MIGO error: Unable to Good return - error msg: M7328
Hi all,
when i try to do a reverse mvt 122 on MIGO, a system error M7328 - deflicit of Delivered Qty appeared. I do not understand why coz this is a Direct delivery Purchase Order. This order is a full delivery order, no partial no return. Just 1 delivery.
Any idea what might cause it. Any table or program we can use to change the GR qty?
Thanks,
Rebella
HI Rebella,
Defict means "not enough"
let me give you a example. You have raised a PO for 100 Qty and then ou have recieved 100 Qty, so your stock is 100 now and then you have issues 25 Qty to production and now you are left out with 75 Qty in stores.
Now you are trying to return 100 Qty when 75 Qty is only there, that is the reason it is showing you this message.
Please check stock of the material which you are return first in MMBE and then follow the return process.
Thanks & Regards,
Kiran
Similar Messages
-
Error compiling FPGA VI: ERROR:Xflow - Program xst returned error code 6.
When I use the Linear Interpolation function in my FPGA VI i get the compilation error:
ERROR:Xflow - Program xst returned error code 6. Aborting flow execution...
the Compile Server also gives the more detailed information:
ERROR:Xst:1749 - "C:/NIFPGA85/srvrTmp/LOCALH~1/TRAPCO~2/NiLvFxpFloor.vhd" line 68: error: The output for the floor function should not have any fractional bits.
I'll be happy for any suggestions how to solve this.Hello!
Could you compile a program with only the Linear Interpolation.vi and only some constants and indicator as input and output?
I tried on my PC and compile a simple VI containing only the Linear Interpolation.vi
Which Version of NI-RIO do you use?
Do you also placed the FPGA VI in library? If yes put out all FPGA VIs from the library and check that they aren't reentrant.
This could cause problems to the compiling of FPGA VI.
Try to create a new project with only a VI with the linear interpolation and check if it is compiled.
Best regards
Ken -
How come my computer gives me an error "Unable to sync Unknown error"
When I sync my IPOD Touch to my computer it gives me an error "Unable to sync, Unknown Error". I already updated my IPOD and it did not fix the problem. Anybody have any ideas?
I forgot to add it was error 1319. Thx
-
Goods return Error and handling rejections
We're trying to develop a process to handle the repair of one of our
converters, but we need to return a component of the returned
converter into inventory so that it can be rejected and sent back to
the vendor for repair using our Quality Material procedure.
We decided to try the ByProduct functionality. On the production order
that we are performing our repairs on, we manually added a component
for the transformer we need to return to our vendor with a qty of -1.
We then try doing a MIGO with a movement type of 531 to bring the
transformer into inventory so that it can be rejected and returned for
repair. When we try to post the migo we get the error stating " Account XXxx4xx must be posted as group account ZZxxxxxx with trading partner"..Hi Raj,
U can make GR for By product with MVT type 531 at MIGO for Order.
And one more way, is set the backflush indicator & stoarge loaction for By product component at "component over view" of the Prod order & confirm the order, sytem will make GR posting for By product.
Please let us know "Error message Number" for the Error which u are getting at MIGO.
Regards
Pradeep -
Hi all,
I have created a GRPO the journal Entry was right
entry is Raw material Dr 25000
GR/IR 25000
and Immediately I have done goods return.
But when I see the journal entry in Goods Return, Price difference account got effected..
the entry for Goods return is
Ra material Dr - -10000
Price Difference Dr - -15000
To GR/IR 25000
I dont understand why my price difference account got effected?
Regards
Shashisorry wrong post
-
Deployment to the client is successful but the error reported within Clients "SCCM Software Center"
The software change returned error code 0x87D00324(-2016410844).
Also States on "Status" Past Due - Will be Retired"
Can't figure this one out and I did some googling with no success in finding a solution?
I am running an Adobe Flash install (.EXE)
Any help or direction would be greatly appreciated
RFHi,
Thank you for your response
""Wow6432Node is not valid on x86 systems."""
