Migo - BATCH NO. COULD NOT BE DETERMINED error

In transaction MIGO, while entering the product receipt details, user is
getting error message, BATCH NO. COULD NOT BE DETERMINED. Earlier this
job was done by different USER. Now he has left and all the roles are
assigned to different user. But when this user logs in and tries to do
MIGO, it says 'BATCH NO. COULD NOT BE DETERMINED.'
please help me out.

what about if you debug right ot the point where the message gets processed? One or some more lines above you can find the reason WHY it gets processed, this again should give you an idea on how to overcome the problem.

Similar Messages

ITunes cannot sync apps to the iPod because the apps installed on the iPod could not be determined error message

I've been getting the "iTunes cannot sync apps to the iPod because the apps installed on the iPod could not be determined" error message for a while. I have tried restoring my iPod but as soon as I try to sync it again (even with nothing changing in iTunes or on the iPod) I get the same error message. Whenever I want to add music to my iPod I have to delete everything and then wait hours for it to restore which is ridiculous. Anyone have any other suggestions for fixing this problem?
I'm using a 3rd generation iPod touch with 4.2.1 software and iTunes 10.5.3.3

The fact that there is so many discussions with no clear answer is the problem.
I went back and looked through all the different suggestions and and tried them all to make sure I didn't miss anything. What finally worked for me was making sure all apps were updated on the iPod and making sure all apps were updates in iTunes (under the Library>Apps tab NOT under devices) and then syncing.

Alchemy for xfi - the product state could not be determined (error 6

as the title states I have xfi platinum & installed alchemy for xfi, tried to start it & I get "the product state could not be determined (error 60)" I click any of the links & it takes me to the buy page for the audigy alchemy. I've tried uninstalling & reinstalling multiple times, also uninstalled & reinstalled my xfi drivers. No change. I can enter anything into the entry field on the activation page & It'll advance me to the next page, then when it goes to connect to creative to register. I get another error. "an error occurred while attempting to connect to the internet. (00000)" I dont have anything blocked regarding this program & have tried with my firewall disabled. Please. Help

Well I didnt follow the link, but a kind person did download an update for Windows for me, if i can find link i will post it is from USA, took over 2 hours to install/update but appears to fix this problem, i now have all the bits that windows left out back on pc, so there is a solution out there, i know the site it came from there had been 80,000 downloads in over 2 days.

Error - The attributes for user could not be determined

When I login as a Buyer (with role ZTSX_EC_BBP_PURCHASER - copy of SAP_EC_BBP_PURCHASER), I get the foll. error while trying to Process Purchase Orders:
The attributes for user could not be determined
It does not happen on other transactions (like Sourcing or Issue POs).
The buyer is in the org. plan and I have checked the attributes and they seem ok.
What could be the issue ???
Thanks
-Bakulesh

Hi
<b>Please go through these links -></b>
The attributes for user could not be determined --
'Error in writing attributes' when using function tab
Company code for system missing in user attributes
BBP_POC not working in SRM 5.0
Re: urgent: regarding ATTRIBUTES
Regards
- Atul

Error the actual price could not be determined while executing CKMLCP

Hi!
we are facing the problem while executing CMLCP, the error message is "The actual price for 10VN000012/MHR could not be determined" ( error message number CKMLLA102).
Our scenarios is as below:
we have 4 activity types out of which activity type "MHR" are used only for Indirect activity allocaiton tracing factor that means all service costs from service cost centres will be distributed to production cost centres in the ratio of actual quantity confirmed for MHR activity type.
for this activity type we will not have any actual cost distribution, so there will not be any actual cost for this activity type.
So, as actual quantity is confirmed during production process and while executing CMLCP is expecting actual price for the same ( we are executing KSII for actual activity price calculation before costing run). is there any enhancement to avoid this error, because our client don't want to allocate cost to this activity type.
regs,
ramesh

