MIGO screen problem

Hi,
  In MIGO screen Excise invoice tab page, Subcontract challan option not displaying. Can anyone give some suggestions to solve this issue.
Thanks.
Regards,
Dharma

Hi,
Check whether Subcontracting Attributes are maintained for Excise Group or not?

Similar Messages

  • Batch determination not working during goods issue in MIGO screen

    Hi,
    We have configured search strategy according to shelf life expiration while doing the goods issue with movement type 201, 351 etc. Now when I do goods issue in MB1A for movement type 201 or in MB1B for movement type 351, by entering the * and clicking enter, system proposes the batch nos of the material according to the shelf life expiration. But when I do same procedure in MIGO screen, while entering * in batch field system does not propose the batch nos., instead it gives error as "use of special characters are not allowed"
    How the above problem can be resolved?
    Thanks in advance,
    Satish

    Thanks Aroop & Jurgen
    I have done the settings as per your suggestions by maintaining the Stock Determination Group. However It picks the batches as per FIFO and not as per shelf life expiration. Also same is the case with MB1A or MB1B.
    The reason I wish to use MIGO instead of MB1A or MB1B is as follows
    Suppose STO is made of say 10 line items (all Batch managed items). Now while issuing the goods, say for the seventh item there is no stock available then I can not bypass this item (it asks for enter the batch no. even though I change the quantity to zero) and I have to abort the complete transaction. But in case of MIGO I can bypass this item by unchecking the item OK check box.
    Any inputs on the above will be helpful.
    Thanks,
    Satish

  • Error Goods Receipt MIGO Screen

    Hi everybody,
       When I am do PO Document in MIGO Screen the following error will come  at every po
    "Deficit of Stck w.vend.unr.prev 150.00 PC : MAT261910 8220 HY12345678..."
    Why this error coming every po?. How to solve this problem?
    anybody tell me this is very urgent?
    Thanks
    S.Muthu

    John the idoc is WMMBID02 the message type will be WMMBXY
    it contains three segments E1MBXYH, E1MBXYI, E1MBXYJ
    Posting program will be RBDAPP01
    The standard posting program RBDAPP01 is scheduled to run on a regular basis.
         If the field is set to process immediately in partner profile inbound parameter. The RBDAPP01 program will read the process code (WMMB) in the partner profile and it will create an application document.
    The process code WMMB will contain the function module (L_IDOC_INPUT_WMMBXY)
    u would have known  how to creat partner profiles

  • How to control serial no in MIGO Screen?

    Hi Abapers ,
    I have problem for the receiving the goods in migo screen . But user can change the serial number. but I don't want to change the serial number. in MIGO Screen.
    is there any user exit OR enhancement of MIGO Screen?..
    i will give reward points. this fvery urgent.....
    thanks
    regards,
    s.muthu.
    Edited by: Subramaniyan Marimuthu on May 28, 2008 10:06 AM

    Hi Suyong,
             I talking about migo screen when u goods receive based on production order, it will show the seperate tab screen for serial number.
    That screen user can change the serial number. But I don't want to change the serial number.
    how do i control when user give wrong serial number in migo screen?.
    please explain me.
    Thanks
    regards,
    s.muthu

  • Disable Serial Number Field in MIGO Screen

    Hi all,
      I want Disable Serial Number  field in MIGO Screen how do i disable ?
    is there any user exit or enhancement ?
    Anybody please tell me.
    Thanks
    Regards,
    S.Muthu.

    S. Muthu
    Apply Transaction Variant and Screen Variant through transaction SHD0 for MIGO. Hope it will solve your problem.
    Otherwise, discuss this requirement with MM Functional Consultant. In SPRO, it may have some setting to make it display...
    Thanks & regards
    Amol Lohade

  • How to How to install ATI Radeon HD2600 driver on bootcamp 3.0 windows 7 partition w/black screen problem

    Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update  to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
    The Background/history
    I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8.  I created a single partitioned drive to install windows 7 professional 64 bit.  The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in.... 
    The installation of Windows 7 Pro 64-bit
    So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black....  in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
    The problem, re-emphasized :  I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files?  not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run...  Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver  without having been able to complete the windows 7 installation because the monitor goes and stays black????
    This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
    Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
    ---I've been told to install the osx dvd and run "setup.exe"  - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
    ---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/  for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
    ---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!

    hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something?  if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean?  it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
    Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this?  just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600?  (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
    So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
         1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
         2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc?

  • Trying to update OS to fix White Screen problem.

