MIGO IN 2007 - MIRO in 2008 - WBS budget problem
Hi,
I have the folowin situation. GR was done on a PO with WBS using 2007's budget. A few days later invoice arrives (2008), MIRO is used but system displays error about WBS budget for 2008. Of course the invoice budget of the WBS is in 2007 not in 2008.
How can I fix this without posting the invoice in 2007, or reversing GR and rerunning it on 2008 ?.
Thanks in advance.
Nies
Hi,
I reconstruct : CJEN and then CJBN. and make sure that budget 2008 is allocated.
Thank you.
Best Regards,
Nies
Similar Messages
-
WBS budget functionality for Maintenance Order
Experts,
Can we use the Availability control functionality of WBS budget with Plant Maintenance orders? If yes what are the necessary config/settings required to do that?
Thanks
Arya
Edited by: Arya Singh on Sep 17, 2008 11:08 PMHello Arya,
For budget availability control to get activated against MO thru WBSE, you should create MO as a subnetwork of an activity in PS.
Please try following
1) Create a Project, WBSE, Network with one Internal activity. T-code CJ20N.
2) Assign Budget to the WBSE. T-code CJ30.
3) Assign Budget profile at Proj Def level. Choose activation type as 1 in profile.
4) In MO, in additonal data tab, enter the network and activity number. WBSE will be fetched automatically by the system.
5) For point 4 above do config setting @ T-code OPTP. Enter following in two columns
1) Network type Subntwrk = MO order type.
2) Ntwktype replaced act = PS network type.
6) Assign a component or raise service PR such that it exceeds budget. Sytem will throw an error for budget unavailability.
7) To check report S_alr_87013558 to know Budget/commitment/Assigned funds/Remaining budget.
Please post ur observations.
Thanks
Saikishore Ganga. -
I'm trying to remove Exchange 2007 from an SBS 2008 server
(Server 2008 Standard FE). My ultimate goal is to completely remove the SBS 2008 Server from the network environment.
We have an Exchange 2010 Coexistence Scenario and Mailboxes/Public Folders/etc have been moved over to the 2010 mail server, on Server 2008 R2.
I have moved all Shares, FSMO roles, DHCP, DNS, etc over to their respective servers. We have two full blown DC's in the environment.
I'm ready to remove Exchange 2007 from SBS 2008 and DCPROMO the server. I can NOT seem to find a TechNet article that shows me how
to proceed in this kind of scenario. I am trying to use the TechNet article:
http://technet.microsoft.com/en-us/library/dd728003(v=ws.10).aspx
This article references Disabling Mailboxes, Removing OAB, Removing Public Folder Databases, then uninstalling Exchange using the Setup Wizard.
When I go to Disable Mailboxes I get the following error:
Microsoft Exchange Error
Action 'Disable' could not be performed on object 'Username (edited)'.
Username (edited)
Failed
Error:
Object cannot be saved because its ExchangeVersion property is 0.10 (14.0.100.0), which is not supported by the current version 0.1 (8.0.535.0). You will need a later version of Exchange.
OK
I really don't see why I need to Disable Mailboxes, Remove OAB and Public Folder Databases since they have been moved to 2010. I just want
to remove Exchange 2007 and DCPROMO this server (actually I just want to remove any lingering Exchange AD Objects referring to the SBS 2008 Server, using the easiest and cleanest method possible).
Can someone point me in the right direction?
Thanks!Hi,
Based on your description, it seems that you are in a migration process (migrate SBS 2008 to Windows Server
2008 R2). Now, you want to remove Exchange Server and demote server. If anything I misunderstand, please don’t hesitate to let me know.
On current situation, please refer to following articles and check if can help you.
Transition
from Small Business Server to Standard Windows Server
Removing SBS 2008 –
Step 1: Exchange 2007
Removing SBS 2008 – Step 2:
ADCS
Removing
SBS 2008 – Step 3: remove from domain / DCPROMO
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Hope this helps.
