MIGO Cancellation Error

DearAll,
I am find some error while doing cancellation procedure in MIGO.
ERROR:-
Check table XMDVW: entry 110000000000087009 SF01 does not exist
    Message no. M7001
Diagnosis
    In table XMDVW the entry 110000000000087009 SF01 is missing.
Procedure
    Make sure your entries are correct.
    If table has not been maintained correctly, please inform your systems
    administrator.
How to over come from this problem? Kindly suggest me.

Hi,
check SAp Note:- 514954
Regards
Kailas Ugale

Similar Messages

Migo -cancellation -QI lot

sap experts,
while migo cancelation (movt 102) ,following error has been throwed
""Deficit of PU IR quantity 129.000 PC.""
in MMBE QI stocks are available 129 .this is Subcontract material ,which comes to QI stock directly ,but User decision (UD) not given.and
no batch management activated.
kindly give me soloution.
thanks,
kumar.

Hi,
As the material is still lying at QI, you will have to mark the lot to be returned to the vendor. Then GR reversal will be possible.

Code of Conduct - Saving was canceled , error key: RFC_ERROR_SYSTEM_FAILURE

Hi all,
we configured all kinds of ESS scenarions in EP 7.0 Portal.
I get an error, when I try to to this in the Portal:
ESS --> Corporate Information --> Code of Conduct -->
then I check the "I accept..." Button and click on review. Now, when I click Send on the next screen, i get the error message:
Saving was canceled                                                 , error key: RFC_ERROR_SYSTEM_FAILURE:
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException:      Saving was canceled                                                 , error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callRFCIsrProcessEvent(FcISRProcessEvent.java:828)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEvent.callIsrProcessEvent(FcISRProcessEvent.java:380)
     at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEvent.callIsrProcessEvent(InternalFcISRProcessEvent.java:1234)
     at com.sap.pcui_gp.isr.isrprocessevent.FcISRProcessEventInterface.callIsrProcessEvent(FcISRProcessEventInterface.java:127)
     at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:409)
     at com.sap.pcui_gp.isr.isrprocessevent.wdp.InternalFcISRProcessEventInterface$External.callIsrProcessEvent(InternalFcISRProcessEventInterface.java:577)
     at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.VcISRButtonsReview.onEvent(VcISRButtonsReview.java:254)
     at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.wdp.InternalVcISRButtonsReview.onEvent(InternalVcISRButtonsReview.java:196)
     at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.VcISRButtonsReviewInterface.onEvent(VcISRButtonsReviewInterface.java:164)
     at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.wdp.InternalVcISRButtonsReviewInterface.onEvent(InternalVcISRButtonsReviewInterface.java:148)
     at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.wdp.InternalVcISRButtonsReviewInterface$External.onEvent(InternalVcISRButtonsReviewInterface.java:228)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:533)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.access$600(FPMComponent.java:78)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.raiseSaveEvent(FPMComponent.java:951)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.raiseSaveEvent(FPMComponent.java:1114)
     at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.VcISRButtonsReview.submitForm(VcISRButtonsReview.java:233)
     at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.wdp.InternalVcISRButtonsReview.submitForm(InternalVcISRButtonsReview.java:188)
     at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.ButtonsReviewView.onActionSubmit(ButtonsReviewView.java:151)
     at com.sap.pcui_gp.isr.isrprocessevent.buttonsreview.wdp.InternalButtonsReviewView.wdInvokeEventHandler(InternalButtonsReviewView.java:161)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:779)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:714)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
     at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1255)
     at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:325)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:826)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:759)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:712)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException:      Saving was canceled                                                 , error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at com.sap.pcui_gp.isr.isrprocessevent.model.IsrModel.isr_Process_Event_Wd(IsrModel.java:406)
     at com.sap.pcui_gp.isr.isrprocessevent.model.Isr_Process_Event_Wd_Input.doExecute(Isr_Process_Event_Wd_Input.java:137)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
     ... 65 more
Can anyone help us out with this problem??
Many thanks and best regards,
Jasmin

hi
jasmin,
Could you check if the RFC user in R\3. and the connection that exists b/w EP and R\3.
You are getting this error due to the connection error between the two system.
Check if this is configured correctly and is working.
Thanks
Santoshi

