Migo transaction enhancements
Hello Experts,
I got to deal with MIGO transaction.
Actually,
in pogr scenario, i have to add columns in table control in migo , these two fields to add are uebto and untto.
I am able to add these two fields to structure GOITEM, but now i need to populate them in table control.
I have tried with badi 'MB_MIGO_BADI', BUT THAT IS TO MAKE CHANGES WITH SUBSCREENS in header and item detail.
So i am not able to find the way to do this.
Any answers .
thanx ,
jeet
hi shahin ,
do you mean enhancement point by saying implicit enhancements.
Actually i am very new to abap, and i have checked out that there is no BADI to achieve the above discuss issue,
if you have gone through any such scenario ,refer me the way to do it.
Any one if know any user exits to do it ,
please tell me.
Thanks ,
Jeet Chauhan
Similar Messages
-
MIGO Transaction Enhancement Spot
Hi Experts,
In the MIGO transaction , in the serial number tab after entering serial number and then clicking on the check push button,
We need to validate for particular moment type.
The enhancement spot identified for it is Enhancement Spot - ES_SAPLMIGO SE38 - LMIGOST2,
when I am going
But how to get
Matnr, BWART, WERKS, LIFNR
Inside the Enhance -spot where to fetch this values.
Thanks In Advance
IFFSelf-Answered.
-
Hi Experts,
In the MIGO transaction , in the serial number tab after entering serial number and then clicking on the check push button,
We need to validate for particular moment type.
The enhancement spot identified for it is Enhancement Spot - ES_SAPLMIGO SE38 - LMIGOST2,
when I am going
But how to get
Matnr, BWART, WERKS, LIFNR
Inside the Enhance -spot where to fetch this values.
Thanks In Advance
IFFSelf-Answered.
-
Enhancement for Automatic GI for MIGO transaction
Hey Folks ,
My requirement is as :
I wanted to do automatic GI of the goods once their GR is done and dat data should also be updated to sap tables .Now a days we are using MIGO transaction for GI and GR both ,I have found a BADI for MIGO also but i am unable how to procede since GR and GI are in single trancation code .
We are also not using PP module so backflushing wont work here .
Automatic GI should trigger after saving the GR entries .
Regards
Edited by: swapnil kamble on Jan 13, 2010 5:53 PM
Moderator message - Cross post locked
Edited by: Rob Burbank on Jan 13, 2010 12:04 PMHi Renjith,
You can check the following link, Hope it helps you to some extent:
Re: Implement unique serial number within a client
And you can also try user exit EXIT_SAPLIPW1_001 for Automatic serial number assignment. -
ABAP DUMP While doing GI Through Zmovement type in MIGO Transaction
Hi ,
We have migrated from FM FBS to BCS from 12.01.2015.
And we are using 101 profile with GR and IR update.
We received blow ABAP Dump while doing the GI through MIGO Transaction.
Can you please help on this.
Dump detatils
Category ABAP Programming Error
Runtime Errors MESSAGE_TYPE_X
ABAP Program CL_BUAVC_ENTRY================CP
Application Component PSM-FM-BCS-AC
Date and Time 13.01.2015 09:10:00
Operating system..... "AIX 1 6, AIX 1 7" |
| |
| Memory consumption |
| Roll.... 0 |
| EM...... 33518336 |
| Heap.... 0 |
| Page.... 196608 |
| MM Used. 21989120 |
| MM Free. 3145840 |
|User and Transaction |
| Client.............. 256 |
| User................ "MM_BUX00_ZZ" |
| Language key........ "R" |
| Transaction......... "MIGO_GI " |
| Transaction ID...... "54AEDD9E3EE60710E10080000A15C616" |
| |
| EPP Whole Context ID.... "54B35F7088300910E10080000A15C616" |
| EPP Connection ID....... 00000000000000000000000000000000 |
| EPP Caller Counter...... 0 |
| |
| Program............. "CL_BUAVC_ENTRY================CP" |
| Screen.............. "SAPLMIGO 0001" |
| Screen Line......... 18 |
| Debugger Active..... "none" |
|Information on where terminated |
| Termination occurred in the ABAP program "CL_BUAVC_ENTRY================CP" - |
| in "POST". |
| The main program was "SAPLMIGO ". |
| |
| In the source code you have the termination point in line 82 |
| of the (Include) program "CL_BUAVC_ENTRY================CM00J". |
|Source Code Extract |
|Line |SourceCde |
| 52|*--- method has provided some errors!): |
| 53| |
| 54|* Note 1499464: |
| 55|* IF cl_abap_aab_utilities=>is_active( id = 'BUAVC_GROUP' |
| 56|* mode_assert_dump = 'X' ) = 'X'. |
| 57| MOVE 'X' TO l_flg_dump. |
| 58|* ENDIF. |
| 59| |
| 60|*--- Check if the entry buffer of the AVC ledger contains data records |
| 61|*--- from previous COLLECT events: |
| 62| IF ( l_f_avc_ledger-ref_ledger->entry_buffer_lines_count( ) > 0 ). |
| 63|*--- Sorry, must dump: |
| 64| ASSERT ID buavc_group |
| 65| FIELDS c_avc_text 'POSTING_NOT_ALLOWED' |
