MIGO unable to auto calculate component consumption qty

Dear Gurus,
During GR against a subcontract PO, the assembly quantity is reduced due to partial delivery however the components qty is not automatically reduced against the BOM requirement.
Is there any missing settings out there ?
Please kindly advice. Appreciated!!!

Hi Karthick,
The material was not issued against the reservation. However the Production Order was given on the second screen of MB1A T Code. This production order can be seen in the Documented Goods Movement and MSEG table. In MSEG table the reservation number field is empty.
No confirmations were done. Also no GR was done.
Regards,
Rohit.
Edited by: Rohit Chauhan on Apr 15, 2009 11:23 AM

Similar Messages

I receive the error: Unable to load block component C:\Program Files\Hyperception\VABINF\KeyRcv.dll

I have two Major issues with our Infinity Project computers,
We have one entire lab that is getting this error... "Unable to load
block component C:\Program Files\Hyperception\VABINF\KeyRcv.dll.
Please verify that the component exists and any dependencies it may
have are satisfied." It is also producing this error with
NumEntry.dll. Both files exist. I am not sure what
dependencies these files may have. Ideas?
We have several systems that are giving the following error on one of
our labs... "You have exceeded the number of block functions allowed by
VAB for Infinity; contact Hyperception regarding upgrades." From
what The professor here at UTA told me when I first took on this
project, this was a problem that we had on the previous boards and that
someone at Hyperception was able to help us resolve this problem.
Can you help out with these issues? The first one I need an answer today if possible.
Thanks,

We have seen this type of problem on some computers (we do not know why as of yet).The problem with missing blocks is very likely being caused by file permissions, and can be seen when non-administrators are using VAB software. To resolve this: 1. login as ADMINISTRATOR 2. run the command line script from a DOS prompt as shown below: cacls "C:\Program FIles\Hyperception\VABINF" /T /E /G Everyone:F It will scroll through the name of every file in the provided directory, and all subdirectories. This should reset every file, and allow the USER to access all files in VAB software. This should correct the problem. Regards,Steve

Unable to read software component versions from System Landscape Directory

Hi XI,
Once I could import software component version but now I can't. Maybe I did something wrong in SLD.
Could you please give me some hints?
Thanks,
Bruce

hi,
i have also problem with "import software componenet version "
i got a message like
"unable to import software component version from
system landscape directory ......."
than i gone for SLDCHECK...i got an error it is ............
calling function LCR_LIST_BUSSINESS_SYSTEM
Retreiveing data from the sld server function call returned exception code 4
connection to sld does not work
check sld function and configuration
what that i have to do ...to make it work ....please give me any solution for that please give me detailed info
with regards
Edited by: praneeth mamgunta on Jun 27, 2008 4:04 PM
Edited by: praneeth mamgunta on Jun 27, 2008 4:07 PM

Unable to read software component version from System Landscape Directory "

I've worked in past creating/importing SWCV, but this is new system PI7.0 and stuck.
A) Is my understanding on resolution correct?
Should I go and apply notes 940309 and create client copy of existing client 001
                                    OR
change role of client 001; SXMB_ADMIN -> 'Integration Engine Configuration' to 'Integration Server'
I have no problem in using client 001 as Integration server, all I want is import of SWCV to work. Thanks. Appreciate the help.
B) Here is what I have done and the error:
1) Followed weblog below and created product, software component, technical system, business sytem in SLD.
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
2) When I import the SWC from integration repository getting error
(Unable to read software component version from System Landscape Directory "server:5<system number>00").
C) Pointers used from the forum to debug the issue, but still no luck
Below are the points checked from the forum and all steps are correct, but still have issues with the import
1) check the RFCs SAPSLDAPI, LCRSAPRFC, connection test pass as the program ID registered with Jco
2) T-code SLDCHECK no errors (followed http://help.sap.com/saphelp_nw04/helpdata/de/78/20244134a56532e10000000a1550b0/content.htm)
3) T-code SLDAPICUST got user PIAPPLUSER, pwd is correct (reset the pwd)
4) logged using PIAPPLUSER http://server:port/sld and it works
5) One of the weblog SLD Check Failed (LCR_LIST_BUSINESS_SYSTEMS function doesn't work) referred to apply notes 940309
Notes: 940309
You are installing 'SAP NetWeaver 2004s SR1 ABAP+Java' Usage Type 'NetWeaver Process Integration (PI)'.
You don't want to use the default client 001, but another client as Integration Server.

applied portion (PIPostInstallProcess) of OSS notes 940309 and it resolved.
Note:
I still retained client 001 and didn't do client copy as mentioned in the notes. The wizard based CTC tool helped. Here are the details if someone has similar issue and want to know further details:
A NetWeaver Process Integration (PI) Installation (ABAP+Java) has two parts: Installation and configuration. The former is done by the Installer, the latter by the 'Central Template Configuration' (CTC) Tool.
http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
1.      Call the wizard-based configuration tool as described in Configuration Wizard.
       2.      Select the scenario PI and the task PIPostInstallProcess.
       3.      Choose Execute.
A list of the steps to be executed by the wizard is displayed.
       4.      Choose Install.