Hi Ramesh,
Message CKMLLA102 is standard system behaviour when the actual
price of an activity is zero because cost center accounting does not
allow actual prices to be zero.
Unfortunately the system can't distinguish an actual activity price
of zero from a not yet calculated activity price, so for activities
with actual price zero the message CKMLLA 102 is sent.
Have you check the SAP note 361379?. It provides you some options to overcome
the issue.
Best regards,
MLM

Batch Job for ME59N getting error SE133 - Net value could not be determined

HI,
We can convert the PO automatically when run manually tcode ME59N successfully.
But when We schedule a batch job to run ME59N (RM06BB30) to create AUTO Purchase order for services item Purchase requistion.
Getting error message SE133 "Net value could not be determined". PO canot be converted automatically.

Hi,
Price/ Net value not picking!
Check info record based on Material Group for your service PR which need to be converted to PO.
Also check activation of Automatic Purchase order creation for Service requisitions in t.code: ML91.
Check vendor master , schema group of vendor and check MM pricing procedure, the availability of condition type for service master for service PO.
For more please read note 635511
Regards,
Biju K

Getting an error "Customer could not be determined" for IDOCs in SCM 7.0

Hi Friends,
I am executing the report RSMIPROACT in ECC 6.0 system to publish Demand and Stocks into the SCM 7.0 system.
The IDOC is processed without any errors in ECC 6.0 . However, in the SCM 7.0 system , the IDOC fails with the error.
I have noticed that 2 things .
1. E1ADRE1 field is NOT being sent by the ECC system .
2. I get the same error even if I manually add this field and add value 300 or 301 for the qualifier field.
Has anybody faced this problem before ?
I look forward to replies.
Detailed error is given below.
Regards,
Ranjini.
Customer could not be determined
Message no. /SAPAPO/EDI010
Diagnosis
The system must determine the customer number from the IDoc data in order to update stock and sales figures for customers. It uses the additional section E1ADRE1 with the qualifier '300' or '301' in the vendor address section to do this. The customer number stored here should have a valid customer number in the APO System.
The section was not available in the processed IDoc.
System Response
The system cancels processing.
Procedure
Configure the EDI convertor in such a way that the corresponding section has a value.

Hi Ranjini,
Please look into the following
1) Customer master data is fully maintained
2) Customer number ranges are fully defined in customisation
3) Customer address details are maintained
4) Is there any special characters used while defining customer data or customer
number like $, #,[ etc.,?
5) Customer int models are active in SCM side prior to IDOC processing (including
customer, demand, stocks etc)
Please confirm your findings
Regards
R. Senthil Mareeswaran.

Error "codepage could not be determined for the receiver-system"

Hi,
we use the idoc-adapter to send message from mySAP ERP to PI.
All worked fine.
So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
When I start transction "we05" in mySAPERP" I get the following error:
"codepage could not be determined for the receiver-system" status 02.
I have changed the datatyp to "char" but the same probleme
Can anybody help me please?
Regards
Stefan

This error shouldn't occur unless there is some modification at the OS level codepages.
Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
Regards,
Prateek

Error message while CREATING PO - PGrp could not be determined

Hi all,,.
We are on SRm 7. ECS.
The issue we are facing is:
WHen I click on CREATE PURCAHSE ORDER trasnaction,I get this message "Purcahsing group could not be determined;Inform system administrator".
Edited by: nmsrm1234 on Nov 10, 2011 2:09 AM

Hello,
The error is coming because to create PO directly you have to be a Purchaser,you need to belong to a purchasing group in SRM.In PPOMA_BBP Assign your user id below a purchasing group directly or right click the present position and go to 'Assignment-->Purchaser Assignment', select a purchasing group and save.
Then Try creating now a purchaser order directly .
Regards,
Neelima

PY error message - EE's salary group could not be determined for Plan Life

We are running through Payroll errors when there is a Separation action being carried :
u201DEmployeeu2019s salary group could not be determined for plan LIFEu201D.
On IT0168 the costs are u20180u2019
This has to be resolved ASAP. Any inputs/ advise is greatly appreciated.

