MIGO Goods Receipt - error with Movement Types on GR from Inbound Delivery

Hi,
I am getting an error message when processing a Goods Receipt (MIGO) against an Inbound Delivery with as 2 lines with different movement types, a standard 101 and a 970 (the latter being a user defined movement type for free goods).
The error message I get is 'Movement type 970 is not allowed; only 101 is allowed
Message no. BORGR622'
This error message only occurs with a Goods Receipt against an Inbound Delivery, we are able to process a similar Goods Receipt using MIGO against a Purchase Order, with two different movement types 101 and 970, without any issues.
It is only a problem with a GR against an Inbound Delivery which is necessary in our MM solution.
As anybody and ideas how to resolve this? I cannot see anything obvious in config, and have not spotted any SAP OSS notes either.
I should mention that we can process a single line Inbound Delivery and Goods Receipt for the Movement Type 970 also!

Thanks for the reply. The Price Control Indicator is 'S'.
The solution was set up at my company before I joined, but the different movement type is to enable the free goods stock to make a Finance posting to a Bonus Stock GL Account. Bonus stock sale update the same account.
As I mention the '970' movement type worked fine with Goods Receipt against a Purchase Order (it was coded into to the user exit).
The MM procedures were changed to use the Inbound Delivery matched to the PO, this had a result that when the Goods receipt was posted in MIGO it posted as 101 movement, as the PO number was not being recognised.
By making a further change to the user exit we able to suggest the '970' movement type, but now get the BORGR622 error I refer to.
'511' is not possible against an inbound delivery either.

Similar Messages

Problem in Goods receipt of serializedspare (Movement type: 262) on Maintenance Order

Dear Experts,
When i create a maintenance order for equipment and assign serialized spare parts With negative sign and valuation type damaged then i go to T-code MIGO to receive the spare parts (Movement type 262), the below error message has been showed up. This is because, I want to receive the spare part into the warehouse with valuation type (Damaged) differ from the valuation type of issuing it at the first time (Under test)
So is there a way to receive a spare part with the same serial number on a different valuation type than that one it has been issued upon it firstly.

grating jagdeep
this screen shoots for what you have asked for

MB1B error with Movement type - 411 / E

Hello MM Sapperu2019s,
I have an issue in transaction MB1B where I need to move the sale order stock to unrestricted with movement type 411 /e I am getting the error,
Dlv. type (dlv. catgry OD for mat. XXXX and BWART 411) cannot be determined
Message to Moderator,
I believe this issue has been discussed earlier in SDN but not with similar to my case. Hence not to close my thread as it has been disused earlier.
I also refer the below links but couldnu2019t able to find the detailed root cause for my issue.
Error in MB1B posting (Issue is related to 411/Q)
Delivery Type cannot be determined in subcontracting (Issue related to Subcontracting)
Also I have referred the OSS notes and my observation are as below,
1238654 which has been mentioned by Jurgen and observe this is not relevant to my case as we are using the standard Ware house.
540185 which has mentioned by kuberk and identified table T156Q is perfectly maintained.
Hence please help me with your valuble inputs to identify the detailed rootcause for my issue.
Br
Kumar.S

Dear Kumar,
Can you tell me the exact error number like VF569........ please.
So, I'll able to tell you exactly......
Thanks
Farrukh khan

MIGO Goods receipt Error

Dear All
At the time of goods receipt with reference to 303 movement type system through out the error as " In consistancy in classifycation Data"
after that its terminating the session ..what is the problem and solution.. for this
Regards
Kumar.

Hi,
Check the shelf life data like Remaining shelf life , Total shelf life etc for the material.Accordingly you provide the value.please check the values in the batch to which you are posting during MIGO.Tally both the things.
Is it not possible to give values to other charectarestics?Could you please reply back with the all posting details?
Regards,

Automatic PO form goods receipt without reference Movement type 501

Hi,
My client receive sample material from the vendor that is without reference to PO, but upon approval of sample the vendor has to make the payment for which i do not have the reference document number.
To arive at the solution i wanted to generate automatic PO for movement type 501, for which i have checked the movement type settings, 501- automatic PO, i ahve maintained the info record, and during GR for movement type 501 i enter the vendor even than system is not generating any PO in backend, I have centraalised purchase organization assigned to the plant.
can anyone suggest me if i am missing any settings,
Suggestions willbe worth appreciating..\
Thanks
Sarf

