MIGO without FI posting

Dear All,
Is there any way for entering a Goods Movement (MIGO t. Code), without posting it to FI?
Thank you and Regards!

Hi,
Yes, you can!
During creation of Purchase order, you can select "GR Non Valuated" check box in the Delivery TAB of Purchase order and do goods receipt which result no accounting entries.
OR
If you are creating Purchase order with account assignment category,then use t.code:OME9,
select your account assignment category and select check box of "GR Non-Valuated" & save.Do PO creation with your account assignment category and go for goods receipt which result no accounting entries
Regards,
Biju K

Similar Messages

  • Vendor down payment clearing without VAT posting.

    Hello SAP Gurus,
    I have following issue:
    Currently our Vendor down payments produce VAT postings when clearing with final invoice, which is correct.
    But we have some old vendor down payments which does not include VAT and needs to be cleared without any impact to VAT postings.
    User is using F-44 transaction and can not define any tax code for postings, system calculates it automatically.
    It is not possible to make VAT posting happen and then make reversal postings fot VAT accounts as well.I tried to check flag 'Posting without tax allowed' and uncheck 'Post automatically only' in account master data. And then make manual posting using that account via FB01 but system still requires tax code to be entered because Tax category in account master data is set to '<' I'nput Tax Account'. It is impossible to change Tax category let's say to ' * ' because account have balances on it.
    Could anyone advice how can I clear these downpayments without VAT posting?
    Thank you,

    I have tried to enter 0% input tax code, but still I'm not able to post document because of error msg:
    Tax entry not possible in this item
    Message no. FF724
    Diagnosis
    You can not enter a tax amount in this item since, due to the posting amount entered and the tax code, a total tax amount of zero has been calculated.
    This could either be due to the fact that the tax code has been defined with a value of 0%, or because the posting amount entered (that is, the tax base) is too small.
    Example:
    With a tax rate of 15%, a tax amount greater than zero will only be achieved with a base amount greater than 0.04. With values of 0.03 and less, it is therefore not possible to enter a tax amount.
    Procedure
    Only enter tax amounts in conjunction with tax codes for which a percentage rate not equal to zero has been defined. Make sure that in documents with several G/L account items you enter the total tax amount in an item with a sufficiently high posting amount.

  • The "Without Qty Posting" check box appears disabled in A/P and A/R credit Memo Rows

    Dear All,
    The "Without Qty Posting" check box appears disabled in A/P and A/R credit Memo Rows even when set visible and active in the form settings. Please advice. SAP Business One version 8.82 PL 13
    regards
    Deb

    Hi,
    Please check:
    The field is available only in the following
    cases:
    1. A/R credit memos not based on other documents or
    2. A/R credit memos based on an A/R invoice or
    3. A/R credit memos based on an A/R reserve invoice, for which items have been delivered, and
    4. if non-drop-ship warehouses are used
    Thanks & Regards,
    Nagarajan

  • Input Excise SHECess not showing in MIGO & Excise Invoice posting, where I made a mistake ?

    Input Excise SHECess not showing in MIGO & Excise Invoice posting, where I made a mistake ?
    1.At the Time of MIGO,In Excise Invoice tab SECess Hide in reight side of the Screen
    2. At the time of J1IEX, Complete Input Excise SECess Line item is not appere in screen
    Please give the solution
    Regards
    Maran

    Hi,
    Please check following :
    1. Whether the AT1 indicator is active for Excise Registration number under CIN customizing
    Path
    IMG --> Logistics - General --> Tax on Goods Movements --> India --> Basic Settings --> Maintain Excise Registrations
    2. Whether the AT1 condition is maintained in Maintain Excise Defaults against tax procedure
    Path
    IMG --> Logistics - General --> Tax on Goods Movements --> India --> Basic Settings --> Determination of Excise Duty --> Maintain Excise Defaults
    3. Whether the AT1 condition is maintained in Specify Excise Accounts per Excise Transaction against excise transaction type
    Path
    IMG --> Logistics - General --> Tax on Goods Movements --> India --> Account Determination --> Specify Excise Accounts per Excise Transaction
    4. Whether the AT1 G/L account is maintained in Specify G/L Accounts per Excise Transaction
    Path
    IMG --> Logistics - General --> Tax on Goods Movements --> India --> Account Determination --> Specify G/L Accounts per Excise Transaction
    5. Check whether in condition for AT1 is maintained in FV11.
    6. Check whether AT1 setoff percentage is maintained (this is applicable only in case you maintain setoff conditions).
    7. Check whether AT1 percentage is maintained in conditions tab of Purchase Order.
    8. Check whether tax code is maintained in FV11 for AT1 condition maintained.
    Please check and revert in  case of any clarifications.
    Regards,
    Tejas