"Submit cancelled" error

Can someone please help me figure out why I keep getting a "Submit Cancelled" error when clicking the Submit button (Master Page)?
After the preSubmit script verifies that required fields (first page only) are filled in, it should generate an email, but "Submit Cancelled" stops everything.
Document has been posted at https://acrobat.com/#d=7Uqs6BsWpNjJzrz9k79m0g
Thanks! ~Carol

Niall -
The size of the graphic is very small, but I can take it down more, so will do that.
But it's obvious that embedding the two fonts is the biggest culprit - I didn't realize. The end user requested a distinctive font for responses, which is why I chose Courier, which they like. I just assumed Arial and Courier were very common, as most agencies completing the form will not have many extras on their computers. What would you suggest? Or would I be safe to just stay with those two and not embed?
Srini assisted me with the preSubmit even code to control the Subject, Message and Email addresses so I could customize the subject and message body, which is why there is nothing in the Submit to URL spot.
So now, with no fonts embedded and (temporarily) no graphic, the form size went down from 1,983 KB to 53 KB (wow!!), but I still get the "Submit Cancelled" error message.
The original is still at https://acrobat.com/#d=7Uqs6BsWpNjJzrz9k79m0g
The smaller version with no fonts embedded is at https://acrobat.com/#d=XX9YGkyp81nqkitAiGQ9-w
Thanks (yet again)! ~Carol

Abode X "Scanning Canceled" error

I am using Windows 7 (64 bit), my scanner is HP ScanJet 5590 with the latest drivers (64 bit).
I upgraded to Adobe X last week, every time I try to scan using the WIA scan option a screen flashes too fast to read and then the "Scanning Canceled" error message (Adobe's spelling not mine) pops up. I have found that if I use the TWAIN scan option that I can get it to work, I prefer the WIA as the B & W image handling is better and file size smaller. TWAIN B & W is illegible and I am forced to use color.
Why won't the WIA scan option work?
It worked just fine in Adobe 9 with all of the same drivers and operating system. Given that, it seems to be an Adobe X problem not an HP driver issue.
I downloaded the HP scanner diagnostic and ran that, comes up clean.
Any ideas? I see that I am not the only one.

Hello Lary
Try this steps.. hope it will work
1: Go to Create >> PDF from Scanner >> Custom Scan
2: Select the scanner from Scanner dropdown button.
3: Click on button "Options" next to scanner dropdown list.
4: In the User interface, select Show Scanner's Native Interface.
5: Now click on Scan button.
You will be shown the manufacturer's UI now wherein you can specify if you want to preview the image and select the desired area for scan.
or
maybe Trick is in selecting flat bed or paper feeder. Last is default.
In configuring pre-sets after selecting the scanner choose options.
Make sure it is set to native modus and show scanner interface. Save this.
Try adapted scan first, lets you choose between the flat bed or the paper feed.
Brings you to scanner's interface and scans.
Next time just select the scan function you want (not adapted).
Brgds,
Creator M.P.
www.apartmani-vrtlici.com

Action Cancelled error

I've created a BSP iview connected to a backend r/3 system. We have
Portal server > f5 load balancer-> r/3 landscape.
With some frequency, we get an "Action Canceled" error. Sometimes as soon as somebody clicks on the iview, sometimes after they have been using it for a minute or two, and sometimes they don't get it at all.
I basically have 2 questions: 1) What tools do you know of that will help debug this issue 2) Has anybody else experienced this problem.

hey scott,
Could you please elaborate how the issue was resolved.
I have a similar problem here.
Thanks
rocky

