MIGO Field display to ready for Input

Hi,
Field EBELN purchase order is made mandatory for movement type 541
When i am doing MB1B its ready for input
But when i am trying to post 541 using MIGO the field is display only
I tried Enjoy settings for MIGO but the field is not available in modifiable or influencing node
Is there any way i can add the field or other workaround solution?
Thanks
Diwakar

Hi Jurgan,
Thanks for your reply ,
The requirement here is to track the link between 541 and 542 ,
The processor PO is updated by user in PO field and also added the vendor field (custom) which is again updated by user
while doing 541 on saving exit finds out the latest PO number for combination of Vendor and material and updates it in one field
Hence 541 document always contain the processor PO ,and vendor PO
Normally client use MB1B for this but , if required MIGO can not be used because of this PO field constrain
Hope its clear
Thanks
Diwakar

Similar Messages

Migo: field not ready for input

hello ,
i am stuck with an issue , which is ---
I have to add two fields in migo tablecontrol with dyndr- 200, for overdelivery tolerance and under delivery tolerance.
I am able to add them with my custom fields (ZZUEBTO,ZZUNTTO). and now fields are their in table control .
But now the issue , when i am initializing values to these fields using badi MB_MIGO_BADI ,and method LINE_MODIFY,
its showing warning that --
BAdI: Field GOITEM-ZZUEBTO not ready to accept input (Change will not be adopted)
Message no. MIGO050
Diagnosis
The contents of field GOITEM-ZZUEBTO have been changed in BAdI MB_MIGO_BADI (method LINE_MODIFY). The field, however, is not ready for input, so the change cannot be copied.
In method LINE_MODIFY, only the contents of fields that are ready for input can be changed.
if any one , please revert me back .
Thanx,
Jeetendra Chauhan
Edited by: jeet.chauhan on Jun 2, 2011 7:58 AM

Hi
If I understand you, you are modifing the standard dynpro SAPLMIGO 0200 (ie: the table control TV_GOITEM). I suggest you to avoid it and mantain these fields in a new tab with this BADI and methods PBO_DETAIL and PAI_DETAIL.
Regards
Eduardo

BADI Error: Field GOITEM-ACCT is not ready for input ? HELP!

I get this error message when testing my BADI in the MIGO Transaction. The BADI is the MB_MIGO_BADI. It is from the Line_modify method. Here is the entrie message:
BAdI: Field GOITEM-ZZREG_ACCT is not ready for input. (Change is not copied over)
Message no. MIGO050
Diagnosis
The contents of field GOITEM-ZZREG_ACCT have been changed in BAdI MB_MIGO_BADI (method LINE_MODIFY). The field, however, is not ready for input, so the change cannot be copied.
In method LINE_MODIFY, only the contents of fields that are ready for input can be changed.
The field is defined correctly in the screen as an input/output field - so it does not relate to that.
HELP!!!!!

Yes - I have reviewed all of the code and I never do any modify to the screen attributes of a field - although it sure acts like it. The screen lets me put in data and it stays there up until it finishes the method line_modify. The error is when i press return after i enter the field- it completes the BADI method and then goes to the main program and does field validation and always comes back with some internal table field called "work" with a value of 0 and it should be a value of 6.
Thanks!
Scott

Where is the "not ready for input" field stored in SAP?

Hi,
In the tcode CT04, the 'Additional Data' tab has a field called 'not ready for input'. I want to find this value in a table. I thought it was in CABN-ATINP but this does not seem to be populated all the time.
e.g.
1. characteristic ABCDE has the value checked in CT04 but there is no entry in CABN-ATINP
2. characteristic ZYXWV has the value checked in CT04 and there is an entry in CABN-ATINP
Does anyone know:
a) why?
b) how to find the value for point 1 above?
Thanks,
Kroc.

obviously, that is wrong.
It is true that the ATINP value for batches which have a reference field in CT04 does not ever change but having a reference field does not necessarily mean that it should be display mode.
Anyone know why the reference field stops the ATINP field update?
And how does the program know that it should be 'not ready for input' when the ATINP flag is not changed?
Thanks.

G/L account must be marked as ready for input

Hi All,
In our system (SAP 40B), I set a payer code reconcile account is 1000001. Then I add value "G/L Acc. 1000001, Alt. G/L 1100001" at IMG - Permitted Alternative Reconciliation Accounts.
I used F-22 Input fi document for this payer code, when I changed the G/L account from 1000001 to 1100001, the system display below message.
G/L account must be marked as ready for input
Message no. F5 439
Diagnosis
A reconciliation account which is entered when you enter a document needs
the marking "Reconciliation account is ready for input" in the master
record. In this case, this requirement is not met.
Where can I mark "Reconciliation account is ready for input" in the master
record?
Best regards,
Eric Yang