  • How to GRN date (MIGO) and Goods posting date (MB1C) as a Characteristcs

    Dear All,
    Our customer wants to include GRN date (MIGO) and Goods posting date (MB1C) as a Characteristic for a batch.
    And he wants the system to pick up these dates automatically for batch.
    So in batches will be sorted out based on GRN (MIGO) or Goods posting (MB1C) date.
    Is there any standard characteristics available for these fields?
    How to achieve this functionality.
    Regards,
    Mullairaja
    Edited by: MullaiRaja on Jan 7, 2011 8:28 AM

    Closed

  • How to register artissts feat. other artists without multiple posts?

    How to register artists feat. other artists without multiple posts? If someone understand waht I mean.
    For example, in the list of artist I have "Missy Elliot" but on several songs
    she sings with someone i.e "Missy Elliot feat. Bill Clinton" than thats going to be another post in the artist list.
    Are there any trick to get those posts to register under just one category and still keep the "featuring" information in the artist category.
    Thx
    friss
    iBook   Mac OS X (10.3.9)  

    Thanks for your answer peeble. I thought so to, but I had to ask. But it is little bit annoying. It would have been nice if you could put some info within brackets for example without creating new posts. I might send an mail to Steve.
    iBook    

  • Field settings for MIGO without Purchase order - Mvt type -501

    Dear Guruz,
    in my present situation when i do MIGO with mvt type 101 i have to give delivary note as required entity.  But now i have a requirement where i have to create MIGO without purc doc  i.e mvt type 501.Also i ahve to provide the delivary note in the same.But when i am trying, it i see that The delivary note field is not present in the header part of migo(GR-others). field name: LFSNR. actually my requirement is i have to do the migo with a delivary note that is made mandatory for mvt type 501 also. I tried spro settings but could'nt find any solutions. Do i have to go out of SAP standard or is there any way that  i am unable to come up with as per standards?
    pl discuss

    Dear Krishna,
    In the 501 movement type there is a field available at the header level called as the recipient. Make the field mandatory for the 501 movement type with the following settings:
    SPRO - > Materials Management - Inventory Management and Physical Inventory- Goods Receipt -Define Screen Layout
    In this the screen layout can be changed under the general data. Make the recipient field mandatory. In this field the delivery challan can be maintained.
    In case the client want to change the name of this field from the recipient to "Delivery note" ask your abaper, The functionality is possible in SAP.
    hope it solves the problem

  • MIGO error while posting..!!!

    H Alli,
    Getting below error while posting in MIGO:
    "Account 413501 requires an assignment to a CO object"
    Regards,
    Amit

    Hi
    Check whether profit centre is assigned to your material at sales general plant data
    If not , then give profit centre  and create a fresh cycle and see
    Regards
    Raja

  • Problem with MIGO Transaction, while posting PO with quantities 0

    When I try to post a PO using MIGO, with one or more quantites 0, the output type is not appearing in VL03N. An output type "OPOD( Proof of Delivery)" will appear if all the quantities of the posted PO is greater than 0 !!
       How can I resolve this ? Points will be rewarded for useful answers.

    Hi Naveen,
       Thank you very much for the suggestion. I'm not much familiar with the MM module. Could you please give me some clue on where to find the check box ?