| 66| CONDITION l_flg_dump <> 'X'. |
| 67| IF l_flg_dump = 'X'. |
| 68| MESSAGE x002(buavc) WITH c_avc_text space |
| 69| 'POSTING_NOT_ALLOWED' space. |
| 70| ENDIF. |
| 71| ENDIF. |
| 72| ENDIF. |
| 73|*---------------------------------------------------------------------- |
| 74|* Note 1666556: |
| 75| IF me->g_commit_before_post EQ 'X'. |
| 76|*--- An unauthorized COMMIT WORK occurred before calling this POST |
| 77|*--- method. This COMMIT WORK has refreshed the AVC entry buffer and |
| 78|*--- would thus create a database inconsistency! |
| 79| MOVE 'X' TO l_flg_dump. |
| 80| IF l_flg_dump = 'X'. |
| 81|*--- Sorry, must dump (see note 1666556): |
|>>>>>| MESSAGE x002(buavc) WITH c_avc_text space |
| 83| 'INVALID_COMMIT' space. |
| 84| ENDIF. |
| 85| ENDIF. |
| 86|*---------------------------------------------------------------------- |
| 87| |
| 88| |
| 89|*--- Call the POST method of the corresponding ledger instance: |
| 90| CALL METHOD l_f_avc_ledger-ref_ledger->post |
| 91| EXPORTING |
| 92| i_ref_appl_log = me->g_ref_appl_log |
| 93| i_doc_ref = i_doc_ref. |
| 94| |
| 95| ENDLOOP. |
| 96|
Thanks Advance.
SAMHi Sam,
Please check if there is any commit statement written in badi or enhancement before calling this method for posting which is leading to update termination.
Regards,
Prakash. -
Inserting/ deleting a line item in MIGO Transaction ( Goods Issue )?
Hi,
Can anyone help me with the logic for Inserting / deleting a line item in MIGO Transaction?
Thanks,
csHi
The following user exits and badis for migo:
Check the mb_migo_badi and check the method 'LINE_MODIFY' for u r purpose.
For undestanding see the documentation of the badi and see the example implementation
class: CL_EXM_IM_MB_MIGO_BADI
Enhancement/ Business Add-in Description
Enhancement
MB_CF001 Customer Function Exit in the Case of Updating a Art. Doc.
MBCF0011 Read from RESB and RKPF for print list in MB26
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0009 Filling the storage location field
MBCF0007 Customer function exit: Updating a reservation
MBCF0006 Customer function for WBS element
MBCF0005 Article document item for goods receipt/issue slip
MBCF0002 Customer function exit: Segment text in article doc. item
Business Add-in
MB_RESERVATION_BADI MB21/MB22: Check and Complete Dialog Data
MB_QUAN_CHECK_BADI BAdI: Item Data at Time of Quantity Check
MB_PHYSINV_INTERNAL Connection: Core Inventory and Retail AddOn
MB_MIGO_ITEM_BADI BAdI in MIGO for Changing Item Data
MB_MIGO_BADI BAdI in MIGO for External Detail Subscreens
MB_DOC_BADI_INTERNAL BAdIs when Creating an Article Document (SAP Internal)
MB_DOCUMENT_UPDATE BADI when updating article document: MSEG and MKPF
MB_DOCUMENT_BADI BAdIs when Creating an Article Document
MB_CIN_MM07MFB7_QTY Proposal of quantity from Excise invoice in GR
MB_CIN_MM07MFB7 BAdI for India Version exit in include MM07MFB7
MB_CIN_LMBMBU04 posting of gr
MB_CHECK_LINE_BADI BAdI: Check Line Before Copying to the Blocking Tables
ARC_MM_MATBEL_WRITE Check Add-On-Specific Data for MM_MATBEL
ARC_MM_MATBEL_CHECK Check Add-On-Specific Criteria for MM_MATBEL
If it is helpfu rewards points
Regards
Pratap.M -
Saving custom fields to MSEG added in additional TAB in MIGO transaction
Hi Experts,
I am facing an issue with an enhancement in MIGO transaction for which i need help. I have gone through several threads with similar issues but none of them have solved my issue. I have worked around with all BADIs of MIGO and user exits available but to no avail so I am posting a new thread.
The requirement is pretty straight forward of adding a custom TAB in item details section of MIGO transaction. I have done that using BADI: MB_MIGO_BADI, method PBO_DETAIL. I created a screen with my custom fields and passed them in this method. The TAB appears as expected with all the fields. The custom fields are in MSEG table which has been enhanced and it needs to be updated with the user values on the screen.
The issue creeps in when there are multiple materials in the purchasing document and user works around with them. Say he clicks on the second material and in the custom TAB changes its details in custom fields. Now he clicks on the fourth material and changes its details. Continues this for all the materials in random order. How do i identify in my custom screen [developed separately and called in PBO_DETAIL of the BADI] which details belong to which material or line number. The only way to do it is by using the purchasing order number and line item number. These are not available in my custom screen and needs to be exported from somewhere and imported there. I have not been able to identify the point where export can be done.
