Migo info message

Dear All,
I am doing STO of excisable finished material from excisable plant to excisable plant.process followed:
STO -
delivery (SD route)-Proforma excise billing- J1IIN -( supplying plant)
MIGO (At receiveing Plant)
Here, before  saving  migo document, we are getting  info message as "Document flow for delivery cannot be updated" ' When you post this goods movement, the document flow is not updated in the delivery"
This is happening after patch updation else it used to give message as "document is ok"
How to rectify  the same.
thnaks
Shankar

Hi,
Use T.code SE12Give the table name-Select utilities from menu bar-table contentscreate entries-enter your company codesave.
Post the data again.It should save your problem
Regards
A

Similar Messages

  • HT1277 How do I make Mail remove junk/deleted messages from the server? The only option tht works for me now is the "Remove from server" button at Account Info Messages on server.

    How do I make Mail remove junk/deleted messages from the server? The only option tht works for me now is the "Remove from server" button at Account Info > Messages on server. What am I doing wrong?

    Mail > Preferences… > Accounts > Advanced > Remove copy from server after retrieving a message

  • How to lose( info message service)

    i have a nokia 2220 slider.every day it beeps about twenty or thirty times, the message it displays is.
    check info service. i havnt' got a clue how to do it ,any help would be welcome.

    Check your Message settings. Info messages will somewhere there. Turn it to Off

  • INFO MESSAGE in USER-EXIT

    Hello Friends,
           I am trying to give information message in User exit while creating PO
           Is it possible to give message type ' I '  ???
           If not how to give info message on to ME21N ??
    Thanks,
    Ajay

    I'm not sure why that should be. Perhaps as gudise mahesh  says it will not trigger in update mode? My code is straightforward and it does work. It outputs a message type i if the last person to amend a po tries to release it.
    IF sy-ucomm = 'MERELEASE' AND
       sy-repid = 'SAPLXM06'.
      CLEAR wa_bekpo.   
      READ TABLE it_bekpo INTO wa_bekpo INDEX 1.
      SELECT SINGLE ernam FROM ekko INTO l_uname
          WHERE ebeln = wa_bekpo-ebeln.
      IF l_uname = sy-uname.
        e_cekko-ekorg = space.
        MESSAGE i076(zmm).
        LEAVE TO TRANSACTION sy-tcode.
      ENDIF.
    Exclude last person to change PO   
      SELECT * FROM cdhdr   
        INTO CORRESPONDING FIELDS OF TABLE it_cdhdr   
        WHERE objectclas = c_class       
          AND objectid   = wa_bekpo-ebeln    
          AND change_ind  NE c_i.   
      IF NOT it_cdhdr IS INITIAL.  
        SORT it_cdhdr BY udate DESCENDING utime DESCENDING.
        READ TABLE it_cdhdr INDEX 1 ASSIGNING <cdhdr>.  
        IF <cdhdr>-username = sy-uname.   
          e_cekko-ekorg = space.  
          MESSAGE i089(zmm).    
          LEAVE TO TRANSACTION sy-tcode. 
        ENDIF.      
      ENDIF.
    ENDIF.
    Sorry I couldn't be of much help.

  • Converting info message into error message hardcoded in a standard program.

    Hi all,
    Due to some Good Manufacturing Practices in the Pharmaceutical Industry, users are demanding that message i102(40) (SAPLCOSD / LCOSDF2D / FORM OrderTables_Fill line 478) a hardcoded info message be converted into an error message.
    I have struggled all day long on the PPCO exits, but it was not possible to find one that comes prior to this message, so I could prevent the error.
    I then tried to create a field exit on field CAUFVD-GSTRP, but it was not possible to create a field exit for this field (it was not present at PRFB).
    Is there any other way of changing it without changing the standard code (even though it's just one caracter from i102(40) to e102(40).
    Many thanks in advance,
    Alberto

    Hello.
    There is a solution which we used in one of our requirement.
    To replace standard sap code, in ECC 6 SAP provided Enhancement Sections.
    Step 1: Give program name and from and to line numbers in which you need to create a Enhancement section. Give this details to BASIS. They will provide you access key.
    Step 2: Create a Enhancement Section for this portion of code.
    Step 3: Create implementation for this enhancement section.
    You can't create multiple implementations for enhancement section.
    Activate it and now your new code will be executed.
    [Click here |http://help.sap.com/saphelp_nw70/helpdata/en/a0/47e94086087e7fe10000000a1550b0/content.htm]to read the same in help.sap.com.
    all the very best to you.

