MIGO : Error when copying batch characteristics

Hi,
I've some problem on MIGO Tcode when i want to copy the batch characteristics.
I work with class type 022.
I create a GR from PO. (movement 101). My item line contained sub-items (with BOM). So i would like to copy the batch characteristics in reference of component batch values.
I've implemented the UE "EXIT_SAPMM07M_004".
Case 1 : In this UE, i fill a standard internal table (named VALUES) with the characteristics names and values i want to resume.
and i use the FM 'CLFM_OBJECT_CLASSIFICATION' with the father and the son batch information in UE, i go to MSC3n and all characteristics are copied (even those unwanted). But when i go to MCS2N, i retrieve the expected values.
Case 2 : Only use the internal table, but some characteristics are not maintained.
Case 3 : Only use the FM, but no characteristics are reversed.
Does anyone could help me ?
Thanks in advance
Best regards.

Hi,
Table and field used in additional data table should be related to the object than only it will work, for e.g. MCHA and ERDAT will work if you create a characteristcis and assign it to class type Batch (022/023) because MCHA table has Batch no. as primary key,
this implies for using material specific table e.g. MARA , you should use characteristics with class type 001 (Material class) , try using with table MARC also
Cheers
Dheeraj

Similar Messages

Error when copying update rules!!!

Hello All,
I am trying install 0SD_C03 from business content, however I am getting following error. Cube got installed properly.
Error when copying update rules
Patch levels are
SAP_BW - 0014
BI_CONT - 0005
Please help me in solving this error.
Regards,
PNK

Hi,
The error message show as below. There is no longtext
Error when copying update rules
Message no. RSAU457
But, when I installed FI-AP cubes, update rules are installed without any error. Is there any settings differs from FI to logistics datasources?
Regards,
PNK

FM 10 - Serious Internal Error When Copying/Pasting

We regularly encounter a serious internal error when copying text from one FM doc to another. We also get the error (occasionally) when we run FrameScript. Does anyone know what could cause this? It appears to happen randomly (i.e. it doesn't appear to be tied to one particular .book or .fm file). We use FM 10, Windows 7, 64-bit OS, and have 4GB of RAM installed. Help please!

We have version 10.0.2.419. There is nothing out of the ordinary with the content except that it is typically in track text edits. We cannot reproduce the crash on demand. It seems to happen randomly and to some users more than others.

! Error when copying song from Purchased to IPod play list. How to fix?

! Error when copying song from Purchased to IPod play list. How to fix?

Hi
Try the iPod for windows forum http://discussions.apple.com/forum.jspa?forumID=826
Tony

Help! illustrator error! I did a runtime error when copying

Help! illustrator error! I did a runtime error when copying!
I 'm using cs5

Nobody can tell you anything without proper system info or other technical details like the exact error message.
Mylenium

System error: Error when copying parameter function group CR01

Dear friends
I am getting the above error while doing the Backflushing in REM.
It occurs when backflushed quantity is issued ,and while confirming the
ACTUAL ACTIVITES above error occurs..........
We have upgrade the system from SAP 4.7 to ECC6.0.
It is giving some error in CRM system but we don't have CRM system.......
Message displayed is as below..................
System error: Error when copying parameter function group CR01
     Message no. CR085
Diagnosis
     Internal error.
Procedure
     Repeat the transaction.
     If the error occurs and you have a CRM System connected to your ERP
     System, the document may have been archived in the CRM System.
     If the error occurs again, inform your system administrator. If the
     error cannot be corrected, call the SAP Hotline directly. Describe which
     steps preceeded the error.
Thanks& Regards
Sandeep
Message was edited by:
        Sandeep Bhowmick

Hi Sandeep
Standard R/3 does not allow backflush without any operation. You need to have an operation to do a backflush.Error message CR 085 is issued because there is no operation in the routing of the material backflushed. System should issue an error when no operations are found in routing. Although, error message CR 085 is not correct, more appropriate message RM 824 for this a program correction is requried check note (691161).
Regards
Prasad
Reward if useful