Can anyone help me out with this problem? Either the point where export can be done or any other way of identifying the link between the line number / material number and the custom field details entered by the user.
Thanks,
RitvikHi Ritvik,
you will not need it.
The item methods will process exactly the item what the addional item data are related to. In PBO_DETAIL and PAI_DETAIL, use parameter I_LINE_ID for the item reference.
Note: Not only read SCN etc, also the parameters desciption of the methods used.
Regards,
Clemens -
BADI for MIGO transaction in ECC 6.0
Hi All,
We are upgrading our SAP R3 from 4.6c to ECC 6.0.
In the new system, Transaction SE18 now has two options
1. Enhancement spot
2. BAdI Name
When I display my BADI MB_DOCUMENT_BADI
Attributes tab shows BAdI migrates to enhancement spot MB_GOODSMOVEMENT
When I display Enhancement spot Technical details Tab shows Enhancement Implementation Status shows "Initial".
We have implemented this BADI in our 4.6c version. And its triggering when I run MIGO transaction.
In the new system BADI is not triggering when I run the MIGO.
Above is the only difference I found in the new system when compared with our old system settings.
Can any one suggest me what all the things I need to take care to get working this BADI
Thanks,
SatishHi satish,
Pls check here,
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://www.esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
Cheers
Hareesha k -
Screen Exit in MIGO transaction
Hi All,
My requirement is to add new tab in the item level of the transaction MIGO.
For this purpose, I found the BADI MB_MIGO_BADI in which I am making use of methods PBO_DETAIL, PAI_DETAIL, LINE_MODIFY and POST_DOCUMENT in my enhancement.
Now In my enhancement, I have create a container on the sub screen along with few fields and display some text based on the material. For this I have created a program ZTEST_BADI with screen 9000 and handled the logic for placing text editor on the container and populating the text in the text editor. But I am getting an exception ERROR_DP from the method SET_TEXT_AS_R3TABLE in the class CL_GUI_TEXTEDIT.
Exception is stated as "Error while sending R/3 table to TextEdit control!"
My questions:
1. What might be the reason for this exception? This functionlity is working when I have tested the program by executing it individually with out calling from MIGO transaction.
2. How text should be passed when we are handling text editor in sub screens.Is that mandatory to convert to stream? or will this method SET_TEXT_AS_R3TABLE suits my requirement?
Thanks,
Ravee..hi ravee,
Please go through that link ...it will helpful for U...
WWWDOTSAPTECHNICALDOTCOM/Tutorials/ExitsBADIs/MIGO/screenexit.htm
Regards,
Arun.
Edited by: Arun Kumar on Dec 4, 2009 11:51 AM
Edited by: Arun Kumar on Dec 4, 2009 11:51 AM -
Addition of Dept ans Section input fields in MIGO transaction.
Hi experts,
im very new to customer exits. I got requirement to add two input fields in 'OWN DATA' in MIGO transaction. These fields should be for selected movement types.
Can any one please help me in solving this. Please kindly tell me in detail as im new to enhancements.
advance
thanks
vijay.SEARCH in SCN for these badi you will get lot of posts.
MB_MIGO_ITEM_BADI,MB_MIGO_BADI -
Hi All,
While creating the "Goods Receipt" in MIGO transaction, I have to update the "City of Origin" (EIP0-HERKL) field (Import tab -> click on "Detail", again click on "Origin/Destination/Business").
I donot have to manually update this field, I want to fetch value from table. Could you suggest me the BADI name or enhancement, so that I can pass the value to it.
Thanks in advance.
Regards,
HarshaHi,
Try using
MB_MIGO_BADI -
BADI or userexit for MIGO transaction
hi All,
I have a requirement to enhance the MIGO transaction subscreen 304.
In subscreen 304 there is only check box ITEM_OK.
In the MIGO at the bottom of the screen ,whenver we click on item_OK check box and press enter, in the line item it will automatically checks.
After the first check it has to get disabled in the screen.
I am trying to find the BADI for this..still trying
Please let me know how to achieve this functionality.Hi,
Try below BAdi's :
MB_MIGO_ITEM_BADI or
MB_MIGO_BADI
MB_DOCUMENT_BADI.
Also these will be of help furthur.
Enhancement/ Business Add-in Description
Enhancement
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
MBCF0011 Read from RESB and RKPF for print list in MB26
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0009 Filling the storage location field
MBCF0007 Customer function exit: Updating a reservation
MBCF0006 Customer function for WBS element
MBCF0005 Material document item for goods receipt/issue slip
MBCF0002 Customer function exit: Segment text in material doc. item
Business Add-in
MB_RESERVATION_BADI MB21/MB22: Check and Complete Dialog Data
MB_QUAN_CHECK_BADI BAdI: Item Data at Time of Quantity Check
MB_PHYSINV_INTERNAL Connection: Core Inventory and Retail AddOn
MB_MIGO_ITEM_BADI BAdI in MIGO for Changing Item Data
MB_MIGO_BADI BAdI in MIGO for External Detail Subscreens
MB_DOC_BADI_INTERNAL BAdIs when Creating a Material Document (SAP Internal)
MB_DOCUMENT_UPDATE BADI when updating material document: MSEG and MKPF
MB_DOCUMENT_BADI BAdIs when Creating a Material Document
MB_CIN_MM07MFB7_QTY Proposal of quantity from Excise invoice in GR
MB_CIN_MM07MFB7 BAdI for India Version exit in include MM07MFB7
MB_CIN_LMBMBU04 posting of gr
MB_CHECK_LINE_BADI BAdI: Check Line Before Copying to the Blocking Tables
ARC_MM_MATBEL_WRITE Check Add-On-Specific Data for MM_MATBEL
ARC_MM_MATBEL_CHECK Check Add-On-Specific Criteria for MM_MATBEL
hope this will help you.