  • Customized Error/Info  Messages in ADF FACES Pages

    hi every one...
    I need to display customized eerror/info messages in a ADF Faces application.
    How can i use adf:message componenet to do this...

    Hi,
    af:messages show all messages added to the JSF message stack
    FacesContext fctx = FacesContext.getCurrenInstance();
    fctx.addMessage("Some Name Strinng here", new FacesMessage(FacesMessage.SEVERITY_ERROR, "Your error message here",null));
    If <"Some Name Strinng here"> is the id of a component then the error message is also shown below this component
    For customizing error messages - e.g. translating Exceptions into useful user information, see SRDemo, which can be downloaded and installed through JDeveloper Help-->Check for Updates.
    Frank

  • Adobeform opens info message"enable usage rights" and form is in uneditable

    Hi,
    When I try to launch the form using wd abap application / or execute the form from SFP setting : fillable and dynamic parameters to true, i get this information message '
    This document contained certain rights to enable special features in Adobe reader . The document has been changed since
    it was created and these rights are no longer valid . Please contact the author for the original version of this document "
    Did any one get such message and click on 'ok', it makes the form in display mode and becomes uneditable.
    When I try to open the form even in offline, it pops up the same message and the form becomes uneditable.
    Not sure whether this is related to which settings.  I have uninstalled sap gui, adobe live cycle designer and as well the explorer.
    But no clue.
    Any thoughts would really help.
    Thanks,
    Saujanya
    Edited by: Saujanya on Jul 28, 2010 7:32 PM
    Edited by: Saujanya on Jul 28, 2010 7:33 PM

    Hi,
    I am also getting the same info message, when I try to launch the forms in employee related services in HR administrator and the form fields are not editable. 
    Info message:
    "This document contained certain rights to enable special features in Adobe reader.  The document has been changed since
    it was created and these rights are no longer valid . Please contact the author for the original version of this documentu201D
    I have checked Reader rights validity in Visual admin, It is valid up to 2023
    We are using adobe reader 8.0
    Kindly provide the inputs to resolve this issue.
    Thanks and Regards,
    Vasu

  • Info message: GT_LINES_VAL-VALUE(15) ECC6 PA LSMW on KE21N

    Hi Experts
    I have searched the SAP notes as well as the forum.
    I have created a LSMW recording to capture hundreds of entries using KE21N.  I recorded it with all the required characteristics which the systems called  GT_LINES(01),(02),(03) ETC. which I have establish which they are.
    It is the value fields that are giving this information message for most, not all the value fields and I have to press enter through them all (49).
    I have completed each value field as follows:
    Field name:   GT_LINES_VAL_VALUE(05)       (Greyed out)
    Name:           GT_LINES_VAL_VALUE05          Field name copied and brackets taken out
    Name:           Revenue
    Default value:    ' '
    Question: Will this information message hinder the LSMW from running after completion of it, or do you know how to solve it please?
    Your advice is very welcome
    Kind regards
    Dawn

    Hi
    This is resolved.  I had taken my previous recorded LSMW and re-recorded it with more value fields.  Due the 'old' fields being mapped already, I first set them back to initial and then went back to the recording and when I saved, it no longer gave the info message.
    Thank you
    Kind regards
    Dawn

  • I need to get the info Message generated by the Called Program

    Hi All,
    I am calling an standard SAP program from my own program as follows:
        SUBMIT RFBIBL00 WITH DS_NAME = V_FILE
                        WITH CALLMODE = 'C'
                        with max_comm = '1000'
                        with xinf = 'X'
                        AND RETURN.
    As soon as the called program parks invoice and finish execution, it generates an info message at the status bar but I can't capture this message which contains the newly created invoice No.
    I have tried to call the above program with xlog = 'X' option which prints the info messages as a log report after the programs finishes, but I am still not able to capture that log as well, although I have tried with the EXPORTING LIST TO MEMORY option while submitting the program but it just prints the log as report without sending it to memory.
    Please let me know if there is some way to do it.
    Regards,

