MIGO user exit to get serial number

Hi Experrts:-
I need to change the status of serial number (equipment number ) during Migo (good receipt,Transfer posting).
I have checked all the user exits and number of badis but i am not getting serial number at run time if i get serial numbar
in exit od badi i will change the status
I have used following badi:-
MB_DOCUMENT_BADI
MB_MIGO_ITEM_BAdI
Thanks

Hi ,
m also using GET_SERNOS_OF_DOCUMENT
but not getting serial number.
need to get serial number in MIGO.
how to pass parameters to this fm.
KEYDATA-TASER = 'SER03' "Goods mvmnt
KEYDATA-SDAUFNR = ??
KEYDATA-POSNR   =   ??
CALL FUNCTION 'GET_SERNOS_OF_DOCUMENT'
   EXPORTING
     KEY_DATA                  =
TABLES
   SERNOS                    =
EXCEPTIONS
   KEY_PARAMETER_ERROR       = 1
   NO_SUPPORTED_ACCESS       = 2
   NO_DATA_FOUND             = 3
   OTHERS                    = 4
please guide..

Similar Messages

MIGO: user exit for checking batch number

Hello,
When using MIGO to do goods receipt (101 mvt) I need a user exit in each time a line is added to check the batch number entry. If the batch number is empty for certain materials issue a error message to the user.
Thanks,
Peter

where is your problem then?
If you create batches automatically with 101 ,then each line will get its batch from SAP, no need to check if there something entered manually.
Why do you customize auto creation of batches, while you want the user to enter the batches manually?
can you give a bit more background?

MIGO( (good receipt,Transfer pos how to to get serial number at run time

Hi Experrts:-
I need to change the status of serial number (equipment number ) during Migo (good receipt,Transfer posting).
I have checked all the user exits and number of badis but i am not getting serial number at run time if i get serial numbar
in exit od badi i will change the status
I have used following badi:-
MB_DOCUMENT_BADI
MB_MIGO_ITEM_BAdI
Thanks

Hi Dilip,
If I am correct you are taking about changing user Status at device level (serial number)
you can set the user status through status profile (Tcode OIBS for particular status profile).
within this, you can also set/ change the status, if particular business transaction is executed (for e.g. good receipt, Stock transfer)
Please check if you are using status profile in your case, if not create one, by this way i think you can able to map the requirement.
Regards,
Chetan

MIGO to get serial number at run time

Hi Experrts:-
I need to change the status of serial number (equipment number ) during Migo (good receipt,Transfer posting).
I have checked all the user exits and number of badis but i am not getting serial number at run time if i get serial numbar
in exit od badi i will change the status
I have used following badi:-
MB_DOCUMENT_BADI
MB_MIGO_ITEM_BAdI
Thanks

Depending on your needs, you need to put below code in a different UserExit or BAdI :
types: begin of ty_s_goserial, "Cfr. INCLUDE 'LMIGOKE1' for 'trx. MIGO
 selected type xfeld,
 serialno type gernr,
 uii type uii_char72,
 subrk type xfeld,
 end of ty_s_goserial.
data: lt_goserial type standard table of ty_s_goserial with non-unique default key.
data: ls_goserial like line of lt_goserial value is initial.
field-symbols: <fs_goserial> like lt_goserial. "type goserial.
unassign <fs_goserial>.
"Get the SERIALNOs via trx.MIGO-itabs ('GOSERIAL')
assign ('(SAPLMIGO)OREF_DETAIL->T_GOSERIAL') to <fs_goserial>.
loop at <fs_goserial> into ls_goserial.
"do your checks or whatever ...
endloop.
Check the possible 'enhancement points' via break-point in the "CL_EXITHANDLER"-class, method 'GET_INSTANCE' code-line 28 (SY-SUBRC) when running trx. "MIGO". As you can clearly see, this is only applicable when running trx.'MIGO'.

Getting serial number box while transfer post in MB1A but not while doing MIGO

Hi Team
I am getting serial number box while transfer post in MB1A.
But getting below error under serial number tab while doing GR through MIGO of outbound delivery.
Issuing plant and receiving plant, material, batch, qty are same in both cases.
How can I get serial number box when doing GR? Does any customizing changes needed?
Br, Kiran U

Movement type is different for those two screen shots, also you are saying you are using MB1A, but you are using 301 movement type. Generally 301 movement type is not allowed from MB1A t-code.
Please check these SAP notes if relevant for your case.
856548 - MIGO: you cannot enter serial numbers
856662 - T156Q: Missing entries

I have downloaded Photoshop elements 5.0 to a new PC. I recieve error message: "Your Adobe Photoshop Elements user name, organization, or serial number is missing or invalid. The application cannot continue and must now exit."