    Hello, I have had my Blackberry 8520 on a Virgin contract for about a year and a half now. Recently it has started randomly just changing to a black white screen that won't allow me to turn it off or perform any functions. The way I temporarily fix this is to plug it into the charger which acts like a reboot and brings it back to normal (pulling the battery to reboot it just restores the white screen after loading). In trying to find the resolve to this problem, which I haven't yet, I rang the Virgin helpline who told me to update my OS. I currently have the version 5.0 Bundle 1096 and I am trying to update it to the 5.0 Bundle 1168. I have been having increasing problems with trying to do this. I updated my desktop software for Blackberry but updating through this software always brings up the message at the install stage (after backing up my data) - "An error has occured while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." My internet is working fine and I have tried many times to update through this way. I have also tried updating through the blackberry website "web based updates area" that brings up the same message. Looking through over message boards, I tried the attempt at updating through the LOADER.EXE way. However after trying to download the OS manually to my computer, which my internet explorer thought was dangerous, it came up after with another error message - "Error 1335. The cabinet file 'Data1.cab' required for installation is corrupt and cannot be used. This could indicate a network error, an error from reading from the CD-ROM, or a problem with this package.' I am now out of ways to try and update my Blackberry and have no idea how to solve the white screen problem. Any help would be much appreciated. Karen x

    Just to specify the final type of the updating I tried was following the instructions on this links - http://us.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html I choose Europe, Virgin Media, Blackberry curve 8520. I got the software on to my computer and the error message that came up, appeared after choosing language and agreeing to the terms and conditions and starting the installation. Sorry about the big clump of writing; the post removed all of my paragraphs when I posted it. New to this! And need help! Thanks x

  • Excise invoice tab missed in migo screen for import material

    Hai,
    What we had done,
    1 we raise import po.
    2 we posted MIRO for custom invoice purpose,
    Next when we  are doing Migo entry Excise invoice tab  is not display.
    What is solution for this issue ?
    What we have checked.
    1. J1id all combinations, means Chapterid with material, cenvat determination, vendor excise details, Excise indicator for plant,
        Excise tax rates.
    2.At the time of po they ticked invoice base.
    3 We checked movement type 101 for excise duties.
    4.we checked excise group also in this Excise invoice captured is ticked.
    5.. i also checked table for movement type.
    Note: Against this material master no entry is there so this is first time material.
              Relating to this vendor previously we have entries relating to other material masters.
    What is solution for this issue ?
    Why it is not displayed in MIGO Screen ?
    Regards,
    Basha.

    Check the following
    1. Chapter id maintained in material master or j1id.
    2. Cenvat determination maintained
    3. Tax indicator for plant and vendor.
    4. Import conditions rightly classifed under defaults.
    5. Movement type rightly classified
    6.  In case you have created a new plant check for following in the client you are doing the transaction
    IMG>>Logistic-General>>Tax On Goods Movements>>India>>Basic Setting>>Maintain  Plant Settings
    7. Check if you have not done any enhancements, some times this may happen if any enhancement done.
    If all this is checked and in order it should work.
    Regards
    Sangeeta

  • MIGO-Capturing problem-Item is not available for Excise invoice,deselect th

    Hi Gurus
    while doing MIGO and part 1 posting am getting following error
    MIGO-Capturing problem-Item is not available for Excise invoice,deselect the item
    kindly help in this
    Maruthi

    hi
    check all settings in J1ID
    or
    in po did u got ur all values correctly for excise cess and hcess
    if yes then check ur vendor excise details in j1id
    if above setting are done properly then check ur CIN setting in spro>log gen>tax on goods movement >india>account determination >specify excise acct as per transaction/specify G/L acct as per transaction
    regards
    kunal

  • Excise Tab not appearing in MIGO Screen but getting posted with EI Entry

    Hi ,
    I am excuting CIN ......While doing MIGO, Excise tab is not apearing nowhere in the MIGO screen but entries are being created successfuly in MIRO and posted as well, Entries ....
                                                           GR/IR Clearing A/c Dr
                                                           RG 23 BED A/c      Dr
                                                           RG 23 Ecess A/c  Dr
                                                           RG 23 SHEcess A/c Dr
                                                           Vendor A/c Cr
    Can any one help me and provide solution for this.
    Thanks
    Sukant

    HI,
    Check your excise group settings, in it check migo settings.
    You need to mark tick in all boxes
    EI capture
    Post EI in MIGO
    Duty differenc at GR
    EI create/RG23D selection
    Update RG1at MIGO
    Also check in J1ID trax for the Po material chapter id is maintained.
    Regards
    KK

  • How can i set a layout for MIGO screen

    Hello all,
    How can i set a layout for MIGO screen. & make that layout default. Like i want to drag Requistioner column next to quantity in MIgo screen. temporarily I can drag but is there a way to save as layout & save it.