DIFF BETWEEN MIGO CANCELL & MBST

Dear All,
Can any one explain me that what is the difference between Cancellation by MIGO & Cancellation by MBST when excise invoice is captured & posted .
regards
sap11

thanx pts given
sap11

ASN Cancel Error : RCV_ASN_NOT_ACCEPT, RCV_NO_MATCHING_ASN

Hi All,
I am getting below error at the time of cancelling ASN through API.
"ASN Not Cancelled Error: Shipment ASN-6370 does not have matching ASN. Error: All ASN lines for shipment ASN-6370 failed. Either the profile ' RCV: Fail All ASN Lines if One Line Fails' is set to Yes, or all of them belong to single LPN group id, or each line contains an error."
I have checked for ASN profile ' RCV: Fail All ASN Lines if One Line Fails', It Is No. Also I have checked with all values which are correct like organization and all.
Appreciate immediate reply.
Thank You,
Ravi Raj.

Ravi,
I don't see any similar issues reported internally so please log a SR for this issue.
Thanks,
Hussein

Cancellation of Migo - Excise Error in J1IEX

Hi
We have cancelled Migo vide No. 5000083706 , while cancelling the Excise the following error is appearing
' Material has not been declared as input Material in'. please reply.

Hi,
Use J1ID under cenvat determination enter input & out put material. Here you can use both same materials.
Have you captured and posted Excise invoice? After GR if S then carries out Ji1ex Post Excise invoice under miscellaneous tab enter rejection code and save.
Then again in J1IEX select option of cancel and enter invoice no and post it will be cancel. If require you can do fresh GR and Excise invoice posting for the same vendor invoice no.
Rgs

Migo-Cancelation of good receipt.

Hi gurús:
Im trying to do a cancellation of a good receipt. The material have active the inspecction setup in the material master record. The system, during good receipt, create an inspection lot, but the material doesnt have an inspection plan creat it. Its not posible create on, because the material type is not aasing to the task list type Q(Inspection plan). So it is not posible take a usage decision for the inspecction lote.
The material is in quality inspection, and when i try to do the cancellation of the good receipt, the system shows me the following error message:
"Change the inspection stock of material XXXXXXX in QM only"
Changes in the quality inspection tab of the material master record are not posible, becuase exist material with quality inspection status.
I do not know how to cancel the MIGO document
Thanks in advance for the help
Regards
Enzo

YOu have to clear the document first form the QM than only you can reverse the document so do what ever you hae to do for the QM setup point of view than clear the document and undo your settings in QM if oyu don;t need for future.

"Open project was cancelled" Error Message

When I try to open any RoboHelp X5 projects, I receive the
following error:
Open project was cancelled or the application was unable to
load database for "C:\Documents and
Settings\jdoe\Desktop\Project_Name\Project_Name.cpd"
The only change I've made recently that may have affected
RoboHelp is that I installed SQL Server last month... maybe it
messed up the database configuration.
I've done the following and have run out of ideas:
* Disabled SQL Server
* Uninstalled SQL Server
* Deleted the .cpd file for a project
* Attempted to open a project using the .hhp file
* Uninstalled and reinstalled RoboHelp
I'd greatly appreciate any suggestions.
Mary

I know some great bars! Far more fun than fixing this but I
guess you have to.
Was RH reinstalled with your logon (the one you are using
now) and did that have admin rights attached. If it was installed
by an IT person with their logon, start again.
Try trashing the CPD and the XPJ.
Try creating a new project, saving it and reopening it. If
that works, also create a printed output from it.
There are topics on my site about installing RH and opening
corrupt projects.
Let us know how that all goes.

