Migo reference document not appearing in miro for frieght conditions

Dear all,
I ahve done migo for a po and i have checked GR based invoice in PO.When i am doing MIRO i am not getting the migo reference number for frieght condition where as the migo reference number is appearing for base price.How to get that migo reference number for frieght conditions also.
thanks in advance
regards
vithal

Sometimes the the MIGO creator might have reversed the same. In such cases the reversal document may be with different number in the same series and both posted & reversed documents will not appear in MIRO. Since you might checking with posted document number, you are seeing the blank in MIRO. In such cases, just enter the PO number in MIRO, give date & reference number press Show PO structure button in the left corner. You will find the following screen
Expand the required once. The following screen appears. In this both positive & negative numbers with same reference & document type appearing are the reversed documents.
Hope this is clear

Similar Messages

  • Delivery Note not appearing in MIRO for DCGR

    Hi Friends ,
      I am facing a problem in MIRO . The Delivery Notes are not appearing for "Delivery Costs at GR"(DCGR) , while it comes for individual GR which u can see by Clicking the PO-History Tab . But when we check the PO-History in ME23 , there the Delivery-Notes gets reflected against DCGR .
       The users are facing a problem because they are unable to determine which delivery Cost is against which GR ( as the Delivery Note doesn't appear ) .
       Kindly reply as soon as possible , if any NOTES are to be applied or so .

    Hi Sudha,
    have you found solution for this prob? coz mine prob is about the same. but the different when they enter delivery note at material document GR at header, they put wrong number which is extra zero. i don;t know if this the factor coz invoice receipt not allowed to be process. i mean DCIR.
    Regards
    Aishah

  • Tax not calculated in MIRO for the condition type JVCD

    Hi,
    We made some new different tax code and attached with JVCD , its calculating in PO but in MIRO calculation part not done but for other condition type ,JVRD,JVRN system calculating well...
    Please tell me some way why not system calculating in case of JVCD and JVCN for capital case..
    Thanks in Advance,
    Dharmveer

    Hi,
    We totally agreed with you and already we checked our configuration part is OK.Actually we want to map some process where we captured excise in GR but no need to take credit i.e. to post the excise in J1IEX,so we do not have to post our cenvat/modvat entry in MIRO but we need to calculate VAT whether it is deductible or non deductible.So far this thing is concerned,we made separate tax code which we use at time of MIRO posting and in configuration we did not attached the tax code in logitics-basic excise -assign to company code. Because once we attached here , system asking to make to pass furst RG part2 entry then it allows to post MIRO entry which we do not want .So please understand this scenario is different and we got the success for JVRN/JVRD for VAT but getting issue in case of capital VAT where system does not calculate tax for JVCN/JVCD .....where we want to process MIRO without posting J1IEX..
    Please thing and analyse ..give some helping response..
    Thanks,
    Dharmveer

  • Vendor open items appearing in FBl1 but same documents not appearing F-44.

    Hi,
    Vendor open items appearing in FBl1 but same documents not appearing F-44.
    Please help me in this.
    Thanks
    GP

    Hi,
    F-44 is used for clearing vendor - header data. Check if there are both debit and credit entries for the vendor and if it exists then clear using F-44. Check the entries correctly in FBL1.
    regards,
    radhika

  • Documents appearing in FBL1 but same documents not appearing in F-44

    Hi,
    Vendor open items appearing (Documents) in FBL1 but same documents not appearing in F-44.
    I executed FBL1 with input values:
    Vendor
    Company code
    Open items
    Normal items
    I executed F-44 with input values:
    Vendor, company code
    OI check box
    None under additional selection
    Kindly help me in above case.
    Thanks
    GP

    Hi gangappa,
    For that first u check in F110 there u delete unwanted proposals through keep the cursor on run date field and select F4 there not yet complete proposals are available first delete that .
    Second option 
    check it is it any advance payment. if any acvance payment plz select special gl indicator in F-44
    May be this information is useful to you
    Regards
    Surya

  • Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
    In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
    After that is done reboot the machine and see if you can log in.
    If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
    Reboot and try again.
    If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
    Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
    Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
    Lots of work, but there is no Lion disks.
    https://discussions.apple.com/message/16276201#16276201