Regards,
Kiran -
User Exit after saving of MIGO Transaction
hi all,
I need User Exit for this requirement.
I will do MIGO Transaction for Goods Receipt. at this goods receipt no will be generated and i will update that GR no to RESB Table. For this i need user exit in MIGO Transaction only.
Please suggest is there any user exit for this after saving of migo transaction.
Thanx & Regads
Rami ReddyHi
Check the enhancements
MBCF0010
MBCF0007
Regards,
Raghu. -
EXIT NAME OR BADI FOR FIELD IN MIGO TRANSACTION (full poins will be given)
Hai all,
VERY URGENT REQ.
In MIGO transaction, I want to know the BADI or EXIT NAME in which the following fields are avilable .
Fields name: exgrp, EXCISE_ACTION
exact screen field name is : J_1IEXHEAD-EXGRP
J_1IEXHEAD-EXCISE_ACTION
Full Points will be given for correct answer.
Thanks in advance.
s.senthil kumarHi,
Try this code .We can get the User exits and Badis for the Tcode.
Code:
& Report ZPJA_PM002 (Ver4) &
& PJA Consultancy Services (www.pjas.com) &
& This report attmpts to find Enhancements, Program-Exits, BADIs &
& and Business Transaction Events in a particular program/tcode. &
& Other search options: &
& Program: RPR_ABAP_SOURCE_SCAN &
& FModule: &
& Text Elements: &
& P_DEVC Show user-exits from development class &
& P_LIMIT Limit submit program selection &
& P_FUNC Show function modules &
& P_SUBM Show submit programs &
& S01 Selection data (TCode takes precedence over program name) &
report zpja_pm002
no standard page heading
line-size 221.
data: tabix like sy-tabix,
w_linnum type i,
w_off type i,
w_index like sy-tabix,
w_include like trdir-name,
w_prog like trdir-name,
w_incl like trdir-name,
w_area like rs38l-area,
w_level,
w_fsel like sy-ucomm, " Determination of screen field
w_str(50) type c,
w_funcname like tfdir-funcname.
constants: c_fmod(40) type c value 'Function modules selected: ',
c_subm(40) type c value 'Submit programs selected: ',
c_col1(12) type c value 'Enhanmt Type',
c_col2(40) type c value 'Enhancement',
c_col3(30) type c value 'Program/Include',
c_col4(20) type c value 'Enhancement Name',
c_col5(40) type c value 'Enhancement Description',
c_col6(8) type c value 'Project',
c_col7(1) type c value 'S',
c_col8(12) type c value 'ChangeName',
c_col9(10) type c value 'ChangeDate'.
Work Areas: ABAP Workbench
data: begin of wa_d010inc.
data: master type d010inc-master.
data: end of wa_d010inc.
data: begin of wa_tfdir.
data: funcname type tfdir-funcname,
pname type tfdir-pname,
include type tfdir-include.
data: end of wa_tfdir.
data: begin of wa_tadir.
data: devclass type tadir-devclass.
data: end of wa_tadir.
data: begin of wa_tstc.
data: pgmna type tstc-pgmna.
data: end of wa_tstc.
data: begin of wa_tstcp.
data: param type tstcp-param.
data: end of wa_tstcp.
data: begin of wa_enlfdir.
data: area type enlfdir-area.
data: end of wa_enlfdir.
Work Areas: BADIs
data: begin of wa_sxs_attr.
data: exit_name type sxs_attr-exit_name.
data: end of wa_sxs_attr.
data: begin of wa_sxs_attrt.
data: text type sxs_attrt-text.
data: end of wa_sxs_attrt.
Work Areas: Enhancements
data: begin of wa_modsap.
data: member type modsap-member.
data: end of wa_modsap.
data: begin of wa_modsapa.
data: name type modsapa-name.
data: end of wa_modsapa.
data: begin of wa_modsapt.
data: modtext type modsapt-modtext.
data: end of wa_modsapt.
Work Areas: Business Transaction Events
data: begin of wa_tbe01t.
data: text1 type tbe01t-text1.
data: end of wa_tbe01t.
data: begin of wa_tps01t.
data: text1 type tps01t-text1.
data: end of wa_tps01t.
user-exits
types: begin of ty_mod,
member like modact-member,
name like modact-name,
status like modattr-status,
anam like modattr-anam,
adat like modattr-adat,
end of ty_mod.
data: w_mod type ty_mod.
types: begin of t_userexit,
type(12) type c,
pname like trdir-name,
txt(300),
level type c,
modname(30) type c,
modtext(60) type c,
modattr type ty_mod,
end of t_userexit.
data: i_userexit type standard table of t_userexit with header line.