Yes, that I am aware of that.....Windows on Windows, for running x86 apps on x64 Windows<o:p></o:p>
When I first created the detection method I had only created the "WoW" Check
for Flash value in the reg, which was running against both x86 & x64 Win 7
systems, and forgot to include the x64 check/, either case, the error appeared
on the WOW check. Presently I have 2 "Detection Clauses" one for x86
and the second clause is x64 ( non WOW Path), and still receive the same erorrs
on both x86 & x64 systems. ( and x64 system have both reg entries since Win 7 has both x86 & x64 versions of IE)
Looking at the registry of an x64 Win 7 system I find the Adobe Flash registry entry is
located in both Wow6432Node and also in the x64 sections of the reg.....<o:p></o:p>
""""Also, why use the default value? I doubt there's anything in there (the default value is the
value display in a key in regedit with the name of
"@").""""<o:p></o:p>
When Default Value is selected the boxes/options below that allow for more detailed
information to be entered when performing the "reg check"? This is
where I had been able to enter specific Build/Version to look for, Flash
11.4.402.265, so that if it does not discover the build # it will proceed with
the install.....<o:p></o:p>
I figured having the option to check for Build/Version # would omit SCCM reinstalling on
systems that have build 11.4.402.265 already?<o:p></o:p>
From what I understand is that Adobe Flash x64 installs both versions x86 & x64 since Win 7 has both IE
x86 & IE x64 bit versions by default, and this would explain the Wow6432Node reg
entries and the true x64 reg entries in both locations when installing.
Overall, I am thinking I may be heading in the wrong direction in resolving this, as x86 & x64 versions install on the systems, so this tells me it is detecting when / what needs to be installed, the issue seems to be how it reports back after installing......
Looking further, I view the Content Status Page, and there reporting info in Asset Detail under [Success] all others { / In Progresss / Error /Unknown } has no info......
If this helps provide further details.....
Thanks
Regards,
Ron
RF -
L_TO_CREATE_TR displays the error message instead of returning !!
Hi All,
The FM L_TO_CREATE_TR is displaying error message instead of returning error/raising exception, as a result the program terminates there, and we are not able to capture the error, and process other items in the loop.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
The above code in line 142 of Include - LL03BF1A, displays the message as Error, if message type is E. Whenever we try to change the SY-MSGTY to I in debug mode, the control again comes to the same point, with same ERROR message, infinitely!!
An example error message is 'Available quantity in bin is zero'.
Please provide a solution for the above issue.
Thanks,
PrabhakarHi All,
We have solved the issue, by adding an exception ERROR_MESSAGE before OTHERS, while calling the std. FM L_TO_CREATE_TR.
For the MESSAGE statement(for msg type E & A) without RAISING clause, the FM will be forced to raise the exception ERROR_MESSAGE. The details of the message can be read from the system parameters(SY).
Ref: http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98ef35c111d1829f0000e829fbfe/content.htm
Thanks,
Prabhakar -
Error Unable to fetch authentication_scheme (XE specific?)
Was a bit disappointed to discover in ApEx on XE I can not define multiple oracle accounts and just swap these in the Edit Application Attributes/Parsing schema recently like I can on the non XE database, but never mind, I just create a new database account, build the database objects and then import an app export from the old schema - right?
Wrong: I get the Error Unable to fetch authentication_scheme error and the parsing schema is correct. This is on an XP machine with version 2 of ApEx.
I used the export and it went into the Oracle hosted site without any issues.
PhilScott
Hope this helps. Much thanks in advance,
Phil
--=--=--
SQL*Plus: Release 10.2.0.1.0 - Beta on Wed May 17 21:24:54 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Beta
SQL> set numformat 999999999999999999999999999
SQL> ---------- # 1 App ID 103
SQL> select security_group_id,owner, authentication,
2 custom_authentication_process from flows_020100.wwv_flows
3 where id=103
4 /
SECURITY_GROUP_ID OWNER
AUTHENTICATION
CUSTOM_AUTHENTICATION_PROCESS
698507975747714 HR
CUSTOM2
.1580108075227870.
SQL>
SQL> select id,name,security_group_id from
2 flows_020100.wwv_flow_custom_auth_setups where flow_id=103
3 /
ID
NAME
SECURITY_GROUP_ID
1580108075227870
HTML DB
698507975747714
1580219849227870
DATABASE
698507975747714
ID
NAME
SECURITY_GROUP_ID
SQL>
SQL> select short_name,provisioning_company_id from flows_020100.wwv_flow_companies;
SHORT_NAME
PROVISIONING_COMPANY_ID
Unknown
0
INTERNAL
10
SYSTEM
696210144731575
SHORT_NAME
PROVISIONING_COMPANY_ID
HR
698507975747714
DEMO
708308154793215
M2
1640709924346523
SHORT_NAME
PROVISIONING_COMPANY_ID
SAFEX
1655628274476335
7 rows selected.
