MIGO,MB1B, print indicator should be default

Hello
MIGO and MB1B transcations, print indicator is not selecting automatically. why?
background:
In user profile (SU01D), paramater NDR was maintianed correctly.
eventhough user is having NDR parameter, but he is not able to see the print indicator automatically??
in additioon , if they give manually print indicator for individual slip /collective silp, out is saved. and output is displayed in green color in GR iteam leavel "Message" tab.It means output setting are correctly maintained.
even i tested with my user id..if i dlete the NDR to my id, it is not working.
again i added NDR parameter, now it is correctly.
Question: In production already user was maintained with NDR parameter, but he is not able to see the print automatically.
so shall i delete his NDR parameter once and add again?? this will be work or not ?? please confirm.
Regards,
Pabbati Obulesu

Hi,
NDR parameter value should be upper case X.
Pls check your user parameter.
Regards,
Renuga.A

Similar Messages

MIGO - NDR print indicator default to unchecked

We would like to default the 'print' box in MIGO to always be unchecked when a user goes into the transaction. There will be times when the user will check the box to print a label; however this will not be often. Today, if a user checks the box, backs out of MIGO, then goes back into MIGO the box remains checked. It's like it remembers whatever was set in that box previously.
We've tried playing with the user parameter of NDR being set to 'X' (capital), or being set to blank, but it's like the parameter is not being read at all. The screen is only remembering what we did last when we re-execute the transaction. We've also tried playing with the GET/SET parameters in SE51, program SAPLMIGO screen 0110 - but again no luck.
Am I missing something being set somewhere for the NDR parameter to be read? Any tricks to get this to always default to unchecked?
Thank you for the suggestions.

I worked with ABAP'ers and it looks like this change was already in the enhancement section:
Program: LMIGOKH1
ENHANCEMENT-POINT HEADER_DEFAULTS_SET_02 SPOTS ES_SAPLMIGO.
Set print indicator
GET PARAMETER ID 'NDR' FIELD ps_gohead-xnapr.
We also have this:
Program: LMIGOHG2
    CHECK lcl_migo_globals=>kernel->s_action-create = abap_true."       307284
     REPLACE
    SET PARAMETER ID 'NDR' FIELD gohead-xnapr.
The even more strange (frustrating) thing is that if we set a break point at the SET indicator in program LMIGOHG2, then the logic is picked up based on the user Parameter - not based on the last value that was entered. However, if a breakpoint is set at the "get" section - it does not work.
I may be sending this one to SAP. Thank you for your suggestions.

Default print indicator tick in MIGO transaction

Hi all,
I need to set the print indicator for 'Collective slip' ticked by default for all the documents created in MIGO. I have done output determination settings for the same. How to do this? Because what happens is that, sometimes user doesnt ticks the check box and ultimately output doesn't gets saved. When i try to tick it from display mode in MIGO, again output doesnt gets saved. And i am doing it in MB02. Is there a way out to set the indicator(Check box) default for all documents created in MIGO?
Thanks in advance.
Regards,
Raj.

Goto SU3,enter your userid,in parameter tab give NDR and maintain parameter values as X.
regards,
indranil

Printing indicator in mat. doc

Dear all,
When viewing a material document in MB03, it is found that the print indicator is selected, but none of the printing options: Individual Slip/Indiv.Slip w.Inspect.Text/Collective Slip is selected.
I just wonder how user could do so, as it is supposed that he has either select or not select the printing option in MIGO.
Is this a system bug?
Thanks in advance!

It is not a bug. some iuser would have ticked the print functionality while doing MIGO.
Thanks & regards,
Kiran

.error Print indicator 029 not defined. Message no. L3118.

error Print indicator 029 not defined. Message no. L3118
Hello everyone.
I need some help.
when i run program RLVSD40 (Initiate printing of transfer order).
i got error.
Print indicator 029 not defined
Message no. L3118
what should i do to solve this error ?
please help.

Hello,
I am getting the same issue.
Please let me know the solution.

Printing of transfer order . error Print indicator 029 not defined.

Hello everyone.
I need some help.
when i run program RLVSD40 (Initiate printing of transfer order).
i got error.
Print indicator 029 not defined
Message no. L3118
what should i do to solve this error ?
please help...

is 029 your warhouse?
if so then SAP found a record with print indicator "blank" , but this "blank" print indicator is not defined in OMLV.

