MIGO ERROR - record 0 in attribute mt_vbap_com does not exist
Hi
i hit an error while performing MIGO under cancellation of order (Mov 262)
the message is ;-
"Record 0 in attribute mt_vbap_com does not exist".
do anyone know this problem ?
can you obtain and post the message number of this message?
Similar Messages
-
Valuation record 600025 UP01 LOCAL does not exist
Dear Friends,
I have configured split valuation for materials.
1. i activated split valuation in OMW0
2. I created the following in OMWC
2.1 global types IMPORT for 0003 spareparts
2.2 global types LOCAL for 0003 spareparts
2.3 global category P Batch
for this category, above 2 types activated.
for this category, above 2 types are assigned to my Org. Unit plant UP01.
now i created a material 600025 and in accounting1 view, i have taken the following
valuation category - P
price control - V
moving price - 1,00
next i created a PO in ME21N for vendor 400015.
while MIGO against this PO,
after clicking Check the below error is coming.
Valuation record 600025 UP01 LOCAL does not exist
Message no. M7077
how to fix this. please help me.
Thanks in advance
Ravi.Hi,
create val types for your material in MM01,.
Goto MM01 and select accounting view and give your org level plant and in the pop up window enter P val type and in acc view give details for your different val types.
Regards,
Deepak.
Edited by: deepak k b on Dec 11, 2008 8:17 AM -
FTXP-error-Domain MWART fixed value does not exist- Message no. F4341
Hi,
I am trying to created a new record for a tax code, and i get this error
Domain MWART fixed value does not exist
Message no. F4341
I looked up OB40, and not sure how to fix this. Do you know how to check the tax codes? How to validate OB40?
Thanks.Hello,
Please follow this procedure for the input tax codes which experience
the error F4341:
1) Go to SE16 and enter table T007A
2) Hit enter and in the next screen choose the following parameters
and enter values that represent the tax code for input tax which are
encountering the problem.
KALSM (tax procedure)
MWSKZ (tax code)
3) Click on the "execute" button.
4) Take special attention to column MWART which represents tax type.
This should only have a value "V" to represent input tax (or "A" if
output tax).
5) The cause of the error F4 341 is when this column does not contain
any value or is blank. Which means that there is no defined tax type
"A" or "V" maintained in customizing.
6) To correct this you should maintain the value again via FTXP for the
corresponding tax codes and complete all the customizing settings
relating to tax on sales and purchases thereunder. Afterwhich you
should no longer experience the error message.
Regards,
REnan -
Message no. M7077: Valuation record MMMM PPPP 02 does not exist
Hello experts ,
I am getting the erroer Valuation record MMMM PPPP 02 does not exist : Message no. M7077. while doing MIGO - GR .
Pls tell me what could be wrong in Materiual master ??
Regards
AnisHi
It seems that you are mainataining a valuation type in the GR, where as the material is not maintained with that valuation type.
In the GR Press F4 on the field "Batch" to obtain a list of the valuation records for the material.
If you would like to maintain the valuation type for the material , Please maintain the same using MM01 transaction by just extending the Accounting view with that valuation type.
Thanks & Regards
Kishore -
Hi,
I am installing NW7.4, usage PI, and during the "define parameters" phase, while checking connection to the database, I get the following pop up error:
Caught ::EKdException in module call: The attribute <SAPNotes> does not exist..
I checked sapinst log for more meaningful entries and found the following:
ERROR 2014-03-19 15:33:32.656
FKD-00024 Unknown attribute SAPNotes in table tMSS_ServerParameters.
Any ideas? OS is Windows 7, and DB is MSSQL 2012 (installed using SAP vb script provided) - pre-requisites checks were executed and I got OK's all around, including for the Windows 7 OS.
Thanks,
MarcoHello, same thing with system installtion NW 7.30 OS=2008R2 DB=SQLSERVER200R2
see trace..
TRACE 2014-03-25 11:17:47.819
Copying SQL scripts from X:\nw730_installation\swpm\COMMON\INSTALL\MSS\SQL to target...
ERROR 2014-03-25 11:17:47.893 [kdxxcrow.hpp:112]
lib=iakdblib
FKD-00024 Unknown attribute SAPNotes in table tMSS_ServerParameters.