Function module developmnet classes
types: begin of t_devclass,
clas like trdir-clas,
end of t_devclass.
data: i_devclass type standard table of t_devclass with header line.
types: begin of t_enlfdir,
area type enlfdir-area,
end of t_enlfdir.
data: i_enlfdir type standard table of t_enlfdir with header line.
Submit programs
types: begin of t_submit,
pname like trdir-name,
level,
done,
end of t_submit.
data: i_submit type standard table of t_submit with header line.
Source code
types: begin of t_sourcetab, "#EC * (SLIN lügt!)
line(200), "#EC * (SLIN lügt!)
end of t_sourcetab. "#EC * (SLIN lügt!)
data: sourcetab type standard table of t_sourcetab with header line.
data c_overflow(30000) type c.
Description of an ABAP/4 source analysis token
data: i_stoken type standard table of stokex with header line.
data wa_stoken like i_stoken.
Description of an ABAP/4 source analysis statement
data: i_sstmnt type standard table of sstmnt with header line."#EC NEEDED
keywords for searching ABAP code
types: begin of t_keywords,
word(30),
end of t_keywords.
data: keywords type standard table of t_keywords with header line.
function modules within program
types: begin of t_fmodule,
name like rs38l-name,
pname like trdir-name,
pname2 like trdir-name,
level,
bapi,
done,
end of t_fmodule.
data: i_fmodule type standard table of t_fmodule with header line.
& Selection Options &
selection-screen begin of block selscr1 with frame title text-s01.
parameter: p_pname like trdir-name memory id rid,
p_tcode like syst-tcode,
p_limit(4) type n default 100,
p_devc like rihea-dy_ofn default ' ',
p_func like rihea-dy_ofn default ' ',
p_subm like rihea-dy_ofn default ' '.
selection-screen end of block selscr1.
& START-OF-SELECTION &
start-of-selection.
if p_pname is initial and p_tcode is initial.
message e008(hrfpm). "Make entry on the selection screen
stop.
endif.
ensure P_LIMIT is not zero.
if p_limit = 0.
p_limit = 1.
endif.
perform data_select.
perform get_submit_data.
perform get_fm_data.
perform get_additional_data.
perform data_display.
& Form DATA_SELECT &
form data_select.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get programs/includes' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
determine search words
keywords-word = 'CALL'.
append keywords.
keywords-word = 'FORM'.
append keywords.
keywords-word = 'PERFORM'.
append keywords.
keywords-word = 'SUBMIT'.
append keywords.
keywords-word = 'INCLUDE'.
append keywords.
if not p_tcode is initial.
get program name from TCode
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
if not wa_tstc-pgmna is initial.
p_pname = wa_tstc-pgmna.
TCode does not include program name, but does have refereve TCode
else.
select single param from tstcp into wa_tstcp-param
where tcode eq p_tcode.
if sy-subrc = 0.
check wa_tstcp-param(1) = '/'.
check wa_tstcp-param+1(1) = '*'.
if wa_tstcp-param ca ' '.
endif.
w_off = sy-fdpos + 1.
subtract 2 from sy-fdpos.
if sy-fdpos gt 0.
p_tcode = wa_tstcp-param+2(sy-fdpos).
endif.
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
p_pname = wa_tstc-pgmna.
if sy-subrc 0.
message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
endif.
else.
message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
endif.
endif.
endif.
Call customer-function aus Program coding
read report p_pname into sourcetab.
if sy-subrc > 0.
message e017(enhancement) with p_pname raising no_program."#EC *
endif.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
overflow into c_overflow
with includes.
if sy-subrc > 0. "keine/syntakt. falsche Ablauflog./Fehler im Skanner
message e130(enhancement) raising syntax_error. "#EC *
endif.
check I_STOKEN for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '0'.
w_prog = ''.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endform. "DATA_SELECT
& Form GET_FM_DATA &
form get_fm_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get function module data' "#EC NOTEXT
exceptions
system_failure
communication_failure. "#EC *
Function module data
sort i_fmodule by name.
delete adjacent duplicates from i_fmodule comparing name.
loop at i_fmodule where done ne 'X'.
clear: i_stoken, i_sstmnt, sourcetab, wa_tfdir, w_include .
refresh: i_stoken, i_sstmnt, sourcetab.
store function groups
select single area from enlfdir into wa_enlfdir-area
where funcname = i_fmodule-name.
i_enlfdir-area = wa_enlfdir-area.
append i_enlfdir.
