI for delivery etc.
2. so before go live we need to clear the stock to 0.
3. on solution is thru MIGO using 551 movement type scraping all stocks.. when i manually tested it its OK.
problem:
1. on some materials it encounters error Deficit of BA Unrestr. prev somthing..
- can someone explain the reason or where i could check why it occurs
2. im not familiar so much in GLs etc.. I know that in OBYC if 551 movement type is use
posting is on transaction key GBB in VNG. if i wont enter GL in MIGO just business area and cost center as required
will the posting be in GL assign in VNG? is that correct when it comes to scrapping?
another thing I check prev posting of material.. it was posted using 561 movement type.. the GL use is the one in GBB BSA.
so should teh GL to use is the one in BSA or in VNG?
thanks a lot i hope i could get answer right away,..
najah

if you use mvt 551 to scrap the stock.
how to deal with the Material doc. with value and relatvie FI doc?
since you can use 551, why not use MI10?
the stock deficit may caused by wrong sloc and wrong posting period.
please check the actual stock location (maybe in blocked location or QI location)
please also check when the stock is there. you can not clear the stock of next month in previous month.
thanks.
Edited by: JiQing Zhao on Oct 21, 2010 10:35 AM

Similar Messages

Error Deficit of BA Unrestr. prev ( MIGO )

Hi Guys,
I am trying to do the cancellation of Material document in MIGO transacction, but i am getting the error Deficit of BA Unrestr. prev. 1,200 EA : 5C3E6C285AA 1012 ATL5 3510.
Anyone know how to solve this?
Regards.
Mireya

As stated already, the above error is caused by the stock not being in Unrestricted in the Previous Period.
For Example:
1. Receive Stock into Unrestricted
2. Move stock into QI
3. Period Ends - Stock Stored in QI, not Unrestricted
4. Stock removed from QI (Back to Unrestricted)
5. Attempt to reverse initial Receipt Dated in Previous Period from Unrestricted
The attempt to reverse the receipt would have a deficit of Unrestricted prev. error. When the period ends, it captures the current state of each material (i.e. what quantities are stored in Unrestricted, QI, Blocked, etc.). When you attempt to post a transaction to the previous period, it will verify your stock quantities against what it captured at end of that period.
In order to correct above scenario.
1. In Current Period, move Stock back to QI
2. In Previous Period, move Stock to Unrestricted
3. Reverse Receipt in Previous Period
We have this happen often at period end, and this is the method we use to correct it.
I hope this helps.
Thank you,
Steven Coolbaugh

Deficit of SL Unrestr. prev. 1 EA : SP50192 1002 1002 (Message number M7021

Dear sir,
i made the po . i did the gr after that i did the quality inspection for the same quantity..
now stock is showing in MMBE for same material.
Now i wants return material through return delivry with respect to material documnet with movment type 122.
there is available stock in unristicted then why
system is giving messgae like
Deficit of SL Unrestr. prev. 1 EA : SP50192 1002 1002
Message no. M7021
Diagnosis
Shortfall below the specified stock level or quantity amounting to 1 EA.
System Response
If the message is an error message (E), the above is not allowed.
If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity.
Procedure
In the case of a warning message, check the quantity entered.
In the case of an error message, change the quantity or terminate processing.
Note:
The abbreviations in the short text of this message can have the following values:
BA = batch
OR = order
PL = plant
PR = previous period
PU = purchasing document
RE = reservation
SL = storage location
VC = consignment stock from vendor in storage location

Hi
i made the po . i did the gr after that i did the quality inspection for the same quantity..
now stock is showing in MMBE for same material.
Now i wants return material through return delivry with respect to material documnet with movment type 122.
there is available stock in unristicted then why
system is giving messgae like
check folloiwng point
1) As you said you did quality inspection for same material while doing GR,at that time what was stock type? i think it was quality stock not unristicted.
2) as you said availabe stock in unrestricted ,have you trasnfer stock from quality to unrestricted?
3) is it possible for to change stock type in material docuemnt for 122 while doing retuern? check which stock type is there while returning material
Regards
Kaials ugale

COGI error as Deficit of BA Unrestr. prev.

Hi
In COGI, I tried to clear wrong goods movements. But Inspite of stock available in storage location, system throws Deficit of Unrestricted stock and 0 goods movement successfully got executed. This is a batch stock. I verfied stock overview also, absolutely no problem. Batch stock available in unrestricted stock under specified storage location.
Is there any logic for stock posting as below:
1.My CO11N entry (261 mvmt) posting date was 26.11.2008. This means COGI got updated for the error goods movement with posting date 26.11.2008.
2. Stock transfer of error materials from other location to that specified location posted later to 26.11.2008 which means Posting date for 311 mvmt in MB1B was 30.11.2008.
Will it create probelm as Deficit Unrestricted stock as stock posting date is later than error posting date.