Unable to read software component versions from System Landscape

Dear all,
I have an ECC system with ABAP and Java installed.
I already configured so that SLDCheck, RFC destination configuration run successfully.
PIAPPLUSER is not locked and can logon.
However, when I import software component version in Integration Builder, the system return error message "Unable to read software component versions from System Landscape Directory "Server:50000".
Please tell me how to correct this error.
Giang

Hi,
Check this
http://****************/Tips/XI/SWComponentError/Resolve.htm
"Unable to read software component versions from System Landscape Directory
Unable to read software component versions from System Landscape Directory
unable to import from SLD
Regards
Seshagiri

I am trying to install iiji reactor but it install but at then end it fails and it say following Feature: ijji Auto Installer Component: iAIFile1 File: C:\Program Files (x86)\Mozilla Firefox\Plugins\ . Please help how i can remove this file at plugins.

When i try to install ijii reactor it install almost ill end but then fail error is following:
Feature: ijji Auto Installer
Component: iAIFile1
File: C:\Program Files (x86)\Mozilla Firefox\Plugins\
How i i remove this file because it says thath already exist?

You need to download this file: http://www.ijji.com/hanstartguide4ie.nhn
Run it and it'll remove the browser plugin from Firefox. Then re-run Reactor installer.

My music playlist unable to auto play while plugin to my car devic which all the while by using the previous iOS i never encounter this problem. After I upgrade to iOS 8 the problem is annoying me...

After upgrade my iPhone 5 to iOS 8 my music playlist unable to auto play while I plug in to my car device. I've to manually click play on my phone in order to listen song as well as i unable to use my car device to control next song previous song as well as other playlist. I must use my phone manually to change it Which this is annoyin!!!!! Pls

Press '''START + R''' in keyboard to open the '''Run''' box(or '''start''' then '''run''') , type in the RUN box '''%APPDATA%''' (or copied in just i wrote, bold text) then click '''OK'''. A Windows Explorer window will appear, in this window, choose '''Mozilla''' then '''Firefox''' then '''Profiles'''. Each folder in the "Profiles" folder (e.g., "xxxxxxxx.default") is a profile on your computer (maybe is one file if you have only one profile).
see for more info : [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile folder - Firefox ]
try it, good luck
thanks again

Customer credit memo can't auto calculate the net due date

Hi all,
Our user used F-27 to entry customer credit memo (PK = 11),
[F-27|http://www.flickr.com/photos/44956360@N08/5206144134/]
and payment term use net 60 days,
[F-27 - screen 2|http://www.flickr.com/photos/44956360@N08/5206144210/]
but the system display the net due date doesn't add 60 days
[F-27 - screen 3|http://www.flickr.com/photos/44956360@N08/5206144292/]
To use fbl1n display the net due date doesn't add 60 days
[FBL1N|http://www.flickr.com/photos/44956360@N08/5206144344/]
Why the system can't auto calculate the net due date when user used PK = 11, but If user use PK = 01, the system can auto calculate the net due date.
Best regards,
Eric

Hi Henri,
I found the answer, when user enter the original document number in reference field of credit memo, the system can auto calculated the net due date!
no reference doc
[PIC1|http://www.flickr.com/photos/44956360@N08/5208025267/]
input reference doc
[PIC2|http://www.flickr.com/photos/44956360@N08/5208623198/]
Thanks for your help.
Best regards,
Eric

PDF form column has dollar amount how can I line up numbers and have auto calculate?

PDF file has columns that have dollar amounts. I can not get it to line up or add up automatically.

Line up: In Form Edit mode, select the fields, then right-click one of them and select Align, Distribute or Center and then one of the Align options.
Auto-calculate: Again, in Form Edit mode, right-click a field and select Properties. Go to the Calculate tab and you'll see various options. The first one is the easiest to use for simple calculations. The other ones require more detailed instructions.

