MIGO not updating with excise value.

Hey Guys,
I am facing with this problem of MIGO not
updating with excise value.
When I am creating the MIGO doc, and after
I give the excise invoice no. the excise
values are not picking up. Its showing
zero values.
The following
steps are being followed by me.
ME21N - Create STO from plant to warehouse
VL04 - Create outbound delivery
VF01 - Create invoice
J1IIN - Excise invoice
MIGO - Goods receipt at warehouse
Earlier it was working fine, but after
we upgraded the system with patches and implemented
Secondary higher education cess the
problem arose.
Please advise.
Appreciate your help.
Thanks,
Zak

Got answer from SAP..dunno what they did but it was rectified.

Similar Messages

Batch Split in OBD & billed for the entire Quantity .RG1 register does not update the excise values

Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank you

My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi

J_1IRG23D Table was not updated With Correct Values While Doing MIGO

Hi Friends,
I am new to the Excise duty , facing a proble in CIN -While doing MIGO, the Excise Calculation are coming correct values (i.e 10% ),but in the table it was not updated correctly (J_1IRG23D) only one entry is showing wrong ,the other entries in the table are correct.
In table -J_1IEXCDTL the EXBED it was with correct value 10% of the Base value
But In table -J_1IRG23D the EXBED,ADE,CESS It was updated with 0.06% on the base value .its gives wrong value
Kindly help in this issue.
Regards
Siva

Hi,
Go to T Code - J2I5 (not 215 it is j 2 i 5) enter details and select register PLA Check box and execute. This can be extracted many times - no problem.
After J2i5 balance will update in registers including tables.
Ramesh

Editable alv not update with decimal values

Friends.
i have editable alv, there is a editable field is with 3 decimal places.
my problem is when i changed there value as 15 its take 1.5 and if i change as 150 its take 15.
can you please help me to solve my problem?
thanks in advance!

Hi Friend,
This Problem will be solved in below method.
Define Your filed type in currency.
Eg. vnumber TYPE CE1SAS1-KWABLK (kwablk is a currency field).
In FIELDCATALOG add currency.
Eg:
lw_fcat-fieldname = 'VNUMBER'.
lw_fcat-edit = 'X'.
lw_fcat-datatype = 'CURR'.

VALUES NOT UPDATED IN EXCISE INVOICE

hi gurus ,
well all the settings to my knowledge are correct for CIN customization , but the excise values are not updated in excise invoice .the values are 0 " . can ne1 pl help ? dts top priority .

Hi,
Spro>Logistics u2013 General>Tax on Goods Movements>India>Business Transactions>Specify Which Movement Types Involve Excise Invoicesu2014here check for movt type 122 which register is maintained once appropriate register is maintained there then system will update the same.
Or even you can try J1I5 update register with movt type 122 & enter material document (return delivery material document no) & classification IPD (Issued for clearance/Removal on payment of duty) & select the correct radio button of register. Once update the register then Extract data for excise registers Using J2I5.
It will update both the data in the register
Rgs

Note 951952 - Incorrect excise values if batch split in MIGO for import PO

Dear participants,
We have applied Note 951952 - Incorrect excise values if batch split in MIGO for import PO,
for following issue,
While doing import goods receipt for batch split quantity,
excise base value is calculating for entire amount not by splitted quantity.
We are unable to solve this issue.
We are using SAP ECC release 6.0 level 11 whether above mentioned note can be applied or else any other
new notes to apply solve this issue.
Advance thanks
Regards,
A.Jeyakanthan

Thanks for reply,will check note is applicable for current package level.
Actually we found excise base value is same for GR of batch split quantities for same material
with valuation type import duty free.