Best regards,
Justin Gu -
I need the BADI or the way for WBS budget check at SC line item
Hi SRM folks,
Do you have any BADI or the good way to do the WBS budget check at SC line item level.
Donot suggest me the BBP_BUDGET_CHECK.ie for SC level only.
Is there any way to do at line item level.
Thanks in advance.
srini.Hi
Either use BBP_ITEM_CHECK_BADI or BBP_DOC_CHECK_BADI.
Note -> Please read the relevant standard SAP documentation provided in this case for using SE18 Transaction.
<b>Please go through the following pointers, which will definitely help -></b>
Re: Reg the budget check in Shopping cart
Re: Budget analysis
How to implement the badi BBP_DOC_CHECK_BADI??
Budget check for service PO
Budget Check error for Fixed Assets ? :-(
<u>Other related links -></u>
Budget Check
http://help.sap.com/saphelp_srm50/helpdata/en/4f/b3e739e62b714be10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/de/237440116fd279e10000000a114b1d/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/4e/1d74eff196d64e880fd28d41d4502b/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/5a/af5eff85d011d2b42d006094b92d37/frameset.htm
Do let me know as well.
Regards
- Atul -
Migrating from Outlook 2007 to Entourage 2008
15 days ago, I bought my first Mac after a 12-year gap. I have been trying to get my information from Outlook 2007 into Entourage 2008 without any luck. I've google'd and found that there are indirect paths only. (via mbox).
My E08 refuses to recognize the mbox files. After renaming my Inbox files as Inbox.mbox, they show up as E08 files (with the E08 icons). But I cannot open them in E08. When I go the File, Import method in E08, all mbox files are grayed out and I cannot select any of them.
I've installed Thunderbird on my Mac and got all the files into Thunderbird from my Win PC. Apple Mail crashes consistently when I try to import from Apple Mail.
Total file size is 5+ GB with 30 folders. Any ideas on what I may be doing wrong.Here is a long pending update on how I got my OL2007 data into E2008.
On the PC:
1. Setup Gmail Imap in OL2007. (I used my Gmail account for this purpose. Go into Gmail and search for "Outlook Imap setup")
ENSURE ENTOURAGE IS NOT RUNNING ON THE MAC.
2. Drag and drop each sub-folder from the Inbox into the Inbox of the Gmail Imap folder.
3. Depending on the size of the sub-folder and attachment, it makes take a few minutes to a couple of hours.
On the Mac:
4. Setup the Gmail Imap folders in Entourage too. (again refer Gmail help section).
SHUTDOWN OL2007 ON THE PC
5. Drag and drop the subfolder you created in step 2 onto your Entourage Inbox. (because this is a "download", it might work faster).
6. After step 5 is complete, quit Entourage.
7. Back to your PC, start OL2007.
8. Drag and drop the sub-folder from Gmail into the OL2007 Inbox. (this step is required if you want to preserve all the data on OL2007).
9. Repeat for other folders present on your OL2007.
This process is excruciatingly slow and painful, but it did get me all my data, attachments, preserved the links intact and organized it according to categories. For categories, ensure that you create the same categories as your OL2007 on E2008.
Good luck. -
Unrecognized certificate when Outlook 2010 tries to connect to Exchange 2007 on SBS 2008
Hi all,
I believe this is a security issue rather than a connectivity or configuration problem.
Running Outlook 2010 on Windows 7 trying to connect to Exchange 2007 on SBS 2008, I receive the following error:
"The name of the security certificate is invalid or does not match the name of the site"
When I view the certificate I see that it was issued to "zx-server" by "zx". This is NOT my domain CA nor is it a certificate I recognize. I use a self-issued certificate (i.e. issued by the SBS box). I also receive this certificate error when I browse to
the internal website (companyweb). No other computers on the network are seeing this behaviour.
I have checked the certificate stores in certmgr and I can't find any such certificate or CA. I have also searched the entire hard drive with no luck. I have run Kaspersky AV, Malwarebytes and MS Security Essentials several times but I can't find any malware.