SQL>
SQL>
SQL> ---------- # 2 App ID 106
SQL>
SQL> select security_group_id,owner, authentication, custom_authentication_process
2 from flows_020100.wwv_flows where id=106
3 /
SECURITY_GROUP_ID OWNER
AUTHENTICATION
CUSTOM_AUTHENTICATION_PROCESS
1655628274476335 SAFEX
CUSTOM2
.3266419425866274.
SQL>
SQL>
SQL> select id,name,security_group_id from flows_020100.wwv_flow_custom_auth_setups
2 where flow_id=106
3 /
no rows selected
SQL>
SQL>
SQL> select short_name,provisioning_company_id from flows_020100.wwv_flow_companies;
SHORT_NAME
PROVISIONING_COMPANY_ID
Unknown
0
INTERNAL
10
SYSTEM
696210144731575
SHORT_NAME
PROVISIONING_COMPANY_ID
HR
698507975747714
DEMO
708308154793215
M2
1640709924346523
SHORT_NAME
PROVISIONING_COMPANY_ID
SAFEX
1655628274476335
7 rows selected.
SQL> -
Fpga -Re:ERROR MESSAGE INDICATIN X-FLOW PROGRAM MAP RETURNED ERROR CODE
sir,
I am working on a project using ni rio-7831R uaing labview fpga1.1, on compiling on to the device i am encountering a error giving follow message:
Problem encountered during the packing phase.
ERROR:Xflow - Program map returned error code 2. Aborting flow execution...
so please, recommend me the action so that i could compile my project without error.
vamsiHi Vamsi,
The information you are looking for is in this KB: Why Does My FPGA Compile Give An OVERMAPPED Error When Compiling? < http://digital.ni.com/public.nsf/websearch/060BA89FE3A0119E48256E850048FFFE?OpenDocument >
I think you are running out of space on your FPGA. You can either purchase a 3 million gate fpga(7833R) or Optimize your code to use less space. Have a great day!
Regards,
Prashanth -
Disk Utility - "Unable to create 'Desktop' - error 49168" - What's this?
I try to create a compressed disk image of my Desktop using Disk Utility and get the following error:
Unable to create "Desktop" - error 49168
Does anyone know what that means?Googling for the term
"error 49168"
including the quotation marks points to several web sites, including http://forums.macosxhints.com/archive/index.php/t-45310.html
which you may find helpful. -
Hello everybody,
I have a huge database over windows 2003 server and sql server 2008 r2, all of them with all update, no firewall, no antivirus, no any server feature/role installed.
Over the last 2 months I suddently start getting the following error:
The operating system returned error 21(failed to retrieve text for this error. Reason: 15105) to SQL Server during a read at offset 0x000000000da000 in file 'S:\TempDB\tempdb.mdf'. Additional
messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB).
This error can be caused by many factors; for more information, see SQL Server Books Online.
I have the TEMP database split over 5 partitions on 5 different SAN disk. beggining size of each partition fix to 20 GB with autogrow 10%. Single Instance, around 15 DB.
The space on each hard disk does not reach 60%.
I got the above error when all temp files reach 27 GB approx.
I already ran a check disk, checkDB and everything says no error found, but I still got same error.
Does anyone know what could cause something like this?
note, when getting the above error, the only way to fix it, because I cannot do any select on any DB is to restart the service, so each temp file start again at 20 GB and everythign seems to be fine until reach the size again.
Gilberto H.The operating system returned error 21(failed to retrieve text for this error. Reason: 15105
Hello Gilberto,
See System Error Codes (0-499) for error code 21:
ERROR_NOT_READY
21 (0x15)
The device is not ready.
Could be an issue with your storage system
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Explain Error? Device returned error '3'
Hello, received an email from one of the OnPlus units we have stating this:
Cisco OnPlus Event: Error
Backup aborted - Device returned error '3'
Can someone explain the cause and possibly how to correct this?