  • HT201240 This process does not appear to work for me.  I'm running 10.8.3.  I created a new user for a guest staying with me.  They have gone now and I am attempting to either change the password or delete the user.  It won't allow me to choose the user I

    This process does not appear to work for me.  I'm running 10.8.3.  I created a new user for a guest staying with me.  They have gone now and I am attempting to either change the password or delete the user.  It won't allow me to choose the user I created.  I am logged in as myself and it states that I am an "Admin".  The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users. 
    Can someone help me?  I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on?  What if this were my child?  This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
    Any help would be appreciated.  (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
    Thanks.

    Here are two screen shots to show you what I am seeing.  The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as).  The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue).  However when I click on the user "Orion" nothing happens.  It will not change to highlight that user.

  • IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

    PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore.  Just get an Apple Logo then a flashing blue screen as if it is caught booting up.   This has happened twice before and iTunes restore fixed it.  But this time device not appearing in iTunes.
    Running iTunes for PC.  But as stated restore has worked before!  Any help greatly appreciated!!

    Place the device in DFU mode and let iTunes restore the device to factory condition.

  • F-44: The Re-document not appear available to do the clearing.

    Hi
    Experts
    Hi,
    We need help to understand what hapen with the consult of vendor XXXXX
    When we consult this vendor on transaction FK10N we see the information detailed on the attached file.
    But when I try to do the clearing and try the transaction F-44, the re-document not appear available to do the clearing.
    But when I try to do the clear vendor on F-44 the documents ( 4000000419   1700000135 and 1500000456 ) not appear and I not understand why?
    But this Document No's are seen in FBL1N as a Open Items and also as a Cleared Items, But not able to see in F-44
    4000000419    06/27/2011
    1700000135    07/14/2011
    1500000456    03/30/2011
    Could you please help me with this issue?
    Anil

    hI
    Friend,
    I Checked SE11 REGUP table, if the documents You don't see by F-44 are already contained into a payment proposal.
    If Yes, You should delete the F110 payment proposal to see them by F-44.
    I deleted the payment proposal, even though Iam not able to see the docuements in F-44. what to do?
    I Checked the table BSIK and Also BSAK it is showing this docu nos.
    Anil

  • Monitoring info not appearing in console for one of the managed server

    Monitoring info not appearing in console for one of the managed server though server is running fine. It happens some times. I tried to get these info from executruntimeMBean, but that is also not returning any info for that server. The entry for that server get erased from running-managed-server.xml after some time. Any idea why?

    hi Arun,
    Please find the below diagnostic module config fom the condig.xml
    <server-diagnostic-config>
    <data-retirement-enabled>true</data-retirement-enabled>
    <wldf-data-retirement-by-age>
    <name>DomainHealth_WLDFRetirePolicy_m2ap5</name>
    <enabled>true</enabled>
    <archive-name>HarvestedDataArchive</archive-name>
    <retirement-time>2</retirement-time>
    <retirement-period>6</retirement-period>
    <retirement-age>1</retirement-age>
    </wldf-data-retirement-by-age>
    </server-diagnostic-config>
    This configuration was present earlier also, but it looks like the logs statrted accumulating recently due to some other changes made to console. There is nothing coming under the WLDF console extension in server admin console.
    Other than changing the start script, will it be fine to go the file location ./server/data/store/diagnostics/WLSDIAGNOSTIC**.DAT and delete the older file while the server is running now?
    Incase not posisible , an example on the change in startscript and the config.xml will b helpful
    thanks
    JZWL

  • TS3716 iPod classic does not appear in iTunes for Mac since updating to 11.0.

    iPod classic does not appear in iTunes for Mac since updating to 11.0. It appears on the desktop and iTunes starts up when the iPod is connected, but it does not appear in a form so that I can manage its contents.

    Mike:
    Just had the very same problem.  iPod Classic shows up on my desktop but not in iTunes (11.0.1).  I tried restarting iPod while connected as suggested elsewhere.  Didn't work.  What did seem to work however was, while the iPod is connected (and on the desktop) restart iTunes.  Once it restarted it was there and synching.  I also, before restart, made sure that auto-synching was set up in iTunes preferences (under devices).
    Try this.  May work for you as well.

