MIGO is not possible for refurbishment order

I have generated a Purchase requisition for a non stock material through refurbishment order(PM04) Plant Maintenance. Later PR is converted into PO further we are unable to do MIGO as it is giving a error "MIGO is not possible for refurbishment order". Plz help me in solving this issue.
Guruprasad.KS

Dear Guru
U can do the goods receipt against the Refurbish order like others. What ever u are created the PR thro PM it is Non stock as a standard.
After goods receipt this will go to order thro 101 movement (with out enetring into inventory at stores) . It means that directly consumed at order level.
There is no possible at facing the error at migo level. check your movement types 101 only
Thenna

Similar Messages

Order settlement not possible for investment order.

Dear All
We are doing the settlement for the order. settlement recever is order & we are getting the following error.
Account 320501 requires assignment to CO object.
Please guide me.
Regards

Dear Pete
The message is as follows. Message class KI & number 235.
Text
Account & requires an assignment to a CO object
Diagnosis
You have not defined a CO account assignment for an account that is relevant to cost accounting.
System Response
Account is defined as a cost element.
This means that you must always specify a CO account assignment.
Procedure
Enter one of the following CO account assignments
Order
Cost center / cost center/ activity type
Sales order item (for a project or cost relevant)
Project / WBS element
Cost object (Process manufacturing)
Network/ Network activities
Business process
Profitability segment
Real estate object
The posting row affected is , account .

WIP FI entry not reversed for refurbishment order

Hi Experts,
I have run the WIP and settled the order in July month for one refurb order and the accounting entry is generated, the order status was REL at that time, now in the month of august the GR is done done for the order and the status is DLV, TECO.
In august month when i try to settled the order( not runed KKS2) the WIP entry is not getting reversed.I have done all the WIP settings and in OKGC also the the WIP cancellation if it is DLV and TECO is available for my controlling area.
Could you please advice me what would be the reason for this.
Regards
SB

Ajay,
I donu2019t see test run tab in KKA1, when I executed KKA1 by selecting full log I got the analysis screen and saved.
July u2013 executed KKA1 saved and did settlement Ko88 u2013 WIP FI entry generated
August- Order TECOed and did the settlement Ko88 u2013 FI entry generated but WIP entry was not reversed. Is this because of not running KKS2 in August?
I reversed the settlement in August and did variance calculation and did settlement, even though the WIP entry is not reversed.
Thanks,
SB

Goods receipt not possible for delivery 80016425: error code 4 in MIGO

Hi friends,
I created STO from ME21N tr.code(document type:UB), then I created outbound delivery from VL10B tr.code based on STO.
After that, goods issue is made by vl02n.Lastly , when I want to make a goods receipt based on outbound delivery from MIGO
(with mvmt type:101),it gives me error about"Goods receipt not possible for delivery 80016425: error code 4 in MIGO tr.code" .
Take your opinions

Hi,
Error 4 indicates there is/are no delivery item/items.
Check following options:
option-1--->Check material number extended to the both plants with storage locations
option-2--->Check the material received already WRT the delivery
option-3---> Check confirmation control key in material that needed in creation of an inbound delivery to have GR process
option-4--->Check The latest goods receipt date in STO
option-5--->Check(done any setting) if any billing to be done after PGI and then can do GR WRT delivery
Regards,
Biju K

Sales order creation is not possible for this notification type

Hello,
I want to create Sales Order through following menu:
Notification -- Functions - Sales order - CreateSelection of Order Type.
But I get following message:
'Sales order creation is not possible for this notification type'
The message says: No sales order type is assigned to the notification type.
But I did not find any such configuration where I can assign notification type to Sales Order document type.
Please help.
regards

Transaction OIM9
Menu Path
Customizing > Plant Maintenance and Customer Service > Maintenance and Service Processing > Maintenance and Service Notifications > Notification Creation > Notification Types > Define Order Types and Special Notification Parameters
Nomally CS (customer service) area use this function.
Regards
Luke

