Migo is not showing the excise tab - header level and item level

Hi,
i have created one PO with excise and i have created MIGO with only capture excise invoice, in MIGO before saving the document system is showing the excise basic, cess and higher education cess in excise tab, header level as well as item level. After saving the document, if i go to dispaly view of the MIGO document system is not showing the header level as well as item level excise amount. The tab itself is not appearing. Can any one help me on this.

Hi,
There are two kinds of statuses, system status and user status.
You can only influence System status if you execute a business transaction that changes the system status.there
are four system statuses open, In process,Released and Completed.
User status can be created as additional information to the system status in any numbers.But for this you
need to define a status profile which would further be assigned to transaction type(header status) and
item categories(item status).
The header status is independent of the item status. One exception is the status Completed.
If all items have the status Completed, the header status is also set to Completed.
For defining a status profile you need to go to
SPRO>Customer Relationship Management>Transactions>Basic settings>Status Management.
Hope this helps.
Regards
Sidd

Similar Messages

  • Not Showing the Admin tab

    Hi All,
    I am new to BIP and trying to build report in Publisher by using biserver Subject areas but when i am logging into publisher through web server (Administrator) but it is showing empty shared and my folders and also not showing the Admin tab.
    By searching some old threads i found that we have to change the security model in xmlp-server-config i don't know why we have to make this setting but i changed this setting as below but now also it is showing empty folders and not showing Admin tab.
    Edit the property SECURITY_MODEL and change it to XDO. i.e. for example <property name=”SECURITY_MODEL” value=”XDO”/>.
    Can any one help me how to build report using biserver SA's.
    Regards,

    Hi ,
    Sorry i did't restart the services now all its looking fine.
    Thanks,

  • Genius Recommendations in the iTunes store does not show the TV tab anymore.

    Recently the Genius recommendations in the iTunes store stopped even displaying the "TV" tab.  I still see the music and movies tabs (and the recommendations in them).  However, there is no tab for TV Shows.  About the same time (maybe simultaneously not positive though) I stopped seeing the quick link (upper right hand side of screen) to get to the TV Shows portion of my wish list.  For the wish list I can still scroll down to the TV section and click "see more" to get to the full list.  However in the Genius recommendations even the "show more" doesn't give me any TV Shows.
    Has anybody ever seen this before?  I'm at a loss after some quick searching on the web.

    Try this,
    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 &amp; above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    Now launch your iTunes and see if it is working now.

  • HT4642 I use numbers with excell 2010, but it does not show the drop tabs, just a number, is this fixable?

    I have a iphone5 and trying to use numbers with it, I use excell 2010, but it will not transfer the dop down boxes on excell 2010. Is this fixable or what?

    Welcome to Apple Support Communities
    The first Mac with Thunderbolt was the Early 2011 MacBook Pro. If you have got a 2010 MacBook Pro, you have got Mini DisplayPort instead of Thunderbolt, which are the same, but Mini DisplayPort can't be used to connect external disks.
    To check which MacBook Pro you have, open  > About this Mac > More Info, and you will see the MacBook Pro model. If it's Mid 2010 or older, you haven't got Thunderbolt, so you have to connect the external drive through USB

  • Pricing procedure for contract conditions at header level and Item Level

    Dear Friends
    In Contract Sales Document Type [VOV8]in Contract section Pricing Procedure for Header and Item
    What is the function of it
    where we can mention list of Pricing Procedure here bec in standard only 3 pricing procedures is available
    Kindly Regards
    Arun

    To have Milestone Billing Plan at header level also, you can maintain Billing Plan 01 in Sales order type (T.Code: VOV8) & for Item level Billing Plan has to be maintained at Item Category Level (T.Code: VOV7).
    Regards,
    Rajesh Banka
    Reward points if helpful.