How system calculate the required qty. after MRP RUN

Hi,
I want to know if we are using MRP Type as PD and also we are calculating automatic saftey stock and re order point qty. after MRP RUN according to which rule formula system calculate the safty stock, reorder point qty. and the required qty. as a PR.
and if we are not using calculate safety stock automatically and if we set safety stock qty. manually in this case how system will calculate the required qty.
regards,
zafar

please check the below links.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/6f/b441a9a1b011d3a82d0000e82a3c24/content.htm\
http://help.sap.com/erp2005_ehp_04/helpdata/EN/f4/7d256344af11d182b40000e829fbfe/content.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/ff/515c4749d811d182b80000e829fbfe/content.htm
please check the above links may get some idea.
Regards,

Proxy error- unable to find software component version for namespace-

Hi all,
I need help regarding proxy.
I am using SAP standard package for one integration PI 7.0 to SRM.
Here we need to use the datatype enhancement for adding some fields. So I create one extension_datatype in the datatype enhancement and add the fields .
( I am using Inbount interface, where I am adding the new fields in PI)
Now when I go to SRM system and Run SPROXY system to regenerate the Proxy. So that It can reload the New fields.
Then it reloads and We activate the same.
Now at one place when I clicked the data type enhancement object its giving the error that unable to find software component version for namespace" . I did not understand why its giving the error. I added the new fields in the existing running datatype enhancement. and reload the reproxy.
I have one more datatype enhancement object in the same software component and in the same name space but its not giving the error.
Please help , how to resolve it asap.
regards
ram

1.the datatype enhancement object may not be activated in the same software component .
for this try these -
after creating your data types and designing part. First close all the developement objects windows.
then click on your sw component which you have created and activate it very first.
then you will be able to activate all other objects
or when you start activating your data types a new window with list of the objects which you want to activate opens
in this new window you can see your sw component as the very last object select it first and activate it
2. update the cache in both system
i think these 2 reasons.u try it.

Unable to import software component version from sld

hi,
i have also problem with "import software componenet version "
i got a message like
"unable to import software component version from
system landscape directory ......."
than i gone for SLDCHECK...i got an error it is ............
calling function LCR_LIST_BUSSINESS_SYSTEM
Retreiveing data from the sld server function call returned exception code 4
connection to sld does not work
check sld function and configuration
what that i have to do ...to make it work ....please give me any solution for that please give me detailed info
with regards

Hi,
Make sure you have did all the configuration.....
http://help.sap.com/saphelp_nw70/helpdata/EN/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm
cheers
Sunil.

Unable to retrieve topology component health states

Hi,
SharePoint 2013 SP1 + Sep 2014 CU and SQL Server 2012 SP1
i have created search service application using power shell and also using central administration but both times i am getting following error message when access search service application.
Unable to retrieve topology component health states. This may be because the admin component is not up and running
Pls guide how to fix it
thx
iffi

Hi Imughal,
This issue can be caused by many reasons, please check ULS log for detailed error message.
If the issue is caused by Event ID: 6482 error “A call to SSPI failed, see inner exception”, then
it can be caused by the following reasons:
The timer service account is trying to communicate with HostController service and generates 'SSPI Connect' call demanding SPN to be created for target services Identity, if no SPN is found.
The Hostcontroller service's NodeRunner process is limited to use restricted amount of RAM.
Then please follow the steps in the link below for solving this issue:
http://blogs.msdn.com/b/bkr_sharepoint/archive/2014/06/09/sharepoint-2013-search-topology-activation-error-quot-unable-to-retrieve-topology-component-health-states-this-may-be-because-of-the-admin-component-is-not-up-and-running-quot.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How to create Auto suggestion component by using of ADF tag

Hi ,
In my project, I am using the ADF frame work and I need to use the auto suggestion component.
Can any body suggest me how to create Auto suggestion component by using of ADF tag.
Waiting for your valuable suggestions...

Try this forum:
JDeveloper and ADF
You might get a lot more response.
Jan Kettenis

Unable to retrieve topology component health states. This may be because the admin component is not up and running.

Unable to retrieve topology component health states. This may be because the admin component is not up and running.
I have deleted Search Service App and created again.
But still same error can anyone give me check list.. I need it very urgently.
Please reply
Thanks
Raj

Hi Raj,
This issue can be caused by many reasons, so please check the ULS log for detailed error message.
For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Here are some similar issues and the corresponding solutions for you take a look:
http://blogs.msdn.com/b/bkr_sharepoint/archive/2014/06/09/sharepoint-2013-search-topology-activation-error-quot-unable-to-retrieve-topology-component-health-states-this-may-be-because-of-the-admin-component-is-not-up-and-running-quot.aspx
http://blogs.msdn.com/b/sambetts/archive/2013/08/28/sp2013-win2012-unable-to-retrieve-topology-component-health-states-this-may-be-because-the-admin-component-is-not-up-and-running.aspx
http://techtrainingnotes.blogspot.com/2013/09/unable-to-retrieve-topology-component.html
Best regards.
Thanks
Victoria Xia
TechNet Community Support

MIGO unable to auto calculate component consumption qty

Similar Messages

Maybe you are looking for