Store development classes
if not wa_enlfdir-area is initial.
select single devclass into wa_tadir-devclass
from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = wa_enlfdir-area.
check not wa_tadir-devclass is initial.
move wa_tadir-devclass to i_devclass-clas.
append i_devclass.
endif.
clear wa_tfdir.
select single funcname pname include from tfdir into wa_tfdir
where funcname = i_fmodule-name.
check sy-subrc = 0.
call function 'FUNCTION_INCLUDE_SPLIT'
exporting
program = wa_tfdir-pname
importing
group = w_area.
concatenate 'L' w_area 'U' wa_tfdir-include into w_include.
i_fmodule-pname = w_include.
i_fmodule-pname2 = wa_tfdir-pname.
modify i_fmodule.
read report i_fmodule-pname into sourcetab.
if sy-subrc = 0.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
message e130(enhancement) raising syntax_error.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '1'.
w_prog = i_fmodule-pname2.
w_incl = i_fmodule-pname.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
endloop.
sort funtion groups
sort i_devclass.
delete adjacent duplicates from i_devclass.
sort i_enlfdir.
delete adjacent duplicates from i_enlfdir.
endform. "GET_FM_DATA
& Form GET_SUBMIT_DATA &
form get_submit_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get submit data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
w_level = '0'.
loop at i_submit where done ne 'X'.
check i_submit-pname ne p_pname. " ensure not the same as origianl program
clear: i_stoken, i_sstmnt, sourcetab.
refresh: i_stoken, i_sstmnt, sourcetab.
read report i_submit-pname into sourcetab.
if sy-subrc 0.
delete i_submit.
continue.
else.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
continue.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_prog = i_submit-pname.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
restrict number of submit program selected for processing
describe table i_submit lines w_linnum.
if w_linnum ge p_limit.
w_level = '1'.
endif.
i_submit-done = 'X'.
modify i_submit.
endloop.
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
endform. "GET_SUBMIT_DATA
& Form DATA_SEARCH &
form data_search tables p_stoken structure stoken
using p_level p_prog p_incl.
loop at p_stoken.
clear i_userexit.
tabix = sy-tabix + 1.
i_userexit-level = p_level.
if i_userexit-level = '0'.
if p_incl is initial.
i_userexit-pname = p_pname.
else.
concatenate p_pname '/' p_incl into i_userexit-pname.
endif.
else.
if p_incl is initial.
i_userexit-pname = p_prog.
else.
concatenate p_prog '/' p_incl into i_userexit-pname.
endif.
endif.
Include
if p_stoken-str eq 'INCLUDE'.
check p_level eq '0'. " do not perform for function modules (2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs 'STRUCTURE'.
check not wa_stoken-str cs 'SYMBOL'.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Enhancements
if p_stoken-str eq 'CUSTOMER-FUNCTION'.
clear w_funcname.
read table p_stoken index tabix.
translate p_stoken-str using ''' '.
condense p_stoken-str.
if p_prog is initial.
concatenate 'EXIT' p_pname p_stoken-str into w_funcname
separated by '_'.
else.
concatenate 'EXIT' p_prog p_stoken-str into w_funcname
separated by '_'.
endif.
select single member from modsap into wa_modsap-member
where member = w_funcname.
if sy-subrc = 0. " check for valid enhancement
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
append i_userexit.
else.
clear wa_d010inc.
select single master into wa_d010inc-master
from d010inc
where include = p_prog.
concatenate 'EXIT' wa_d010inc-master p_stoken-str into w_funcname
separated by '_'.
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
endif.
endif.
BADIs
if p_stoken-str cs 'cl_exithandler='.
w_index = sy-tabix + 4.
read table p_stoken index w_index into wa_stoken.
i_userexit-txt = wa_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-type = 'BADI'.
append i_userexit.
endif.
Business transaction events
if p_stoken-str cs 'OPEN_FI_PERFORM'.
i_userexit-type = 'BusTrEvent'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-modname = i_userexit-txt+16(8).
case i_userexit-txt+25(1).
when 'E'.
clear wa_tbe01t.
select single text1 into wa_tbe01t-text1 from tbe01t
where event = i_userexit-txt+16(8)
and spras = sy-langu.
if wa_tbe01t-text1 is initial.
i_userexit-modtext = ''. "#EC NOTEXT
else.
i_userexit-modtext = wa_tbe01t-text1.
endif.
i_userexit-modname+8 = '/P&S'. "#EC NOTEXT
when 'P'.
clear wa_tps01t.
select single text1 into wa_tps01t-text1 from tps01t
where procs = i_userexit-txt+16(8)
and spras = sy-langu.
i_userexit-modtext = wa_tps01t-text1.
i_userexit-modname+8 = '/Process'.
endcase.
append i_userexit.
endif.
Program exits
if p_stoken-str cs 'USEREXIT_'.
i_userexit-type = 'Program Exit'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
append i_userexit.
endif.
Submit programs
if p_stoken-str cs 'SUBMIT'.
check p_level eq '0'. " do not perform for function modules (2nd pass)
check not p_stoken-str cs '_'. " ensure not SUBMIT_XXX
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs '_'. " ensure not SUBMIT_XXX
replace all occurrences of '''' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Perform routines (which reference external programs)
if p_stoken-str cs 'PERFORM'.
check p_level eq '0'. " do not perform for function modules (2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if not wa_stoken-ovfl is initial.
w_off = wa_stoken-off1 + 10.
w_str = c_overflow+w_off(30).
find ')' in w_str match offset w_off.
w_off = w_off + 1.
wa_stoken-str = w_str(w_off).
endif.
check wa_stoken-str cs '('.
w_off = 0.
while sy-subrc = 0.
if wa_stoken-str+w_off(1) eq '('.
replace section offset w_off length 1 of wa_stoken-str with ''.
replace all occurrences of ')' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc 0.
i_submit-pname = wa_stoken-str.
append i_submit.
endif.
exit.
else.
replace section offset w_off length 1 of wa_stoken-str with ''.
shift wa_stoken-str left deleting leading space.
endif.
endwhile.
endif.