    Hi Athar,
    1. MESSAGES cannot be CAPTURED
       using submit
    2. For that CALL Transaction
                MESSAGES Into Itab
       is required.
    3. For your requirement,
       make a new TCODE for this program
       eg. ZR0   (ZR zero)
    4. Fill the bdc table
    5. use this code (just copy paste)
       make modifiction as per ur requirement.
    6.
    REPORT abc.
    DATA
    DATA:   bdcdata LIKE bdcdata    OCCURS 0 WITH HEADER LINE.
    DATA:   messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
    DATA: l_mstring(480).
    TABLES : t100.
    FILL DATA
    PERFORM bdcfill USING :
    'X' 'RFBIBL00' '1000'
    , '' 'CALLMODE' 'C'
    , '' 'XLOG' 'X'
    , '' 'BDC_OKCODE' '=ONLI'
    TRANSACTION
    CALL TRANSACTION 'ZR0'
    USING bdcdata
    MODE 'N'
    MESSAGES INTO messtab.
    PERFORM showmsg.
    BDC FORM
    FORM showmsg.
    MESSAGES
      LOOP AT messtab.
        SELECT SINGLE * FROM t100 WHERE sprsl = messtab-msgspra
                                  AND   arbgb = messtab-msgid
                                  AND   msgnr = messtab-msgnr.
        IF sy-subrc = 0.
          l_mstring = t100-text.
          IF l_mstring CS '&1'.
            REPLACE '&1' WITH messtab-msgv1 INTO l_mstring.
            REPLACE '&2' WITH messtab-msgv2 INTO l_mstring.
            REPLACE '&3' WITH messtab-msgv3 INTO l_mstring.
            REPLACE '&4' WITH messtab-msgv4 INTO l_mstring.
          ELSE.
            REPLACE '&' WITH messtab-msgv1 INTO l_mstring.
            REPLACE '&' WITH messtab-msgv2 INTO l_mstring.
            REPLACE '&' WITH messtab-msgv3 INTO l_mstring.
            REPLACE '&' WITH messtab-msgv4 INTO l_mstring.
          ENDIF.
          CONDENSE l_mstring.
          WRITE: / messtab-msgtyp, l_mstring.
        ENDIF.
      ENDLOOP.
    ENDFORM.                    "SHOWMSG
    BDC FORM
    FORM bdcfill USING a b c.
      CLEAR bdcdata.
      IF a = 'X'.
        bdcdata-program = b.
        bdcdata-dynpro = c.
        bdcdata-dynbegin  = 'X'.
      ELSE.
        bdcdata-fnam = b.
        bdcdata-fval = c.
      ENDIF.
      APPEND bdcdata.
    ENDFORM.                    "bdcfill
    I hope it helps.
    regards,
    amit m.

  • Remove the info message "Customizing missing: No code for category"

    Hi Experts,
                  I am getting the information message i.e "Customizing missing: No code for category" while entering into the repair web ui screen in service. I want to remove this information message. Please suggest me how to avoid this info. message. Thank you in advance.
    Regards,
    Santhosh

    I installed this VB script and still get the same error message. I have also installed all the install scripts from InstallShield. I sent an email to InstallShield a week ago explaining my problem but have had no reply. Their Website says to contact the software vendor directly - that would be Apple. I have an Apple 800 number but have never been able to get through. I have installed other Windows software in the last week and have not had a problem. Any more suggestions?
    Home built Windows XP Pro
    Home built Windows XP Pro

  • Writing Info Messages to Workflow Protocoll

    Does anybody know how info messages can be written to workflow protocolls within a BOR object method??
    Thanks for your help!
    MArtin

    I think we are talking about a BPEL catch here, not a java catch.
    The exception (SQLException) will be returned by the DB adapter to the BPEL engine as a fault (probably a RemoteFault, but you can check in the audit).
    You should catch the RemoteFault (this is a system fault). In a catch, you can specify a faultvariable of type RuntimeFaultMessage (defined in RuntimeFault.wsdl, in system/xmllib directory).
    This faultvariable will then contain all the error details, so you can process it further in the catch branch.