  • Additional tab item level on MIGO supresses the excise tab at item level

    Hello Experts,
    I have used MB_MIGO_BADI to add an additional tab at item level.It is working properly.
    But now Iam facing a problem the additional tab supresses the excise tab that comes up dynamically at the item level,.
    Now how do i reslove this problem.
    Since excise details are entered later and the tab comes up dynamically my tab should not supress the excise tab at item level
    it should come after the excise tab.
    Now do I set this.
    Please help . highly appreciated. 
    Regards,
    Ranjith N

    Hi Balu,
    Thanks for your reply.
    I dint get you what you have explained.
    Hope you are clear with my problem.
    I have created a subscreen 'ZMIGOITEM' with screen number '9000'.
    In the PBO of BADI MB_MIGO_BADI I have displayed this subscreen.
    This is getting displayed at item level when I call Tcode 'MIGO'.
    After fillin up the details for performing GR..and when I check it it gives me a warning to fill in the excise details when I fill in the excise details at header level and check as per the standards an excise tab at item level should come up right ?
    Since i have added a additional tab the excise tab doesn't come up....the additional tab supress it ...
    Regards,
    Ranjith Nambiar

  • Msi Live Update....not Show The Last Driver

    Hi
    whe MSI Live Monitor (MSI Live Update 3), search.. not show, the last driver...and bios....
    I have a G4MX460-VTP
    and the driver in the MSI Live Update is:
    Online Ver. 4403 (MSI Version)
    but when visit the MSI webpage (http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=154) the last driver is:
    Nvidia driver 45.32 for Win2000/WinXP/Server2003 OS
    and in the Nvidia webpage is 50.16.....
    and the same happend with the VGA Bios...
    y fix my vga cad update the VGA bios....but...this update don't show in the Live Update 3
    How fix it???
    thanks

    Do not update the VGA BIOS unless you have a good reason to. It is not like a motherboard.
    Go to  nVidia Drivers if you want the latest drivers.
    Live Update may not have been updated OR the version reported by the Live Update utility has been tested successfully with that card. Newer drivers sometimes cause problems with older cards. The only way to know for sure is got to the nVidia site and try the latest.

  • How to create a new field for Q3 - QM notification in Header and item level

    Dear All,
    l
               Sub: How to create a new field for Q3 - QM notification in Header and item level
    Ref. the link --> Quality Notification
    We want to create a new field in header level and item level.
    As per the thread the solution is given below.
    In the IMG Config: Quality Management -> Quality Notification -> Notification Types -> Define screen areas for notification types Then Choose 'Define screen areas' Then Click on 'New entries' button Now, select the relevant Notification Type and click in 'Enter'. Select the 'Iten Cases' register and remember to setup the Tabstrip Header, Icon, etc. Set the 'Tabstrip active' flag. Then Save.
    Quality Notification -> Notification Types -> Define screen areas for notification types
    WE ARE UNABLE TO FIND IN CUSTOMIZATION PATH --> DEFINE SCREEN AREAS FOR NOTIFICATION TYPES.
    Please help.
    Question No. 2 :
    THE REQUIREMENT IS GIVEN BELOW.
    We want to hide the field in Q3 - QM Notification
    In header --> Reference tab --> Item (sub heading) --> "DEFECT LOCATION" FIELD TO BE ELIMINATED (HIDE)
    Ref the link --> Quality notification
    The solutiion is given below.
    Hi Sami,
    We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
    Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
    Hope this will suffice your requirement.
    Kindly ask me if you need any other details.
    Thanks & Regards,
    Srinivas.D
    Hi Sami,
    We can hide the collumns using the Transaction OQM1 and Program Name SAPLIQS0.
    Lets say Defect location need to be hidden, the field TXTCDOT need to have the radio button HIDE.
    Hope this will suffice your requirement.
    Kindly ask me if you need any other details.
    Thanks & Regards,
    Srinivas.D
    By double clicking the "DEFECTIVE QUANTITY (EXTERNAL), WE COULD NOT GET --> field TXTCDOT .
    Plese do the needful.
    We are using ECC6.0 Ehp3 and Ehp4.
    With Best Regards,
    Raghu Sharma