Goods receipt not possible for delivery 80172554: error code 8

Hi all,
I got this error but the description does not helps to understand the issue.
Goods receipt not possible for delivery 80172554: error code 8
Message no. M7865
Diagnosis
The goods receipt for the delivery cannot be posted.
The error according to the error code:
1. The delivery does not exist.
2. The delivery type is unknown.
3. The delivery is not goods issue posted.
4. There are no delivery items.
5. The receiving plant could not be determined.
6. The delivery items have already been goods receipt posted or contain zero quantities.
7. Goods receipt(effect)movement type to goods issue movement type could not be determined.
8. It is not currently possible to block the delivery.
Procedure
Error code 1      : Check your entry.
Error code 2,3,4,6: Check the delivery and its document flow.
Error code 5      : The delivery must be related to a purchase order or
                    the customer must be a retail business.
Error code 7      : Check the settins for your movement types.
CD

Please check this answered link:
Re: MIGO
Re: Inter comapny PO-
Goods receipt not possible for delivery 800015869: error code 1
STO Problem while doing GR against outbound delivery
Edited by: Afshad Irani on Jun 2, 2010 7:13 PM

Goods receipt not possible for delivery 800015869: error code 1

Dear friends,
I am doing MIGO-GR for outbound delivery, but getting error once inputting outbound delivery no.
Goods receipt not possible for delivery 800015869: error code 1
Message no. M7865
Diagnosis
The goods receipt for the delivery cannot be posted.
The error according to the error code:
1. The delivery does not exist.
2. The delivery type is unknown.
3. The delivery is not goods issue posted.
4. There are no delivery items.
5. The receiving plant could not be determined.
6. The delivery items have already been goods receipt posted or contain zero quantities.
7. Goods receipt(effect)movement type to goods issue movement type could not be determined.
8. It is not currently possible to block the delivery.
Procedure
Error code 1      : Check your entry.
Error code 2,3,4,6: Check the delivery and its document flow.
Error code 5      : The delivery must be related to a purchase order or
                    the customer must be a retail business.
Error code 7      : Check the settins for your movement types.
Any poniters to check the setting in PO or delivery or any setting in SPRO.
Regards
Ashutosh

Hi Anupam,
That is the requirement of my scenario
That is happening in intercompany posting.
I am explaining to you.
say total stock for article AR is 1000 ( In DC --A it is 500 and in store B it is 500)
I have two company codes X and Y
One DC (A) belongs to X and second store (B) belongs to Y.
I have stock available for say article ( am working here in IS Retail instead of material ) in both DC --A and Store --B.
Now I have created PO thru replenishment planning WRP1 , now in PO supplying plant is DC.
Now I did delivery thru VL10B and then picking and then PGI.
Now my stock is reduced in DC by PO quantity created.( let us assume it is 100)
So now total stock in DC=400
Now this stock is in transit we can check thru MB5T. so total stock in transit = 100
Now I have to do GR against delivery , if I will do GR for 100 nos , there will be no stock in transit
and stock of receivibg store (B) will increase by 100 nos.
But I am not able to do GR against delivery so I did GR against PO for say 50 nos. In this case stock in store is increase by 50 nos.
But there is another stock in transit available=50
Now why GR is not happening against delivery but it is happening against PO???
Any pointers

Error - E 036 No goods receipt possible for purchase order

Good Day,
Am not able to do the Goods Receipt through BAPI : BAPI_GOODSMVT_CREATE.But am able to create GR through MIGO.Am getting the below error through BAPI:
E 036 No goods receipt possible for purchase order 4500000563 0010.
I gone throug the SDN, but i count not found any solution for this. Please help me in this regard.
Cheers,
sravan

Hi,
Maybe this example can help you.
http://www.sap-img.com/abap/bapi-goodsmvt-create-to-post-goods-movement.htm
Regards,
Harish

No goods receipt possible for purchase order message number# M7036

Hello,
We are working in 4.7C , Created the scheduling agreements, with Shipping notification(Inbound delivery) .
Created the Scheduling agreement on 25.09.2009 and created the schedule line one same day with date 25.09.2009, (time column Blank).
So in Practice for Goods receipt we are using MB0A t code for GR,(not using MIGO)..while MB0A..iam going to make GR with ref to Shipping notification then system will through below given message.
No goods receipt possible for purchase order
5500001447 0001
Message no. M7036
tried every thing but unable get. shar your views
Regards
Sapman man