Dear Srikanth,
Because one payer code only can set one reconcile account, user want to change reconcile account from account A to B (only for this document). So I set "Permitted Alternative Reconciliation Accounts" let user can change AR reconcile account by T-Code F-22。
I have already sat the field 'Recon. acct ready for input' as display and solved this question, thanks for your help!
Best regards,
Eric

Supplement Auto Posting/Recon. acct ready for input

Hi SapGurus,
I need help, i want to know the details like as why and when to use in which type of GL
1) Supplementary Auto Posting
2) Recon. Acct ready for input.
As the difference between Recon. account for acct type (like K,D,A etc.) and Recon. Acct ready for input.
Regards.
Tej

Hi,
1. Supplement for Auto Postings : This can be used when a GL Account determined by automatic Account assignment is to be replaced manually. If you do not have this tick in the GL, you cannot change GL's which are generated by automatic posting.
2. Recon Account Ready for Input : This is used in case of Alternate Reconciliation Accounts. The Recon Account is usually entered in the vendor/Customer master and all postings happen to that GL's only. But in case for a single Vendor, you want to post in different Recon Accounts at run time, then you need to config the alternate recon accounts and mark this field"Recon Account ready for input' in GL master in FS00.
When you mark a GL for Recon Account type for A, K, D then that GL is marked as Reconciliation Account, but when you tick the Recon Account ready for input tick, then this Recon Account can be changed in run time at the time of posting.
Regards,
SAPFICO

Field not ready for input

Hi All,
I am trying to upload few materials using 'MATERIAL_MAINTAIN_DARK' FM.
But I am getting few warning messages as shown below.
The field MBEW-VJVPR is not ready for input and was therefore not transferred
The field MBEW-VMVPR is not ready for input and was therefore not transferred
The field MBEW-ZPLP1 is not ready for input and was therefore not initialized
Can someone please let me know the reason for the above warning messages?
Thanks and Regards,
Sachin M M

Please check thru MM01 whether these fields are display only or can be input enabled ?
a®

Field property indicator is not ready for input in sap

HI All,
i am trying to post transaction in GJT1.
i am getting below error "field property indicator is not ready for input"
i tried taking different asset,
now it is showing below error msg. please assist me on both the issues.
"system status CRTD is active"

I got the answer.
using GJVV i was able to resolve my issue.

Bex variable ready for input not displayed in webi

Hi,
I created bex query with some variables.
Variables are defined as "optional" but "ready for input". On productive system the prompts are all displayed, but when i transported the webi report to dev, some prompts are not displayed.
we are on BW 7.31 and BO 4.0. I also tried with BO 4.1. but the problem is the same.
I have no idea what's wrong here! Attached you can find some screenshots on my current settings.
thanks,
Katharina

Hi,
yes the reports are based on BICS and I moved them from prod to dev.
I already checked, the query panel does not show these variables!
I copied query and saved under new name, and i also created a new webi report upon this query, but some variables ready for input are still not displayed.
Regards,
Katharina

Mark field is Sales Order as "not ready for Input"

Hi there!
I would like to mark a field in a sales order as "not ready for input" i.e greyed out...would any one happen to know where I can control that? The exact field is screen field: VBKD-KURSK.
Thanks in advance
Elizabeth

hi,
check out these link.
VBAP-KTGRM and VA02??
<a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAGTFADMLO/CAGTFADMLO.pdf.">http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAGTFADMLO/CAGTFADMLO.pdf.</a>
<a href="http://help.sap.com/saphelp_46c/helpdata/en/c1/6484d4c25411d1a5250060087d1f3b/content.htm">http://help.sap.com/saphelp_46c/helpdata/en/c1/6484d4c25411d1a5250060087d1f3b/content.htm</a>
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1984%3Fpage%3Dlast%26x-order%3Ddate">https [original link is broken] [original link is broken]
regs,
jaga

Mark field in Sales Order as 'not ready for input'

Hi there!
I'd like to mark a field in the sales order as not ready for input. I need to refresh my memory on how this is done! The particular field is screen field: VBKD-KURSK.
Many thanks in advance
Elizabeth

Hi Elizabeth,
you could use a transaction variant (SHD0). Maybe ther e is another easier solution...
Regards
Elmar

User exit to open field for change / ready for input in delivery

Hi !
We need to open a field for change / ready for input in the header level of a delivery after it has been goods issued. Is there a BADi / User exit that can open a field for change / ready for input in the delivery after the delivery has been goods issued ?
Regards,
Ashok.