    Dear Pushpa,
    Transaction Code :SHD0 is working fine.
    Please accept my sincere thanks for your sharing your Knowledge.
    I am able to fulfill my
    Regarding the enhancement, I have not tried.
    Once I will complete, I will award the fulll marks to you.
    With Best Regards,
    Raghu Sharma

  • ERLA/NORM, Header and Item Level Pricing Issue

    Dear All,
    I have an issue wherein, even though I have used ERLA for BoM Item and NORM for Subitems, in sales order Conditions, both header level and item level pricings are active.
    Correct me if I am wrong, item level pricing should get deactivated.
    Kindly let me know if there is any issue in the settings.
    The default item categories appearing in the sales document is TAQ for higher level item and TAE for subitems
    Thanks and Regards
    Adithya
    Edited by: Adi1976 on Feb 6, 2012 12:08 PM

    Item Category group for Subitems should be ERLA, not NORM.
    Sales Order
    - Item Cat Group
    - Higher I Cat
    - I Cat
    OR
    ERLA
    TAQ
    OR
    ERLA
    TAQ
    TAE
    Try & share feedback.
    Regards
    JP

  • Difference between Header and Item level distribution of GOA

    Hi,
    Can anyone tell me the difference between distribution of GOA at header level and item level?
    can we create multiple operational contracts in ECC when we distribute one GOA?
    Thanks
    Sindhu

    Hi
    Which ECC Version are you using ?
    The transaction for creating a GOA in SAP Frontend is BBP_CTR_MAINCC. The Transaction BBP_CTR_MAINCC cannot be called in the Easy Access. Go with /N then call the transaction.
    <b>Please go through the links below for more details -></b>
    Note 646903 - GOA - Tips and Tricks
    http://help.sap.com/saphelp_srm50/helpdata/en/58/2a8442a07b0e53e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/43/05c0c685da6e72e10000000a422035/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/00/f5c93f4d903b1ce10000000a114084/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/fe/14b042fa34b211e10000000a155106/frameset.htm
    Hope this will definitely help.
    Regards
    - Atul

  • Any questions on Order Management Header and Item level?

    Hi,
    If you are interviewing somebody...And the position he wants is SD consultant.
    What kind of questions will you raise on OM header level and item level??
    Order management--Questions on Header level
                                  Questions on item level
    Thanks, would be better if you could also attach the answer.
    Thanks!!

