MIGO Table Control

After the 46C upgrade to ECC6, we have the table control all distorted and field sequence in the MIGO item details table is very different. Anyone has any solution to retain it back for all the users

Hi TRC,
I assume you added the new field (created a custom subscreen for that field in a Function group) and implemented MB_MIGO_BADI in SE19 and you called that subscreen in PBO DETAIL Method of this implementation.
If required, in PAI_DETAIL you can perform some logic on any action you want to perform on this custom screen,
Also please clear the global fields in RESET method else you will get the same value when you come to the same screen again after POST.
Now let me come your Display point.
In The MODE_SET method you can set different modes like Display, Goods Receipts etc with refdoc like PO Material doc etc:-
ACTION and REFDOC will discribe the mode of transaction MIGO.
i_action:
A01 = Goods receipt
A02 = Return delivery
A03 = Cancellation
A04 = Display
A05 = Release GR bl.st.
A06 = Subsequent deliv.
A07 = Goods issue
i_refdoc:
R01 = Purchase order
R02 = Material document
R03 = Delivery note
R04 = Inbound delivery
R05 = Outbound delivery
R06 = Transport
R07 = Transport ID code
R08 = Order
R09 = Reservation
R10 = Other GR
You have to set g_no_input flag in this method based on your requirement. Eg:-
IF i_action = 'A04' .
g_no_input = 'X'.
ENDIF.
Now you can use this flag (or you can set your own flag) to choose any other subscreen with the custom field as output only or any of the conditions you want.
Suppose you just want to display the field on the screen on Display mode only, In this mode_set method you can set this flag and use it in PBO_DETAIL method before you are calling your subscreen with IF condition on g_no_input .
I hope it will resolve the problem.
Regards,
Manish

Similar Messages

Custom fields in migo table control not updating

hi ,
This is to have your valuable suggestion , wrt , following issue..
In transaction MIGO , i have to add two fields uebto and untto in table control .
I am able to add them in table control, but some how not able to pick data for these fields .
error coming is :
" System error: Incorrect Customizing for field
ZZUEBTO".
if any face such type of issue , answer me .
Thanx,
jeet

Hi,
Thanks for your reply. I have added the custom fields in the item detail. But the customer wants the custom fields in the table view also.
Is there any screen exit available to modify the table control of MIGO?
Thanks.

Adding a new column in table control of MIGO

Hello,
I want to add a column in the itemlist table control (screen 200) of MIGO to show the batch's case qty. I used an example in BAdI MB_MIGO_BADI to add a new header tabstrip but the itemlist table is still pointing to MIGO's table control screen 200 ( used in subscreen SUB_ITEMLIST ). I want to show my table control which has the added column instead.
Does anyone have any ideas how to do this ?
Thanks.
TTran

Hi....
1. Goto that screen layout and make it change mode.
2. Follow the menu path -> goto-> secondary window-> dictionary/ program fields
3. select the reuired field
4. drag that into your table control , cretes new column
5. Also capture icon in the left side i.e. T for text make that in header area of new field.
6. Double click on this , give some name.
7. Save check activate
Thanks,
Naveen.I

Add new field in detail table control MIGO

Hi Gurus,
We are able add the new(custom) field in MSEG table and it is able to view at line item lebel in transaction MIGO.
However the user requirement is he need the field shoud be in detail table control.
Could you please help me out. Thanks in advance.
Thanks & Regards
Tirumula Rao Chinni

hi
Please go through these links
How to Add Field to MIGO : Urgent
MIGO How to add new screen field
Adding custom fields in the MIGO screen
Thanks..

Add columns with custom fields in the table control of MIGO

Hi,
I have to add custom fields in the table control view of item in the MIGO. I have added the fields in the GOITEM structure and i am able to display it in the item details tab. I want the same fields to be visible as columns in the table control view of the items.
I found that TV_GOITEM is the control in SAPLMIGO program referring to the table control of items but it is referring only to the standard fields available in Screen 200.
Please let me know if there is any screen exit or option to add the custom fields in the control TV_GOITEM.
Thanks.