TRACE 2014-03-25 11:17:47.898 [jsextension.hpp:141]
JSExceptionHandler::setJSException()
Member function 'Installer.setKdbClient()' has thrown ::EKdException. Converting to JavaScript exception EJS::EKdException.
TRACE 2014-03-25 11:17:47.898
Function setMessageIdOfExceptionMessage: modlib.jslib.caughtException but already set to modlib.jslib.caughtException
TRACE 2014-03-25 11:17:47.941 [iaxxgenimp.cpp:649]
CGuiEngineImp::showMessageBox
Caught ::EKdException in module call: The attribute <SAPNotes> does not exist..
...end of trace
with SWPM=SWPM10SP04_8-20009707.SAR
it works finde.
Winfried -
Error 1070023 Configured Disk volume does not exist.
Hi
I installed Essbase 11.1.1.2 in stand alone mode. When I am trying to start Sample.Basic, I am getting the below error
Error 1002097 Unable to load database Basic.
The App log showed the following error
Error 1070023 Configured Disk volume does not exist.
Please help..So everything works when the volume is set to E?
If so, you might be able to use DISKVOLUMES E in the essbase.cfg file which sets a default (for BSO cubes, at least), but you shouldn't have to do that.
The DISKVOLUMES documentation says that the volume that contains your ARBORPATH is the one used by default. Not completely sure I trust that it's up to date, and isn't now ESSBASEPATH or something else, but regardless, do those variable all look to be set correctly? To be honest, that's a longshot, as I'd be surprised if a missing / incorrect value there wouldn't cause bigger problems... -
Error 1075: The dependency service does not exist or has been marked for deletion
Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support -
Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before. -
Hi to all,
I tried to compile my .sln with VS2010 but I had this error.
error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project.
It occurs only compiling with win32 configuration but not with x64 one.
Ideas?
Thank you in advancedIn which version of Visual Studio did you create this solution? And What type of the project in this solution? And could you please post the proj file here?
If this solution is created in VS2012 or VS2013, please make sure the original solution is not corrupt, it can be opened and built successfully in the corresponding Visual Studio. For probable compatibility issues, you could check the documents here:
Visual Studio 2012 Compatibility
Visual Studio 2013 Compatibility
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
The phone company was here working on something while I was gone. They sat down at my computer (iMac) and since then HDR toning doesn't work. Get the code: Error 48: File or folder does not exist. Line: 11 -> $.evalFile(g_StacScriptFolderPatch + "StackSupport.jsx"); How can this be fixed?
Go to //Applications/Adobe Photoshop [Version]/Presets/ Scripts/Stack Scripts Only/ and see if StackSupport.jsx is there. If it is not, uninstall and reinstall Photoshop to have it added back in. If it is there, first try recreating the Photoshop Preferences (hold down Command+Option+Shift while launching Photoshop).
-
HDR Toning Error 48: File or Folder Does Not Exist
After migrating to a new computer HDR Toning is no longer available.
I get a pop-up: Error 48: File or Folder Does Not Exist
Line 11 -> $. evalFile(g_StackScriptFolderPath + "StackSupport.jsx");
What's the fix for this, if anyone knows?
Thanks.Go to //Applications/Adobe Photoshop [Version]/Presets/ Scripts/Stack Scripts Only/ and see if StackSupport.jsx is there. If it is not, uninstall and reinstall Photoshop to have it added back in. If it is there, first try recreating the Photoshop Preferences (hold down Command+Option+Shift while launching Photoshop).
-
Ruler Tool- Error 48: File or folder does not exist
I am trying to use the new RULER TOOL in CS5 (64-bit mode) running 10.6.4 and I get the following error:
Error 48: File or folder does not exist.
Line: 31
-> $.evalFile( g_StackScriptFolderPath + "Geometry.jsx");
Any ideas?i'm getting the exact error using Windows XP with CS5.5
error 48: file or folder does not exist
line: 31
-> $.evalFile(g_StackScriptFolderPath + "Geometry.jsx");
HELP!!!
someone
hello ... anyone out there?
how do we get support for this error?
e -
Error message FI 759: Fund does not exist in FM area
Hill!
I have to make a distribution in CO-OM (tr KSV5) according to fund
But if I customize fund as sender, choose fund from the fund catalog and make a formal chek of cycle I see an error message FI 759: Fund does not exist in FM area. How can I make it go away?Hi Irina,
As per the note 489315, you must choose a layout that contains the exact data for the active objects.