Thank you, PaulHi Paul,
What device was this for? Was it an ESW?
Please reboot the ESW and then backups should be able to complete. This a known issue for ESWs and OnPlus.
Thanks,
The OnPlus Team -
The software change returned error code 0x87D00607(-2016410105).
Hi to everyone. I am learning SCCM 2012 R2 using book Mastering SCCM 2012 R2 in addition to various video trainings and online resources. Currently I am focused on application deployment. I created Foxit Reader application - msi deployment type, distributed
it to DP and deployed it to device collection containing only one test computer (Win 7 Pro SP1 x64). Having done all these steps I went to client's Software Center and Application Catalog. Foxit Reader app is visible but as soon as I click on Install
button I receive an error:
The software change returned error code 0x87D00607(-2016410105).
I deployed Office 2013 a few days ago (although I am struggling to uninstall it silently) without problems. Meanwhile I did not change anything related to boundaries, boundary groups and DPs. I have only one SCCM 2012 R2 server (Primary stand-alone site).
I hate these situations when I follow along some official learning material such as this book, doing everything the same as it is done there and it does not work at all.
Unfortunately I can not afford official MS training, my company does not invest in their system engineers so we are on our own. It is nice to learn something by yourself but situations like this take too much time - probably on official training it would be
solved immediately.Its likely that your problem is being caused by incorrectly configured boundaries with Configuration Manager. There are quite a few blogs on this particular error, as an example:
http://www.vmadmin.co.uk/microsoft/64-mssystemcenter/350-sccm2012errorboundary87d00607
and
http://peerk.blogspot.com.au/2013/01/sccm-2012-app-stuck-at-downloading-0.html
or
http://heineborn.com/tech/application-installation-error-0x87d00607/
Take a look at your boundaries and make sure that you have one configured relative to the location of the Distribution Point that the client is trying to download content from.
Cheers
Damon -
The software change returned error code 0x87D0128F (-2016406897)
Hi all,
We are currently using Admin Studio 2013 to create App-V applications (which in turn uses the Microsoft App-V 5.0 Sequencer running through AAC). I have noticed that the last few applications that have been sequenced, when deployed via SCCM 2012 have
the following error:
The software change returned error code 0x87D0128F (-2016406897)
Now, we have tested these applications on a vanilla Windows 7 SP1 OS using the AppVLauncher and the application launches as expected. The issue seems to be with the app deployment. I have read a couple of articles about this (slim picking) and
one suggested the shortcut could have an extra space at the start. This is not the case for my apps. Also the other suggestion is changing the Enable Scripting registry key, but again this did not work.
Has anyone else seen this problem and have a solution?
TaThanks for replying Torsten,
This is the error log I get. Not quite sure how to diagnose the issue:
+ CategoryInfo : InvalidResult: (:) [Add-AppvClientPackage], Clie
ntException
+ FullyQualifiedErrorId : ConfigurePackageError,Microsoft.AppV.AppvClientP
owerShell.AddAppvPackage
]LOG]!><time="16:16:49.418+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appexcnlib.cpp:441">
<![LOG[AppV command ["C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Add-AppvClientPackage -Path 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01.appv'
-DynamicDeploymentConfiguration 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01_UserConfig.xml'] failed with return code 1.]LOG]!><time="16:16:49.419+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appvcommandutil.cpp:128">
<![LOG[AppVCommandUtil::RunAppVCommand() failed. (0x87d0128f)]LOG]!><time="16:16:49.420+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appvcommandutil.cpp:154">
<![LOG[AppVManageClient5X::InstallAppVPackage() failed. (0x87d0128f)]LOG]!><time="16:16:49.421+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appvmanage5x.cpp:86">
<![LOG[ CAppV5XHandler::InstallApp() failed. (0x87d0128f)]LOG]!><time="16:16:49.422+00" date="11-19-2013" component="AppEnforce" context="" type="3" thread="2532" file="appv5xhandler.cpp:646">
<![LOG[++++++ App enforcement completed (5 seconds) for App DT "00031_SolidWorks_eDrawings_2014_EN_R01" [ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e], Revision: 1, User SID: ] ++++++]LOG]!><time="16:16:49.427+00"