During the "Separation" action, does the employee change WT on IT0008?
If so, it could be that the Life Plan's Calculation Base does not include that WT (and check the IMG under Payroll > Benefits Integration > Define WageTypes for Benefit Plans)

Error:The grouping element could not be determined for project

Hi,
When I am trying to issue goods for a project,I am getting the following error
"The grouping element could not be determined for project 1., plant 2., and MRP group 3.."
what may be the reason for this reason.
Regards,
Raju

Hi,
You are using Automatic Requirement Grouping in your project and there is some issue with the Material Master,please check the Material Master Views.
Muzamil

BDC Error - Codepage could not be determined

Hello Gurus,
We are having a problem with BDC in transaction VF01.
The return message is FES-025 "Codepage could not be determined".
First of all the details and what have been done so far:
- The funcion module with BDC is called by an EDI message that is send on the creation of the SD Invoice.
- In Online mode, no errors are raised;
- The errors are only raised when the program runs in background - Manual processing of EDI message via T-Code WE19 (online mode) runs with no problems;
- In DEV enviroment, everything runs smoothly (both online and background modes) and we achieve the required result;
- In QAS enviroment, with exacly the same versions of code, the background process fails;
- Both DEV and QAS work on the same physical machine, on different instances.
I've searched quite a lot about this error and most results talk about the usage/call of GUI_UPLOAD or GUI_DOWNLOAD. We are NOT using this type of funcions in our code (or something that would connect to the client).
Any ideias?
Thanks in advance, best regards,
João Argêncio

Some additional informations:
- The sistem is non-unicode;
- The EDI message source and destination are the same machine (inter-company process);
- The user assiciated in IDoc Config has SAP_ALL privileges;
- Both systems are in the same release levels (ECC 5);
- All IDoc configuration is equal in both DEV and QAS instances.
If you need any additional information just let me know.
Thanks oin advance, best regards,
João Argêncio

Getting error "Codepage could not be determined" in background job

<i>Hello Friends,
I am running a background job with a variant and the job get cancelled with the following error message.
Codepage could not be determined
Message no. FES025
Please give your valuable comments.
Thanks,
Senthil</i>

Hi,
Check the oss note 765763(Setting the upload/download codepage for a SAPGUI connection) released for this purpose, as per the documentation of this note, you need to modify the standard program LSFESF03 in order to get rid of this error,
Also check the note 882961(File download: codepage conversion error FES024)
Hope this helps,
Rgds,

Error during EA16manual billing ' AH632 - Tax code could not be determined'

Hi,
During manual billing t code EA16, we are getting following error.
'Tax code could not be determined'
Actually there is no tax code given in configuration for the subtransaction which I am using for manual billing. Whether anyone has any clue?
Regards,
Jayant

Hello,
2 reasons
1. Check any where in the Bill/Invoice you have selected tax code <either directly or indirectly>
2.Assuming that Tax code is mandatory, why do not you assign a 0% tax code <either A0 or V0> in EK02?
Hope this helps
Rgds
Rajendra

Error during SC creation - Jurisdiction code could not be determined

Hi All,
For testing purpose , I have set up one user id. While creating SC with that ID, I am getting one error, it says "Jurisdiction code could not be determined ".
Plant , company code everything enetred in the SC is perfect.
On another hand, I can create SC with my id without any error..
Attibutes are identical of both the user ids.
Can someone help me to know the reason for this particular case
Regards,
Sheetal

Hi
Jurisdiction code is determined based on Ship to Address data of the shopping cart and the country code. Pl check if the ship to address in the shopping cart is correct. It might be missing mandatory informations like Postal code, city, District.
Regards,
Sanjeev

Migo - BATCH NO. COULD NOT BE DETERMINED error

Similar Messages

Maybe you are looking for