MIGO Print out

Hello,
I want to take printout of MIGO how to do this? is there any customizing needed for the same?

If you have Maintained Condition records in MN21 then you can take print out using MB90.
Please go thru the procedure and ensure you have done all the settings properly.
Output and Printer Determination For PO and GR  
How to configure the output determination and printer determination for both PO and GR?
The steps are as follows:
Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
*4. Message Determination Schemas*
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
Output of GR
After setting table, access sequence and output type for GR,run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document.
Now Run MB90, you can take printout. Output Type: WE03 or WE01 or WE02
Regards,
Ashok

Similar Messages

  • MIGO print out debugging

    Hi Folks,
    I have a requirement in MIGO and I have to debug the smartforms called, do you have any idea how I can make it? the setting is 4 printed immediately. I had set a breakpoint in the smartforms but nothing happens when I execute.
    Appreciate your quick response.
    thanks.
    Regards,
    John

    Hi Jb,
    Please try to use update debugger using below steps,
    Put a breakpoint in your driver program.
    In MIGO, before pressing the SAVE button start debugging.
    Press the SAVE button.
    Start the update debugging by Settings > Update Debugging.
    As soon as you continue in debugging, it would open another debugging session for the Update debugging. You can press continue and it would stop at your breakpoint.
    Regards,
    Prasenjit

  • MIGO GR Print Out

    Dear Guru's,
    I am facing problem while checking collective issue tick in MIGO via Display Material Document. When I click on collective issue message appears Output save and when I press enter it resets that check.
    Wats the actual problem. We are not facing this earlier. GR document and Movement Type are same as earlier and we take print out through MB90 by doing same as above.
    Also I have noticed that through MB02 material document contains that check (collective issue).
    This is really strange. I did not understand what is the problem. Can any1 help?
    Regards,
    RM

    Hi,
    This Problem can be overided by Maintaining the output messages in MN21
    Enter the Following Data
    Message type -- your Print Message type
    transaction event key.--We good receipt ,WA --issue etc...
    Print Version--Individual or collective
    Print Item--.Material Document(1)
    Partner Function -- VN
    medium--Print (1)
    DAte and time -- 4 (if you want immediately after Posting..
    Lanuage EN.
    KNow after double click on the item..or select the Item and click on the communication tab presnt at the top left hand corner.
    and enter your printer details and check the print immediately option.
    Hope so it helps
    Regards
    Anjanna

  • ¿Why Print out message in Migo get duplicateg when event 4 in MN22 is selected?

    Hello,
    I am not able to find out why the print out message get duplicate when I change event 3 to event 4 in MN22.
    when I do Good issues in MIGO and the message "ZVAL" is set in event 3 "Send with application own transaction" only one type of message is been trigger in , but if I change event 3 to 4 "Send immediately (when saving the application)" in MN22 all the message get duplicated.
    Thanks
    Jorge G

    Hi,
       If you are using your own program in the processing routines for output type, then change it to standard program and form routine in NACE  as shown below and test the scenario again. Also check whether any routine is assigned against the output type in the procedure - if so, remove the routine also.
       Revert back with the result. If its working fine in this case, you need to check the custom program with the help of your technical team.
    Regards,
    AKPT

  • Two separate Print out while MIGO transaction

    All,
    While doing MIGO, internal batch numbers are generated .
    While doing this transaction a GR slip is printed out with batch number , production date , expiry date , material code and many other informations with output type WE01.
    Now  business want while doing this transaction , a separate print out with only batch number , Production date and expiry date .
    These two separate print outs should automatically come while MIGO transaction .
    1. Is this possible ?
    2. If possible , which output type will be for the 2nd print out .?
    2. Any user exit required here?
    Kindly advise.
    regards

    Hi Sandeep
    1) Inventory Mgmt IMG->Output Determ..->Maintain output types
    Copy WE01 and create a new output type ZWE01.
    In processing routines, you need to change the program/form for your new output. Discuss with your ABAPer for this.
    2) In 'Maintain Output determination procedure', insert this new output type in 'Control'
    3) Maintain conditions as required
    After this, use WE90 to print both outputs.
    Best regards
    Ramki

  • Blocking print out put for a material in MIGO with reservation

    Dear Gents
    How can we block printing a particular material of a storage type from MIGO for reservation
    regards
    anant

    hi ashok,
    what is the output type you have assigned for the printing.
    in mn21 you create a output  type we03 with tr.event as we and print version as 3(collective slip ) at the time of Migo.
    print indicator as 1.
    you can also take the print in MB90.IN THIS you give the document no and processing mode as2 for reprinting and then execute.
    Regards,
    velu

  • Print out of Layout

    Hi,
    Need suggestion for getting print out put of GRN (in MIGO), Invoice verification (in MIRO) & service entry sheet. Request you to suggest on this.
    Regards,
    Ranjan

    Hi
    Check following are some of steps for GR collective printing from SDN only
    1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
    2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
    5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
    b. Print Parameter is 7
    6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
    7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
    Now the settings are ready for Printing Material doc
    8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
    Regards,
    Archit

  • Print out of GRN document.