I also recently installed Comodo Firewall (the problem began after this).
I need to find and remove the certificate and prevent it from being presented to me every time I try to connect to the server. All help, advice and suggestions appreciated.
AideHi,
It’s really a common issue.
This issue occurs if the following conditions are true:
You replace the default self-signed Exchange Server 2007 or Exchange Server 2010 certificate with a different certificate.
Note The Setup program in Exchange Server 2007 or in Exchange Server 2010 creates a default self-signed certificate when Exchange Server 2007 or Exchange Server 2010 is installed.
The common name on the replacement certificate does not match the fully qualified domain name (FQDN) of the URL that is stored in the following objects:
o
The Service Connection Point object for the Autodiscover service
o
The
InternalUrl attribute of Exchange 2007 Web Service (EWS)
o
The
InternalUrl attribute of the Offline Address Book Web service
o
The
InternalUrl attribute of the Exchange unified messaging (UM) Web service
By default, the URL that is stored in these objects references the NetBIOS name of the server. For example, a URL that resembles the
following URL is stored:
https://NetBIOS_name.contoso.com/autodiscover/autodiscover.xml
This may differ from the host name that is used in the FQDN of the replacement certificate. For example, the replacement certificate
may have an FQDN that resembles the following FQDN:
mail.contoso.com
This issue causes a name mismatch error to occur. Therefore, you receive the security warning message when you try to connect Outlook
2007 to the mailbox.
For more detailed information about the procedures to fix the issue, please refer to the following KB article:
Title: Security warning when you start Outlook 2007 and then connect to a mailbox
that is hosted on a server that is running Exchange Server 2007 or Exchange Server 2010: "The name of the security certificate is invalid or does not match the name of the site"
URL:
http://support.microsoft.com/kb/940726
Regards,
James
James Xiong
TechNet Community Support -
IIS SMTP instead of Exchange 2007 on SBS 2008
We have recently moved a client from Exchange 2007 on a 2008 Small Business Server over to Office 365. We would like to disable Exchange 2007 altogether in order to free up resources on an already overworked server. However, we have a couple of multifunction
devices that require an unauthenticated SMTP relay for email. I believe the easiest solution available to us is to enable SMTP in IIS and limit the relay to certain internal IPs. Assuming Exchange is fully disabled, would this be a viable solution? Given that
we are still running IIS internally, I would see this as a net gain in terms of system resources.It is not possible.
-
WBS budget updated in backend but not reflecting in SRM. What may be the reasons????
Pls suggest how to resolve???/
Thanks in advanceHI ,ParagMahajan :
Could you explain thow to use the WSB to check the budget in SRM ?
Alex -
I have a MacBook OSX 10.5.8 and a Time Capsule 500GB since July 2008. My problem is (for the 4th time in 4 yrs) the backup gets stuck in "preparing" indefinitely (hours). In the past, wile still under apple care warranty, tech support had me redo backup (loosing previous backups). Now I'm out of warranty and still having this problem. Any help is greatly appreciated.
I have a MacBook OSX 10.5.8 and a Time Capsule 500GB since July 2008. My problem is (for the 4th time in 4 yrs) the backup gets stuck in "preparing" indefinitely (hours). In the past, wile still under apple care warranty, tech support had me redo backup (loosing previous backups). Now I'm out of warranty and still having this problem. Any help is greatly appreciated.
-
Hi SAP Gurus,
I am MM guy and don't have PS knowledge.
When I am going to create PR system throwing error as "In document item 10 WBS element XXXXXXXXX
budget for the fiscal year 2009 was exceeded by XXXXXXXX.
When I see in the Tcode:CJ30 only Over all Budget is there.No annual budget assigned since 2007 to 2009.I am not able to assign value in the year 2009.It is under implementation and not completed.
Can you please tell the detailed steps how to assign budget in the year 2009 and also explain any config chnages needed if required.Hi,
What do you mean by Budget Under Implementation? In CJ30 , is it not allowing you to enter budget against 2009?