I was referred here by customer service. I have downloaded Photoshop elements 5.0 to a new PC. After accepting the agreement I receive an error message saying "Your Adobe Photoshop Elements user name, organization, or serial number is missing or invalid. The application cannot continue and must now exit." There is no place to enter the serial number.

All your pictures will remain safe even after uninstalling the program. Your pictures are saved to your system in form of catalog present at C:\ProgramData\Adobe\Photoshop Elements\Catalogs\<your catalog> When you reinstall the program you can open this catalog and view all your photos again.

HELP ASAP!! PSE5 "elements user name organization or serial number is missing or invalid. thsi application cannot continue and must now exit

HELP!!!! I am a graphic designer I LOVE my version of Photoshop elements 5... I am also a Mom of two who depends on my party supply business as my only income currently!!!!
Upon opening to work on a party supply order DUE TODAY for a kid's first birthday I got this ERROR MESSAGE:
"Your adobe photoshop elements user name organization or serial number is missing or invalid. This application cannot continue and must now exit" And then closes.....
I don't know where my disc is to uninstall/reinstall since I got this program Oh say 10 years ago.... WHAT DO I DO!!? I am in complete PANIC mode!
Anyone?! Chat said they couldn't help me it's too old?!?! HELP

Hello ...Mom,
here you will find (if stored at Adobe) "General infos about your Adobe Account" https://www.adobe.com/account.html. To see what Adobe has saved about your serial number, please have a look there: http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
On the other hand you could use a non Adobe program, like
Belarc Advisor - Free Personal PC Audit, for software, hardware and security configuration information on your computer.…
If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
Good luck!
Hans-Günter

User name, organization, or serial number is missing or corrupt. FIX

Regardless of how this is happening--or why----it IS happening every time I try to run Adobe Photoshop elements 4.0. I purchased the program back in October, 2005 and have never been able to use it for more than a day or two. Without fail, I will open the program and get the message: Your Adobe Photoshop elements user name, organization, or serial number is missing or invalid. The application cannot continue and MUST now exit. And, believe me, it EXITS immediately! In the past I have only been able to completely uninstall the program and then reinstall it---until the point where the program no longer appeared in the ADD/REMOVE programs of the control panel--although it was installed but not working. Apparently, registry cleaners can be the culprit, but I did a complete "CLEAN" install of Windows XP Professional/SP2 and started from scratch with ABSOLUTELY NO OTHER PROGRAMS INSTALLED EXCEPT ELEMENTS 4.0. The program worked for all of one day before I, again, got the error and could no longer use the program. Therefore, I can NOT blame registry cleaners alone. There is something inherent in Windows XP that causes this problem. Through this forum I was able to identify the exact registry key causing the problem:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{EBB7C1C1-D439-4D9B -9FDC-954C10F266B0}
I was able to go to "regedit" (without the quotes) from the "run" menu and find this key (when the program was working). Highlight the key by clicking once on it and then go up to "file". Next, click "export" and save this key to notepad, Word or my documents---any place you know you can find it. I named it Adobe reg key.reg. The next time the program stops working, go to regedit---then to "file" and then "import". After clicking "import", find where you saved the key and click on it. This should import the key directly back into the registry where it belongs and the program should start working again. So far this has worked for me at least 5 times. There must be some fix for this-----from Adobe----soon. With this key exposed, what's to stop anyone from downloading the trial version, and then writing this key into the registry themselves. It's basically called a "crack" and could be used by anyone seeking to avoid paying for the program---SO----Adobe really needs to address this issue. I am totally against anyone stealing software in any way, shape or form, and I think this is what will happen unless Adobe gets a handle on this issue.

Let me get this straight: Every time your PE4 stops working you have to do a registry edit to get it to work again? That's insane!!!
I can sympathize with you, I've suddenly had similar problems with PE3 and have gotten little help from Adobe other than to be pointed to countless forum threads which do not answer the questions or solve the problem. Strangely it worked for several months before crashing and refusing to work again, not even able to re-install it.
I was pointed to your thread because I was told it was probably my registry cleaner that caused my problem with PE3, obviously they didn'r really read your post.
thanks, and good luck. I've gone back to PE2, at least it works and lets me get on with my workflow, which was being severely hampered by having to spend all my time searching for answers that don't seem to exist.