    Dear All ,
                                  Kindly help me as user is in need to take print out of GRN document as collective slip I need to  take out printout of grn.the prinout should contain collective
    slip that is all item in one slip.
    the slip should contain line item no.,material description,material no.,quantity,rate,total amount and sum total amount of all items together in the last page.
    vendor name,p.o. no.,plant,invoice no.,invoice date,posting date,grn no.,date,location,payment terms. Pl guide that what config are to be done in SPRO .
    SAP12

    Hai,
    Run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document. Now Run MB90, you can take printout. Output Type: WE03 - Collective slip
    Note:
    Check following are some of steps for GR collective printing
    1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
    2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
    5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
    b. Print Parameter is 7
    6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
    7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
    Now the settings are ready for Printing Material doc
    8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately
    the slip should contain line item no.,material description,material no.,quantity,rate,total amount and sum total amount of all items together in the last page.
    vendor name,p.o. no.,plant,invoice no.,invoice date,posting date,grn no.,date,location,payment terms
    You have to add the requirements in the print out form - smart form with the help of ABAPer. You can find this smat form in T code NACE - slect ME Invenotry management - Output type - WE03 - Go to processing routines - form name.

  • GR slip print-out & automatic default for the print tick

    Hi,
    I have followed the steps as outlined below for the solution and unfortunately the GRN document do not print as anticipated. I was wondering if the non-assignment of the MM or FI Program might be the cause? Please advice if I had missed something to allow this to print immediately.
    1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
    2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
    5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, (for returns use WE03) ensure the foll:
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
    b. Print Parameter is 7
    6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
    7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
    Now the settings are ready for Printing Material doc
    8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
    Edited by: JML Nkgapele on Dec 1, 2008 11:10 AM

    Your answer did help but still expriencing challanges with the following:
    Output Types
    -Print Parameters options are as follows
        >Plant/Storage location
        >Plant/Storage location/User group
        >User exit
       >User parameters
       >User
    Please advice which of the above is appropriate?
    -Should there be a program reflected on change output field for General data screen?
    Please advice since I'm currently experiencing shotdumps(runtime errors) when processing the GR.

  • GR document print out

    Dear All,
    The user does goods receipt and the print does not comes automatically. It happens only in case of non stock items. Though I am not sure if there is any link with it but they have to go to MB02, then go to messages, put output type as WE03(GR Note Vers.3), select medium as Print output. Then only the system sends the document for print. And it is not the case with stock items. The goods receipt document for stock items goes for print automatically at the time of saving it.
    What could be the problem here? Or is there any way that the user does not need to put all this data and it comes automatically.
    Please suggest.
    Regards
    VT

    Hi,
    Check all the steps given below,
    1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
    Enter the local printer where you want to print your Goods posting document
    2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
    Here for Particular mvt type 101,201,121,311 etcu2026 Maintain the Print item as 1--Material document printout
    5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
    Select the particular Output type then goto Details
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Transmission medium is 1
    b. Print Parameter is 7
    6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc, Maintain the Output device for all your Plants
    7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
    Now the settings are ready for Printing Material doc
    8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
    Regards,
    Prabu

  • GR Note Print out not comming through MB90

    Dear Friends ,
    We are not able to take print through MB90 , for the Goods Receipt note -3 (Collective Print Out )  .
    Kindly guide me what corrections /changes I need to do.
    Thanks
    DGN

    HI,
    1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
    2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
    5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WA01,WA02,WA03,WE01, WE02 and WE03, ensure the foll:
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
    b. Print Parameter is 7
    6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
    7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
    Now the settings are ready for Printing Material doc
    8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately
    Regards,
    KK

  • GR slip print out

    Hi All
    We have a requirement to print collective GR slip for PO with multiple line items. I have setup the output type WE03 for the plant and storage location and it does print out a collective GR silp , but for this I have to change the version of the print manually in MIGO to collective from individual which is actually defaulted.
    Is there way I can have the collective version defaulted depending on the number of line items I have on the PO.
    please help
    thanks
    Vijay