Copying Batch Characteristics Value from Standard SAP Table Field

Dear Experts,
1. While creating a user-defined Batch Characteristics 'CREATED_BY' using ct04, on the Additional Data tab, I filled the following fields as follows: Table Name = MCHA, Field Name =ERNAM.
'CREATED_BY' was then assigned to a batch Class TRIMMED (of class type 022).
TRIMMED was assigned to a batch managed material ADE245DD.
After posting co15 (confirmation of production order) for material ADE245DD, the value in table MCHA & field ERNAM is automatically copied into the Batch Characteristics value field of u2018CREATED_BYu2019 for the generated batch.
2. But I am unable to achieve the same result when I create another Batch Characteristic with similar settings in the Additional Data tab as follows: Table Name = MARC, Field Name = DISPO.
After doing co15, the value stored in table MARC and field DISPO does not get copied into the Batch Characteristics value.
Please what do I need to do in Scenario 2 above to achieve the same result as in Scenario1?
Regards

Hi,
Table and field used in additional data table should be related to the object than only it will work, for e.g. MCHA and ERDAT will work if you create a characteristcis and assign it to class type Batch (022/023) because MCHA table has Batch no. as primary key,
this implies for using material specific table e.g. MARA , you should use characteristics with class type 001 (Material class) , try using with table MARC also
Cheers
Dheeraj

Error when selecting batch during prod order creation

Hi Gurus,
When selecting batch for production orders components, an error prompted 'Invalid batch, does not match the selection criteria in batch determinat.'
After checking, it is because the classification is not maintained. So I need to re-create in MSC2N.
The question is, how/where should I change back the configurations on checking the batch classification during prod ord?
Thank you.

Kumar,
Please let me know how many Component items are there in the BOM? Out of which how many are Phantom assembly?
It looks like when the BOM is copied to the order it is crossing 9999 items.
I would suggest you to use an intermediate order/material to reduce this number.
I think there was an OSS notes for this to extend the number of character length for BOM items numbering (POSNR).
Hope this helps...Reward your points,
Regards,
Prasobh

Error when copying a table

SQL-developer 4 EA2
When copying a table to a name which already exists (as a procedure) SQL-developer replies that the copy- process took place although it didn't.
You do not get the error message ORA-00955 "name already exists"
regards

If the error is on your mac computer, launch Keynote, then click the word "keynote" beside the apple, and select to "provide Keynote feedback"
If on an iOS device, go to www.apple.com/feedback and provide feedback from this web site

Error when copying files using WebDav web folder

When copying a large group of files/folder to a 10gAS portal page we are randomly seeing the error: "An error occurred while copying some or all of the selected files" in Windows Explorer. Clicking "ok" will resume the file copy process.
The only error I see in the Apache log is:
[Mon Aug 2 18:00:06 2004] [error] OraDAV: Apache/OCI Error -9999/0: ORADAV: LOB was closed with active write operation
Any suggestions? I couldn't find anything on metalink, though i have logged an iTAR as well.

My AirPort Extreme card was replaced on my MacBook by Apple. Prior to this, I was getting odd errors like the one outlined above. I do not receive this issue anymore, and I think I can attribute it to the hardware issue with the card.

Error when Copying a GPO

Hi,
When copying a GPO I get this error
[Warning] The security principal [Local Admins] cannot be resolved. The task will continue; however, there might be unresolved security principals in the destination GPO.
This has never occurred before so not sure what has changed. I cannot see the [Local Admins] listed in the delegation etc. So no idea where this is referenced.
Any ideas on how to resolve.
Phil

> [Warning] The security principal [Local Admins] cannot be resolved. The
> task will continue; however, there might be unresolved security
> principals in the destination GPO.
Check "Restricted Groups" and also "Services", "Files" and "Registry" in
computer config - policies - windows settings - security settings.
The GptTmpl.inf file (containing the above settings) contains the string
"Local Admins" as a group name, and this name does not resolve to a SID.
Martin
Mal ein
Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

External Hard drive getting errors when copying files?

When I'm copying files to my hard drive I keep getting errors that the file is in use. It was originally stopping at around the 167.8MB mark everytime when I try copying files over and giving me that error. As this is a 1TB HDD I have no way of backing it up until I get to the US (currently studying in Australia). So just wondering if anyone had ideas.
Things I've done:
- Tried using HDD over Firewire/USB and with other Macs still same errors
- Tried Disk Utility and sometimes it I get no errors with the disk when I do Repair/Verify Disk or I get an error where the disk can't be unmounted
- I get that error of unmounting when I normally unmount them and I have to unplug the HDD for it to be readable again.
- I try copying files from it or to it, and sometimes files copy to my Computer entirely even 2GB ones, but other times it stops at random intervals, and it always stops when copying files to the HDD that never works, usually stops at random times. :\
Any suggestions, help, or programs I can use for HDD repair would be great!
Thanks a lot,
godzillafan8686

Wondering if I could bump this up a bit, still having problems with it.