Hi
If you use Shipping notification then you have to create inbound delivery VL31n and do the PGR in inbound delivery VL32N itself.
Incase of scheduling agreement schedule lines you have to make sure the following
1) Schedule line delivery date shoud be todays date or in the past
2) Schedule must be released by using message type based on the type of schedule ( Normal, JIT or forecast)
Hope it helps
Thanks/Karthik

No goods receipt possible for purchase order 4800000097

hi,
i am facing a problem while at the time of Doing GR . it says the "No goods receipt possible for purchase order 4800000097" when i try to proceed with the GR.
I have checked all the necessary possibilities such as
1. PO has been released
2. at the item level delivery tab GR is flagged and delivery complete option not flagged.
3. version management is not activated
4. i checked in the table EKPO field statistical . ther is no entry
plz kindly help
regards
sufiyan

Hi,
Please check the plant in PO and in MIGO are correct and that PO is exist in the system.
Also check PO history in PO.
Regards
ram

No goods receipt possible for purchase order Number and Item number.

Hello experts,
When I create a Goods Reciept with reference to Purchase Order using BAPI_GOODSMVT_CREATE, the following error message appears.
No goods receipt possible for purchase order <PO number> <line item number>.
But the GR is getting created manually using Transaction MIGO for the same PO number.
I found some blogs to check for deletion indicator and Movement type and quantity, when I searched SDN for the same Issue.
In my case
1.deletion indicator is not set for the Purchase order line items
2.And Movement type is 101
3.And gm_code is 01.
Could anyone please suggest me, what else could be the reason for this error?

Here is the code what i have written.
f_gmvt_header-pstng_date = sy-datum.
f_gmvt_header-doc_date   = sy-datum.
f_gmvt_header-pr_uname   = sy-uname.
f_gmvt_header-ref_doc_no = p_ebeln.
f_goodsmvt_code_tmp        = '01'.
* Looping the PO details.
CLEAR: gf_item,f_gmvt_item.
LOOP AT gt_item INTO gf_item.
* fill the bapi item structure details
    f_gmvt_item-material   = gf_item-material.
    f_gmvt_item-plant      = gf_sbms-werks.
    f_gmvt_item-stge_loc   = '0001'.
    f_gmvt_item-move_type = '101'.
    f_gmvt_item-po_number = p_ebeln.
    f_gmvt_item-po_item    = gf_item-po_item.
    f_gmvt_item-entry_qnt = gf_item-quantity.
    f_gmvt_item-entry_uom = 'PC'.
    f_gmvt_item-entry_uom_iso = 'PCE'.
    f_gmvt_item-po_pr_qnt = gf_item-quantity.
    f_gmvt_item-orderpr_un = 'PC'.
    f_gmvt_item-orderpr_un_iso = 'PCE'.
    f_gmvt_item-no_more_gr = 'X'.
    f_gmvt_item-ref_doc    = p_ebeln.
    f_gmvt_item-prod_date = sy-datum.
    f_gmvt_item-mvt_ind    = 'B'.
    f_gmvt_item-move_reas = '101'.
    f_gmvt_item-vendor      = gf_lfm1-lifnr.
    APPEND f_gmvt_item TO t_gmvt_item.
    CLEAR f_gmvt_item.
ENDLOOP.
* cALL THE bapi fm FOR gr POSTING
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
      goodsmvt_header               = f_gmvt_header
      goodsmvt_code                 = f_goodsmvt_code_tmp
*     TESTRUN                       = ' '
*     GOODSMVT_REF_EWM              =
   IMPORTING
     goodsmvt_headret              = f_gmvt_headret
*     MATERIALDOCUMENT              =
*     MATDOCUMENTYEAR               =
    TABLES
      goodsmvt_item                 = t_gmvt_item
*     GOODSMVT_SERIALNUMBER         =
      return                        = t_return
*     GOODSMVT_SERV_PART_DATA       =
*     EXTENSIONIN                   =
IF sy-subrc = 0.
* For commit the changes use BAPI_TRANSACTION_COMMIT FM.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        wait = 'X'.
*      MOVE: f_GMVT_HEADRET-MAT_DOC   TO WA_DET-MBLNR,
*            f_GMVT_HEADRET-DOC_YEAR TO WA_DET-MJAHR,
*            f_GMVT_HEADER-REF_DOC_NO TO WA_DET-EBELN.
*      APPEND WA_DET TO IT_DET.
*      CLEAR WA_DET.
ENDIF.

