Migo screen get terminated
hi
im using cin conditions in po,but im not getting those values in gr in excise invoice tab.im getting the excise invoice tab and not getting values.migo screen goes terminated.when im checking document is ok but im posting screen get terminated.pls guide me quickly.
Hi,
In MIGO excise value not flowing , may be following reasons, just check..........
Did you specify which condition types is used for which sort of tax which applies to condition types that can be use with the new excise determination method. 1st check your entry of excise condition types in the flowing path:
SPRO --> Logistics general > tax on Goods Movements>India > Condition-Based Excise Determination> Classify Condition Types
Now again check did you assign tax code to company code in following path:
SPRO --> Logistics general > tax on Goods Movements>India > Condition-Based Excise Determination> Assign Tax Code to Company Codes
Note: Did you have all excise value details in the PO( check in invoice TAB), Just check cross check tax code in FTXP and check condition record in FV13
For migo screen getting termination, check your authorization to post excises.
Also check number range setting for object j_1irg23a1 & j_1irg23a2 in SNUM, if not select your Excise Group and maintain number range for the current year for object j_1irg23a1 & j_1irg23a2.
Regards,
Biju K
Similar Messages
-
Excise Tab not appearing in MIGO Screen but getting posted with EI Entry
Hi ,
I am excuting CIN ......While doing MIGO, Excise tab is not apearing nowhere in the MIGO screen but entries are being created successfuly in MIRO and posted as well, Entries ....
GR/IR Clearing A/c Dr
RG 23 BED A/c Dr
RG 23 Ecess A/c Dr
RG 23 SHEcess A/c Dr
Vendor A/c Cr
Can any one help me and provide solution for this.
Thanks
SukantHI,
Check your excise group settings, in it check migo settings.
You need to mark tick in all boxes
EI capture
Post EI in MIGO
Duty differenc at GR
EI create/RG23D selection
Update RG1at MIGO
Also check in J1ID trax for the Po material chapter id is maintained.
Regards
KK -
Excise Tab not appearing in MIGO Screen
Excise Tab not appearing in MIGO Screen
Reg
SunilHi,
For GR, which movement type you are using...?
If it is 103, you will get the excise invoice tab only in 105 GR.
If it is 101 only, check the following configuration.
SPRO-Logistics General-Tax on goods movements-India-Business Transactions-Incoming Excise invoices-Specify which movement type involve excise invoices.
Please revert for further analysis.
Regards,
Siva -
Hi ,
I want to add a Tab in MIGO screen , i have adde but i have to display it based on certain conditions like Order Type or Something.
then i have to save the fields on that tab in a Ztable
Thanks
Nikhilhi
take help of your abaper , go for SCREEN EXITs
search for screen exit MIGO on net you will get the details
check badi MB_MIGO_BADI
Edited by: Kunal Ingale on Jan 10, 2011 1:30 PM -
Hi Experts,
I have implemented BADI MB_MIGO_BADI.
Using Method PBO_DETAIL I got the screen
I have added custom field kitting code
i am getting kitting code data from Purchse order.
In EKPO Table kitting code indicator is a custom field
I have added custom field in MSEG table Using structure : CI_COBL
Now at the time of goods movement i have to get kitting code data from EKPO table
and display. after saving it should be updated in MSEG table Against PO number and PO item number
Pls guide me what methods i have to use and sample code if possible..
Thanks & Regards,
VinayBasically check your subcreen has large dimensions than sub csrenn you have created.
Actually in standard transactions SAP gives subscreen areas in which wwe call our subcsreen
problely check the subscreen dimensions..which you called in that sub screen area
also please check the link
add two fields in migo screen
Regards
Satish Boguda -
I use a 10.8 system and can not get Terminal or Textmate to accept my password by that I mean, neither will even allow me to TYPE it in.
I need this to edit hosts files. I've used Macs for years but am not that wise on the inner workings. HELP!?If you type a password into Terminal it will not appear on the screen at all, just enter it and press return.
-
Regarding exit for MIGO screen
Hi,
The requirement is: I need 3 additional character fields in MIGO transaction which my customer want to enter at the time of doing GR through MIGO. At the time of save they want those three fields to be capture in a table to store. Later they want to print the details if they take the prointout of GR.
Please tell me the procedure to add the three char fields to add to migo screen and the exit name to capture the details at the time of saveing the GR.
Thanks,
kishoreHi Kishore,
Check the BADI MB_MIGO_BADI in se18.
Read the documentation in se18 for that BADI and then proceed as suggested.
Also, search the forum with that BADI name to get more help.
Regards,
Ravi -
# Question
When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box, but goes to some random collection of pages often from months ago. Very frustrating - can anything be done to COMMAND it to save current pages and re-open there? (As I said, I have this box checked in the options, but it does not work ..Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode? -
Restarting dunning notice printout was getting terminated.
hi All,
We are trying to restart a dunning notice printout which was terminted earlier. when we are restarting it and it is getting terminated.
Can any one let me know what would be the reason.
Waiting for your earliest replies
Thanks and Regards
SriHi
I have created the Customer Accounts & posted Entries in it also .....But....When i am doing the Dunning process I am not able to go for the Editting option,in the sequence, & i am not getting the dunning history also,
I am not getting the Sample Printout Screen also.
My customers are not getting cleared
Can u please explain me what went wrong & can u rectify me please.
Thanks & Regards. -
Customer screen get populated in activity management
hi any one can help me out in this pls.
my client requirement is customer screen get populated in activity management.
my client using activities in crm.They configured customer sceen in activities.In that they have fields like contract validity, type of contract etc.
how it will get populated when they enter customer number.hi
can u please elaborate ur requirement what exactly we mean be population of activity screen,i din get exactly
best regards
ashish -
Excise invoice tab missed in migo screen for import material
Hai,
What we had done,
1 we raise import po.