How to troubleshoot SQL error when copying cube

I was successful in creating Info Package and running it to copy data frin cube 1 to cube2. However, I get an error when
Running the package. My source cube has 1.9 million rows. However, Info Package only loaded 30,120 records. Looking in monitor logs, it shows me following error stack:
System error in program SAPLRS_EXECPTION and from RS_EXEPTION_TO_MESSAGE
SQL Error 0
Unknown error in SQL Interface
Errors in source system
When I click on long text button for Unknown error in SQL interface:
The SQL interface of the application server (DBSL) has reported an unknown error. This error can be caused by:
- Overflows when aggregated data is read from the database in ABAP. If this occurs, the definition for the corresponding key figure must be changed.
- Internal errors
It seems to be some kind of Overflow error. Is there any way to get more information on the cause
Of this erroru2026.
THANKS A LOT.

I tried SM50, it shows me all processes, but I still cannot figure how to set developer trace. Following is detailed information on what I am doing in copy of cubes and errors I am getting:
Subject: Troubleshoot Copy of Cubes
I have tried to copy several cubes on my BI 7.0 and all of them same error, so I am wondering whether I am doing something fundamentally wrong.
                System error in program SAPLRS_EXECPTION and from RS_EXEPTION_TO_MESSAGE
                SQL Error 0
                Unknown error in SQL Interface
                Errors in source system
After error occurs I get following message in mail:
          The error occurred in Extractor.
           Refer to the error message.
                 Procedure
             How you remove the error depends on the error message.
                 Note
          If the source system is a Client Workstation, then it            is possible that the file that you wanted to load was being edited
at the time of the data request. Make sure that the file is in
the specified directory, that it is not being processed at the
I looked in SM21, system logs, whenever error occurs, I see the u201C
Database selection with invalid cursor &5&5
The database interface was called by a cursor (in a FETCH or CLOSE cursor operation) that is not flagged as opened. This can occur if a COMMIT or ROLLBACK was executed within a SELECT loop (which closes all opened cursors), followed by another attempt to access the cursor (for example, the next time the loop is executed).
I DO NOT UNDERSTAND WHEN I AM COPYING FROM CUBE, WHY SAP BW will generate u201Cinvalid cursoru201D message. Not sure whether it is normal, i.e., not a real error,
My cube copying (from cube 1 to cube 2) is a straightforward procedure:
a.     Select Copy from Cube 1 and create Cube 2.
b.     Create Export Data Source from Cube 1 Menu.
c.     From Cube 2 menu, Create Update rules, In update rules select DataSource as 8Cube1.
d.     Create an Info Package for 8Cube1 under Infosource/DataSource and then run the package.
Certain no of records e.g.. 3248 or so get loaded and then the error messages are generated, why?
Really appreciate any help. I tried SM37, does not give any clue. I also Tried SM50, it shows me the process, but I still cannot figure how to generate developer trace.
Since behavior is same for several cubes I tried, something else also needs to be done, I do not know what???

Error when copying an existing application (built on 4.0.1) in Apex 4.0.2

Hi,
we're getting this error when we try to copy an existing application to a new one inside of Apex. The same error happens when we try to export and import the application.
Please note that the source application was created on Apex 4.0.1. Meanwhile Apex was patched to 4.0.2!
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-20001: Error creating dynamic action sub-action name=&quot;NATIVE_JAVASCRIPT_CODE&quot; id=&quot;13791109104919892&quot; ORA-02291: integrity constraint (APEX_040000.WWV_FLOW_PAGE_DA_A_AR_FK) violated - parent key not found <pre>begin wwv_flow_api.create_page_da_event ( p_id =&gt; 6237930219205626 + wwv_flow_api.g_id_offset ,p_flow_id =&gt; wwv_flow.g_flow_id ,p_page_id =&gt; 20
Any suggestions?
Jens

Check this thread Import unsuccessful in Apex 4
The reason could be because of an invalid target reference in the Dynamic action mentioned in the error message( in the API call at that line number ,use the p_name,p_page_id parameters to identify the Dynamic Action involved)

OLAP error when copying application

Hi all
When copying one of my consolidation applications I get the following error message when BPC attempts to create the OLAP cube:
Error message:: CreateOLAPCubeForApplication:CreateCube:'column' argument cannot be null.
Parameter name: column
Regards,
Byron

Hi Byron,
Have you tried copying any other application? Does it give the same error?
What happens when you create a new consolidation type application?

MIGO : Error when copying batch characteristics

Similar Messages

Maybe you are looking for