Migo for subcontracting po- Excise invoice is posted later to material docu

Dear all,
While we are doing migo for sub-contracting PO we are getting an error like this  Excise invoice is posted later to material document.
process
1. Create subcontracting PO.
2. Issue material 541 MVT.
3. Create sub-contracting challan- dated 8-8-2010.
4. Migo date 8-8-2010.
while entering subcontracting challan no & year, error messege  is coming as Excise invoice is posted later to material document.
Pls give solution.
Thnaks & regards
madhu

Hi,
You will have to post the MIGO at least one day after the creation of Excise Challan.
Regards,
Prashant Kolhatkar

Similar Messages

  • Excise document is posted later to material document  Messaage no.81576

    hi,
    at the time of reconciliation of sub challan i am getting this message i.e error message.
    in the material document there r two materials which has to be reconcile for that i have entered two challan .

    Hi,
    The excise posting date should be equal to or less than material document posting date.
    Please check your excise document posting date and material doc posting date.
    Regards,
    Bharat.

  • Control  for cancelling the excise invoice when MIGO done against this invo

    Is there any user exit or BADI to control the cancellation of exicse invoice when MIGO done against this excise invoice.

    Hi,
    You can put your validation during invoice cancellation via copying requirements of billing types at the cancellation section.
    Create your own routine and assign it to corresponding billing types.
    Hope this help.
    Cheers,

  • New Output type for purchase return excise invoice..?

    Hi all
      For purchase return process with exisable material.
    Here I m using the transaction
    1.J1IS to create purchase return excise invoice and
    2.J1IV for posting to accounts & print purchase return excise invoice
    .In standard SAP the output for purchase return excise invoice is JEXC.
    here my query is started,
    ABAPer created the new program for purchase return output with all new layouts,
    And from functional side i have defined new output type for the same as YEXC copying from JEXC.
    While doing the transaction J1IV, i getting the output type YEXC, i m not able to print preview.
    To proceed further i need some body guidence. Like where to assign the output type.
    some body can give some inputs .
    Thanks
    sap-mm

    Hi AP thanks for ur immediate response.
    But i have done all the configuratuion in NACE only.
    There in nace i m not able find out the mistake or missing configuration.
    Can u expalin me step by step process end to end .
    Thanks
    sap-mm

  • T.Code For List of Excise Invoices

    Hi,
    Please refer me is their any transaction code for List of excise invoices like list of invoices VF05
    Regards
    Kir

    hi
    Use the t code J1I7 help for internally generated documents
    here you can get the details by
    excise group
    excsie transaction type
    also on selection criteria like
    no postings done
    part 1 and part 2 posted
    part 1 posted and part 2 not posted
    regards

  • Item is not available for reference to Excise Invoice, Deselect Item OK!

    Hai,
    I am doing a Sub contracting scenario, in which the excise is applicable to main material, i have maintained condition records, captured excise But while doing GRN i am getting Item is not available for reference to Excise Invoice, Deselect Item OK!
    Message no. 4F279
    above errror
    Plz solve my problem

    Whether you tested case in development server ???
    Are you sure SAP Note applies to our version & support package level ?

  • Unable to create Accounting document for my Outgoing excise Invoice

    Dear All,
    I am implementing sales from Factory. I am unable to creat accounting document for my Outgoing excise invoice.  When I click the Utilization button, The excise invoice type is selected Deemed.
    1. How to control which Which Excise invoice type should be selected in J1IIN.
    2. For Deemed exports will system not genererate Accounting document for Excise Invoice?
    3. Where to view the excise invoice document types (Like Billing and order types)
    Thanks & Regards

    For deemed export sales,
    -Accounting documents will not get generated. (ref: Excise Acct Determination in CIN settings, you will not find Excise Tranraction type:ARE3 for which G/L account will not be assigned)
    -Excise Invoice type will be automatically triggered based on configuration : Excise Group / Series Group detetermination.
    - For Deemed Exports , only Quantity will get updated in RG1, but not the value. thats the reason, accounting document will not get generated.
    - This excise invoice is created, for - to update the RG1 registry / ARE3 creation.
    hope it clears
    regards,

  • SYSTEM CHECK FOR CREATION OF EXCISE INVOICE WITHOUT PGI

    Hi SAP guru's i need help in this issue++
    See i am creating delivery and i did'nt do PGI ,after this i am creating Proforma invoice (here Proforma is must before creating commercial Invoice),with reference to Proforma system is accepting to create Excise invoice without PGI.so,i want system should'nt allow user to create Excise Invoice until unless if he do PGI.I know there is routine for PGI and proforma,is there any kind of routine for PGI and Excise invoice
    Thanks & Regards

    Dear sapsd79,
    it is related to copy control - item level
    check the following link,
    Restrict proforma invoice
    any doubt , please revert
    saravanan
    Edited by: k saravanan on Sep 30, 2008 11:42 AM