2 we posted MIRO for custom invoice purpose,
Next when we are doing Migo entry Excise invoice tab is not display.
What is solution for this issue ?
What we have checked.
1. J1id all combinations, means Chapterid with material, cenvat determination, vendor excise details, Excise indicator for plant,
Excise tax rates.
2.At the time of po they ticked invoice base.
3 We checked movement type 101 for excise duties.
4.we checked excise group also in this Excise invoice captured is ticked.
5.. i also checked table for movement type.
Note: Against this material master no entry is there so this is first time material.
Relating to this vendor previously we have entries relating to other material masters.
What is solution for this issue ?
Why it is not displayed in MIGO Screen ?
Regards,
Basha.Check the following
1. Chapter id maintained in material master or j1id.
2. Cenvat determination maintained
3. Tax indicator for plant and vendor.
4. Import conditions rightly classifed under defaults.
5. Movement type rightly classified
6. In case you have created a new plant check for following in the client you are doing the transaction
IMG>>Logistic-General>>Tax On Goods Movements>>India>>Basic Setting>>Maintain Plant Settings
7. Check if you have not done any enhancements, some times this may happen if any enhancement done.
If all this is checked and in order it should work.
Regards
Sangeeta -
Background Job " RDDVERSI" getting terminated
Hi gurus,
When we check in SM37, We are seeing a background job that is getting terminated. In the job log it says DATASET_NOT_OPEN, Job cancelled. It is trying to run "RDDVERSI" program.
It is creating a Dump in ST22 and when we check the Dump in ST22, it says "The file "/usr/sap/trans/tmp/D01V985854.P01" has not been opened".
I checked the log in the trans directory and it gives me following error. Path of the Log "usr/sap/trans/log/D01V985854.P01".
1AEPU320 See job log"RDDVERSI""07435800""P01"
1 ETP184 CREATE VERSIONS BEFORE IMPORT
1 ETP110 end date and time : "20070912074448"
1 ETP111 exit code : "12"
1 ETP199 ######################################
1 ETP199X######################################
1 ETP184 CREATE VERSIONS BEFORE IMPORT
1 ETP101 transport order : "D01K985854"
1 ETP102 system : "P01"
1 ETP108 tp path : "tp"
1 ETP109 version and release : "340.16.24" "640"
1 ETP198
1AETR012XProgram terminated (job: "RDDVERSI", no.: "07460000")
1AEPU320 See job log"RDDVERSI""07460000""P01"
1 ETP184 CREATE VERSIONS BEFORE IMPORT
1 ETP110 end date and time : "20070912074651"
1 ETP111 exit code : "12"
1 ETP199 ######################################
I think when it is trying to import a transport request, it is trying to create a version of it and it is not able to create that.
Can anybody help me in solving this problem?
Any Help is appreciated
Regards,
Swaroop.Can you run this program in the foreground with a user that has the same permissions. If you get an authorization error again, check with transaction se53 on which objects you are missing authorization.
For these objects you can create an additional authorization profile...
Kind regards,
Mark -
How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit -
How can i set a layout for MIGO screen
Hello all,
How can i set a layout for MIGO screen. & make that layout default. Like i want to drag Requistioner column next to quantity in MIgo screen. temporarily I can drag but is there a way to save as layout & save it.Hi
First you arrange however you want and then go to table settings which is there in the right corner of the item details and create a variant and save.
Find a button with blue yellow and white at the top end above the vertical drag bar when put the cursor it will show you as Configuration.
After creating the variant tick the check box use as standard setting below the variant
Hope it helps
Edited by: Girish Adaviswamy on Mar 3, 2010 1:27 PM -
Error while working in MIGO screen.
Dear Members,
I am encountering an error, while trying to receive goods in MIGO, Here are the list of screen shots regarding the error. Kindly assist me to correct the mistake to correctly make the MIGO.
Kindly let me know any supporting or configuration document, so i can check and correct the mistakes.
1.
2.
3.
4.
Kindly assist me on this asap.
Regards : KarthikeyaHi,
The accounting entry at the time of MIGO is
Raw Mateial account dr
to GR/IR Clearing account
For Raw materials or inventory transaction key is BSX and GR/IR Clearing is WRX.once you please check the combition of (WSCA BSX US01) whether the G/L is assigned if not please assign.then relogon to the MIGO Screen then it will allow
Regards
Chakri
Maybe you are looking for
-
Confirmation of Production order with out goods issue
Dear All In one of the post the solution is given as below. "<b>Try using user exit "EXIT_SAPLCORF_102" to check goods issue at the time of confirmation using CO11N.</b>" But .. 1. How and where to find this user exit 2. What code to add inside this
-
The wonders of screen sharing!
I finally got it working after I realised that you have to deselect Firewall 'block all access'. Two Macs can share each other's screens - bizarre - see for yourself: http://homepage.mac.com/jmshaw/PhotoAlbum48.html
-
Data source doesn't show porper data while flat file data loading
Hi Experts, I am trying to load data from flat file for info object 0GL_ACCOUNT. I have created an application component and data source. My question is after loading text data in the corresponding data source, it shows only few characters of the act
-
Iphone syncing 1 hour off?????????
I am trying to sync my calender with Outlook 2003 basic. All of my Outlook appointments are showing 1 hour later on my iphone and some of the iphone appointments are showing 1 hour early on Outlook. I am totally lost. I have checked time setting and
-
Today is April/1/2010. When I try to do MIGO then get message that "posting period of 10/2010 not open". What I need to do to avoid error?