  • ADC for Domestic Purchase not flowing in MIRO for particular MIGO Document

    Hello Experts,
        We've a scenario in which we pay ADC to domestic vendor. The procedure we follow is as below:
              1. Condition record for JAOP with 0% rate maintained in FV12.
              2. PO created with JMOP 10%, 2% ECS, 1% SECS & 4% VAT.
              3. During MIGO (also excise invoice capture), AED value is maintained
              4. After J1IEX, at the time of MIRO this ADC along with other duties flows in simulation
        Now in my case, there are number of GR documents for which MIRO is performed, but for particular GR, ADC is not flowing in MIRO and also excise duty is incorrect, it's not flowing from GR.
       So what is the probable solution for this, I've already checked MIGO & excise invoice documents & found to be ok.
    Thanks in advance
            Amit

    Hi,
    Have you maintained material price including AED price??
    If yes then check whether you have maintained JAX1-100% or not?
    I think this should be treated as a dealer purchase as you are maintaining 0% amount for JAOP.
    Regards,
    Piyush

  • Reference Documents not display in MIGO

    In some MIGO Documents Numbers the Reference Document (LFBNR) has not been display but its picks from the sap itself.
    I have made the MIGO & MIRO ACCOUNTING DOCUMENTS REPORT in which i pick the data from EKBE. I used the following feilds:-
    EKBE (LFBNR)
    EKBE (LFGJA)
    But for some MIGO documents in which the reference document is not been display has not update the values in this field so anybody tel me why its not updated??
    Thanks,
    Sumit.

    Hi Sumit ,
    EKBE-LFBNR will be updated only if any reversal documents are created .
    regards
    Prabhu

  • Profit Center is not appearing in MIRO

    Hi,
    I have raised purchase order for asset. While doing MIRO with reference to purchase order profit center is not appearing. I check MIGO document profit center is appearing in MIGO document. 
    I have maintained profit center in Material Master.
    OKB9 setting is required for ASSET??????
    Please help
    Regards
    Amit

    Hi
    We are using ECC 6 with document splitting. I have check field status for GL . Profit center is already optional field
    Regards
    Amit Hingne

  • Excise values not appearing in MIRO

    Dear All
    I have  created a PO , Made GR  Part 1,2 has been captured ,
    Due to some reasons we cancelled the GR , then we made a new GR for that PO
    Now i get in to MIRO i am not getting the Excise Conditional values , i get only my VAT values.
    Kindly throw light  on this 
    Regards
    R.Rajaram

    Hi,
    Cancel the excise invoice which was posted at the time of previous GRN. Then again post the excise invoice with reference to new GRN Then the excise amount will appear in MIRO.
    Regards,
    Prashant

Maybe you are looking for

  • How do I keep the songs I purchased on my mom's account on my ipod after I sync my ipod with my new account on my new computer?

    So my family generally uses one Itunes account. I recently got my own credit card so I decided to open up my own Itunes account so I didn't have to ask one of my parents to put in the password every time I wanted to do something related to the itunes

  • Webi - store report in Variable filename.

    Hi, I have BO Webi report say XYZ which is schedule and run on weekdays. once it is refresed I  wanted to give name as XYZ_YYYYMMDD.XLs ( where YYYYMMDD is system date). in CMC there is option to name the report with some extension ( CMS-> Folder->Sc

  • Spry Accordian 2nd Panel Does Not Work in IE 8

    Anyone have a suggestion on this. I created a two tabbed according panel to show content below and image using the XML data set feed to dynamically insert content. The content for the first panel shows up nicely and so does the tab for the second ite

  • Cant connect icq in messages

    tried login icq but messages always says wrond id or password i'm using aim protocol with icq number and accountname as server login.icq.com port 5190 ssl unchecked anyone had this problem before ?

  • Log In Failed - Enter New Password

    Hi Guys, I've been using TB for a while now, along with the several email accounts, including: Hotmail, Outlook, Mail.com & to a lesser degree Supanet !? Every now and then, when trying to Send, I get the message "Log In Failed - Enter New Password".