Problem printing plant maintenance order (DEFAULT PRINTERS)

Hi,
I configured default printer in SPRO --> Plant maintenance and customer service --> Maintenance and Service Processing --> Maintenance and service orders --> Print control --> Define printer
I created 2 plant maintenance orders to test the printings jobs.
For 2 different orders, I got the following error message in the printing logs (it's in french): INOPÉRANT (means not working in english). What config should I correct. Could the problem be in the orders? Thanks.
TEST IMPRESSION 31.03.2009 u2013 PROTOCOLE IMPRESSION u2013 BORDEREAU 11100942
000011100942 0010 5210A   YUL_CONTROL#2    2060 Bon de main-d'oeuv 3 VALLIEMA   31.03.09   07:20:53
000011100942 0020 5235    YUL_ENTR#6       2060 Bon de main-d'oeuv 2 VALLIEMA   31.03.09   07:20:53
000011100942 0030 5235A   YUL_ENTR#12      2060 INOPÉRANT
000011100942 0040 5235B   YUL_ENTR#9       2060 INOPÉRANT
000011100942 0050 5235C   YUL_ENTR#9       2060 INOPÉRANT
000011100942 0060 5280B   YUL_ENTR#4       2060 Bon de main-d'oeuv 2 VALLIEMA   31.03.09   07:20:53
000011100942 0070 7230I   YMX_ENT#2        2060 Bon de main-d'oeuv 2 VALLIEMA   31.03.09   07:20:53
TEST IMPRESSION 31.03.2009 u2013 PROTOCOLE IMPRESSION u2013 BORDEREAU 13208581
Ordre Nº     Opé. Poste   Uté sortie       APap Formulaire        Cop. Utilis.    Date       Heure
000013208581 0010 5235A   YUL_ENTR#12      2060 Bon de main-d'oeuv 1 VALLIEMA   31.03.09   08:03:16
000013208581 0020 5235B   YUL_ENTR#9       2060 INOPÉRANT
000013208581 0030 5235C   YUL_ENTR#9       2060 INOPÉRANT

Hi,
I am not sure but are you trying to print shop papers at default printer specified in config.First thing is are orders released,I presume they are released hence you are getting message.
Next thing is check config as below:
Application area - O for maint orders
Planning plant - * or define your plant
Planner group - * or same as above
Shop paper - Define shop paper or *
Output device - LOCL or your device property...It is advised to put LOCL as different users can ahave different printers.
Storage mode -1 for printing only
then select print immediately and delete after output.
After this in your master(SU01) define output device as LOCL and this will pick up your default printer of your desktop or working station as configured in windows.
Also check if right shopapers you have assigned to order type,you can confirm them if you see in print preview.
regds,
atul

ICal: how to make my print selections become the default

how do I make my chosen printer selections become the default? Also, is there a way to assign selections to a named type of "file", i.e, "My Calendars", "My To Dos", etc.?

If you leave a CD, DVD, or some disc with data, in the internal drive, it should then use the external drive for burning. If you use good blank discs, such as Verbatim, there should be no reason to reduce the burning speed.

Print Indicator in ME9F

Where the print indicator is set in ME9F when we took the PO printout. i want to use it in my report of PO printout.
my rewuirement is that if the PO print is been taken , then it should not another for the same PO to take print again.
where it is updated in ME9F and from where n how i can took it to my code?

Hi
It should be NAST-VSTAT, but I don't know what print indicator means, if it's the status it's NAST-VSTAT
NAST is the table where the message is stored
Max

What should my default route be with a VPN?

I have a remote site that is connected to my main site using a VPN over the internet. ALL traffic on the remote site should come back to the main. On the remote site I have the outside interface configured with a crypto map indicating that the peer is my Main site's outside ASA (VPN endpoint) interface. The VPN functions and most of the traffic seems to be flowing correctly, except..
When a user tries to telnet to a site the packets seem to be going out to the internet instead of through the VPN tunnel? The way I came to this conclusion is I did a traceroute on the router to the IP of the Telnet server and see that it goes to the internet and gets lost. A traceroute from the user's station shows it goes out their router and just times out afterwards.
There is 1 static route on the router specifying the default route as the ISP's interface. This is the correct next hop but with my crypto map configured on the interface and with the peer being my main site, is this configuration correct? Should my default route on the router be my VPN peer's IP as the next hop or the ISP's?
Also do you think this is the reason why packets are getting routed to the internet instead of back to my Main site? Thanks for any help!!

Thanks for the reply Karsten. I'm thinking now that the issue is actually back at my Main site and not at the crypto map. When I was on the remote router and did the traceroute (which went to the internet) I think it was only because I didn't specify which specific interface to ping from.
I still wasn't sure about that next hop though so thanks for answering that! -Mark

How to print report on client default printer ?