Hi,
As per the SAP Process it is not recommendable to edit the closed delivery. In order edit the devlivery you have to cancel the post goods issue and then update the same.
So there is a option like in PBO user-exits, we can force the status fields values and open up the delivery fields. But this would lead to inconsitency.
If you are updating just any information, you can always use the Text fields in header or items to update at any time of delivery processing.
Regards,
Sivparatap

Editing Options - Document Type 'Ready For Input'

I have a client who wants the default editing option for all users to have the Document Type set to 'Ready For Input'. Is this possible? I have explained how each user can change the own entry but they are not happy with this.
Any ideas?
Ged Griffiths

Hi Jurgan,
Thanks for your reply ,
The requirement here is to track the link between 541 and 542 ,
The processor PO is updated by user in PO field and also added the vendor field (custom) which is again updated by user
while doing 541 on saving exit finds out the latest PO number for combination of Vendor and material and updates it in one field
Hence 541 document always contain the processor PO ,and vendor PO
Normally client use MB1B for this but , if required MIGO can not be used because of this PO field constrain
Hope its clear
Thanks
Diwakar

Set specific rows in ALV grid ready for input

Hi everyone,
I have a question about how to set specific rows in ALV grid ready for input.
I know that I can make some columns ready for input before the ALV displayed,but I have no idea how to make specific rows displayed in the ALV ready for input.

Hello Aaron
For editable columns we can use the fieldcatalog (LVC_S_FCAT-EDIT = 'X') but for rows you need to define editability on cell level.
The required steps are documented in sample report BCALV_EDIT_02. Below I point out a few crucial points:
*§1.Extend your output table for a field, e.g., CELLTAB, that holds
*   information about the edit status of each cell for the
*   corresponding row (the table type is SORTED!).
DATA: BEGIN OF gt_outtab occurs 0. "with header line
        include structure sflight.
DATA: celltab type LVC_T_STYL.
DATA: END OF gt_outtab.
*§3.Provide the fieldname of the celltab field by using field
*   STYLEFNAME of the layout structure.
   gs_layout-stylefname = 'CELLTAB'.
   CALL METHOD grid1->set_table_for_first_display
         EXPORTING i_structure_name = 'SFLIGHT'
                   is_layout        = gs_layout
         CHANGING it_outtab        = gt_outtab[].
Note: in the sample report only field SEATSMAX is editable. In your case you need
to fill CELLTAB for all fields in a row.
*§2.After selecting data, set edit status for each row in a loop
*   according to field SEATSMAX.
LOOP AT gt_outtab.
    l_index = sy-tabix.
    refresh lt_celltab.
    if gt_outtab-seatsmax ge 300.
        perform fill_celltab using 'RW'
                             changing lt_celltab.
    else.
        perform fill_celltab using 'RO'
                             changing lt_celltab.
    endif.
*§2c.Copy your celltab to the celltab of the current row of gt_outtab.
    INSERT LINES OF lt_celltab INTO TABLE gt_outtab-celltab.
    MODIFY gt_outtab INDEX l_index.
ENDLOOP.
ENDFORM.                               " SELECT_DATA_AND_INIT_STYLE
NOTE: LVC_T_STYL is a SORTED table type. Thus, take care that you are using the
INSERT ... INTO TABLE statement and not APPEND (because then nothing is appended
to the CELLTAB itab).
IF p_mode EQ 'RW'.
*§2a.Use attribute CL_GUI_ALV_GRID=>MC_STYLE_ENABLED to set a cell
*    to status "editable".
    l_mode = cl_gui_alv_grid=>mc_style_enabled.
ELSE. "p_mode eq 'RO'
*§2b.Use attribute CL_GUI_ALV_GRID=>MC_STYLE_DISABLED to set a cell
*    to status "non-editable".
    l_mode = cl_gui_alv_grid=>mc_style_disabled.
ENDIF.
ls_celltab-fieldname = 'SEATSMAX'.
ls_celltab-style = cl_gui_alv_grid=>mc_style_disabled.
INSERT ls_celltab INTO TABLE pt_celltab.
Regards
Uwe

Interactive form within WebDynpro not ready for input

Hi,
After building a simple interactive form with the form builder, I want to fill in the fields in the adobe form. The form is included in a ABAP web dynpro application as Interactive form and the enabled property is checked. But the form fields are still read only and not ready for input.
The interactive form uses ZCI layout and an ABAP dictionary based interface. The menu item include scripting was hit and I can not fill in the fields. Instead I only see read only fields. When previewing the form in the forms designer, the fields are open.
Please assist.
Regards
Ravikumar

hi Ravikumar,
The following code fragment shows how this input readiness can be set up:
method WDDOMODIFYVIEW.
data: LR_INTERACTIVE_FORM type ref to CL_WD_INTERACTIVE_FORM,
LR_METHOD_HANDLER type ref to IF_WD_IACTIVE_FORM_METHOD_HNDL.
check first_time = abap_true.
LR_INTERACTIVE_FORM ?= VIEW->GET_ELEMENT(u2018INTERACTIVE_FORM_1u2019).
LR_METHOD_HANDLER ?= LR_INTERACTIVE_FORM->_METHOD_HANDLER.
LR_METHOD_HANDLER->SET_LEGACY_EDITING_ENABLED( abap_true ).
endmethod.
Hope this helps.

MIGO Field display to ready for Input

Similar Messages

Maybe you are looking for