Function modules
if p_stoken-str cs 'FUNCTION'.
clear i_fmodule.
check p_level eq '0'. " do not perform for function modules (2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if wa_stoken-str cs 'WF_'.
if wa_stoken-str cs 'IDOC'.
break-point.
endif.
if wa_stoken-str cs 'BAPI'.
i_fmodule-bapi = 'X'.
endif.
replace first occurrence of '''' in wa_stoken-str with space.
replace first occurrence of '''' in wa_stoken-str with space.
if sy-subrc = 4. " didn't find 2nd quote (ie name truncated)
clear wa_tfdir.
concatenate wa_stoken-str '%' into wa_stoken-str.
select single funcname into wa_tfdir-funcname from tfdir
where funcname like wa_stoken-str.
if sy-subrc = 0.
i_fmodule-name = wa_tfdir-funcname.
else.
continue.
endif.
else.
i_fmodule-name = wa_stoken-str.
endif.
read table i_fmodule with key name = i_fmodule-name.
if sy-subrc 0.
i_fmodule-level = p_level.
append i_fmodule.
endif.
endif.
endloop.
endform. "DATA_SEARCH
& Form GET_ADDITIONAL_DATA &
form get_additional_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get additional data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
loop at i_userexit.
Enhancement data
if i_userexit-type cs 'Enh'.
clear: wa_modsapa.
select single name into wa_modsapa-name from modsap
where member = i_userexit-txt.
check sy-subrc = 0.
i_userexit-modname = wa_modsapa-name.
clear wa_modsapt.
select single modtext into wa_modsapt-modtext from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
i_userexit-modtext = wa_modsapt-modtext.
MOH - enhancement to get the project name
clear w_mod.
select single modactmember modactname modattr~status
modattranam modattradat
into w_mod
from modact
inner join modattr
on modattrname = modactname
where modact~member = wa_modsapa-name
and modact~typ = space.
i_userexit-modattr = w_mod.
MOH - eoe
endif.
BADI data
if i_userexit-type eq 'BADI'.
clear wa_sxs_attr.
select single exit_name into wa_sxs_attr-exit_name from sxs_attr
where exit_name = i_userexit-txt.
if sy-subrc = 0.
i_userexit-modname = i_userexit-txt.
else.
i_userexit-modname = 'Dynamic call'. "#EC NOTEXT
endif.
clear wa_sxs_attrt.
select single text into wa_sxs_attrt-text from sxs_attrt
where exit_name = wa_sxs_attr-exit_name
and sprsl = sy-langu.
i_userexit-modtext = wa_sxs_attrt-text.
endif.
modify i_userexit.
endloop.
get enhancements via program package
clear wa_tadir.
select single devclass into wa_tadir-devclass from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = p_pname.
if sy-subrc = 0.
clear: wa_modsapa, wa_modsapt.
select name from modsapa into wa_modsapa-name
where devclass = wa_tadir-devclass.
select single modtext from modsapt into wa_modsapt-modtext
where name = wa_modsapa-name
and sprsl = sy-langu.
read table i_userexit with key modname = wa_modsapa-name.
if sy-subrc 0.
i_userexit-modtext = wa_modsapt-modtext.
i_userexit-type = 'Enhancement'. "#EC NOTEXT
i_userexit-modname = wa_modsapa-name.
i_userexit-txt = 'Determined from program DevClass'."#EC NOTEXT
i_userexit-pname = 'Unknown'. "#EC NOTEXT
append i_userexit.
endif.
endselect.
endif.
Get IDOCs
loop at i_devclass.
endloop.
endform. "GET_ADDITIONAL_DATA
& Form DATA_DISPLAY &
form data_display.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Prepare screen for display' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_userexit by type txt modname.
delete adjacent duplicates from i_userexit comparing txt modname.
format headings
write: 'Enhancements from main program'. "#EC NOTEXT
write: /.
uline.
format color col_heading.
write: / sy-vline,
(12) c_col1, "Enhanmt Type
sy-vline,
(40) c_col2, "Enhancement
sy-vline,
(30) c_col3, "Program/Include
sy-vline,
(20) c_col4, "Enhancement name
sy-vline,
(60) c_col5, "Enhancement description
sy-vline,
(8) c_col6, "Project
sy-vline,
(1) c_col7, "S
sy-vline,
(12) c_col8, "ChangeName
sy-vline,
(10) c_col9, "ChangeDate
sy-vline.
format reset.
uline.
format lines
loop at i_userexit.
set line colour
case i_userexit-type.
when 'Enhancement'.
format color 3 intensified off.
when 'BADI'.