Hi,
You need to configure the following steps for creating automatic PO in MIGO transaction.
1.Activate the auto PO in Material and Vendor Master.
2. Maintain the Info record.
3.Assign the Standard Purchase organisation for the plant you want to create auto Po.
Path: ENTERPRISE STRUCTURE-ASSIGNMENT-MATERIALS MANAGEMENT-ASSIGN STANDARD PURCHASE ORG FOR PLANT.
4. Activate create PO automatically for movement type (101,501).
Path: MM-INVENTORY MANAGEMENT AND PHYSICAL INVENTORY-GOODS RECEIPT-CREATE PURCHASE ORDER AUTOMATICALLY - here you can activate for the mvt type you want.
5.In MIGO screen, goto menu Settings and click default values , you will get a screen where you can check the mvt type 101,501... are maintained in mvt type column. if not you just enter the mvt type which you want. and click adopt tab.
6. Now you do GR using 501 mvt type and give the material and vendor ..
It will work.
Regards,
abi

Goods Receipt by using movement type 511

Dear All,
We are inwardig some goods using 511 movement type.
Is there any possible to inward the goods as special stock ( with respect to production or sales orders) aganist 511 movement type.
Regards,
Venkat.

Hi
Not Possible
In Movement type: 511 you cannot use Special Stocks
Regards
S.Baskaran

MIGO Goods Receipt error- The customer does not exist in KNA1

Hello all MM Gurus!!!
I am a SD consultant trying to wear other caps as well. Basically, I was trying to do a GR, using MIGO with ref to a PO ( of type NB, the standard one).
After selecting all the line items ( OK ) by confirming the details populated from the PO, I did a Check and when it said everything is OK I tried to Post the GR.
Then it says " The Customer does not exist in KNA1". It does not say which one.
Can any one help me out?.
Thanks in advance.
JDoe

Manish,
Thanks for your reply.
>
Manish Kumar Agarwal wrote:
> Please give the complete details of PO.
> What is the account assignment category in to po and the PO is for external procurement or internal and what is the item category u r using in PO.
The account assignment category is M and in the PO, the Item category field is not maintained, which in turn means "Standard".

Vendor Evaluation_On time delivry with Mov type 103

Hi,
We are in process of implementing Vendor Evaluation in our system.
In th eprocess we came to know that for calculating score for sub
criteria "On time delivery" system only considers the Goods Receipt
posted with mov Type 101 and 105.
We have a business scenario in which we first post 103 and ask user
to do the Quality check of the material received.Once the user accept
the material we accept the material by posting goods receipt through
Mov Type 105.
this acceptance time may differ case by case depending on the
material.
Now if we go by the standard system settings the Vendor's score will
be affected if the users acceptance and hence the 105 posting is
delayed.
Kindly guide us how to overcome this issue.
Rajesh

Thanks...
If possible can you please explain , how the enhancement MM06L001 will overwrite the score with an example.
Rajesh

Error in Goods issue with movement type 541

Dear Users,
I have created a Sub contracting PO. After that when i m issuing the goods to vendor with movement type 541, its giving the following error: Movement type 541 is not planned for this operation.
Please help me out

You can provide material to vendor either using Transaction codes :
1. MIGO - Transfer Posting - Other - Movement type 541
2. MB1B - Movement type 541 or
3. ME2O - Mention the vendor & execute
S. Kumar

MIRO(Invoice Verification) posting date is lesser than MIGO(Goods Receipt)

MIRO(Invoice Verification) posting date is lesser than MIGO(Goods Receipt) posting date.
Explanation:
Miro sholud be posted after the GRN has posted. It means that the Posting date of Miro should be greater than or equal to the Posting date of Migo. But I am facing the issue that I can able to post the Miro before the Migo date..
For example: I have posted the Migo(Goods receipt) document with the posting date u2013 10.8.09 and at the same time I can also able to post the Miro(Invoice Verification) posting date as u2013 5.08.09. This is should not be allowed . Kindly give me the solution. Is there any options in SAP standards to restrict this type of Postings(without using user exit).
regards
Varadharaj

Hi
you need to use BADi for this INVOICE_UPDATE
you can give logic as whil;e MIRO system will compare posting date with MIGO doc , then create a Z error msg in se91 nad assign it in that badi
take help of ABAPer, check following link
[LINK |GR date lesser than the PO date, the system should show an error message.;

Problem in Material issue to WBS with movement type 261 Q

Dear Experts,
I have sceario where i have to make delivery from project.But when i am issuing goods to WBS with movement type 261 Q its showing following errors.Can anyone put some light on it.
Special stock 0001 Q AS0111 000000000000000015 of this material does not exist
Message no. M7076
Diagnosis
No special stock Q of the material (batch ) exists in storage location 0001 for AS0111 000000000000000015.
Regards

