Migo GR subcontracting 543 error quantity for BOM

Hello,
i have a BOM with 1 material and with quantity 1 to 1.
i have a schedule agreement....
we use ME2O for subcontractor send composant...
when i use migo for reception...i have a problem with the quantity of composant
for exemple
BOM
Maratial A ==> Material B with quantity 1 to 1PC
at Migo
code movement 101 ==> Material A =10PC
code movement 543 ==> Material B = 2PC
why i have this error?
BOM has no modification and as universal BOM( code 3)...
some others reception= ok
thx a lot
Edited by: Driss Ait-hassoun on Mar 21, 2011 4:21 PM

Hi All
Is it right that the MIGO will try to make the GR into the same storagelocation as it was send from.
the sceneraio is that I have send some goods from our main storage location and want to do the GR in our GR storagelocation, but when I try to make a GR in MIGO there is two lines one for GR into main storage and one for GR into GR storage location
Is this normal or did I need to change anything, the problem is that I got a error if I try to GR into main storage.
Jakob

Similar Messages

How to get calculated component quantity for BOM like in CS12

Hi All,
Please let me know how to get the calculated component quantity of BOM similar to the field in CS12.
Regards
Mahesh

hi,
[http://www.sap-topjobs.com/SpecialPP/overviewdoc1.pdf]

In subcontracting the component quantity consumed more than the BOM quantit

Dear Experts,
In subcontracting the component quantity ( 543) consumed more than the BOM quantity while doing GR, so please let me know what may be the possible reasons for the same.
Regards,
Balu

Balu
may be the suncontractor needed more than the BOM quantiy.It is the case of overconsumption of components.

How to put different component quantity for different subcontracting vendo

How to put different component quantity for different subcontracting vendor

Hi,
To achieve this, you have to create alternative BOMs for the assembly with different component quantities.
First create in Alternative BOMs in CS01
1. C223 - Create Production Versions for the the assembly for each Alternative BOMs
For e.g. 0001 for Alternative BOM 1 and 0002 for Alternative BOM 2 and so on...
Production Version 0001 - For Vendor 1
Production Version 0002 - For Vendor 2 and so on...
2. ME11 - Create Subcontracting Purchase Info record for assembly, plant, purchase org and vendor 1 (Here in "Purchasing Data 1" screen, specify the Production Version "0001"), similarly for vendor 2, specify production version "0002" and so on...
3. ME21N - In PO, system will propose the BOM as per Production Version which is assigned in Purchase Info record for the vendor, material (assembly), plant and purchase organization.

Sales BOM its possible edit the quantity for child items in Sales Order

Hello friends, this is my issue
I need to use a Sales BOM but the problem is that the child items in any Document marketing, such as Sales Order, the quantity for that child items it´s possible to edit independant of the father item code, and I don´t want this because allows to users to change diferent quantity for child items versus the quantity of the father item code.
Thanks in advance

Thanks Gordon yes I know even with this solution the problem is the with transaction notification is not possible determine that event to block, or if you know how or get some tip, please send me, because I analyze the requirement and I couldn´t develop.
Tks

Error : T161W: Vendor+subcontracting vendor not allowed for 2-step stock tr

Hi Gurus,
When we creating a STO to sub contractor vendor ( in the delivery address tab we are entering the vendor # and activating the SC vendor check box)we are getting the error message as "T161W: Vendor+subcontracting vendor not allowed for 2-step stock transfer".
Message no: MEPO140
Note:
The STO is creating with out error in ECC 5.0 for the above scenario but when i'm trying the same in ECC 6.0 in another system I'm getting this error, Can any one please advice.
Thanks in advance,
Sai

Hi Charlie
I had same issue and we sloved it. but i have one more issue here.
We have created Po and SC Vendor is not check marked. When we go into the change mode of Po i can't see the field at all. but its availalbe in disply mode.
I am using ECC 6.0, Please suggest why this is happening. I need to put check mark for SC vendor.
thanks,
Raju

CK40N error: Missing authorization for BOM (SAP Error: CK-581)

Hi Experts,
When running CK40N, I found an error message Missing authorization for BOM (SAP Error: CK-581).
If this is the problem of my CK40N that make object cannot be costed, how can I solve this? Is this relate to SAP authorizartion?
Thanks.
sbmel

Hello,
While doing Costing run CK40N or Cost estimate CK11N, you require having authorization of T. Code CS03 for the plant in your SAP ID as it explodes BOM.
Kindly contact basis team & take the authorization on your SAP ID.
Regards,
Anand

Decimal on quantity for GI and BOM

Dear Respected Gurus,
can any one tell me how to allow decimal quantity for inventory transactions and BOM.
Like GR, 12.20
Like GI, 12.20
Like BOM, 12.20.
Regards,
qsm sap