    The only way to default this is to add a PID to the user via SU3
    NDR with value X is the parameter ID that represents the automatic population of the collective slip
    Regards
    Steve

  • Print out for Goods Issue 531

    Hi
    We need to take the print out of 531 mvt
    What are the standerd Setting needs to maintain for the same,
    Regards
    Niti Narayan

    hi
    Check following if useful to u
    1. Maintain the Printer Name in SPRO->Malt Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
    2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
    5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WA01, WA02 and WA03, ensure the foll:
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
    b. Print Parameter is 7
    6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
    7. Go to MN21, forWA01/02/03 and  Tr Type WA, Print Version 3, maintain Print Item as 1.
    Now the settings are ready for Printing Material doc
    8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
    regards
    KI

  • Print out of GR(Urgent)

    Dear Experts,
    I have got a requirement like this....
    When user does MIGO transaction,after saving a particular document immidiately user needs a print out of that Goods Receipt.
    Can any one tell me how to get this???
    Thanks and Regards
    MK

    Hi MK
    U can print GR
    Do the following configurations
    Pls check the below settings for material document Print out:
    Before of all RUN pgm RM07NCUS in SE38
    which will do all default setting automaticaly
    1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
    2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
    5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
    b. Print Parameter is 7
    6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
    7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
    Now the settings are ready for Printing Material doc
    8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
    For custom print You need to maintain below settings.
    2.5.3.1. Maintain Condition Tables
    Menu Path: IMG / Materials Management / Inventory Management and Physical Inventory / Output Determination/ Maintain Condition Tables
    Transaction: M703
    2.5.3.2. Maintain Access Sequences
    Menu Path: IMG / Materials Management / Inventory Management and Physical Inventory / Output Determination/ Maintain Access Sequences
    Transaction: SPRO
    2.5.3.3. Maintain Output Types for IM Documents
    Menu Path: IMG / Materials Management / Inventory Management and Physical Inventory / Output Determination / Maintain Output Types
    Transaction: M706
    2.5.3.4. Maintain Output Determination for IM Documents
    Menu Path: IMG / Materials Management / Inventory Management and Physical Inventory / Output Determination / Maintain Output Determination Procedures / Condition : Procedure
    2.5.3.5. Create IM Documents Condition Records
    Menu Path: IMG / Materials Management / Inventory Management and Physical Inventory / Output Determination / Maintain Condition Records / Create Condition : Inventory Mgmt
    Transaction: MN22
    Vishal...

  • Output Type assigning for GR Print out

    Hi,
    As after cresting of GR through MB01 or MIGO we are taking GR print out with T. Code MB90 in this we are entering only GR No. and Yaer and the print out is coming re. to Output type WE03 even though we are keepint output type  filed blank on the selection screen of MB90 .
      I want to confirm the required setting for How this can be set as defalut output type WE03, WE02 etc..
      regards,
        zafar

    Hi,
    In MN21 you matain condtion record for specific access sequence.
    Like plant/material/stor loc level or something different as per your requirement.
    If you maintain 2 diff. condtion types like WE01 and WE03  for same combination then system will trigger output for both in MB90 transaction if you do not give condtion type in selection screeen.
    Regards,
    Shailesh

Maybe you are looking for

  • How to make link open in new TAB and not new window

    Mac users can do the following... http://www.switchingtomac.com/tutorials/how-to-force-safari-4-to-open-links-in-a -new-tab-instead-of-a-new-window/ how can this be done for WIndows users? Using Safari 4.0

  • Outlook 2010 Calendar new appointments do not appear on BB Curve 9300

    I have my BB 9300 connected to BIS and I can see all of my contacts synchronized from my office Outlook 2010 but not the Calendar items. It seems thwy are canceled if they are older than 2 weeks appr.tly. What should I do to keep all my calendar Item

  • Sql query performance tuning

    Hi all, I am facing problem to extract data and insert into another table. I need to fetch part number from all_parts_already and then based on the result I need to extract place from all_parts and insert into all_parts_already. Sample data in the ta

  • How to fix managed server inconsistent state

    Hi, My weblogic domain contains 2 managed servers (not in a cluster) and one Admin Server. One of my managed servers has previously encounted a problem to start. The problem is solved for this managed server : now, I can start it with the startManage

  • Resizing an open Dialog as it's content's change

    Using the sharepoint dialog framework,  Is it possible to resize a dialog that is open when it's content changes? The issue we currently have, is we have many layout pages we designed to open in a dialog that use our Custom Master Page.  When sharepo