Hi,
Thanks for your reply. I have added the custom fields in the item detail. But the customer wants the custom fields in the table view also.
Is there any screen exit available to modify the table control of MIGO?
Thanks.

Modifying table control in MIGO

Hi,
I'm trying to modify MIGO transaction, and I found the MB_MIGO_BADI Badi, but I have no idea how to modify the central table control, They want to show new column on it. If anybody had done this stuff before I will be very grateful.
Thanks in advance.
Jano

Hi,
They do not want to modify the lines, They wants to put another field on the table control, I'm seeing the sap sample (CL_EXM_IM_MB_MIGO_BADI) in the method line_modify it just to modify the line data just in case you want to change any data, am I wrong?
Thanks

Badi table control

Hi All,
I am trying to read the data from table control on the subscren of detailed subscreen for every item in migo.I am using badi Mb-migo_badi.So please tell me how to handle this. I
Regards,
C.A

Hi Abhinay,
I hope the following links will help you,
MB_MIGO_BADI IMPLEMENTATION
https://forums.sdn.sap.com/click.jspa?searchID=15493777&messageID=1819387
MB_MIGO_BADI Implementation
Please help me on this!!!(MB_MIGO_BADI)
regards,
Harish
Edited by: Harish Kumar on Aug 24, 2008 1:08 PM

Reg:How to delete the column in table control also from database table.

Hi Experts,
Once again thank u all for giving the responses.
one more doubt is how to delete the columns of table control and also the record shold delete from ztable.
With Regards,
Saroja.P.

Hi,
If you want to delete the rows in the table control and simultaneously delete it from the database table, then you can implement a 'DELETE' functionality specific to your table control. Have a MARK field (you will find that in the screen attributes of the table control -> give a name for the MARK field, you will find an additional MARK column at the beginning of your table control). You can check whatever rows you want to delete from the table control, call the delete module.
"This portion of code inside the LOOP...ENDLOOP.
IF sy-ucomm eq 'F_DELETE'.
gt_itab2-check = mark. " Store the MARK field status into your internal table's correspoding field 'check'
MODIFY gt_itab INDEX tabcontrol-current_line.
ENDIF.
iF sy-ucomm eq 'DELETE1'.
DELETE gt_itab WHERE check eq 'X'. "Your internal table does not have rows that you want to delete
ENDIF.
Now you can modify your database table using the MODIFY statement.
MODIFY ZDB FROM TABLE gt_itab.

How to delete the row in table control with respect to one field in module pool programming?

Hi,
Can I know the way to delete the row in table control with respect to one field in module pool programming
Regards
Darshan MS

HI,
I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
I have written this code,
module USER_COMMAND_9000 input.
DATA OK_CODE TYPE SY-UCOMM.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
     WHEN 'DELETE'.
        LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
            APPEND LS_SOURCE TO LT_RESTORE.
            DELETE TABLE LT_SOURCE FROM LS_SOURCE.
            SOURCE-LINES = SOURCE-LINES - 1.
        ENDLOOP.
But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
So I thought of doing with respect to the field.

ISSUE IN THE TABLE CONTROL

HAI FRIENDS,
I HAVE DISPLAYED THE VALUES IN THE TABLE CONTROL
I HAVE DEFINED 'CHECK' FOR SELECTING THE FIELDS OF TABLE CONTROL
THE ISSUE STARTS HERE
WHEN I CHECK TOP FIELDS OF TABLE CONTROL
THEN SCROLLED VERTICALLY, THE TABLE CONTROL TO SELECT I.E CHECK THE
BOTTOM FIELDS OF TABLE CONTROL.
THE TOP FIELDS WATEVER CHECK WHERE CHECKS DISPAPEARS FOR TOP FIELDS .
BY THIS I UNABLE TO SELECT THE FIELDS OF TABLE.
PLZ HELP ME URGENTLY NEEDED.
MY MONDAY I NEEDED

You use an internal table for values in table control..
One of the fields( very first field) in that itab is used for check - uncheck..
u have make it 'X' when u click any row...
I think this might be the problem in ur case.. when u scroll PAI starts... in that PAI check the value of check box for that particular field...
Regards
Prax

How to populate data in table control .

hi all,
i put matnr no. in screen no. 103
validation is done at that screen only.
now when i want to modify dat record
when i put matnr no. at screen 103
so how i will get all data of dat number to table control screen.