User Name, Organization, or serial Number not valid

I have windows 8
I own 4 disc Creative Suites 2.0
I installed the program.
All programs open but Photoshop.
I get the Error: "Your Adobe Photoshop user name, organizaiton, or serial number is missing or invalid. The application cannot continue and must now exit."
I uninstalled it.
Installed the online free version.
Same error.
Uninstalled that, and reinstalled my version.
Looked for the the database file expressed in solution 4 of the following web page
http://helpx.adobe.com/photoshop/kb/startup-error-photoshop-cs2-mac.html
Can't find the file they are talking about.
Need some help. Don't want to upgrade. Paid a lot of money for this version and I know it inside and out.
Just want to use it only.
Thanks for any help.
It worked a week ago by the way... Not sure what has happened for this to start up....
Thanks,
Jeff

I found the fix:
Uninstall all versions of Adobe cs2
When prompted for the install location you need to know what the "Updated Syste" is calling your install directory.
Most of the time it is: PROGRA~2
So you need to change your install location to :
c:\PROGRA~2\Adobe
Then go through the rest of the install as normal and BAM! Photoshop will work without anymore errors.
Thanks to this article I was able to figure it out:
http://planetmediocrity.com/2013/01/installing-photoshop-cs2-on-windows-7-64-bit/
If only the people at Adobe help centers were this educated....
I like to buy software and use it. NOT keep buying software updates and upgrades. Especially when the software is between 600 and 1000 dollars. For those prices it should ALWAYS work.

Cs2/Windows 7x64 - User name, organization, or serial number is missing or invalid?

Ok, I'm at my wits end on this one. I've installed and reinstalled this CS2 suite multiple times, tried to find the proper registry keys, pretty much anything i can think of to get this to work, but every time I go to boot up one of the programs in the suite (such as Photoshop) I get an error stating "Your Adobe Photoshop user name, organization, or serial number is missing or invalid. The application cannot continue and must now exit". There is only an OK box, and absolutely no way for me to look at the licensing information to see what it's getting hung up on.
I've confirmed everything is correct upon installation. I can't find an e-mail address for Adobe's customer support so I'm asking you guys - what the hell is going on with this software? Anyone fix this before?

@exshopper
A few quick items:
(1)     I genuinely hope you find satisfaction with PaintShop Pro and that it meets your needs, whatever they are.
(2)     Bob Levine is not and has never been an employee of Adobe Systems Incorporated. He does speak his mind and certainly lets Adobe know when our products and policies need improvement. Without attempting to put words in his mouth, I think you may be objecting to the fact that he does understand the needs of software developers in terms of marketing and supporting their products and the value of same to customers. He does rightly point out that the monthly subscription costs for the tools they use to earn their living usually amount to far less expenditure than many if not most creative professionals spend each day on their favorite beverages. There is still a major failure of many computer users to comprehend the cost of development and support of software simply because software isn't “tangible” in the way computers, printers, and other peripherals are.
(3)     When you refer to purchasing “the CS2 suite for 1500 pounds (over $3000 back then)” I assume that you are referring to the Creative Suite 2 Premium which included every creative product that Adobe had at the time including InDesign, Illustrator, Photoshop, GoLive, Version Cue, Bridge, Acrobat, etc. The “back then” was early 2005, nearly a decade which is an awful long time in this industry. If you “bought” the product more recently than eight years ago, much less five years ago, you already were purchasing something that was no longer current. And you certainly could not have purchased it from Adobe.
(4)     I am sorry to read that your “computer died.” Was that computer nine years old? To be consistent with your expectations of Adobe, hopefully you expected your computer's manufacturer to continue to support that computer with a free or reduced cost repairs and/or replacement because you spent so much money on that computer. And of course you expected that new computer would run the exact same OS as your dead computer and support all your old peripherals including SCSI drives, diskettes, etc.
(5)     Whether you or even I like it or not, the subscription model better reflects the reality of development, distribution, and support of software. Under the previous “perpetual license” scheme, you paid for a license to use the software for perpetuity on the hardware and software (i.e., OS) platforms for which it was developed and tested, nothing more. Unfortunately, the expectations of many of our customers was that somehow Adobe would provide free updates to their current program versions to provide support for future incompatible hardware and operating system platforms. However, that is a totally untenable business model. In contrast, many high end software applications (not graphic arts applications) not only charge for a license, but have a requirement for payment of either a monthly or annual maintenance contract which cover most such hardware/OS upwards incompatibility contingencies. The subscription model currently in-place basically eliminates the up-front licensing and a maintenance contract with a simple monthly fee that provides access to all updates and upgrades. It is fairly clear and simple.
(6)     In terms of your costs over time, you didn't indicate which aspects of “CS2 suite” you were using, but given your apparent emphasis on image editing, Adobe does offer a very attractive subscription that includes both Lightroom and Photoshop. Even if you don't use Lightroom at all, it is still a great price even just for Photoshop.
          - Dov

Error: "...user name, organization, or serial number is missing or invalid..." when you start Photos

MacIntosh photoshop CS2
Issue
When you start Adobe Photoshop, the application returns the error message, "Your Adobe Photoshop user name, organization, or serial number is missing or invalid. The application cannot continue and must now exit."
Detail
Photoshop previously started without error.
There is supposed to be a patch for this error message but I have not been able to find it. Help!