format color 4 intensified off.
when 'BusTrEvent'.
format color 5 intensified off.
when 'Program Exit'.
format color 6 intensified off.
when others.
format reset.
endcase.
write: / sy-vline,
i_userexit-type,
sy-vline,
i_userexit-txt(40),
sy-vline,
i_userexit-pname(30),
sy-vline,
i_userexit-modname(20),
sy-vline,
i_userexit-modtext(60),
sy-vline,
i_userexit-modattr-name,
sy-vline,
i_userexit-modattr-status,
sy-vline,
i_userexit-modattr-anam,
sy-vline,
i_userexit-modattr-adat no-zero,
sy-vline.
hide: i_userexit-type,
i_userexit-txt,
i_userexit-pname,
i_userexit-modname,
i_userexit-modtext.
endloop.
format reset.
uline.
user-exits from development class of function modules
if p_devc = 'X'.
write: /.
write: / 'User-exits from function module development class'."#EC NOTEXT
write: 157''.
uline (90).
write: 157''.
loop at i_devclass.
clear wa_modsapa.
select name from modsapa into wa_modsapa
where devclass = i_devclass-clas.
select single name modtext into corresponding fields of wa_modsapt
from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
format color 3 intensified off.
write: / sy-vline,
(12) 'Enhancement',
sy-vline,
wa_modsapa-name,
sy-vline,
wa_modsapt-modtext,
sy-vline.
endselect.
endloop.
uline (90).
format reset.
endif.
describe table i_fmodule lines w_linnum.
write: / c_fmod , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_func = 'X'.
display fuction modules used in program
uline (38).
write: 157''.
loop at i_fmodule.
write: sy-vline,
i_fmodule-name,
sy-vline,
i_fmodule-bapi,
sy-vline.
write: 157''.
endloop.
uline (38).
write: 157''.
endif.
describe table i_submit lines w_linnum.
write: / c_subm , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_subm = 'X'.
display submit programs used in program
uline (44).
write: 157''.
loop at i_submit.
write: sy-vline,
i_submit-pname,
sy-vline.
write: 157''.
endloop.
uline (44).
endif.
issue message with number of user-exits displayed
describe table i_userexit lines w_linnum.
message s697(56) with w_linnum.
endform. "DATA_DISPLAY
& User Selection Processing &
at line-selection.
get cursor field w_fsel.
case w_fsel.
when 'I_USEREXIT-MODNAME'.
case i_userexit-type.
when 'Enhancement'.
set parameter id 'MON' field i_userexit-modname.
call transaction 'SMOD' and skip first screen.
when 'BADI'.
check i_userexit-modname ne 'Dynamic call'.
set parameter id 'EXN' field i_userexit-modname.
call transaction 'SE18' and skip first screen.
when 'BusTrEvent'.
submit rfopfi00 with attr_typey_selm = 'A'
with event = i_userexit-modname(8)
via selection-screen
and return.
when others.
endcase.
when 'I_USEREXIT-PNAME'.
check i_userexit-modname ne 'Unknown'.
w_off = 0.
find '/' in i_userexit-pname match offset w_off.
if w_off = 0.
set parameter id 'RID' field i_userexit-pname.
call transaction 'SE38' and skip first screen.
else.
w_off = w_off + 1.
w_prog = i_userexit-pname+w_off.
set parameter id 'RID' field w_prog.
call transaction 'SE38' and skip first screen.
endif.
when others.
endcase.
Thank You,
Saritha -
Add push button to Serial number tab in migo transaction
Hi all,
I need to add an upload push button to the tab screen of serial numbers in migo transaction.Is there any exit, or badi,or enhancement spot for this.
Thanks & regards,
Srilakshmi.Hi Ritvik,
you will not need it.
The item methods will process exactly the item what the addional item data are related to. In PBO_DETAIL and PAI_DETAIL, use parameter I_LINE_ID for the item reference.
Note: Not only read SCN etc, also the parameters desciption of the methods used.
Regards,
Clemens
Maybe you are looking for
-
How can I make 10 Copies of my DVD
I have a Mac G5 running system 10.4.7. I am using iLife 6.0.2 and i have Toast 6.0. I have been using iLife for a couple of years and have made many short DVDs using iDVD with no problems. I read an artical in the July, 2005 issue of Macworld on page
-
How to select only one record at a time in ALV
Hi all, I have to use ALV report. Each record on the report output should have a button (or radio button) which will allow the record to be selected. My requirement is to select only one record at a time. please guide me how to proceed further. reg
-
Xorg 1.9 fails to initialize on a usb-installation of Arch [SOLVED]
As a side project, I decided to install Arch on a usb drive. I just installed Xorg (using the group). Thus far, I've run xorg -configure, then moved the xorg.conf.new to /etc/X11/xorg.conf I added in a "Synaptics" section, since this is on a laptop r
-
Admin Pack for windows 8.1 pro
Windows6.2-KB2693643-x86 I'M not able to install in win 8.1, getting error
-
Hi All, I am trying to extend the size of c3k database in my system. I tried like the above screen short but it could not work because the increament button is disable. how can i increase the size? can any one help at this?