When planning for non-FM company codes you will have to change the profile/layout that only contain the elements that are active in the company code.
If you encounter error: KAFF002 while doing the above then please can you see if point 3 of note 555134 will help to by-pass the message.
Once you add the field Fund and set it to optional you should be able to use planning.
Note 555134:
3. The fields of the Funds Management are defined as 'Required entry
fields' in the standard layouts, in other words depending on the
permissibility of the initial value for a field an entry is always
demanded. To prevent this there are two options:
a) Copy the desired standard layout into an own (transaction KP65,
KPG5, OPO1) and via "Extras -> Variables -> Variables definition'
set the corresponding field to 'Optional". Then, add this layout
to your planner profile with transaction KP34.
b) Implement the attached program ZK555134 (correction instruction
461025). After the entry of planning area and layout all fields
of the Funds Management are set depending on your selection of
'Optional' or 'Not optional' (standard system). Like this you can
also change standard layouts. The check for the fields for which
'initial' is not a valid value is still carried out.
If you want to use FUND Accounting, I suggest you to read note 518610 for your reference. This note contains information about FUND Accounting and its effect.
If you only want to use 'Fund' in Funds Management, you do not have to activate the 'Fund' account assignment element.
If you activated the FUND account assignment element, which is at CLIENT level activation, the fund would always have to be filled as a required entry field in CO, FI-AA and HR for all company codes in the client concern.
Please also refer to notes 625262 and 659086.
or re-import the standard planning layout from the client 000. In the note 320197 is descriped how to do this.
I believe this will resolve your issue.
Best Regards,
Vanessa. -
Error(27,78): Reference PartnerLink1 does not exist as wire target
I am starter to BPEL.. when i am trying to invoke webservice(http://www.webservicex.net/convertMe...ight.asmx?WSDL) i am getting these errors
Error(27,78): Reference PartnerLink1 does not exist as wire target
Error(90): Element 'targets' not expected.
Edited by: 974508 on Dec 2, 2012 8:09 PMmaybe you first created the partnerlink in the bpel instead of the composite?
create the reference in the composite, see if you get the wire from the bpel to your convert-service and then go to the bpel process and use the invoke to call the partnerlink
if you did all this (recreating the service in the composite would maybe be the easy fix) -
Build error :package com.sun.javadoc does not exist
Question from a Turing machine expert who is new to Java.
Trying to run a sample program from Richardson's book "Java JDK 5 Edition" Chapter 1.
In Netbeans 5.5 receive build error :package com.sun.javadoc does not exist
for "import com.sun.javadoc.*;"
Believe missing classes are in tools.jar in C:\Sun\SDKee5SDK\jdk\lib
How do I define this to Netbeans and/or JDK?
Using java_ee_sdk-5_01
and netbeans-5_5-windows downloads.
Platform is XP.
Netbeans has been updated to date.
Appreciate.sony_tj wrote:
D:\Xyz.java:22: package com.sun.javadoc does not exist
import com.sun.javadoc.*;After getting this error, I have set my classpath to C:\Program Files\Java\jdk1.5.0_03\lib\tools.jar. But still the error persists. Could anyone please tell me how do I solve this problem.You have failed in setting your classpath in that case.
Maybe you are looking for
-
Ipad 2 & ios7 issue with HDMI adapter
I have problem with connecting ipad2 to TV using HDMI adapter (genuine apple) after upgrading to ios 7.0 TV shows static or blinking black screen Worked perfect with 6.1.3. Pls advice.
-
How do I get the info on ITUNES to my iphone?
I have recently downloaded stuff off of itunes. Now how do you get it to your phone?
-
Performance Manager Console Extension (WL PMCE) not work ?
Hi I'm using WL 8.1 Platform Edition SP4. After install the WL PMCE and point the browser to the console at port 7001 ( or SSL 9002 ) I see the normal applet options but not the new extension options. The error shows in the log is : <22/02/2005 11:40
-
Why is keyboard is slow on my macbook pro, why is keyboard is slow on my macbook pro
why is keyboard is slow when typing
-
Cortana does not seems to work
Click on the Search... As I speak through the microphone, Cortana didn't work at all.