Without proper system information and other technical details nobody can tell you anything. As a start, read this:
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Mylenium

User exit to get pop-up in co09

hello,
i have a question.
is there an user exit to get a pop-up in co09? we don't wanna check availability in order. we only want check material status in co09.
thanks a lot
best regards

Believe it or not, I've done this successfully.
The exit is
EXIT_SAPLIE01_007
This fires after save/post and I used it to pop a custom screen to get some custom data.
If you want to use the custom data from the screen in a custom update, you'll have to export to...database and import the data back in the MIGO update BADI or exit. (If your prod instance isn't multi-server, then you can use export to shared buffer.)
I didn't find this exit on my own - it was suggested here - I think by Suresh or Narendran or aRs or NXO.

User-exit wich modify batch number in vl31n

Hi,
I have another question.
What is user-exit wich modify batch number in vl31n transaction ?
Regards,
Greg.

Hi
Find the available exits with the following program:::
*& Report ZFINDUSEREXIT
report zfinduserexit.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
execute this code.
type the transaction. u will get the user exits
If there are no available user exits you could go for badi's.
To search for a badi, go to se 24 display class cl_exithandler. double click on method get_instance, get a break point on case statement. execute and start the required transaction in new session. look for variable exit_name. It would show the available badi's.
regards
ravish
plz dont forget to reward points if helpful

I purchased Adobe Photoshop Elements 12. Logged in and can not get serial number. Says it is incorrect. Going in circles.

Can't get serial number for Photoshop Elements. I'm logged in. I have a redemption code and also codes on the back of the box. nothing works and am running in circles. I want to install and use it and can't because I can't get the correct serial number. On the front of the box it says use the card (with redemptiom code to receive the serial number.HELP!!!

Dear Brian,
I activated my product in August of 2014. I had it a few months, October, when my computer crashed. Therefore I had to go back to Adobe tell them what happened, and then until December I had noticed that it said that I had a trial copy. I was not worried, as I had the serial number. it was working, but in January I got a message that my "trial" copy had expired.
At that time I had contacted Adobe and was told that because it was beyond the 3 months, they would no longer help me.
Therefore, at one point, when the computer crashed, I had not deactivated the program. But Adobe had gotten it working for me again.
I do not know what happened between October and December to have changed the software from a real copy to a trial copy.
Now to your patient questions.
As you wrote, that is what happens to the point of getting the trial copy, but when I follow the process through, I get a message that my "trial copy has expired". When I go the the editor, the whole process loops again, sign in, trial copy, licence page, add serial number, then the message that the trial has expired.
When I got that message the first few times months ago, I went back to the Adobe web site and downloaded another copy. (I have done this numerous times) It still said that I had a trial copy and that it had expired, there is a box to licence this software, when I click that, I have to sign in again, This time I also had gone to the Adobe web site signed in and left it open, while I put in the serial number, hoping that would help (have also tried that before). It waits and then the Editor/Organized box comes up again. When I go to the Editor, it tells me that this is a trial copy which has expired and it starts all over again.
I was so frustrated, that I waited a couple of months to try it again. The thinking was that there was some glitch that would work it self out and I could again down load a clean copy of the original, not a trial. (I do not know how I keep getting a trial copy of PSE 12, as it is not even offered on the site.)
The crazy thing is this morning when I turned on my computer, I had an update for the Adobe PSE 12 and Camera Raw. Probably because I had downloaded a copy again.
When I go the the web site to down load a copy of the PSE !2, I am doing it from the My accounts/ products page and downloads. I have left the web page open to copy the serial number from that page, although it always matches my notes.
ThanksT

User Exit not getting triggered

Dear all,
we are creating a workflow for PR Release which needed release strategy customization. so we are trying to set the release stratagy by changing the communciation structure CEBAN-USRC1 field.
for this, i had done the following things:
1. SMOD->M06B0005->components->EXIT_SAPLEBND_004->INCLUDE ZXM06U31 (double clicked) wrote few lines of code.
2. CMOD-> created a proj ZMM_PREL->assigned Enhancement M06B0005 under enhancements tab-> EXIT_SAPLEBND_004-> activated all
(User exit, project eveything).
Now my problem is when i create a PR, this user exit does not get triggered at all. I am working on ECC6.0 the same code which i did in Ecc5.0 for my previous client is still working fine.
Can anyone please guide me where i might have gone wrong?
Thank you,
Regards,
Lakshmi

Hi,
HAve u verifiyed that the user-exit u r using is triggered whenever u create ou PR.?
First of all u have to put breakpoints at each and every user-exits provided for that transaction, then check which user exit is getting triggered when u carete ur PR. and thenafter write ur code in this user-exit only.
Reward is useful.
Regards,
Harsha

MIGO user exit to get serial number

Similar Messages

Maybe you are looking for