  • Avoid Info messages from Acrobat when open broken PDF document

    I'm using Adobe SDK to check and fix a bunch of PDF files
    Dim avDoc As AcroAVDoc = Nothing
        Dim pdDoc As CAcroPDDoc = Nothing
        Try
            avDoc = New AcroAVDoc()
            If (avDoc.Open(sourceFile.FullName, String.Empty)) Then
                pdDoc = avDoc.GetPDDoc()
                RemoveIfExists(destinationFile)
                CreateIfNotExits(New DirectoryInfo(destinationFile.DirectoryName))
                pdDoc.Save(3, destinationFile.FullName)
                pdDoc.Close()
                avDoc.Close(1)
                Return True
            End If
            Return False
        Catch generatedExceptionName As Exception
            Me.logger.Error(String.Format("Error while converting {0} to {1}. The error message: {2}", sourceFile.FullName, destinationFile.FullName, generatedExceptionName.Message))
            Me.logger.Fatal(generatedExceptionName.StackTrace)
            Return False
        Finally
            If (avDoc IsNot Nothing) Then
                avDoc.Close(1)
            End If
            If (pdDoc IsNot Nothing) Then
                pdDoc.Close()
            End If
        End Try
    But when I try to open PDF that can't be opened for some reason the info message appeares
    How to avoid this?

    Open the document first as a PDDoc, then convert to an AVDoc. Use an error
    handler to catch the error that gets thrown by the Open call when the file
    cannot be opened.
    pdDoc.Open("c:\test\dummy.pdf")
    pdDoc.OpenAVDoc ("")
    Karl Heinz Kremer
    PDF Acrobatics Without a Net
    PDF Software Development, Training and More...
    [email protected]
    http://www.khkonsulting.com

  • Popup box similar to INfo message

    Hi,
    I need a Function module, which gives you a pop-up box similar to the Information message.
    Thanks in Advance.

    hi,
    Try using Function module POPUP_DISPLAY_MESSAGE.
    Sample code is given below :
    call function 'POPUP_DISPLAY_MESSAGE'
      exporting
        titel = 'This is a popup info message'
        msgid = '00'
        msgty = 'I'
        msgno = '001'
        msgv1 = 'Message Variable 1'
        msgv2 = 'Message Variable 2'
        msgv3 = 'Message Variable 3'
        msgv4 = 'Message Variable 4'.
    *Reward points if it helps you

  • Cannot post Goods receipt in MIGO Error message"Field Business Area requird

    Hai
    I am posting Goods Receipt ( MIGO) with Reference to Purchase Order its having 47 Line item material. When i will doing Goods Receipt with rreference to po number its triggered error message in :Message No F5808 Field business Area is a Required  field for G/L account 1180 300000 . for only particular line item 47 material shown error..
    i checked all the settings in MM Automatic determination And G/L element, field variants, posting keys.. but everything configured profer settings..why particulat materail it shown error? how to resolve this error?

    Hi Thiru,
    A somewhat late aswer, but it might be helpfull for other users with the same problem. You can solve this problem by assigning the division/valuation area to the business area. Follow the path below to execute this:
    SPRO - enterprise controlling - Consolidation - Integration: preparation for consolidation - Preparation in the sender system - Further settings for Business Area Consolidation - Materials Management - Assign Division/Valuation Area to Business area.
    Under Enterprise structure -  Assignment - Logistics General, you will find a similar function. First execute option 1 or 2 here and then execute option 3. This makes it work as well, exept that it will not be recorded in a proper transport. The first option I gave for assigning is properly transportable.
    Greetings,
    Sjaak van den Berg
    Magnus Technology Consultants
    Edited by: S. van den Berg on Aug 14, 2009 1:09 PM
    Edited by: S. van den Berg on Aug 14, 2009 1:10 PM

  • Any way to import entourage 2004 info (messages and addresses) into Mail - after installing Lion?

    I have just installed Lion - Entourage 2004 nop longer works (ok, I should have checked!). Does anyone know if I can set up Mail to import all my Entourage info (account details, emails and addresses)?

    The thing is, sometimes when I send PDFs it's fine, and sometimes she gets it and it's a jpeg and embedded ... not consistent at all ... I didn't assume for sure it was on my end, but without sitting at her computer and looking at Outlook, which I'll do the next time we meet, it's hard to know what's going on.
    I do know that sometimes when I attach a PDF, the whole thing shows up in the body of the email (like it's embedded), and sometimes it's just a PDF icon attachment, and so I know that's something happening on my end before I even send the file, but can't for the life of me figure out what.
    I like Mail a lot. But it does lack features that Outlook and Entourage have that I like. For instance being able to send an attachment to the main recipient only, and not the CCs and BCCs, which I used to so that a client knew I was sending the final high-res file to a printer, without having to send it to them. And I never had attachment problems when I used those programs, but maybe that's simply a function of using PC to PC programs.
    Message was edited by: GGPP

Maybe you are looking for