Direct Posting is not possible for G/L accounts

Hi,
Procurement of Consumables thru Maintenance Order(for Breakdown Maintenance):
1. Generation of Purchase Requisition thru maintenance order .
2. Purchase Order from purchase requisition
3. MIGO
4. MIRO
The required consumables are assigned in maintenance order. when converting PR to PO this consumables will automatically flow. According to the valuation class and gl account in material master GL account will also flow automatically.
When converting PR to PO the system throws an error saying that Direct posting is not possible for the G/L account.
I made this GL account as post automatically to ensure that there should be no manual postings for such automatic account determinated GL accounts thru valuation class.
This error can be resolved by removing the tick mark post automatically but is this correct. If it is so then what is the implication of automatic a/c assignment thru valuation class.
<removed_by_moderator>
Thanks in Advance
Regards,
Radhika
When I am trying to use a G/L account for a Consumable (eg: diesel) (that is required for Maintenance) at PO level (through maintenance order) system throws an error sying that Direct posting is not possible for the G/L account.
Also, teh Same G/L

Hi,
Your balance sheet accounts for stock should be defined as for direct postings only. But the P&L accounts should not be marked.
Regards,
Eli

Confirmation for Refurbishment Order

Dear Experts,
For refurbishment order after the service entry sheet is confirmation of activities required ? If required it should be carried out before service entry sheet or after that ? Please advice.
Regards,
Vivid

Dear Thiagarajan,
Thanks for the reply. I have done GR using MB31 as the system not allowing me to do GR through IW8W .
Now the cost of the material got updated. Kindly tell whether I am proceeding in the right direction as per the below sequence.
Creation of Split valuation Material
Creation of service entry sheet
Creation of Refurbishment order with control key PM03
Release of the order
Goods issue for the order
Creation of PO with the PR generated
Release of the PO
Entry and release of service entry sheet ( will the cost for service only get updated? Not possible to post the material also to the refurbishment order?)
Good receipt for the order
Technical completion of the order
Settlement of the order
Closing the order
Thanks and Regards,
Vivid

Goods receipt not possible for delivery 800001597: error code 4

Hi,
When doing goods recipt for outbound delivery in MIGO, I am getting the below message:
Goods receipt not possible for delivery 800001597: error code 4
When going in details of error messgae:
For error 4 : Check the delivery and its document .
Document flow is as below:
Step 1. PO Created
        2. Delivery created with ref to PO
        3.Picking
        4. Shipment Created
        5. Goods Issue complete.
Now what i have to check.
Thanks in advance.
Regards

Check the link Re: MIGO
Also check OSS Note 458770 - GR for outbound delivery shipping units with batch split and Note 314765 - M7865 during GR f. delivery w/ default values 102 if it applies to your SAP version.
Regards

Goods receipt not possible for outbound delivery...error code 4

hi ,
i created a stock transfer order.
an outbound delivery was created.
pgi was done..
gr was done against this delivery.
but this gr was then cancelled.
now when i am doing gr against this outbound delivery.
i get this eror message.
Goods receipt not possible for delivery 1134930096: error code 4
i have then reversed PGI of this delivery in vl09.
then did PGI again.
but still same error message.
please help.
regards
shashank

Hi,
When system gave you the message with the error code 4, you can click on the message.
There may be various reasons for the error of GRn agaist delivery -
1) GRN already posted against the Delivery
2) Delivery is deleted
3) Delivery is currently processed by another user
System gives you the detailed analysis aling with the codes. You can check what reason is mentioned for reason code 4.
Regards,
Prashant

MIGO is not possible for refurbishment order

Similar Messages

Maybe you are looking for