Thanks for your prompt reply.
It was posted thru CO11N only. It is not allowing to post in november. But it allows me to post on december.
November and December periods are open only.

Deficit of BA Unrestr. prev. 2.490 MT : CRC-F06-2B-T2-W 1100 M01 69274710 M

Dear Experts,
We receive the material through MIGO for Depot through z movement y56.after receiving the material,user allocate it to Sales order with 412E movement type he again canceled the with 411E movement type.but user mistakenly create two MIGO s.now he want to cancel one materail document created by MIGO with y56 z movement type.but its giving error message deficit unrestricted stock.but for that material batch is existed MMBE,please give me suggestion.
Reards,

hi,
Let me know when this Doc was made and when ie. aft how many day you are trying to cancel it...
If it is of last month and you are trying to cancel it in this month, then its not possible untill you use the previous posting allowed indicator in MMRV transaction...
Let me know your details....
Regards
Priyanka.P

QM Usage Decision Error : Deficit Batch restricted

I am unable to reject two batches..it shows 'no inventory exsists for this material'
Usage Decision TCode gives me the following error:
Deficit Batch restricted
Can you please tell me, what might be the probable reason?
Thanks

Well.. it's basically telling you it can't find the material in the stock category it is looking for it in.
So, to resolve this, first find out where the batches really are.
Get the actual batch numbers from the inspection lots and run MMBE to see where the material is and what the status of the batch is, restricted or unrestricted.
You must then figure out where is the UD transaction looking for the material? You can check this by looking in config and the looking at the settings for the inventory posting. You should see 3 movement types for the reject posting line. One for QI, one for unrestricted and one for blocked.
What you need to do, is a) get the batch inventory into the proper inventory bucket. This might be as simple as unrestricting the batch. b) if you can't get the material where it needs to be, you might be able to temporarily change the movement type used for the reject postings. Then change it back to what it should be once you rejected the material.
Hope this helps.
Craig

Error Deficit of PU IR quantity

Hi
W hen i tried to post goods reversal (102 MVMT) the error "Deficit of PU IR quantity xxxxxxx" coming
Could you please suggest what is the cause
Regards
Subbu

Dear,
Check the stock type from which you are doing reversal. Ex. from Quality inspection or Unrestricted stocl. Make sure in which stock quantity available. Try to reverse the stock from available stock type.
Regards,
Syed Hussain.

MIGO Cancellation Error

DearAll,
I am find some error while doing cancellation procedure in MIGO.
ERROR:-
Check table XMDVW: entry 110000000000087009 SF01 does not exist
    Message no. M7001
Diagnosis
    In table XMDVW the entry 110000000000087009 SF01 is missing.
Procedure
    Make sure your entries are correct.
    If table has not been maintained correctly, please inform your systems
    administrator.
How to over come from this problem? Kindly suggest me.

Hi,
check SAp Note:- 514954
Regards
Kailas Ugale

Database -551 error DB2 zO/S V9.1

Hello all,
I am getting this error when I try to perform various tasks from within the DBACOCKPIT. It specifically happens when trying to load SAPCL on a system that has been pached to SP13 for SAP_ABA and SAP_BASIS.
ST04: Table not found: DB2QPROF in connection
Database error -551 at EXE
> [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -551, ERROR: SAPR
> DOES NOT HAVE THE PRIVILEGE TO PERFORM OPERATION CALL ON
> OBJECT SAPCL #DSNT418I SQLSTATE = 42501 SQLSTAT
> RETURN CODE
> #DSNT415I SQLERRP = DSNXOSTP SQL
> PROCEDURE DETECTING ERROR
> #DSNT416I SQLERRD = 1186179 0 0
> -1 0 0 SQL DIAGNOSTIC INFORMATION
> #DSNT416I SQLERRD = X'00121983'
> X'00000000' X'00000000' X'FFFFFFFF' X'00000000'
> X'00000000' SQL DIAGNOSTIC # INFORMATION
>
> #
Database error -551
DX1: true (see SLG1 object DBACOCKPIT)
ST04: [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -551, ERROR: SAPR3PRIVILEGE TO PERFORM OPERATION CALL ON OBJECT SAPCL
Thanks
Andy Howard

Apparently with SP13 you now need sysadm authority to load SAPCL.