  • Doing MIGO for subcontract item

    Hi Friends,
    When I am doing MIGO for Subcontracting items, I can explode the BOM & see the child parts. At that time I can change the qty. & unit of measure for child products. Is it possible to restrict these.
    I make BOM for the mail item & made PO accordingly.
    Because of this the value of the main item may be valued at higher or lower, which is not correct.
    Regards

    hi,
    the component u r attaching in the SC po, is planned consumption ratio, which is going to be used for conversion of finished goods-child material.
    here when u r making the GRN for child material, always there should be flexibility of changing the component conusmption, as there is always differance in planned and actual conumption.
    when u r sure that there is a change in conusmption pattern, u need to change the qty of the component while making the GR.
    (as per SC challan referance)
    if at after all goods receipt is done , and u observe the differance in component consumption, u can always adjust the same by MIGO_GS against PO-GRN.
    u cant make the component field in MIGO as blank and which is not advisable tooo.
    Edited by: manipal on Jan 8, 2008 6:15 AM

  • STO - Excise tab not getting displayed in material document after posting.

    Dear all,
    We are facing an STO issue where in after we have done the receipt at the receiving plant with excise, the excise tab does not display in the GR material document.
    It is plant to plant stock transfer with excise, the process that we are following as given below:
    1) STO PO - ME21N
    2) Outbound delivery - VL10B - Post PGI in VL02N
    3) Outgoing excise invoice - J1IIN  - With the key DLFC.
    4) GR - MIGO with excise invoice capture.
    During GR posting in MIGO screen the system does display the excise tab, we enter the outgoing excise number and the corresponding values appear in BED, ECS and HCES. We post the GR material document.
    But after posting the material document if we display the same GR material document it does not show the excise invoice tab. And since we are not having part 1 entry number we are not able to post the part 2 entry in J1IEX.
    Request to please do let us know if we have missed out on any configuration or master data.
    Regards,
    mahesh.

    Hi,
    Do the all customization setting for CIN for reference check the following link for India. and Material management
    http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
    You have to maintain Excise master data for material,vendor and PLant in J1ID .
    reward if helpful,

  • How to Create Excise Invoice (J1IIN) with order related billing document

    Dear Experts,
    Is it possible  to Create Excise Invoice (J1IIN) with order related billing document? How? please guide
    Regards
    BK GAIKWAD

    Sir,
    We have make the supplementary Invoice (Debit Note) as per below process
    1) Create sales order_VA01
    2) Create billing document_VF01_with reference to sales order
    3) Create Excise Invoice With J1IS (Other Movement) It is manually job & due to heavy work load (create 200 invoice  per day) it is not possible to do manually.
    Hence we want to create excise Invoice with J1IIN instead of J1IS, any alternative solution for that?
    Regards
    BK GAIKWAD

  • Report to get correct posting date of material document?

    I have material number (matnr) and plant (werks). Which report do I use to get posting date of material document (mkpf-budat) ? Thanks!

    Hi,
    Use MB51 or MB5B as per your convenience.U will get the Matl Doc,Mov Type & Posting Date.
    Award points if helpful
    Thanks & Regards
    Saeed Arif

  • EXCISE TAB IN MIGO FOR SUBCONTRACTING Challan

    HI Gurus
    In Subcontracting, I have created a sub contracting challan. At the time of MIGO, in Excise invoice tab page , I am entering the Challan no & year and then enter
    After that i have saved the MAterial document
    But when i m displaying  material document i cant see the excise tab ??What can be the possible reaosn
    Also i have checked the  Chapter ID ,Vendor excise detail everything is maintained but still i am not able to see the excise tab
    plz suggest
    regards
    shailesh

    Dear Frienr
    Can u plz let me know what is the note no an where i can find that note no
    point will be duly awarded
    regds
    shailesh

  • BAPI for J1IJ depot excise invoice required

    Hi All,
    Please let me know the BAPI to create depot excise invoice with J1IJ from a delivery.This require to automate the process.
    Please let me know the parameters also.
    Thanks'
    Mukul Kumar

    Hi Mukul,
    CIN does not support any BAPIs for goods receipts and excise updates.
    However, CIN uses MB_MIGO_BADI definition and CIN_PLUG_IN_TO_MIGO implementation. You can create multiple implementations of this BAdI. You can use the same BAdI for single step capture and post of excise invoice in MIGO.
    Regards,
    Rajasree..

  • How to correct BED amount in internal excise invoice already posted?

    Hello,
    Our client has entered an incorrect BED amount internal
    excise invoice. This incorrect BED amount is reflecting in RG23D. The
    internal excise invoice is no longer possible to
    change because it was already posted and the sales were already made.
    How can we correct the BED amount in a posted internal excise invoice
    without doing any cancellation?
    Thanks.

    Hi Venu
    Goto <b>V/08</b> and select your pricing procedure.  Here see for excise conditions, there is no "<b>tick</b>" in the tab "<b>Condition used for Statistics</b>".  If tick is there, untick and try to create a fresh document.  Now the values will flow into accounting document.
    Thanks
    G. Lakshmipathi

Maybe you are looking for