"The query was cancelled" error after upgrade from 10.1.3.3.3 to 10.1.3.4.2

Hi,
I was using OBIEE 10.1.3.3.3 /. After upgrading to 10.1.3.4.2 , the queries are not running ( long running queries alone) as expected. and so all the campaigns iwh tlong running queries are cancelled and the error message is seen in the xml log in Marketing jobs management.
We have upgraded the OBIEE version from 10.1.3.3.3 to 10.1.3.4.2 yesterday after which the connectivites have been checked with SQLPLUS and they are working fine. But when the campaign has been loaded, the Analytics have received the request for the segment query and after longer run, the task has been cancelled with the error message "The Query was cancelled as mentioned below in the Job Stats
<jobStats>
<jobID>2</jobID>
<jobType>WriteListFiles</jobType>
<jobUser>userid</jobUser>
<jobState>Error</jobState>
<jobTotalMilliSec>1h 41m 21s 160ms</jobTotalMilliSec>
<jobStartedTime>2012-03-22T08:06:13Z</jobStartedTime>
<jobFinishedTime>2012-03-22T09:47:34Z</jobFinishedTime>
<jobIsCancelling>N</jobIsCancelling>
- <exception>
<message>Job request of type "WriteListFiles" failed.</message>
- <exception>
<message>Error executing the list generation SQL.</message>
- <exception>
<message>Error in executing cursor for WorkNode (Id:0)</message>
- <exception>
<message>The query was cancelled.</message>
</exception>
</exception>
</exception>
</exception>
</jobStats>
Please let us know the suggestions
So far, the unaccessedtimingrunoutminutes tag has been tried to set 50 under ODBC tag in instanceconfig.xml. and the defaulttimeoutminutes has been tried to set to 150 in the same instanceconfig.xml.
along with that the rpd changes are done. For all the users apart from the Administrator, the timeout has been changedfrom 10 minutes to 150 minutes. But still that way is not working.
The segments was fired with the Administrator login. So , if the timeout for admin login can be set, i assume that the problem might be solved. Please let us know ur suggestions here too.
If that is the case, when we open rpd , only for Administrator user and group, the Permissions button is disabled. So i want to know how to change for Admin user settings in rpd..
Please advice us on the same.
Regards,
Madasamy M.
Edited by: Madasamy Murugaboobathi on Mar 26, 2012 1:40 PM

The issue has been resolved by setting the following parameters
<UnaccessedRunningTimeoutMinutes>120</UnaccessedRunningTimeoutMinutes>
<DefaultTimeoutMinutes>120</DefaultTimeoutMinutes>
<ClientSessionExpireMinutes>120</ClientSessionExpireMinutes>
<ConnectionExpireMinutes>120</ConnectionExpireMinutes>
<UIDefaultTimeoutMinutes>1440</UIDefaultTimeoutMinutes>

MIGO posting Error

Hi MM Gurus,
I am getting the below error while doing the Goods Receipt for PO in transaction MIGO.
"Check table 169P: entry SAN1 does not exist"
Kindly help to overcome the error.
Thanks and regards
Murugesan

Hi,
During creation of Co.code, Did copied co.code properly from Std.Co.Code? Pl check it?
AND
Maintain Company Codes for Invoice Verification
IMG--> MM->Log. Invoice Verificationsss>incoming invoices->maintain default valeues for Tax Codesss
Regards,
Biju K

MIGO Transaction Error

Dear All,
             We are facing error in MIGO Transaction,after applying
PATCHES In Development Server.
The Particular Include-Program which is containing Data Variables after
application of Notes was resetted.That Include program is not allowing
to change also.It is giving following message.
Carry out Modification Comparision for REPS LJ1IEXTOP First.No changes Possible.
    Please give suggestion accordingly.
Thanks and Regards
   BalaNarasimman.M

Hi BalaNarasimman,
Normally after applying the patch try to do SPAU adjustment and retain the latest code (i,e If you have applied notes that is for latest package)..Else the OSS notes relevant to the package must be searched and it must be applied again. What is the error that you are getting..? What is the CIN package?
Thank You.
Regards,
Uma

Segment release cancellation error

When I attempted to perform "Cancel Release" on segment type ZE1MARAM in ECC6.0, I encountered the following error message: "Error while resetting release of segment ZE1MARAM" I didn't have the problem when I performed the same action in 4.6c. Our Basis team investigated the issue and concluded that this is not a security-related error? Does anybody here have seen this error before? What was the cause and fix?
Thanks,
Ning

Hi,
If you want add a new field..in the menu..segment -> add version..
now you can add a new field...
Thanks
Naren

MIGO Cancellation Error

Similar Messages

Maybe you are looking for