If so , go to OPS9 , check in relevant Budget Profile for Annual Values. If Annual Values is not ticked , it will not allow you to budget annually.
Regards, -
Public Folder Migration from Exchange 2007 to 2013 fails RelinquishedWlmStall budget limitations
I have been trying to migrate approx 50 public folders from Exchange 2007 to Exchange 2013 for several months. I have followed every link I can find on how to do the migration properly. It will stay in a queued state for hours until the MRS is
restarted. It will then start copying messages. After reaching 28% I get RelinquishedWlmStall as Status Detail. Running the Get-PublicFolderMigrationRequestStatistics -IncludeReport | fl command I get the following: (truncated)
Status : InProgress
FailureTimestamp :
IsValid : True
ValidationMessage :
OrganizationId :
RequestGuid : ff4af794-f31e-4334-959f-7d6c4ccbe310
RequestQueue : PublicFolders
ExchangeGuid : b12c1f83-c4ae-46bb-a26a-0422d90800e4
Identity : eddf983d-5827-4a2a-98ef-820321ebebd0\ff4af794-f31e-4334-959f-7d6c4ccbe310
DiagnosticInfo :
Report
4/23/2015 8:49:37 AM [pionexxxx] Request processing started.
4/23/2015 8:49:37 AM [pionexxxxx] Cleared sync state for request
00000000-0000-0000-0000-000000000000 due to 'CleanupOrphanedMailbox'.
4/23/2015 8:49:38 AM [pionexxxxxx] Stage: CreatingFolderHierarchy. Percent complete:
10.
4/23/2015 8:49:38 AM [pionexxxxxx] Initializing folder hierarchy from mailbox '': 50
folders total.
4/23/2015 8:49:38 AM [pionexxxx] Folder creation progress: 0 folders created in
mailbox 'b12c1f83-c4ae-46bb-a26a-0422d90800e4'.
4/23/2015 8:49:38 AM [pionexxxxx] Warning: Failed to find or link recipient object
'FF-D5-EF-1A-0A-95-D7-4B-89-02-A6-9E-DA-4D-23-4B' in active directory for mail
enabled public folder 'Public Root/IPM_SUBTREE/AccountingFaxes' with EntryId '00-00
00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-3B-C3-C1-30-22-E0-BE-4E
98-03-B9-14-4F-B4-12-C1-00-00-00-0F-C3-4C-00-00'. This folder can be linked
manually by running Enable-MailPublicFolder cmdlet after the migration completes.
4/23/2015 8:49:39 AM [pionexxxx] Warning: Failed to find or link recipient object
'D8-46-09-BE-0B-3D-6E-4A-95-10-8F-C5-AA-0B-88-50' in active directory for mail
enabled public folder 'Public Root/IPM_SUBTREE/AccountingFaxes/CashRec/Inventory'
with EntryId '00-00-00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-3B-
3-C1-30-22-E0-BE-4E-98-03-B9-14-4F-B4-12-C1-00-00-00-12-6A-F5-00-00'. This folder
can be linked manually by running Enable-MailPublicFolder cmdlet after the
migration completes.
4/23/2015 8:49:39 AM [pionexxxx] Warning: Failed to find or link recipient object
'A6-12-DA-05-7D-21-DE-44-90-61-64-23-8C-62-41-F4' in active directory for mail
enabled public folder 'Public Root/IPM_SUBTREE/AccountingFaxes/CashRec/Ulysses'
with EntryId '00-00-00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-3B-
3-C1-30-22-E0-BE-4E-98-03-B9-14-4F-B4-12-C1-00-00-00-0F-C3-7C-00-00'. This folder
can be linked manually by running Enable-MailPublicFolder cmdlet after the
migration completes.