Update commercial invoice with excise values

Hi friends,
We have implemented depot sales; End user made first two invoices with my presence its worked fine. After one day he made third invoice with out my presence, this invoice is not capturing excise values like BED, AED, ECS and S & H cess. After this I found a route cause that
user has selected JF delivery document type instead of LF. Here I canu2019t cancel the OBD and excise invoice since a manual commercial invoice is already sent to customer with some commercial invoice no, say XXXXX196. So when I create commercial Invoice, invoice should generate with XXXXX196 no.
I canu2019t save billing document created with reference OBD because commercial invoice is not capturing the excise values and here I canu2019t key in excise values manually because all excise condition types are In grayed status, But some how I need to update all excise values. So can you please help me how do I can go ahead?
Thanks,
Krishna Reddy

Normally VAT is not calculated on the BED/ECESS etc and the VAT is calculated on the Basic price.
What seems in your case is that the pricing procedure is configured based on this logic. For calculating VAT , the system refers to a tax base value , which is condition type. So in your case the tax base value would be excluding the BED/ECESS and other taxes in the current pricing procedure.
Modify your pricing procedure and get the New tax base value which should included BED/ECESS etc.
Now your VAT condition type should refer to this new tax base value for calculating the VAT ( tax).
This will solve the problem.
Ashok Chauhan

Batch Characteristic not updating with result for linked MIC

Hi,
I have created a MIC and linked to a batch characteristic i.e. potency and included the characteristic in a specific batch class. This MIC is part of the inspection plan for a certain material.
If I generate a lot of origin 01 and 09 for the material and record a result for the MIC and apply a UD, the batch characteristic is not updated with the result recorded in the batch master record..
If I generate a lot origin 89 for the same material, when the result is recorded for the MIC and apply a UD the batch characteristic is updated with the mic value in the batch master record.
Can you help regards?

Ok. I am a little bit further.
I put a trace (ST05) on the result recording and I find a difference between 4.7 and ECC6.0.
In ECC6.0 I've an deletion in table "AUSP". This deletion isn't performed in the 4.7 system.
Hope that this can help to solve my problem.
Regards,
René
@ Mayank
Above, all the master data and customizing is mentioned to transfer the result to the batch classification
Edited by: Rene Fuhner on Jul 30, 2010 7:03 PM

The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assi

Hi ,
We have enabled context sensitive DFF in Bank Branch Page for HZ_PARTIES DFF , We have created Flex Map so that only bank branch context fields are only displayed in the bank branch page and as we know party information DFF is shared by supplier and Customer Page so we dint want to see any Bank Branch fields or context information in those pages.
We have achieved the requirement but when open existing branches bank branch update is throwing below error message :
"The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assistance."
this error is thrown only when we open existing branches, if we save existing branch and open then it is not throwing any error message.
Please let us know reason behind this error message.
Thanks,
Mruduala

You are kidding? It took me about 3 minutes to scroll down on my tab to get to the triplex button!
Habe you read the error message?
Quote:
java.sql.SQLSyntaxErrorException: ORA-04098: trigger 'PMS.PROJECT_SEQ' is invalid and failed re-validation
Check the trigger and it should work again.
Timo

Error at the time of MIGO- not reading the excise base from invoice

hi gurus
when we do inward the material during sto using migo, the following error occurs Error at the time of MIGO- not reading the excise base from invoice
kindly suggest right answers to overcome this?
with regards
baalakrushnan.da

hi,
Go to logistics general and see whether for the excise group migo settings are maintained.
See for the material in depot chapter id and excise indicators are maintained ie J1ID.
since depot also considered as plant so the chapter id and plant combination has to be maintained.
Regards
Saju

GR Value is not matching with PO Value while posting good receipt.

