MIGO screen display settings

All,
After going to MIGO screen ,below 'show overview' , we can find the field where we can select Goods Receipt or Display etc .
In my setting its coming as 'A01 Goods Receipt' , A02 Display' etc .
How to make the settings so that I can remove 'A01' , 'A02' etc
Kindly advise .
regards

Hello Sandeep,
When you open MIGO transaction, you will find colurful button (Customizing of local layout) beside help button, click on that and select Option, it will open popup screen, click on expert button, Uncheck both indicator in control Box .
Hope this helps
Regards
Arif Mansuri
Reward if answer is helpful.

Similar Messages

My screen display settings don't work right

My screen display settings don't work.When i try to set to not sleep it still sleeps.When i set to sleep and show pictures it works for a few mins then sleeps and won't scroll my pics at all just a black screen.Why? Does anyone else have this problem?

Screensaver (e.g., showing pictures instead of the desktop) and Display Sleep and Computer Sleep are all set independently. You need to be sure that you have set each and every one of these correctly or you will get unexpected results.
There is also the ability to require a password after an interval, and that is also independent of all the others, and is in
system preferences > security.

How to enter bios Setup (not the F1 stuff, the splash screen display settings)

So I some how got into a seperate bios setting program by pressing ctrl S when some other bios utility was loading and changed the splash screen display (how long it shows the press enter stuff)
but now I have no idea how to get back into that configruator.
the Manual doesn't mention it, so question, how do I bloody do it?
T430S 2542 btw

Hello
Every time when you switch the notebook ON you can see at the bottom left hand site the short instruction how to enter BIOS settings. In your case you must use F2 button. Please keep it down immediately after switching the notebook ON.
Generally the Toshiba notebooks are delivered with two different BIOS versions (BIOS producer):
- TOSHIBA BIOS: enter using ESC and F1 button
- Phoenix BIOS: enter using F2 button.
According the specification your unit has Phoenix BIOS.
Bye

MIGO Screen - Mvt Type 411 Q - change DEST material field as display

Hi Guru
We have client who would like to utilize movement type 411 Q (Transfer posting from project to own stock ) in MIGO screen.
The standard SAP MIGO screen does allow user to input material number at both "FROM" and "DEST" column.
User claimed that they wanted to block the input of material number field in DEST column (only allow display)
Could you please advise how to configure this display field which is only for movement type 411?
Please advise
Lyonie

Hi Lyonie
U can block the input material field in DEST column by doing the following changes.
Goto-SPRO-Materials Management-Inventory Management & Physical Inventory-Settings for Enjoy Transactions-Field Selection per Mvt Type
Select the field 411 UMMAT & Delete this entry.
Now check in MIGO transaction for 411 Movement type ,the input material number field in DEST column cannot be changed
Regards,'
Satpal Mujawar

My screen will no longer turn on, how do i reset my display settings on mac pro

Hi, i'm using a mac pro and cinema HD display, the display was usually set to using the power button on the side as an actual power button, i decided to change it to turn computer sleep mode on and off and it still worked fine whilst it was on, i then turned the set off for the night, the next day the screen did not come on with the computer and i cant turn the screen on becuse the button is set to sleep the computer. Any way to reset my display settings or turn my screen back on?. thnks

nevermind solved

My imac screen display is unfocussed, odd coloured and blurred (caused by rogue cate walking over keyboard). I have no idea what settings have changed or what to check. Any ideas?!

My imac screen display is unfocussed, odd coloured and blurred (caused by rogue cate walking over keyboard). I have no idea what settings have changed or what to check. Any ideas?!

It could be a number of keyboard shortcuts, here's a few.
If the screen is zoomed, hold CNTL and scroll down with mouse or trackpad.
If screen looks like a negative, hold down CNTL OPT CMD and click 8.
Let us know how what other symptoms are shown.
Regards,
Captfred

How do I revert my display settings without being able to see the screen?

I am using an Emerson led tv as a monitor, and when I tried to adjust the display settings to get a better resolution,I chose a resolution that wasn't supported. Now it is telling me to change the settings, but I can't see the screen anymore.

Reset the PRAM, as per > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.

Nvdia geforce display settings not avilabe in screen resolution

I bought a NEW HP 15 r0022tx note book i am having windows 8.1 64 bit operating system
i just installed a nvdia driver. when i open the screen resolution it showed that display is using intel hd integrated graphics.
and i uninstalled the intel hd graphics driver and restarted my pc. but I am not able to see nvdia display graphics option neither in screen resolution settings nor in nvdia control panel.
Please help me(reply me) fast....