date="11-19-2013" component="AppEnforce" context="" type="1" thread="2532" file="appprovider.cpp:2366">
<![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="17:10:13.543+00" date="11-19-2013" component="AppEnforce" context="" type="1" thread="4828" file="appvpackagequery5x.cpp:177">
<![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="10:46:36.192+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvpackagequery5x.cpp:177">
<![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="10:46:36.259+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvpackagequery5x.cpp:177">
<![LOG[+++ Starting Install enforcement for App DT "00031_SolidWorks_eDrawings_2014_EN_R01" ApplicationDeliveryType - ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e, Revision - 1, ContentPath - C:\WINDOWS\ccmcache\y,
Execution Context - Any]LOG]!><time="10:46:37.834+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appprovider.cpp:1643">
<![LOG[ A user is logged on to the system.]LOG]!><time="10:46:37.916+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appprovider.cpp:2014">
<![LOG[ Performing detection of app deployment type 00031_SolidWorks_eDrawings_2014_EN_R01(ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e, revision 1) for system.]LOG]!><time="10:46:37.927+00"
date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appprovider.cpp:2079">
<![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="10:46:38.236+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2280" file="appvpackagequery5x.cpp:177">
<![LOG[ Installing App-V 5.X package 00031_SolidWorks_eDrawings_2014_EN_R01 (DTId = ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e, Revision = 1)]LOG]!><time="10:46:38.245+00" date="11-20-2013"
component="AppEnforce" context="" type="1" thread="2500" file="appv5xhandler.cpp:422">
<![LOG[Running App-V command ["C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Get-AppVPublishingServer | Remove-AppVPublishingServer
] for the machine]LOG]!><time="10:46:38.246+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvcommandutil.cpp:117">
<![LOG[ Executing Command line: "C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Get-AppVPublishingServer
| Remove-AppVPublishingServer with system context]LOG]!><time="10:46:38.247+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appexcnlib.cpp:345">
<![LOG[ Process 4356 terminated with exitcode: 0]LOG]!><time="10:46:43.218+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appexcnlib.cpp:431">
<![LOG[The AppV 5X client is configured for use with ConfigMgr.]LOG]!><time="10:46:43.219+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvclientconfig5x.cpp:64">
<![LOG[The package with GUID {E6F08B0C-F196-450C-A615-7731F4DAFA47} is not installed on this machine yet]LOG]!><time="10:46:43.245+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appvpackagequery5x.cpp:177">
<![LOG[Package: 00031_SolidWorks_eDrawings_2014_EN_R01 with version GUID {7013821C-844B-46E4-B3DB-380B65BF93CF} is not installed. Will install it]LOG]!><time="10:46:43.246+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500"
file="appv5xhandler.cpp:459">
<![LOG[Configure the package 00031_SolidWorks_eDrawings_2014_EN_R01 as download and execute]LOG]!><time="10:46:43.249+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appv5xhandler.cpp:468">
<![LOG[Running App-V command ["C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Add-AppvClientPackage -Path
'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01.appv' -DynamicDeploymentConfiguration 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01_UserConfig.xml'] for the machine]LOG]!><time="10:46:43.255+00" date="11-20-2013"
component="AppEnforce" context="" type="1" thread="2500" file="appvcommandutil.cpp:117">
<![LOG[ Executing Command line: "C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Add-AppvClientPackage
-Path 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01.appv' -DynamicDeploymentConfiguration 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01_UserConfig.xml' with system context]LOG]!><time="10:46:43.256+00" date="11-20-2013"
component="AppEnforce" context="" type="1" thread="2500" file="appexcnlib.cpp:345">
<![LOG[ Process 4120 terminated with exitcode: 1]LOG]!><time="10:46:45.438+00" date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appexcnlib.cpp:431">
<![LOG[Here is the error message generated by the process:
Add-AppvClientPackage : XML document could not be loaded because it is
invalid. Please supply a valid XML document. Please consult AppV Client Event
Log for more details.
Operation attempted: Configure AppV Package.
AppV Error Code: 050009000A.
Please consult AppV Client Event Log for more details.