Hi Experts,
My client has raised the PO with accounts assignment category K (COST CENTRE) with material description.
but he has received invoice receipt before good receipt.while invoice receipt he has entered wrong value for some qty as per PO intially and cancelled that wrong entry.
I have gone through original & cancelled invoice document accounting entries. below is entries:
Original invoice document accounting entries:
GR/IR Clearing account: Debited
Vendor account: Credited
during cancelling the above document it should be vendor acc is debited and GR/IR account is credited but in the system below entries taken place
Cancelled invoice document accounting entries:
Vendor account : Debited
GR/IR Account : Credited
Consumption Account : Credited
Why consumption acc taken place here. pls help what are the possibilitis....
these entries affecting good receipt value means while taking goods receipt for some qty out of full qty value is not matching with PO value.
but while cancelling the GR documents system taking correct values as per PO. Please help.
Kindly help in this regards
Regards
Mohan

Hi,
Check the Credit Memo document whether G/L tab is there & whether any G/L account is entered ?
I think instead of cancelling the MIRO document they might have posted a vendor credit memo manually by specifying a consumption GL.
Thanks & Regards,

Purchase Order history is not updated with Invoice number

Hello Experts ,
Please suggest some inputs/solution for my problem.
Scenarios is :
PO --> SO --> Invoice
I am creating the invoice with the medium EDI , when I click on Save button IDOC is generated with the message " IDoc 'xxxxxxxxxxxxx' was created and forwarded for transmission " and it showing the status as 03 i.e, The IDoc was sent to an R/3 System or an external program via a transactional RFC ...but the problem is if I got to the Purchase Order history Its not updated with the Invoice number.
What could be the problem , please suggest.

Hi!
I'm not sure, in which process you link PO and SO. There are some different ways, which are totally different scenarios - if you need help here, describe more detailed.
Your invoice is probably only created with reference to SO, so check the invoice itself. In this case also the SO history should include the invoice.
Regards,
Christian

Podcast List view not updated with iTunes 11.3.1.2

Podcast List view not updated with iTunes 11.3.1.2
Windows 7 Enterprise Service Pack 1 / Intel-i7 2.40 GHz / 8GB RAM / 64-bit
iTunes 11.3.1.2
After refreshing my Podcast list, some Podcasts with new episodes do not display the "Unplayed" blue dot.
If the podcast "folder" is expanded by clicking the triangle, the new episodes are shown with a "Unplayed" blue dot.
A new episode is shown in the My Podcast view, with the correct number of new episodes.
The new episodes are displayed in the All Unplayed view.
I've tried deleting all episodes and downloading new episodes from the iTunes Store.
I've tried Unsubscribing and deleting the podcast, then Subscribing again from the iTunes Store.
Neither attempt resolved the issue.
I've seen this issue for a while, and was disappointed to find no change with the iTunes 11.3.1.2 update.

it finally worked; got my Rush 24/7 downloaded, and it finally found my iPhone after switching from the USB 4 port Hub to a dedicated USB 2.0 slot on my laptop.

IPod not updating with iTunes

When I plug my iPod into the computer, it is not updating with iTunes.
The software version on iTunes is 1.2.1 and is the same on my iPod.
I did have a relapse last evening, as my iPod got confused. It stalled, so I had to drain the battery and recharg it. When I plugged it in today to the computer, it is not updating with iTunes - and I did update it to 7.1 version of iTunes, but the software version still says 1.2.1.
It also says my ipod is up to date with iTunes.
Please help.
Thanks,
Donnie

See if there's any help here.
iPod not recognized on a Windows laptop.
iPod not recognized on a Toshiba laptop.

While my iphone (6 plus) is synced with icloud, the contacts on icloud are several years old! My phone shows that it was backed up this morning to icloud. Any ideas on why icloud is not updated with my contacts?

While my iphone (6 plus) is synced with icloud, the contacts on icloud are several years old! My phone shows that it was backed up this morning to icloud. Any ideas on why icloud is not updated with my contacts?

Howdy Mishka2015,
The article linked below details a number of troubleshooting steps that can help resolve issues with your contacts and iCloud.
Get help using iCloud Contacts
https://support.apple.com/en-us/HT204150
Sincerely,
Allen

MIGO not updating with excise value.

Similar Messages

Maybe you are looking for