Hello,
This is simple scenario. System is using 281 Q in CNS0. As you have procured through Q indicator WBS is mandatory in PO.
So when you will take GRN , it will be consider as project stock if quality check is not there else will go in quality first. Check MBBS report for this.
Now do CNS0 with reference to project number. So materials from project stock will get consumed when you will do PGI for CNS0 material document.
Your scenario is failing in this stage becasue system didnt find stock against particular WBS element.
Check this and revert.
Keshav

Goods receipt from Inbound Delivery

My requirement is to get the Goods receipt no that got generated for a particular Inbound Delivery!
Please do give me table used to get the same..

Hi Sravanthi,
Whenever a GR is made a Material Document number is created.
U can view the MaterialDocuments from MB03 transaction
and it's values are stored in tables are MKPF and MSEG.
cheers,
Kalyan

MIGO Goods Receipt multiple Movement Types?

Hi,
Is it possible with MIGO Goods Receipt using Inbound Deliveries to have multiple movement types? the reason I ask is I am getting the following error 'BORGR622 Movement Type XXX not allowed; only 101 is allowed' when trying to receipt a Line no. with different Movement Type to the earlier lines.
We do have the same problem if we receipt in MIGO Goods Receipt directly to the Purchase Order, we can happily post a document which has the normal '101' movement type and another Custom movement type.
The reason for the requirement is to do with Account Determination, we have free bonus goods lines which are zero price on the purchase order - the price difference gets posted to a bonus stock account instead of the usual price difference account, by using a Custom Movement Type - the bonus stock agreement (kind of like BOGOFs Buy One get one free) is passed to the Customer with similar account determination updating the same bonus stock account.
This works fine for MIGO receipt directly with the Purchase Order but we get the error message above with Inbound Deliveries.
I cannot see anywhere obvious in config which might sort this issue, but am unsure why multiple movement types on a Goods Receipt would be allowed against a Purchase Order but not an Inbound Delivery.

Hi,
Try with the below mentioned settings,
goto SPRO -> Materials Management -> Inventory Management & Physical Invetory -> Settings for enjoy transactions -> Settings for good movements(MIGO) -> Settings for transactions & reference documents -> select MIGO_GR -> Click on transaction/event -> select goods receipt -> click on reference documents -> remove the tick mark on active.
Regards,
Prabu

Goods Receipt Report With 101 movement type using bapi_goodsmvt_create

Dear Abapers,
i am getting some problem, i got requirement like Goods Receipt Report with 101 movement type using
bapi_goodsmvt_create and data should upload through excel sheet.
still facing problems, i have searched sdn forum n sdn code also, but relevant answer i could not find.
What are all the inputs i need to take and please give some valuable inputs to me.
please do help ..... thanks for advance..
Thanks & regards,
Vinay.
Moderator message : Spec dumping is not allowed, show the work you have already done. Thead locked.
Edited by: Vinod Kumar on Sep 27, 2011 10:58 AM

Dear Abapers,
i am getting some problem, i got requirement like Goods Receipt Report with 101 movement type using
bapi_goodsmvt_create and data should upload through excel sheet.
still facing problems, i have searched sdn forum n sdn code also, but relevant answer i could not find.
What are all the inputs i need to take and please give some valuable inputs to me.
please do help ..... thanks for advance..
Thanks & regards,
Vinay.
Moderator message : Spec dumping is not allowed, show the work you have already done. Thead locked.
Edited by: Vinod Kumar on Sep 27, 2011 10:58 AM

Goods Receipt through internal order with movement type 262

Dear Friends,
some of our users making entries like the following
1. created Internal Order
2. Creating Reservation with movement type 262 ( which not issued material through movemnt type 261)
3. Stock updated
i just want to confirm, we not issued like X material, even stock not available, we can make entries like the above, To receive X material from Internal order/ subcontractor using movement type 262.
kindly advice please if it is wrong then tell me the process.
Regards,
Rajesh G

HI,
if we receive material from subcontractor what process we can do...
can you explain your issue exactly what problem you have at your end .
I think you want to take subcontracting material inside which is not in sap system now,it may finished material or it may component.If you don't want to show this material as at vendor now
then you can try movement type 501 or through physical inventory t-code MI10
Regards
Kailas Ugale

MIGO Goods Receipt - error with Movement Types on GR from Inbound Delivery

Similar Messages

Maybe you are looking for