    Hi
    First you arrange however you want and then go to table settings which is there in the right corner of the item details and create a variant and save.
    Find a button with blue yellow and white at the top end above the vertical drag bar when put the cursor it will show you as Configuration.
    After creating the variant tick the check box use as standard setting below the variant
    Hope it helps
    Edited by: Girish  Adaviswamy on Mar 3, 2010 1:27 PM

  • Screen problem making iPad unusable

    My iPad2 is 15 month old and has developed a strange screen problem. It seems to have developed a mind of its own, typing ahead with random characters, doing its own thing when scrolling and trying to select in apps. Two days ago Apple support said restore to factory settings which I did. Same problem came back. Yesterday Apple support said the same thing which again I did. Same problem came back Today Apple support say it's a hardware issue out of warranty. We had a polite discussion about EU legislation but to cut a long story short, they basically said "sorry about that, but there is nothing our policies will let us do, you're on your own"
    Not exactly the response I hoped for. So I've now got an iPad that is basically useless, unless I want to use it as a door stopper.
    My business made a strategic commitmnt to Apple in Mid 2011 and this iPad was part of our shift away from PC/Windows. It's the first time I have needed to deal with Apple Support, and while each of the people I have spoken to have been professional, understanding and helpful, they have been unable / not allowed to assist any further.
    Yes, we could have taken out Apple Care Agreements. We chose not to on the basis of 2 year statutory warranty and Apple's reputatiuon for reliability. Seems I made a big mistake here and am left wondering if we made the right decision in going down the Apple route. Our investment in Apple hardware and software is massive for an SME and our workflow depends on iPads.
    I'm left with a problem. Thanks Apple.
    I'm still a fan but my blinkers have been removed. No longer will you be giveen the benefit of the doubt when you screw up - Maps, WiFi etc - as you have had a direct and negative impact on my business and missed a chance to keep a very happy customer on board.
    Does it help to post this? Not really, but it's off my chest.

    And you are within your "rights" to post this. But you do realize that we are not Apple employees - correct? We are just other users like yourself. If you feel that you have been treated unjustly, move up the Apple chain of command. Politely demand to speak to the next higher up and go from there.

  • Error while working in MIGO screen.

    Dear Members,
    I am encountering an error, while trying to receive goods in MIGO, Here are the list of screen shots regarding the error. Kindly assist me to correct the mistake to correctly make the MIGO.
    Kindly let me know any supporting or configuration document, so i can check and correct the mistakes.
    1.
    2.
    3.
    4.
    Kindly assist me on this asap.
    Regards : Karthikeya

    Hi,
    The accounting entry at the time of MIGO is
    Raw Mateial account dr
         to GR/IR Clearing account
    For Raw materials or inventory  transaction key is BSX and GR/IR Clearing is WRX.once you please check the combition of (WSCA BSX US01) whether the G/L is assigned if not please assign.then relogon to the MIGO Screen then it will allow
    Regards
    Chakri

  • MIGO screen options

    here in MIGO screen we frequently use Goods receipt, Transfer posting, cancellation,display, goods issue, return delivery,
    what is this Place in Storage, Remove from storage, subsequent adjustment, subsequent delivery
    can any one reply....

    Hi,
    Sub Subsequent delivery:
    If the vendor sends you a substitute delivery after the return delivery, you can
    enter the new goods receipt as a subsequent delivery. In a subsequent delivery,
    you refer to the material document of the original goods receipt or to the material
    document of the return delivery. The original reference document number
    (delivery note number) is therefore copied into the new material document. The
    direct assignment between the goods receipts and the invoice remains
    Subsequent delivery:
    If the subcontractor reports an excess consumption or underconsumption of
    components after the goods receipt posting, this can be corrected with a
    subsequent adjustment.
    remove from from storage:
    If you are doing two step transfer between to storage locations,
    need to use remove from storage first at issuing storage location.
    place in storage:
    If you are doing two step transfer between to storage locations,
    need to use place in storage receiving storage location.

  • Screen problems with photoshop elements 10

    I installed Photoshop Elements 10 and Premiere Elements.
    Premiere Elements works allright, but Photoshop E 10 gives screen problems.
    De menu's on the top roll out, but there is no text in them.
    The screen in Organiser is distorted.
    I reinstalled P E 10 but the same problem accurs.
    I dit a computer reset to an earlier date and installed Ph.E. 10 again but the same problem. No text in the topmenus and a distorted screen in Organiser.
    Letters become 6x larger than normal.
    All my other programms work fine. I never had screenproblems.
    I use Elements 8 now again and that works fine.
    I use: Windows 7
    Card: NVIDEA GeForce GT 220 resolution 1680x1050
    Do I have to remove Elements 8 before installing Ellements 10? Is that perhaps the problem?

    Ken, The problem is: The buttons don't work. So I cannot use Edit...
    But:
    I reïnstalled Adobe Elements 10 for the 4th time
    Cleaned my register again.
    restarted my computer
    Did a computer reset to an earlier date
    Installed Elements 10 again but .......not the try version of Premiere Elements.
    Now Elements 10 has a normal screen.
    This was a try and error sollution. I hope it will last.
    Jan

Maybe you are looking for