Hi,
Please try by allowing the decimal values for the Unit of measure.
Thx
Raju

MIGO against Subcontracting PO

Hello Experts,
We are doing the MIGO against subcontracting PO/SA .When we refer the reference docuemnt as PO/SA system will propose the item details from BOM against 543 movement type and actual GRN quantity which is entered by User.
Where do we make the setting for 101GRN -543 CONSUMPTION (in background ) SETTINGS .
Also we have requirement that user should not make any modifications in quantities against the components (543) in MIGO screen.
Any enhancemment for the same.
With BR
Steven P

In Purchase order Item material data-> Component->qty is fixed one field is there. if you check this one user could not change in MIGO.
In BOM also fixed qty field is available. There also you can check it.
Edited by: madansiva on Oct 20, 2010 5:56 PM

Goods receipt more than intransit quantity for SA

Hi All,
While doing a testing on stock transport order for 2 different company code, noticed that during MIGO in receiving plant system is allowing to receive more than in-intransit quantity for a schedule agreement with agreement type LP and by showing a negative stock in intransit.
Is there anyway to have the system block with error message from preventing user to receive more than intransit quantity for a schedule agreement?

negative stock in transit is not allowed.
so it must originate for a SAP bug.
E,g, OSS note 527403 explains a case for IS-OIL Industry solution.
Oss note 210472 a special case regading previous month.
I found about 60 OSS notes when searching with "in transit negative"

Set up Tolerance Limits with Date and quantity for GR

Hi Experts,
We would like to set the GR Tolerance Limits with Date and qty.
how to set the Tolerance Limits for Date and quantity..??
if we created PO 100qty and date 01-05-009.
if we receive the goods on 20-04-2009 and 50qty...
For GR .. Migo should be give error message..
where can i set this Tolerance Limit Configuration.... can u please explin me..
Thanks in Advance,
Anthyodaya .

hi,
You can do one thing...
Activate the SLED check...
BY this when the date goes earlier or late from the expected date, then system show you the messages like:
1. Earliest delivery date is DD.MM.YY..
2. Expected delivery date was DD.MM.YY...
In std sap system, the second message is already error message...so when get late delivery then it'll not be possible to maintain the GR...
For the qty varinace, activate the quantity variance either via over/under delievery tolerances..or
Via SPRO settings...
SPRO >> MM >> LIV >> Invoice block >> check for qty tolerances and make the settings as per your requirement...
Regards
Priyanka.P

Can not put decimal quantity in BOM quantity

Hi all,
while go to put decimal quantity in BOM quantity, sytem is not allowing me. It is only allowing me to put only integer number.
with regards,
partha

Partha,
Is it an error or warning message. Like Suhas said it might be due to User settings. Change the format for numbers to decimal (middle one) in User settings.
IF it is a warning message it may be that the UOm does not support decimals as per customizing. Check in CUNI.
Regards
Ram

How to set error message for 541 Movement type

Dear gurus,
            I want to know that is it possible to set error message through any configuration? My requirement is that when we create issue document using m.t 541 it will not allow me to process that document without releasing PO document.so for that i want to set error message.
<removed by moderator>
Message was edited by: Jürgen L

Hi,
   The subcontracting goods issue can be done even without PO reference. If your organization is strictly following the goods issue against PO only and you want to restrict the goods issue if the PO is not released, then you may check the below option. Please note that the below option is available in standard only from EHP 4 or above.
1. Refer the KBA: 1915825 - Transfer Posting reference to a Purchase Order in MIGO and activate the PO reference option in MIGO - Transfer posting.
2. Restrict the use of 541 movement in MB1B - Go to OMJJ and enter movement type as 541. Now go to "allowed transactions" folder and remove MB1B. Now the user cant use 541 in MB1B.
3. Maintain the field - Purchase order as mandatory field for the movement type 541 in OMJJ.
4. Train the users to use MIGO - Transfer Posting - Purchase order option for goods issue with 541 movement.
5. If the PO is not released, system wont allow to use the PO in MIGO - Transfer Postings.
6. If the user is selecting Transfer Posting - Other, system wont check the PO and hence it will allow to post the goods issue even if PO is not released. You may take organizational measures to restrict the usage or you may check for authorization concept - Refer the note: 773003 - MIGO: No authorization object for action/reference document
   If you are below EHP 4, there is no standard functionality available for the requirement as of my knowledge. If so, you may go for development to restrict the same.
Regards,
AKPT

Selecting, reading and sum of billing quantity for last 12 months in transformation end routine