    Dear Hoo,
    ORDER MANAGEMENT & SALES
    1.Briefly describe the types and structure of the sales document and give examples of data
    that you find on the different levels.
    Sales*related business transactions are recorded in the system as sales documents. There are, broadly
    speaking, four different groupings of sales documents:
    Sales queries, such as inquiries and quotations
    Sales orders
    Outline agreements, such as contracts and scheduling agreements
    Customer problems and complaints, such as free of charge deliveries and credit memo requests.
    Header Data
    The general data that is valid for the entire document is recorded in the document header. This data
    includes the:
    number of the sold*to party
    number of the ship*to party and the payer
    document currency and exchange rate
    pricing elements for the entire document
    delivery date and shipping point
    Item Data
    Whereas data in the document header applies to all items in the document, some data applies only to
    specific items. This data is stored at item level and includes the:
    material number
    target quantity for outline agreements
    number of the shipto party and the payer (an alternative shipto party or payer can be defined for a
    particular item)
    plant and storage location specifications
    pricing elements for the individual items
    Schedule Line Data
    An item consists of one or more schedule lines. The schedule line contains all the data that is needed
    for a delivery. For example, a customer orders 20 pieces of a material and you enter this as an item in
    the sales order. However, you can only deliver 10 pieces now and the remaining 10 pieces next month.
    In other words, you need to schedule two deliveries. The data for these deliveries (dates, confirmed
    quantities) are stored in two separate schedule lines. In sales documents where delivery data is not
    relevant *for example: contracts, credit and debit memo requests * the system does not create any
    schedule lines.
    Data recorded in the schedule lines includes the:
    schedule line quantity
    delivery date
    confirmed quantity
    2.What is the difference between an inquiry and quotation ?
    . Inquiry: Request made to a vendor for a quotation for required materials or services.
    No availability check is done for inquiry.
    . Quotation: Offer from a vendor to a purchasing organization regarding the supply of materials
    or performance of services subject to predefined terms and conditions.
    A quotation consists of a number of items, in which the total quantity and delivery date of an
    offered material or service are specified.
    The total quantity can be subdivided into several partial quantities with different delivery dates in the
    lines of a delivery schedule.
    3.Do you always have to have a material master record number when you enter an item on a
    sales document (inquiry and quote)? If not what would you have to use to be able to enter
    information at item level?
    No. Customer Material Information or Material Description.
    4.If a customer doesn't place an order with you after you have sent him a quotation, what happens to
    the quotation document?
    Remains active till the end of validity period.
    5.Can you have alternative items in a sales order?
    Yes.
    6.If you reference an inquiry when creating a quotation ,would the inquiry be updated?
    Yes.
    7.Can you copy one inquiry to many quotations ?
    No.
    8.Can you copy several previous documents into one sales order?
    Yes.
    9.Do you always have to copy the entire quantities at item level when you reference a
    previous document?
    No.
    10.Can you make sure that business data in a sales order is only possible to maintain at header
    level?
    Yes.
    11.From where is the delivering plant transferred into the sales order?
    Customer Master, Material Master.
    12.Which partner function is relevant for the delivering plant? The soldtoparty ,
    billtoparty, payer, carrier or the ship* to* party?
    Ship*to party.
    13.Can you manually change the delivering plant in the sales order once it was defaulted from
    the master data?
    Yes.
    14.For what or why do you use the incompletion log?
    To have a complete document so that it doesnu2019t affect subsequent processes.
    15.Can you have different incompletion logs for different item categories? Schedule line
    categories?
    Yes.
    16.If a document is incomplete can you still save the document?
    Yes.
    17.Which reference status can a document have at item level? Which statuses at header level?
    Item level: Partial, Full.
    Header level: Full.
    18.What's the advantage of using text as a reference instead of duplicating it?
    Can be modified if needed.
    19.What three sources provide data for the creation of a sales document?
    Material Master, Customer Master, Previous referenced documents.
    20.Can you change addresses of partners manually in the sales document?
    Yes.
    21.Name several input tools that make order entry faster and give a definition of them?
    Customer Material Information, Product Proposal , Referencing Documents.
    22.In which business environment would you use only the single*line entry screen to create
    and save the order?
    Telephone Sales, Simple Business.
    23.If you do not specify the delivering plant in the sales order, what could the system then not
    do?
    Delivery Scheduling.
    24.For what would you use the fast change function in sales entry?
    Alternate Plants, Delivery or Billing Blocks
    25.Name two ways to control that customers can receive only certain materials?
    Material Listing, Exclusion.
    26.What does the item category control?
    General Data
    . Should pricing be carried out for the item?
    . When should an item be regarded as completed? A quotation item, for example, can only be
    regarded as completed if the entire quantity has been copied into a sales order.
    . Is it an item that refers to a material or is it a text item?
    . Are schedule lines allowed for the item?
    . May general business data, for example, the terms of payment at the item level, deviate from
    those at the header level?
    . Should a system message appear if the item cannot be fully delivered?
    . Which fields are relevant for the incompletion log?
    . Which partner functions are allowed at the item level and which are mandatory?
    . Which output (for example, an order confirmation) is allowed for the business transaction and
    which output determination procedure is used?
    Shipping Data
    . Is an item relevant for delivery?
    . Should the weight and the volume of an item be determined?