Error :Deficit of BA Unrestricted-use

Hi
We have a batch job to perform the automatic usage decision of the Inspection lots.
This batch job after changing the status of inspection lot moves the stock mentioned in the inspection lot to unrestricted-use .
for one of the inspection when it is trying to do that movement we are facing this error
"Deficit of BA Unrestricted-use 3,204.00 EA : 550-500712 US35 MC01 42122419T"
What is the reason for this error
can you please help me ?
Thanks and Regards
Ramakanth Akunury

Hi Nikhilesh
thanx for ur response .
In the table for the particular batch the Quantity is present in the "In Quality Inspection" . We are trying to move it into "Unrestricted-use "
Thanks and Regards
Ramakanth Akunury

Error :Deficit of BA Unrestricted-use 1 EA : S07_SUB_ROT20 0001 0002 000000

Hi All ,
In Component Maintaince scenario planned modification (external operation first and internal second) . when i come to internal part and carry out transaction mb11 with order number "XXXX" there i get the error "Deficit of BA Unrestricted-use 1 EA : S07_SUB_ROT20 0001 0002 000000" i have checked the unrestricted stock its available .I am not sure why i get this error.
Kindly help.
Thanks
neelam

You should see the batch number field directly in the item overview of MB11.
lets put the message apart:
S07_SUB_ROT20 0001 0002 000000
S07_SUB_ROT20 is your material number
0001 is your plant
0002 is the storage location
000000 the batch number
this bach number 000000 does not have unrestricted use stock in location 0002 of plant 0001

MB1A, mvmvt type 551 error while scrapping serialized Tool

User tring to scrap a serialized Tool using mvmt type 551 , T code Mb1a but as soon as enter serial number system throws the below errror message.I have checked GR in Migo and this serial number exist in IQ03 not sure what do now?
System status INAC is active (EQU 10009104)
Serial number A244MY41HW0687 cannot be used here

Hi,
Before Scraping the Serial Number Status should be ESTO... then only you can do scraping... the Status INAC means the Serial Number is inactive... so you are geting the error.
To Activate the Serial Number please do the follwoing.
1. Txn. IQ02..
2. enter the Material number and serial number..then hit enter..
3. From the menu...MatSerialNumber>Function>Activate<->Inactive-->Activate
Regards
GK.
Edited by: Gnana Kumar on Nov 19, 2010 7:40 AM

Cancellation of Migo - Excise Error in J1IEX

Hi
We have cancelled Migo vide No. 5000083706 , while cancelling the Excise the following error is appearing
' Material has not been declared as input Material in'. please reply.

Hi,
Use J1ID under cenvat determination enter input & out put material. Here you can use both same materials.
Have you captured and posted Excise invoice? After GR if S then carries out Ji1ex Post Excise invoice under miscellaneous tab enter rejection code and save.
Then again in J1IEX select option of cancel and enter invoice no and post it will be cancel. If require you can do fresh GR and Excise invoice posting for the same vendor invoice no.
Rgs

MIGO posting Error

Hi MM Gurus,
I am getting the below error while doing the Goods Receipt for PO in transaction MIGO.
"Check table 169P: entry SAN1 does not exist"
Kindly help to overcome the error.
Thanks and regards
Murugesan

Hi,
During creation of Co.code, Did copied co.code properly from Std.Co.Code? Pl check it?
AND
Maintain Company Codes for Invoice Verification
IMG--> MM->Log. Invoice Verificationsss>incoming invoices->maintain default valeues for Tax Codesss
Regards,
Biju K

MIGO Transaction Error

Dear All,
             We are facing error in MIGO Transaction,after applying
PATCHES In Development Server.
The Particular Include-Program which is containing Data Variables after
application of Notes was resetted.That Include program is not allowing
to change also.It is giving following message.
Carry out Modification Comparision for REPS LJ1IEXTOP First.No changes Possible.
    Please give suggestion accordingly.
Thanks and Regards
   BalaNarasimman.M

Hi BalaNarasimman,
Normally after applying the patch try to do SPAU adjustment and retain the latest code (i,e If you have applied notes that is for latest package)..Else the OSS notes relevant to the package must be searched and it must be applied again. What is the error that you are getting..? What is the CIN package?
Thank You.
Regards,
Uma

MIGO 551 Error Deficit of BA Unrestr. prev ..

Similar Messages

Maybe you are looking for