Hi @v95 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue with your HP 15-r022tx Notebook and issues with the graphics card. I would do a system restore.
Once that has completed I would just go to the Device manager right click on the drivers for the graphics card and update the driver.
If this does not resolve your issue please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link to get the support number for your region. They will be happy to assist you immediately.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How to reset display settings? 120 hz over HDMI on 2014 MBPr makes screen go black

Hi, I have a 15" 2014 MBPr with the 750m. Recently, I bought a TV, a vizio M422i-B1. One of my main reasons for buying the TV was to use it as a third display for my mac. I have two displays already connected, a 27 inch 1440 display over thunderbolt, and another 23" display that is 1080 and connected over the other thunderbolt.
I got the TV mounted above my desk, and ran an HDMI down from the TV to where I put my laptop, and plugged the TV in to the computer in the HDMI port on my mac.
It worked, but the refresh rate was set at 60 for the TV on my computer, but since my TV is 120Hz, I set the refresh rate in display settings to 120. It worked fine, and the mouse movement on the TV was more normal looking, so I was happy.
I put the computer to sleep a little later, and came back, and it wouldn't wake up, even after disconnecting all the displays and other peripherals, it would not wake. I restarted the computer, and with nothing connected it rebooted and worked normally.
I connected everything one by one, USB stuff first, fine. 1440 display over thunderbolt, and everything was fine. same with the 1080 display.
I went to plug in the TV again, and everything went black. I had to restart the computer without the TV plugged in to do anything. Restarting with the TV plugged in to the mac doesn't fix anything.
I know my issue is the refresh rate for the TV being set at 120Hz, and I have to change it back to 60 Hz, my problem is that as far as I know I have to have the TV plugged in to change the refresh rate, but if I plug the TV in it kills the computer. Is there a way to reset the display settings so that it doesn't "remember" that I want the TV to be 120Hz?

Did you ever figure this out?

My HP2311 will not keep the detect display settings, it flips off and I cannot see my screen and have to "detect" over

My mac mini with 10.9.5 will not keep my monitor on the proper setting. I have to go into display settings and "detect monitor" again and again. How do I lock it in place? Does anyone know why the monitor detection keeps "slipping off". thank you in advance Deb Mc

I forgot to mention my monitor is an HP2311 and it always kept its setting until the most recent operating system update.

Excise invoice tab missed in migo screen for import material

Hai,
What we had done,
1 we raise import po.
2 we posted MIRO for custom invoice purpose,
Next when we are doing Migo entry Excise invoice tab is not display.
What is solution for this issue ?
What we have checked.
1. J1id all combinations, means Chapterid with material, cenvat determination, vendor excise details, Excise indicator for plant,
Excise tax rates.
2.At the time of po they ticked invoice base.
3 We checked movement type 101 for excise duties.
4.we checked excise group also in this Excise invoice captured is ticked.
5.. i also checked table for movement type.
Note: Against this material master no entry is there so this is first time material.
Relating to this vendor previously we have entries relating to other material masters.
What is solution for this issue ?
Why it is not displayed in MIGO Screen ?
Regards,
Basha.

Check the following
1. Chapter id maintained in material master or j1id.
2. Cenvat determination maintained
3. Tax indicator for plant and vendor.
4. Import conditions rightly classifed under defaults.
5. Movement type rightly classified
6. In case you have created a new plant check for following in the client you are doing the transaction
IMG>>Logistic-General>>Tax On Goods Movements>>India>>Basic Setting>>Maintain Plant Settings
7. Check if you have not done any enhancements, some times this may happen if any enhancement done.
If all this is checked and in order it should work.
Regards
Sangeeta

Display settings in System Preferences acting up

I'm having trouble with my Display settings under System Preferences. I am not using an external monitor. My display seems to be working fine, but when I open Display settings to change resolution and colour, weird stuff happens. Basically, I cannot use this preference pane at all.
My display is 1920x1200, but when I open the Display settings, I get two windows, one telling me that "I am about to change [something something], some applications cannot display information correctly if the screen has less than 800x600 pixels", and the other one, the usual main window, telling me that my resolution is now 640x480 (it isn't).
If I hit OK in the extra window that pops up, my resolution changes to 640x480 or something similar, and I am unable to change back unless I reboot. Also, in the main Display settings window, it says <<< DO NOT LOCALIZE >>> under the list of available resolutions, as well as << do not localize >> in the box where I can change refresh rate. None of the buttons seem to be working.
Does anyone have any idea what is going on here? This was working just fine when I received my new MacBook Pro a few days ago, but now it's not. I've been repairing disk permissions and rebooting, etc.
I have been installing the trial version of Adobe CS5, but had massive problems with this installation (as a lot of people are reporting with CS5 and Snow Leopard...) and uninstalled them again, cleaning out Adobe preference files. Could I have deleted some other important files by accident in this process?

