MIGO Error - Account 6500029 requires assignment with CO object

Hi Experts,
I am facing problem with new material code opened recently. Valuation class assigned is ZSTD.
At the time of GRN, It is giving an error msg :
Message no. KI235. Account 6500029 requires assignment with CO object.
Kindly note I am not making an account assignment P.O. It is a normal P.O.
Previously also with same valuation class, we have received no. of materials with out any error.
It should post the material to my inventory account 1220000 as it did with materials of the same valuation class earlier. I don't know from where it is picking GL 6500029.
Kindly help.
Regards,
Rajneesh Gulati

Hi ,
In OBYC kindly check the Key BSX for the GL account assingment to the valuation class .
As inventory accounts are Balance sheet accounts and do no require an assingnment to a cost element .
If your account is getting changed then check the same in OBYC - BRX .
Regards ,
Dewang T

Similar Messages

Error in VF44 require assignment of CO object

Hello SAP Gurus,
We are executing VF44 for Sales order (sales order line has account assigment as WBS element) an error messsage - Ledger Account require assignment of CO object.
What to do in this case to resolve this.
Regards

You use a income account and it is cost element also and you have to assign a co object but cost centers are statistical posting object for income cost elements so you have to use a PA object. If PA is not active do not create cost element for that income account. Delete cost elemenent. If you can not delete or if you want it to be a cost element then create a dummy internal order for revenue carrying account assignement object...

GL account requires assignment to CO object

Dear All,
While preparing excise Invoice the accounting document is not getting released. On going to T-code VFX3 and tyring to releasing the document message comes as "Account 00000 requires assignment to CO object".
Kindly guide on this issue .
Thanks in advance.

Hi
I think it comes form the Account assignment tab in Item / header level of sales order where we mantain the Business Area.
just check the settings (Path -
ENTERPRISES STRUCTURE>ASSIGNMENT>SALES AND DISTRIBUTION>BUSINESS AREA ACCOUNT ASSIGNMENT

Gl account require assignment to Co object

Hi
while doing PGI .it is giving error of "account require assignment to CO object"
please clear where to assign Co object & how.
do i need to assign the Gl in okb9 seeting

hi,
First identify GL account which you have assigned in OBYC . then go to FS00 and enter your account no. and press on Edit Cost Element in that there is 3rd tab page Default account assignment there give cost center and save it.
Now try once again.
thx.
Ganu

Revenue GL assignment with CO objects

Sir,
Can anyone tell me where Revenue GL (3*) where we need to assign with CO object other than OKB9.
As in my system no revenue GL are assigned in OKB9, I just wanted to know are there any other way of assignment. Just for my knowledge.
Abhisek

Hi,
There are two ways of assigning viz. OKB9 or cost element master data itself.
1. Go to FS00
2. Enter the GL Code.
3. Now click on Edit Cost Element button.
4. Go to Default Account Assignment tab.
5. You may define the CO object here i.e Cost center or order
Regards,
Jigar

Error: "Account Symbol NOT Assigned to Flow Type".

Good Morning,
When I runs transaction RERAPP, I got this error message: Account Symbol NOT Assigned to Flow Type.
However I reviewed the configuration specifically "Assigned Account Symbol to Flow type", and the account symbol is there.
I mean is already assigned to the flow type.
Do I have to review in any other place? What else I need to do?
Regards,
Hector

Hi Hector,
Please make sure that for any Reference Flow Type that you assigned for all the Flow Type Relations (check if you have all the needed relation that you need) (V_TIVCDFLOWREL) you have a correspondent (V_TIVRAACCDET - Account Determination Value).
Regards,
DAS

Account 891000 needs assignment to CO Object

While doing GR for subcontracting goods, I encountered an error saying Acc 891000 does not exist in CC 1000, when i created one using FS00, the error comes as ' it needs assignment to a CO object'.... Hw do i go with this....

Hello
Go to customizing task OKB9
Copy an entry and use your 891000 account.
Regards
Kedar Kulkarni

FRM-18108 Error when opening a form with subclassed objects

Dear Group,
I have 2 forms in Oracle Forms 6i. One of the forms contains an object group. The other form contains the object that I subclassed it to.
When I open the form that contains the subclassed object group, I get the FRM-18108 error.
If I open the form with the original object group, then open the subclassed form, there is no error.
Does this mean I must always open the original form in order to work on the one with the subclassed object group?
I hope there is an simple solution to what is something I am missing in my Oracle Forms setup.
Thank you in advance.
Emad

Hi Duncan.
Your suggestion worked.
Thank you for the fast response!
Truly,
Emad

Account 233000 needs assignment to CO Object

Hi
Im trying to post differences in Physical Inventory and this error appears. What are the possible reasons and how do I fix.
Vishnu

Hi
For G/L account 233000 you will have to maintain these details in FS00 in Edit cost element tab.
Regards,
Sourabh

Account 1910116 requires an assignment to a CO object

Hi,
I had error: Account 1910116 requires an assignment to a CO object when i tried to post to GL Account 1910116. Then I input the cost center. Then i got Enter a true account assignment object with revenues error.
Please advice me on the matter.
I would appreciate if also can advice where is the setting for tru account assignment.