    Billing Data
    . Is an item relevant for billing?
    . Should the cost of the item be determined?
    . Is it a statistical item? Pricing is carried out for statistical items. However, they are not added
    to the value of the order, that is, the customer is not charged for them.
    . Should a billing block be set automatically for an item? For example, this may be important for
    items whose prices have to be clarified before billing
    . Is it a returns item?
    . Name the influencing factors for determining the item category in the sales document?
    . Sales Document type, Item Category Group, Higher Level Item, Item Usage.
    . Name the influencing factors for determining the scehdule line category in the sales document?
    . Item Category, MRP Type.
    . What does the sales document type control?
    General Data
    . Can the document be entered only with reference to a preceding document?
    . Should the existing customer
    . material info record be taken into consideration?
    . Should the delivery date be proposed?
    . Must a customer number be entered when creating a document? For example, product
    proposals can be entered without reference to a particular customer.
    . Which order probability is defined?
    . Should the division be taken from the material master record for every item or should an
    alternative division specified in the header take precedence over the item specifications?
    . How should the system respond if the division entered in the header deviates from the division
    in the items?
    . Should a credit limit check be made?
    . From which number range should the document number for internal or external number
    assignment come?
    . Which fields are relevant for the incompletion log? The validity period, for example, is
    important for contracts and must therefore be specified in the document.
    . Can an incomplete document be saved or must all data be complete?
    . Which partner functions are allowed and which ones are mandatory?
    Shipping Data
    . Which delivery type should the delivery resulting from the order have?
    . Should delivery scheduling be carried out?
    . Should transportation scheduling be carried out?
    . Should a delivery block be set automatically for a specific reason? For example, a delivery
    block may be appropriate for a freeofcharge delivery.
    . You can define shipping conditions for a sales document type. These are copied into the
    document regardless of what is defined in the customer master record.
    Billing Data
    -->Which billing type should the invoice resulting from the order or the delivery have?
    Should a billing block be set automatically for a specific reason? For example, a billing block may be
    appropriate if a credit memo request should first be checked before it is used as the basis for a credit
    memo.
    -->Can the sales document type be determined by the system?
    No.
    -->In R/3, can you automatically substitute one product for another? How? What would you
    have to create?
    Yes. Product Selection / Material Determination.
    -->Give a definition of replenishment lead time?
    Total time for the inhouse production or for the external procurement of a product. In inhouse
    production the replenishment lead time is determined to cover all BOM levels.
    What's the difference between checking availability with or without replenishment lead time (RLT)?
    With RLT : Availability check is done only upto end of RLT. If material is not available the date on
    which RLT ends is displayed as Material Availability Date.
    Without RLT : Availability check is unrestricted. Displays Delivery Dates as on which partial deliveries
    can be made with available stock.
    -->Name at least three item categories?
    Standard Items : AFN, AGN, TAN.
    Free of charge Items: AFNN, AGNN, TANN.
    Non*stock Items : AFX, AGX, TAX.
    Text Items : AFTX, AGTX, TATX.
    -->Why would you use different item and schedule line categories?
    Item categories are defined to provide additional control functions for the sales documents and thus
    meet the demands resulting from the different business transactions.
    The items in a sales document are divided into one or more schedule lines. These schedule lines differ
    from each other with respect to date and quantity. For some schedule lines, material requirements
    planning is not carried out; for other schedule lines, it is carried out. Also goods receipt, not goods
    issue, is posted for a schedule line defined in a returns document.
    -->Can you change existing standard item categories?
    Yes.
    -->Can you create new sales order types?
    Yes.
    -->Different dates will be calculated in order entry scheduling . Can you name the lead time
    variables that will be taken into account?
    Transportation lead time, Pick/pack time, Loading time, Transit time .
    If you run out of stock in a specific plant can you check if there are quantities available in other plants?
    Yes.
    -->When you carry out availability check, which quantities or movements can the system take
    into consideration?
    The following elements can be included in the availability check:
    Stocks : safety stock, stock in transfer, stock in quality inspection, blocked stock.
    Inward and outward movements : purchase orders, purchase requisitions, planned orders, production
    orders, reservations, dependent reservations, dependent requirements, sales requirements, delivery
    requirements.
    -->Give some examples of sales document types (description, not necessary the short code)
    that already set up in the standard system?
    Indicator used to control the processing of the various sales documents which are defined in the
    system. E.g., OR, SO, BV, KR. Document types allow the system to process different kinds of business
    transactions, such as standard orders and credit memo requests, in different ways.
    -->Can you maintain texts for a specific customer and store them in the system? If yes, where?
    Yes. Customer Material Information.
    -->When the system checks availability which scheduling would it use first?
    Backward Scheduling.
    -->Name the influencing factors for the determination of the availability date?
    The following data is required for determining this date:
    Route from the shipping point to the ship*to party location
    Shipping point from which the goods are issued
    Loading group from the material master record
    Weight group determined from the order using the order quantity.
    -->Name the three delivery possibilities when there is not enough stock available?
    One Time Delivery, Complete Delivery, Partial Deliveries.