Hi Darshan,
Here is a detailed description of how to update data in table controll.
Updating data in table control
The ABAP language provides two mechanisms for loading the table control with data from the internal table and then storing the altered rows of the table control back to the internal table.
Method 1: Read the internal table into the Table Control in the screenu2019s flow logic. Used when the names of the Table Control fields are based on fields of the internal table.
Method 2: Read the internal table into the Table Control in the module pool code. Used when the names of the Table Control fields are based on fields of the database table.
Method 1 (table control fields = itab fields)
In the flow logic we can read an internal table using the LOOP statement. Define the reference to the relevant able control by specifying WITH CONTROL <ctrl>
Determine which table entry is to be read by specifying CURSOR <ctrl>-CURRENT_LINE.
After the read operation the field contents are placed in the header line of the internal table. If the fields in the table control have the same name as the internal they will be filled automatically. Otherwise we need to write a module to transfer the internal table fields to the screen fields.
We must reflect any changes the user makes to the fields of the table control in the internal table otherwise they will not appear when the screen is redisplayed after PBO processing, (eg, after the user presses Enter or scrolls) However, this processing should be performed only if changes have actually been made to the screen fields of the table control (hence the use of the ON REQUEST)
PROCESS BEFORE OUTPUT.
LOOP AT ITAB_REG WITH CONTROL TCREG
CURSOR TCREG-CURRENT_LINE.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
MODULE MODIFY_ITAB_REG.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2 (table control fields = dict. fields)
If using a LOOP statement without an internal table in the flow logic, we must read the data in a PBO module which is called each time the loop is processed.
Since, in this case, the system cannot determine the number of internal table entries itself, we must use the EXIT FROM STEP-LOOP statement to ensure that no blank lines are displayed in the table control if there are no more corresponding entries in the internal table.
PROCESS BEFORE OUTPUT.
LOOP WITH CONTROL TCREG.
MODULE READ_ITAB_REG.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG
ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE READ_ITAB_REG OUTPUT.
READ TABLE ITAB_REG INDEX TCREG-CURRENT_LINE.
IF SY-SUBRC EQ 0.
MOVE-CORRESPONDING ITAB_REREG TO TCREG.
ELSE.
EXIT FROM STEP-LOOP.
ENDIF.
ENDMODULE.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
MODIFY ITAB_REG INDEX
TCREG-CURRENT_LINE.
ENDMODULE.
Updating the internal table
Method 1
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: TCREG-REG,
TCREG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Updating the database
MODULE USER_COMMAND_100.
CASE OK_CODE.
WHEN u2018SAVEu2019.
LOOP AT ITAB-REG.
CHECK ITAB_REG-MARK = u2018Xu2019.
MOVE-CORRESPONDING ITAB_REG TO TCREG.
UPDATE TCREG.
ENDLOOP.
WHEN u2026
u2026
ENDCASE.
ENDMODULE.
Hope this will solve your problem.
Regards,
Pavan.
Edited by: PAVAN CHANDRASEKHAR GANTI on Aug 3, 2009 12:48 PM

Update internal table data from table control

Hi GURUS,
I need help regarding one of my requirement.
I need to display data from the internal table on the screen and when the user selects a record/multiple records from screen and clicks on approve button i need to update one of the field from N to Y in the corresponding Ztable. Once the record is updated from Ztable , that should no longer be visible for the user on the screen.
I am using table control wizard to display data. I am able to update the Ztable, but that record is not refreshing from the user screen. Any suggestions would be approved.
Also please let me know if table control is the best way to do this/ alv grid control??