Hi experts,
i have requirement to write end routine to read a DSO for last 12 months sales quantity for each month and sum value pass to keyfigure
not interested using bex variable, while data loading from source to target dso in end routine i am trying to read another DSO which is same as my
target dso where information is stored by fiscal period, year material etc. finally there is a keyfigure in target whih needs to be filled with sum of 12
months sales quantity, for each record form sourc to target maximum of 12 records will be in read dso (for 12 months) my routine is like below.
i am not expert in abap please kindly gothrough and guide me in this
TYPES: BEGIN OF s_/BIC/AZOSLS00,
FISCPER type /BI0/OIFISCPER,
FISCVARNT type /BI0/OIFISCVARNT,
PLANT type /BI0/OIPLANT,
STOR_LOC type /BI0/OISTOR_LOC,
/BIC/MATERIAL type /BIC/OIMATERIAL,
VTYPE type /BI0/OIVTYPE,
BILL_QTY type /BI0/OIBILL_QTY,
END OF s_/BIC/AZOSLS00.
DATA: it_/BIC/AZOSLS00 TYPE TABLE OF s_/BIC/AZOSLS00,
wa_/BIC/AZOSLS00 TYPE s_/BIC/AZOSLS00.
SELECT
FISCPER
FISCVARNT
PLANT
STOR_LOC
/BIC/MATERIAL
VTYPE
BILL_QTY
     FROM /BIC/AZOSLS00 INTO TABLE it_/BIC/AZOSLS00
       FOR ALL
      ENTRIES IN RESULT_PACKAGE
       WHERE
below field is from value of fiscal period (which is fiscal period -999 ex: for 001.2014 this
value will be 002.2013 so 12 months including current period)
FISCPER >= RESULT_PACKAGE-/BIC/ZFISCPERF
below is result filed fiscal period (here i dont know which keyword or statement to be used to select
interval values this between statement giving syntax error that can not be used in where for for all entries
between RESULT_PACKAGE-FISCPER
        AND
         FISCVARNT = RESULT_PACKAGE-FISCVARNT AND
         PLANT = RESULT_PACKAGE-PLANT AND
         STOR_LOC = RESULT_PACKAGE-STOR_LOC and
      /BIC/MATERIAL = RESULT_PACKAGE-/BIC/MATERIAL .
    SORT it_/BIC/AZOSLS00 BY FISCPER FISCVARNT PLANT STOR_LOC
    /BIC/MATERIAL .
    LOOP AT RESULT_PACKAGE ASSIGNING <result_fields>.
      READ TABLE it_/BIC/AZOSLS00 INTO wa_/BIC/AZOSLS00 WITH KEY
below dont know what statement i need to use in read statement for interval of fiscal periods
giving error that >= can not be used
     FISCPER >= <result_fields>-/BIC/ZFISCPERF
FISCPER = <result_fields>-FISCPER
         FISCVARNT = <result_fields>-FISCVARNT
         PLANT = <result_fields>-PLANT
         STOR_LOC = <result_fields>-STOR_LOC
      /BIC/MATERIAL = <result_fields>-/BIC/MATERIAL
       BINARY SEARCH.
      BREAK-POINT.
      IF sy-subrc = 0.
below for each record there will be 12 records in read so sume of 12 records quantity i need to pass to result again dont know what to say here
sum statement giving error
            <result_fields>-/BIC/ZLSTSLS12 =
             sum(wa_/BIC/AZOSLS00-BILL_QTY).
          ENDIF.
    ENDLOOP.
friends please help me in this.
Thanks
Chandra.

Hiii,
If you only want to store last 12 months data in Target ODS .
Then Create filter in DTP and write routine in filter for calmonth or fiscal period.
Refer the below link to create filter routine :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80b2db87-639b-2e10-a8b9-c1ac0a44a7a6?QuickLink=index&…
Regards,
Akshay

Report for BOM materials

Dear Experts,
i have scenario which i need to capture but do not have any standard report and for that reason i am going in for Z development of the reports. please guide me so as to which field to be pulled to get the desired output.
Scenario:
We create Purchase order with a version control
1. First version has the data which act as baseline and we want to compare rest of the versions as variance
2. If the line item in PO is a subcontracting material with L- then the subcomponents will be present as a BOM
3. when i ammend the PO for the Qty the BOM items also get ammended but do not reflect in the version control - display changes
4. I want to capture the PO with each line item against which there is qty change and also the material BOM change due to qty change.
Is there any table from which i capture the data.
Pl. help me out it would be of great help
Thanks & Regards,
Farhan

Hi
the following tables might be useful
MAST
STKO - Header Table of BOM
STPO - Item Level for BOM
MAKT
regards
maniraj

Migo GR subcontracting 543 error quantity for BOM

Similar Messages

Maybe you are looking for