    -->Can you think of an example why you would have to create a text for a customer and copy it
    to the sales order?
    Customer specific instructions.
    -->What is the function of item category group?
    The item category group determines how a material is processed in the sales order. It defines, for
    example, that pricing does not take place for a free of charge item, such as a business gift; or that
    inventory management is not carried out for a service. When processing sales and distribution
    documents, the system uses the item category group to determine the item category. The system
    determines the item category based on the item category group of the material and the current
    business transaction, and proposes it in the respective document.
    When creating the material types non*stock material and services, DIEN is proposed in both cases for
    the item category group, because the order processing for both material types is identical: for
    example, pricing is carried out for both, but no availability check.
    -->On sales order, when the system confirms 20 pieces to be available at a certain date, would
    these 20 pieces still be available for other new sales order coming in later?
    No.
    -->What is a delivery group and why would you use it?
    The complete delivery and delivery group functions enable you to combine some or all of the items in a
    sales order so that they are delivered to the customer together. The system determines automatically
    the latest delivery date possible for the delivery group and adjusts the schedule lines accordingly.
    Corresponding requirements for material requirements planning (MRP) are changed or re*determined.
    -->What is backorder processing?
    The backorder processing functions enable you to list relevant sales documents for specific materials
    and process them from the point of view of availability. You can assign available to promise (ATP)
    stock to outstanding order quantities. In addition, you can withdraw already confirmed quantities and
    reassign them to different items.
    Backorder processing is only available for materials with individual requirements.
    -->Can you link items in a sales order? If yes, when would you do that?
    Yes. Promotional Items.
    -->For what would you use BOMu2019S in sales? What two methods of BOM processing do you have
    in sales order entry? How can you control if the system should/should not explode a BOM in
    the sales order.
    A bill of material (BOM) describes the different components that together create a product. A BOM for
    a bicycle, for example, consists of all the parts that make up the bicycle: the frame, the saddle,
    wheels, and so on. When you enter the material number of a bill of materials that is relevant for sales
    order processing, the system displays the material that describes the whole bill of materials as a main
    item. The components are displayed as sub*items.
    Processing by Main Item : ERLA & Processing by Sub*Item : LUMF
    BOM explosion can be prevented by specifying Item Category Group as NORM.
    Credit limit checks is an example of a very close link between which two SAP modules?
    SD & FI.
    -->What are the two techniques in delivery scheduling?
    Backward Scheduling & Forward Scheduling.
    -->How does a third party deal work? Do you use a special sales order type for that? How could
    the system know that you want to process a third party deal?
    By specifying item category as TAS using double*line entry in the sales order.
    No special order type is available.
    By the item category group and/or material type in Material Master .
    Name the several steps in consignment processing.
    Consignment fillup, Consignment issue, Consignment pickup, Consignment return.
    Whatu2019s the difference between consignment pick*up and consignment return?
    In consignment pick*up, customer returns consignment stock. When goods issue is posted, the
    relevant quantity is deducted from the customer's special stock and is added back to regular stock at
    the plant where the goods are returned. Total valuated stock remains the same since the returned
    stock was regarded as part of inventory even while it was at the customer's premises.This transaction
    is not relevant for billing.
    In consignment return, customer wishes to claim on consignment goods which have already been
    issued. When goods issue is posted, the relevant quantity is added to the customer's special stock at
    the plant where the goods are returned. Since the ownership of the goods is passed from the customer
    back to the company, the transaction is relevant for billing. In this case, the customer receives a credit
    memo for the returned goods.
    -->Can you control that an end user cannot copy a quote of customer A to a sales order for
    customer B? If yes, where?
    Yes. By customizing Copying Control for header data.
    Give some example for data that is copied from the customer (soldto, payer, shipto) to the sales
    order as well as for data that is copied from the material?
    General data, payment terms, shipping details, delivery agreements, delivering plant.
    -->What is returnable packaging processing?
    Returnable packaging consists of materials that are stored at the customer location but which remain
    the property of the company. The customer is only required to pay for the returnable packaging if he
    does not return it by a specified time.
    Name the two outline agreements in R/3 standard and explain the difference between them.
    Agreements are arrangements between business partners regarding the granting of conditions over a
    specified time period. The agreement contains conditions which apply over a particular time period and
    which are settled together at the same points in time. An agreement can be settled once or
    periodically. The two outline agreements include Contracts and Scheduling Agreements.
    Unlike a contract * which only contains an overall target quantity or value * a scheduling agreement
    also contains specific order quantities and delivery dates.
    -->How many documents do you create when you release, deliver and invoice the first order
    from a contract?
    Three : Sales order, Delivery note, Invoice.
    -->What types of output can you have in sales?
    Printer, Telex, Fax, Mail, EDI.
    -->Can you automate output processing ? Do you always have to specify it manually?
    yes. No.
    -->Where would you specify which data should be copied (at header, item and schedule line
    level)when you copy from one document to another one?
    Customizing Copy Control.
    I hope it will help you,
    Regards,
    Murali.