I develop web application. I use jdev 10.1.3.4.0 . I can print report in PDF format.
My Problem
I can't print report on client default printer. when Client run application and print. Report is printed at server default printer
How can I do.
_My source code for print to PDF format._
FacesContext context = FacesContext.getCurrentInstance();
response = (HttpServletResponse)context.getExternalContext().getResponse();
String urlSchema = "jdbc:oracle:thin:@localhost:1521:ORCL";
String schemaName = "hr";
String schemaPass = "hr;
reportPath = "D:\\Project\\Reports";
Class.forName("oracle.jdbc.driver.OracleDriver");
conn = DriverManager.getConnection(urlSchema, schemaName, schemaPass);
reportPath = reportPath.endsWith("\\") ? reportPath : (reportPath + "\\");
input = new File(reportPath + reportName + ".jasper");
reportParameters.put("SUBREPORT_DIR", reportPath);
reportParameters.put("P_IMAGE_PATH", reportPath);
jasperPrint = JasperFillManager.fillReport(input.getPath(), reportParameters, conn);
response.setContentType("application/pdf");
response.addHeader("Content-Disposition", "attachment;filename=" + reportNameOutput + ".pdf");
OutputStream outputStream = response.getOutputStream();
JasperExportManager.exportReportToPdfStream(jasperPrint, outputStream);
outputStream.flush();
outputStream.close();
conn.close();{code}
_My source code for print to *printer*._
{code}FacesContext context = FacesContext.getCurrentInstance();
response = (HttpServletResponse)context.getExternalContext().getResponse();
String urlSchema = "jdbc:oracle:thin:@localhost:1521:ORCL";
String schemaName = "hr";
String schemaPass = "hr;
reportPath = "D:\\Project\\Reports";
Class.forName("oracle.jdbc.driver.OracleDriver");
conn = DriverManager.getConnection(urlSchema, schemaName, schemaPass);
reportPath = reportPath.endsWith("\\") ? reportPath : (reportPath + "\\");
input = new File(reportPath + reportName + ".jasper");
reportParameters.put("SUBREPORT_DIR", reportPath);
reportParameters.put("P_IMAGE_PATH", reportPath);
jasperPrint = JasperFillManager.fillReport(input.getPath(), reportParameters, conn);
JasperPrintManager.printReport(jasperPrint, false);
conn.close();Edited by: jaae251 on Jun 18, 2009 2:29 AM

If you offer a PDF to the end user, they usually know what to do with it. OTOH, if you wish to provide software to facilitate the local printing, you might launch an application on the client side that accesses the JNLP API's PrintService - that can be done in a sandboxed application.
A signed application might access the normal J2SE based print services. Though I heard that Sun had decided to make printing a 'prompt on first attempt' deal - even for sandboxed apps., from 1.5 plus (or was it 1.6 plus?).
It would be a serious security bug if a web site could print on the client printer, without trust or active involvement from the end user.

Print button should not perform its action in report previewer

Hi all,
Report version 6i
I am invoking a report from a form , the form has one status field ,the value can be NEW,APPROVED,CANCEL
i just want take the print of the report if the status is approved , in all other cases the print button should be perform its action.
that is , when user tries to print the report , its function should not happen.
Please Guide.
Thanks
:8}
Edited by: elegant on Jul 13, 2010 12:49 PM

ADD_PARAMETER(param_list,'DISABLEPRINT','YES');
ADD_PARAMETER(param_list,'DISABLEMAIL','YES');
if you want to enable it give
ADD_PARAMETER(param_list,'ENABLEPRINT','YES');
ADD_PARAMETER(param_list,'ENABLEMAIL','YES');

Baseline date should be default GR date

Hi All,
Kindly give me step by step idea to do
Baseline date should be default GR date through user exit.
I am new in user exit.
if there is any other way to do this mentain that all with full details.
Thanks & Regards
Shantanu.

Hi Shantanu again,
I giving example how to create Use exit and write your code.
E.g.
Follow the below steps:
1. Go to the 'Components' tab after displaying the enhancement MBCF0005 in smod.
2. Double click on the function module 'EXIT_SAPM07DR_001'.
3. Double click on the include ZXMBCU05 inside this function module.
( A warning message comes when u double clisck it, ignore it and press 'Enter'. Then u can code your enhancment in that include).
4. After the coding, activate the include and in tcode CMOD create a project and include the enhancement ZXMBCU05 in it and activate.
Your enhancement will be activated now and will be called during the processing.
after creating include put break-point in it and check with your t-code that breaking point is hitting or not.
Hope this will help.
Regards,
Vijay

ADOBE 8.0 - ADOBE PRINT IS SET AS DEFAULT PRINTER

Hello,
When I convert a Word document to pdf (File/Print select Adobe PDF) in Acrobat 8 (Pro or Standard) the next time I go to print a Word document it prints with the Adobe PDF printer and not my default printer. This was not an issue in Acrobat 7.0. Anyone else experiencing this issue?
Thanks,
Tina

Visit this sub-forum of the Acrobat U2U Forums:
http://forums.adobe.com/community/acrobat/printing_%26_prepress
Be well...

IPhoto was working fine. Performed update for HP printer, which should have nothing to do with iPhoto. But the next time I tried to open iPhoto, got this message. "To open your library with this version of iPhote, it first needs to be prepared." When I g

iPhoto was working fine. Performed update for HP printer, which should have nothing to do with iPhoto. But the next time I tried to open iPhoto, got this message. "To open your library with this version of iPhote, it first needs to be prepared." When I g

What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

MIGO,MB1B, print indicator should be default

Similar Messages

Maybe you are looking for