4/23/2015 8:49:40 AM [pionexxxx] Warning: Failed to find or link recipient object
'96-76-90-F1-A5-B7-DB-41-A7-A3-D6-8D-86-AE-45-A5' in active directory for mail
enabled public folder 'Public Root/IPM_SUBTREE/CSR Schedule' with EntryId '00-00-00
00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-3B-C3-C1-30-22-E0-BE-4E-98
03-B9-14-4F-B4-12-C1-00-00-00-0E-34-FF-00-00'. This folder can be linked manually
by running Enable-MailPublicFolder cmdlet after the migration completes.
4/23/2015 8:49:40 AM [pionexxxx] Warning: Failed to find or link recipient object
'82-72-47-AA-D7-68-85-4C-91-92-41-45-8A-20-EA-6D' in active directory for mail
enabled public folder 'Public Root/IPM_SUBTREE/DC 24 Hr Schedule' with EntryId '00-
0-00-00-1A-44-73-90-AA-66-11-CD-9B-C8-00-AA-00-2F-C4-5A-03-00-85-62-89-2A-52-C3-92-
5-93-F8-5A-6F-56-5D-D1-D4-00-00-00-00-27-37-00-00'. This folder can be linked
manually by running Enable-MailPublicFolder cmdlet after the migration completes.
4/23/2015 8:49:41 AM [pionexxxx] Folder hierarchy initialized for mailbox
'b12c1f83-c4ae-46bb-a26a-0422d90800e4': 46 folders created.
4/23/2015 8:49:41 AM [pionexxxx] Stage: CreatingInitialSyncCheckpoint. Percent
complete: 15.
4/23/2015 8:49:41 AM [pionexxxx] Initial sync checkpoint progress: 0/50 folders
processed. Currently processing mailbox 'b12c1f83-c4ae-46bb-a26a-0422d90800e4'.
4/23/2015 8:49:42 AM [pionexxxx] Initial sync checkpoint completed: 46 folders
processed.
4/23/2015 8:49:42 AM [pionexxxx] Stage: LoadingMessages. Percent complete: 20.
4/23/2015 8:49:43 AM [pionexxxx] Messages have been enumerated successfully. 40607
items loaded. Total size: 149 MB (156,253,810 bytes).
4/23/2015 8:49:43 AM [pionexxxx] Stage: CopyingMessages. Percent complete: 25.
4/23/2015 8:49:43 AM [pionexxxx] Copy progress: 0/40607 messages, 0 B (0
bytes)/149 MB (156,253,810 bytes), 11/50 folders completed.
4/23/2015 9:04:37 AM [pionexxxx] Stage: CopyingMessages. Percent complete: 28.
4/23/2015 9:04:37 AM [pionexxxxx] Copy progress: 3660/40607 messages, 7.015 MB
(7,355,409 bytes)/149 MB (156,253,810 bytes), 11/50 folders completed.
4/23/2015 9:04:37 AM [pionexxxx] Relinquishing job because of large delays due to
unfavorable server health or budget limitations.
ItemsTransferred : 3660
PercentComplete : 25
4/23/2015 9:04:37 AM [pionexxxx] Relinquishing job because of large delays due to
unfavorable server health or budget limitations.
It never tries to restart. Can anyone please help? The server checks for health all come back ok. I will be more than glad to include further information.Hi,
Basic on the error message, I notice that public folder migrate slow and display that “Relinquishing job because of large delays due to unfavorable server health or budget limitations” .
If I misunderstand your concern, please do not hesitate to let me know.
Since it is just slow and not failing, please do not stop the batch, it might connect to another server for sync.
Meanwhile, please refer to below link so that get details about Exchange Online migration performance and best practices:
https://technet.microsoft.com/library/dn592150(v=exchg.150).aspx
If the issue persists, please collect the relevant migration report for further troubleshooting.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support -
Asset a/c entry at the time of MIGO instead of MIRO
Hi
currently we are posting asset accouting entry at the time of MIRO i.e. asset Dr and vendor Cr.