At line:1 char:106
+ import-module 'C:\Program Files\Microsoft Application
Virtualization\Client\Appv ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
+ CategoryInfo : InvalidResult: (:) [Add-AppvClientPackage], Clie
ntException
+ FullyQualifiedErrorId : ConfigurePackageError,Microsoft.AppV.AppvClientP
owerShell.AddAppvPackage
]LOG]!><time="10:46:45.442+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appexcnlib.cpp:441">
<![LOG[AppV command ["C:\\windows\\System32\\WindowsPowerShell\\v1.0\\powershell.exe" -ExecutionPolicy Bypass import-module 'C:\Program Files\Microsoft Application Virtualization\Client\AppvClient\AppvClient.psd1'; Add-AppvClientPackage -Path 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01.appv'
-DynamicDeploymentConfiguration 'C:\WINDOWS\ccmcache\y\00031_SolidWorks_eDrawings_2014_EN_R01_UserConfig.xml'] failed with return code 1.]LOG]!><time="10:46:45.443+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appvcommandutil.cpp:128">
<![LOG[AppVCommandUtil::RunAppVCommand() failed. (0x87d0128f)]LOG]!><time="10:46:45.444+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appvcommandutil.cpp:154">
<![LOG[AppVManageClient5X::InstallAppVPackage() failed. (0x87d0128f)]LOG]!><time="10:46:45.445+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appvmanage5x.cpp:86">
<![LOG[ CAppV5XHandler::InstallApp() failed. (0x87d0128f)]LOG]!><time="10:46:45.446+00" date="11-20-2013" component="AppEnforce" context="" type="3" thread="2500" file="appv5xhandler.cpp:646">
<![LOG[++++++ App enforcement completed (7 seconds) for App DT "00031_SolidWorks_eDrawings_2014_EN_R01" [ScopeId_42683436-a79d-4a9e-8d2c-695680507cab/DeploymentType_f1b9b8e8-8d73-4138-909e-5e18af698a2e], Revision: 1, User SID: ] ++++++]LOG]!><time="10:46:45.450+00"
date="11-20-2013" component="AppEnforce" context="" type="1" thread="2500" file="appprovider.cpp:2366">
Just to add to this I have also managed to install the application from the downloaded content from SCCM. By that I mean I go into the cached folder and run the app-v launcher, load and install the application and it works correctly. Therefore
it must be something to do with the launch command through SCCM? -
Goods Return from GRPO to backdate with error.
Dear all,
I've got a problem from copying Goods Return from GRPO to the backdate, for example, GRPO Posting Date is '2011-12-11' and Return Posting Date is '2011-11-11', the system threw the below error:
Reconciliation date must be on or after the last posting date for transactions selected for reconciliation [Message 3821-3]
I am using B1 8.82 PL00, the error never come before in older versions of B1.
Please help me,
Many thanks,
DoanHi Doan,
Thanks for your answer.
You're right, I can backdate the DocDate, but what matters is the posting date because of VAT reports.
This way, the VAT is due on a previous date, and now it cannot be issued correctly and VAT reports are all wrong.
This never happened before 8.82, why now?...
Regards,
Jorge
Maybe you are looking for
-
Do I need more memory on my iMac (Mid 2011)?
First and for most I want to make sure that I'm addressing the correct problem that's why I am asking a question that appears to be asked by many people on here. I mainly use my imac 27" to produce music (I use Logic and a LOT of plugins and instrume
-
IMPORTANT: No more "backup every time" or endless apple logo crashes!
So after 11 crashes where the iPhone wouldn't come back after bootup, I had enough. I took it to the Apple Store and they replaced it. Since then, it crashed 2 more times. Yet again, had enough, and decided to try some experimenting. Using this metho
-
Aperture incorrectly reading white balance data from RAW file?
I'm having some problems with both Aperture 1.1.2 and 1.5 importing RAW files from a Nikon D70 and a Canon G6. In both cases, Aperture is not reading the "as shot" white balance correctly. With the G6, Aperture is always setting a fixed color tempera
-
Oracle PLSQL Send mail Issue.
Hi All, I used to send some emails using oracle PLSQL code in both 10 g and 11g.But now days mail is getting triggered without any body in both the 10g and 11g versions. Some mails are triggering perfectly.I am unable to sort out the issue, please he
-
How do I go about updating oracle DB table with timestamp from XI using JDBC receiver?