  • Header and Item level in Material Master

    Can some one explain abt the header level and item level in Material master.
    Thank you
    Appreciate your Help

    Hi,
    As explained by Jurgen, There is no term like item level and header level as such in respect to material master.
    But just for convenience per say, you may call like below.
    MARA :- Header level --( Client level data)
    MARC,MARD,MBEW,MARM,MVKE :- Item level -- ( Organizational element level data).
    Hope it will help u.
    Deepak

  • Header and item level

    Hi all,
    Can u please explain about header level and item level in purchasing document.
    Thnks & Regards
    SAP Beginner

    Hi
    Header level--
    Consider a PO with 2 items.
    Example: Freight 1000 inr is entered at header and the system will divide this value for the 2 items proportionately.
    Item level--
    Consider a PO with 2 items.
    Example: Freight 1000 inr is entered for each item level and it is applicable only for that item.
    Text, delivery costs all these follow the above rules.
    Thx
    Raja

  • Not show the header on the first page of a section

    I am writing a manual that has about 7 chapters. Each chapter is its own section. I have been able to go in and create a header for each of these sections very easily. However, it's not quite clear how to NOT show the header on the first page of the section. For example, one of my sections is called "Personal Finances", so I have that in bold a the top of the page using Header 1. Because I have that, I don't also need "Personal Finances" showing in the top right corner in the header.
    How can I make it so that it won't show on the first page of each section?
    Thanks!

    How can I make it so that it won't show on the first page of each section?
    In the "Layout Inspector" under the "Section" tab, check the "First page is different" option while one of that section's pages is active/selected/displayed. Then add or delete the header as may be needed so that first page of section does not display the header and all other pages in the section do display. (I.e., what you specifically have to do here depends on whether or not you are already on the first page of the section when you make the change to the display "switch" and whether you are starting with a blank or non-blank header.)

  • IN MIGO display mode not displaying the Invoice tab.

    Dear Sappers
    My Problem is , We r doing MIGO with excise & it capture well  posted it, But after that in display mode of MIGO the excise invoice tab not display?
    Why? How will get it?
    Please suggest better solution........
    Thanks

    I understand this note is useful if Excise tab not dispalyed while doing MIRO. But the issue is -In dispaly mode of MIGO the excise tab is not dispalyed even though we have captured the Excise during MIGO.
    Please let me know some solution on this as I am also facing same problem.
    Thanks
    Dhanu

Maybe you are looking for