hi
REFRESH CONTROL Control-Name FROM SCREEN '0100' -> use this command to refresh the table control
to know more, read into
https://forums.sdn.sap.com/click.jspa?searchID=2934287&messageID=673474
Re: URGENT HELP REQ IN TABLE CONTROL WIZARD
if helpful, reward
Sathish. R

Validação de campos em um Table Control

Boa tarde.
Gostaria de pedir um auxilio .
Tenho uma duvida, na seguinte situação. Estou construindo um programa de Module Pool
Neste programa vai ter um tabstrip, para atualizar duas tabelas Z
Na primeira u201CABAu201D, serão inseridos os registros da tabela pai e na segunda u201CABAu201D, os registros da tabela
Filho a relação será de 1 para N.
Na tabela filho os campos chaves serão um identificador próprio , mais o registro chave da tabela pai.
Na segunda a aba para inserir os registros da tabela filho, terei que usar um table Control.
O meu problema é que ao inserir os registros na tabela filho, terei que de forma automática preencher o campo que corresponde a chave da tabela pai. Ou seja o usuário na primeira u201Cabau201D digamos digite o código da tabela pai como 10 ao inserir na table Control um registro o campo correspondente a chave da tabela pai devera ser preenchido com o valor 10 e não permitir ao usuário efetuar qualquer manutenção neste campo.
Como eu faço isso???
Alguém tem algum exemplo????
Obrigado a todos

Olá, bom dia!
Este é um dessenvolvimento bem específico, talvez por isso ninguem lhe respondeu ainda. Voce já deu uma olhada na seção de Wiki, buscando algum código de exemplo?
Vai alguns links que encontrei:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1499ec90-0201-0010-769f-860989655f7e?QuickLink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/display/sandbox/ModulePoolProgramming
O primeiro link traz um exemplo de como torna um campo ineditavel via codigo. Espero que possa ajudar.
Abraços,
Rodrigo Paisante

Capture field name in table control on double click

Hi,
How can I capture the field name of internal table passed to table control on double click?
I have set function code as 'PICK' and applied 'Respond to double click' and used GET CURSOR statement. Here I can get the values like row number (line number), field value also. But I would like to capture on which field the cursor is (or on which column the cursor is)?
Thanks in advance.
Regards
Ramesh.

Got it.
We can capture it by using the statement GET CURSOR only.
GET CURSOR field <field xx> .
Here the <field xx> is the field name where we have said double click.

How to activate the Vertival Scroll Bar to Table control

Hi All,
I Have created a Module pool table control(Wizard) with Input control,where user can enter the values in the screen.
In my screen 15 lines are visible,once i enter all 15 rows,vertical scroll bar is active,but rest of all lines are in deactivate mode.
My requirement is:Once i enter all the visible lines,the remaining lines should be in activ mode(In put control).
I appreciate your response.
Best Regards,
Seshadri

DATA : BEGIN OF IT_MARA OCCURS 1,
       MATNR LIKE MARA-MATNR,
       ERSDA LIKE MARA-ERSDA,
       ERNAM LIKE MARA-ERNAM,
       MTART LIKE MARA-MTART,
       MBRSH LIKE MARA-MBRSH,
       V_FLAG TYPE C,
       END OF IT_MARA.
DATA : WA_MARA LIKE it_MARA .
CONTROLS TABLE TYPE TABLEVIEW USING SCREEN 100.
MODULE POPULATE_100 INPUT.
CASE SY-UCOMM.
    WHEN 'DISP'.
      SELECT MATNR
             ERSDA
             ERNAM
             MTART
             MBRSH FROM MARA INTO WA_MARA .
        APPEND WA_MARA TO IT_MARA.
      ENDSELECT.
      DESCRIBE TABLE IT_MARA LINES V_TEXT.
      TABLE-LINES = V_TEXT.
      CLEAR IT_MARA.
Regards..
Balaji ( assign if this helps u ..)

MIGO Table Control

Similar Messages

Maybe you are looking for