Now we want asset should debited at the time of MIGO.
we have change the setting in MM-account assingment but still we are not getting the desire result. can anybody let us know how we can achieve the same.
please reply
RegardsHi
Thanks...that is there but still not getting result.
regards
DD -
WBS budget reduction at the time of PO creation
Hi,
1. When a PO is created against a WBS element, at this point is there any budget check? If so is it against RELEASED budget or TOTAL BUDGET.
2. If at the time of PO creation the budget check is against TOTAL, does the system check at the time of invoice posting against RELEASED?
I have the following scenario in PRODUCTION.
WBS TOTAL budget - 200,000
WBS RELEASED budget - 100,000
System is allowing to post POs and INVOICES fro Rs.180,000 (more than RELEASED). WBS availability check is active.
Any idea why system is allowing to post both PO and INVOICES more than released??
Regards
PrajithHi,
The budget is checked against the assigned values.
The assigned value for projects is calculated from:
1. Actual costs on the budget carrying WBS element
2. Statistical actual costs on the budget carrying WBS element
3. Actual costs from lower-level WBS elements, if these do not have any budget
4. Statistical actual costs from lower-level WBS elements, if these do not have any budget
5. Commitments on the budget carrying WBS element
6. Commitments from lower-level WBS elements, if these do not have any budget.
7. Maximum from plan and actual costs + commitments from assigned networks or orders
To know more about the assigned values: Go to CJ30 enter in the budget distribution screen then Extras->Availability control>analysis.
Also check the transaction group in tolerence limit in SPRO
For more details please refer the following note: 178837.
hope its useful.
Reward points if useful.
Thanks.. -
Problem in Exporting to Excel 2007 using CRServer 2008
Can anyone please help me know the difference between Crystal Reports Server 2008 and Business Objects XI R2? Both the support guides says that it supports Office 2007. I have a problem in exporting the reports to Excel 2007 .I have downloaded the trial version of Crystal Reports Server 2008 but still unable to view my complete reports in Excel 2007 through infoview because few of my report's colums are truncated and it still exports in Excel 2003.I have LiveOfficeXIR2_SP4 and Office 2007 installed. Is it so that i have to switch over to Business Objects XI R2 or any other to solve my problem instead of using Crystal Reports Server 2008 or is it the problem with the version of my Live office.Pls help me regarding this..
Babita.Hi Ani,
First Thank you for your reply..I have already tried exporting it in Excel 2003 but since the limit is upto 256 columns and that my report's content exceeds this limit, few of the columns are truncated. Thats why i thought that it would be better to export it in Excel 2007. But i could'nt find any way to do it so..Pls help me if there is any other way..
Babita. -
Hello everyone,
This is my first post on Business Objects forum...
I would like to know if there is a way to use CR2008 in Delphi 2007.
I have read that the RDC is not available for CR2008 but only for the XI release 2.
Thanks in advance for your reply...That's correct RDC was deprecated with XI Release 2, and is not included with CR 2008.
RDC remains supported for use with XI Release 2.
Sincerely,
Ted Ueda
Maybe you are looking for
-
I found a solution in one of Apple forums. I will copy her post: " I was checking the differences between my normal admin User account/Library/Application Support/Adobe/Lightroom contents and the one on the clean other admin User folder in the same
-
I have ios 7 and lately when i go to settings-cellular and try to turn off cellular data for some apps it doesnt work. As i turn off cellular data for one app immideately after i exit settings and re-enter settings cellular data for that same app goe
-
IPhone doesn't appear in iPhoto - unable to import
I am unable to import photos from my iPhone 3G into iPhoto 8 (v7.1.5). The iPhone does not appear in the left pane, and no idea why? Anny suggestions?
-
How to revert the plan copy done via CJ9F
Hi Folks, Here is the scenario: No budgeting is used in PS ie. no budget profile is assigned to projects. Initially we are planning cost and revenue for the project and coping these plan value in version "02 : Project Baseline Budget" made for storin
-
When I try to install v10.6 of iTunes for Win7, the installation is almost complete when I get an error "An error occured while attempting to create the directory: C/\ProgramData\Microsoft\Windows\Start Menu" I already have this folder installed with