Quit System Preferences, then delete these files or folders.
Users/yourname/Library/Preferences /com.apple.systempreferences.plist
Users/yourname/Library/Preferences/By Host/com.apple.systempreferences.xxxxx.plist and com.apple.PrefPane.Network.xxxxx.plist (the X's will be numbers)
Also, Users/Home/Library/Caches
Now relaunch System Preferences. Let us know.
-mj

VGA CRT will not "wake up".. help please. Reset display settings shortcut?

Hello everybody,
I have a mirror drive doors G4 Tower, Dual 1.25 GHz.
I have an ADC and a DVI out from the computer. Just had damage to my old studio display so I am attempting to use just one CRT running from the DVI... w/ a DVI to VGA adapter.
The first time I tried this w/ a CRT it worked fine... I played around w/ monitor settings... still worked fine. Shut down... unhooked CRT and moved that CRT away.
Tried using it with another CRT and the new CRT never started up... remained on stand-by/sleep.
I tried with another moniter... this time a LCD/Flatscreen... again VGA and it did the same thing, EXCEPT... this time when I connected the LCD to the adapter and then plugged the adapter into the DVI on my tower the LCD screen would turn on for about 1 second and display my login page. The picture was not perfect though... it was distorted someway.
Went back to the first CRT... now this one didn't work.
I think that maybe I have to reset my display settings with some sort of shortcut or something... maybe it's on the wrong frequency?
I don't know... any help much appreciated. I hate having to use this PC.
Thanks,
James

Turned out to be a faulty DVI to VGA adapter.

VGA CRT will not "wake up"... help please. Reset display settings?

Hello everybody,
I have a mirror drive doors G4 Tower, Dual 1.25 GHz.
I have an ADC and a DVI out from the computer. Just had damage to my old studio display so I am attempting to use just one CRT running from the DVI... w/ a DVI to VGA adapter.
The first time I tried this w/ a CRT it worked fine... I played around w/ monitor settings... still worked fine. Shut down... unhooked CRT and moved that CRT away.
Tried using it with another CRT and the new CRT never started up... remained on stand-by/sleep.
I tried with another moniter... this time a LCD/Flatscreen... again VGA and it did the same thing, EXCEPT... this time when I connected the LCD to the adapter and then plugged the adapter into the DVI on my tower the LCD screen would turn on for about 1 second and display my login page. The picture was not perfect though... it was distorted someway.
Went back to the first CRT... now this one didn't work.
I think that maybe I have to reset my display settings with some sort of shortcut or something... maybe it's on the wrong frequency?
I don't know... any help much appreciated. I hate having to use this PC.
Thanks,
James
G4 Dual 1.25 Mirrored Drive Doors Mac OS X (10.4.5) Some NvDia card
G4 Dual 1.25 Mirrored Drive Doors Mac OS X (10.4.5) Some Nvidia Graphics card w/ DVI to VGA adapter

Can you start up in "safe mode"? If so, you can reset your display settings and reboot. If not, you have a problem either with your video card or your DVI/VGA adaptor

Monitor says VIDEO MODE NOT SUPPORTED after changing display settings

HELP! I am about to have a nervous breakdown with my mac mini! I hooked up the mac to my Philips LCD via DVI. No problem at all. But because the screen is only 15" I wanted to play around with the display settings a bit. So I changed the resolution from it's original 1204x768 to the one higher (not sure of numbers) and to my HORROR, I now can't get any picture at all - it says "VIDEO MODE NOT SUPPORTED". I have tried everything I can think of. I have rest the P-RAM, I have unplugged all cables, plugged the back in again, I bought the mac into work and hooked it up to my monitor and changed the resolution back to 1024x768 which is what it was on originally and that STILL didn't work. I can see the Apple logo and then it goes black and comes up with the error message. HELP! What am I doing wrong - I can't believe one click of a mouse button has rendered my display useless!!!

Welcome to Apple Discussions!
Try booting the mini without the display connected, and then, once the system is running, connect the display. This will often force the system to default to a low resolution, and then correctly detect the display when it is connected.
If that doesn't help, with the display connected, boot into safe mode (hold the shift key down when starting up) and once the system is running, change the resolution to 1024x768, and ensure the correct refresh rate is selected. Rebooting normally ought then to give you a good display.
If all else fails, boot into safe mode with the display connected, and then in the Finder's file menu, use the 'find' option to search for 'windowserver' (no quotes). You should get 2 or 3 results, including one with a string of alphanumeric characters. Move all of them to the trash and restart normally.

MIGO screen display settings

Similar Messages

Maybe you are looking for