Hi,
it shows that ,You made an account assignment for A/C 1910116, a revenue element, in controlling area 4444 to a cost center or profit center.
Cost centers and profit centers can carry revenues in the SAP system as statistics only. To ensure reconciliation between FI and CO for revenue element 1910116, a CO account assignment object must record the revenues as a real value. This object type is used for updating to the reconciliation ledger.
In principle, it is possible for the SAP system to automatically derive this CO account assignment object, the reconciliation object. However, all postings made in CO for costing-based Profitability Analysis are logged in the reconciliation ledger under "reconciliation object". In this manner, the reconciliation ledger identifies the exact values flowing into the operating profit. If you post reconciliation objects during revenue postings to cost centers or profit centers, you must do so while keeping the interpretation of the reconciliation ledger reports in mind. The sums of revenue postings to profitability segments, cost centers, and profit centers cannot be broken down further.
To avoid posting to reconciliation objects, make account assignments to a real CO account assignment object.
or else, you can change the message controll ,following below mentioned path :
Controlling --> General Controlling --> Change message control
Hope it helps.
Dhara.

Account 123456 requires an assignment to a CO object

Dear all,
We want to do a manual posting into the Excise Duty on Sales G/l through F-02 but system is throwing an
error Account 123456 requires an assignment to a CO object even if give a cost center then also the problem exists.We have maintained Default Cost center & Cost Element in OKB9 & then when we are doing entry then the system is through error complete PA transfer structure Fi Message no. KF018.
Regards
D RANA

Dear SAP Student,
Is the data of with element category 1 do not flow to COPA??? & if yes how can we change the cost element category as we have already data posted with cost element category 12.
Waiting for your reply....
Regards,
D Rana
Edited by: Deepak Rana on Mar 13, 2009 10:04 AM
Edited by: Deepak Rana on Mar 13, 2009 11:38 AM

FBCJ : 'Account 302024 requires an assignment to a CO Object'

Dear All Experts,
This is regarding error getting while POsting document in tcode FBCJ
Getting error 'Account 302024 requires an assignment to a CO Object'
I have enter data in FBCJ for cash payment and saved it. But while posting tht document it's giving error.
I have enter Cost center also in that entry.
My GL 302024 is 'Insurance claim' of Other income group and defined as Cost element account in FS00.
Cost element category is '1' i.e Primary cost-reducing revenues."
Also checked field status group in FS00. Cost center is an optional field in Field status group.
For your information, i have different Profit center concept with diff. Cost center.
So i cannot assigend one cost center to all Profit center automatically through OKB9.
Pl required your help urgently.
Regards
Swati Shah

Dear,
As you said Insurance claim account is created in Other Income group but actually it should be created in other asset group. May be you have created this account as Balance Sheet account so that system expects profit center to be filled in the document. Cost center is never required in Income and balance sheet account.
And please make sure because lot of ambiguity appears in your problem since this is created in Other Income group and cost element is created with category 01.
Try entering profit center.
Regards,
Chintan Joshi.

MR11 clearing - GL accounts requires an assignment to co object

Hi Experts,
While executing MR11 clearing, system is throwing error account xxxxxxxx requiring an assignment to CO object. We have done GR as well IR for which cost object is correctly picked as in purchase order. But while doing MR11 it is throwing error. What configuration needs to be checked to over come this error.
Thanks in advance
Narayanan

Hi,
Go to FS00 choose your That g/l account click on change mode and click on Edit cost element (F8) and click on Default Acct Assgnmt Tab give me a cost center and save
Thanks,
Raviteja

Accounting 12546 requires an assignment to a CO Object

Hello Gurus
I am getting the error Accounting 12546 requires an assignment to a CO Object Please ignore the number it is my G/L number for which primary cost element is also the same.
I happens when i do transfer posting in MB1B movement stock from one material to other material
the reason for this error is the price in material master is different for two material so because of this PRD account key is called
i have checked all the options by assignment of cost elements and still it is not solved
This account is used in Account key in MM PRD - price difference automatic account assignment
and the error is raised only one when i post large value say around above 10,000 rs in value
for less qty means value the error is not generated
Any solution for this
( I have checked all the forums message related to this before posting )
Thanks for Advance
Rajesh

Hi Rajesh,
the answer is very simple.
for all automatic postings or automatic account assignments, you need to maintain the default cost object in OKB9.
For that particular GL account you need to main the automatic account assignments in OKB9 settings
Please do let me know if you need further clarifications
Best Regards
Surya

Transfer Posting (MB1B): Account XYZ requires an assignment to a CO object

Hi,
Iam doing a Sales order to Sales order transfer using MB1B (Transfer Posting) and movement type 413 (E). However i get an error "Account 526020 requires an assignment to a CO object".
Can someone advise as to where i need to assign the Costobject.
Please advise.
Thanks,
Safi

Do you really need to post something to a Cost Centre? If its a SO to SO transfer, what kind of cost is posting to the Cost Centre?
I would suggest you analyse the GL Account (why it needs an assignment to a CO Object?) and consider changing the Field Status Group or assigning a GL that is not a Cost Element.
If you really have to assign a Cost Centre, then OKB9 is your best alternative. Enter a Common CCtr that will collect the costs and maybe let you allocate the same later.
Cheers.

MIGO Error - Account 6500029 requires assignment with CO object

Similar Messages

Maybe you are looking for