  • Determination of a door for goods receipt via MIGO without inboud delivery

    All,
    Has anyone set up configuration to determine a warehouse management door for goods receipt when there is no inbound delivery?  I wish to utilize door to assist in queue determination and I am unable to find the right settings for door determination on goods receipt.
    Thank you,
    Sandy

    For making the Inbound delivery as required for processing a goods recipt, you need to use the confirmation control key in the PO.
    The ASN from the Vendor vvia EDI will post as an Inbound delivery in the PO.
    In the configuartion of the confirmation control key maintain the Confirmation sequence with Inbound Delivery and mark it as GR relevant and GR assignment.
    SPRO - IMG - MM- Purchasing - Confimrations - Set up confimrmation control.
    This setting will ensure that GR does not happen without an IBD

  • Incoming Invoice without FI posting

    Dear gurus,
    I had a PO document, for which I recieved the products with MIGO, and then did MIRO to enter the Invoice.
    The Invoice did not create any FI posting!!! but it was saved. when opening the document with MIR4, if I cklick on the "Follow-on documents" button it displays a message that no Fi posting exists.
    I try to cancel the document with transaction MR8M and it displays the message : Reversal not possible, accounting document for the ref. does not exist
    Any clues on how to solve this problem, I have to find a way to enter the Invoice in the system correctly
    Thank you in advance..

    Hello,,
    Can you check authorization, some persons were not authorized to see the accounting documents. check with you BASIS guys.
    while reversing it is saying that. accounting document exists then possiblity is authorization problem. check and confirm us.
    Mahesh Naik

  • PS: Settlement of specifiek amounts without real posting on WBS

    I would like to know which settings are to be made to make it possible to settle specific amounts from WBS elements to lets say cost centers without posting on the settling WBS element first. This means that the WBS element that is to be settleted becomes a negative value.

    Hi
    In continuation to my previous answer,
    in fact there are two types of rules for amount settlments.
    Rule 1: Settle specified amount each period
    Rule 2: Settle upper amount.
    In the first case every month a fixed amount is settled from WBS and it can even
    go negative if the debits are less
    In the second case system settles specified or the amount available on WBS which is less in each period. In this way system restricts to a maximum amount available on a WBS and it will not go into negative anytime.
    But in both the case every period there must be postings on WBS to settle
    It is not possible to post 0,01 euro to a WBS element in say january 2007  and settle every month until the end of the year to another CO object.
    Bye
    Ram

  • BAPI for MIGO Transfer Order Posting and STO

    Hi
    I am trying to post a transfer order thru MIGO using BAPI_GOODSMVT_CREATE. But could not able to identify the following fields :
    1) Material Slip or Material Document number
    2) Final Plant and storage location
    3) Destination plant and storage location
    4) Movement Type
    Also I am trying to create a STO using BAPI_PO_CREATE1 but could not able to identify "Your Reference and Our Reference fields.
    Please share your thoughts.

    Hi  Bakshi ,
    see the sample code to pass the material plant storage location nad Movement type..
      t_goodsmvt_item-material   = t_zciotr-matnr.          "Materail
      t_goodsmvt_item-plant      = w_werks.                  "Plant
      t_goodsmvt_item-stge_loc   = w_lgort.                  "Storage Location
      t_goodsmvt_item-move_type  = w_bwart.               "movement type
      t_goodsmvt_item-entry_qnt  = t_zciotr-wmeng.
      t_goodsmvt_item-orderid    = t_zciotr-aufnr.
      t_goodsmvt_item-mvt_ind    = 'F'.
      APPEND t_goodsmvt_item.
      t_goodsmvt_slno-matdoc_itm = 1.
      t_goodsmvt_slno-serialno   = t_zciotr-serialno.
      APPEND t_goodsmvt_slno.
      CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
        EXPORTING
          goodsmvt_header       = t_goodsmvt_header
          goodsmvt_code         = t_goodsmvt_code
        IMPORTING
          goodsmvt_headret      = w_docret
          materialdocument      = w_docno
        TABLES
          goodsmvt_item         = t_goodsmvt_item
          goodsmvt_serialnumber = t_goodsmvt_slno
          return                = t_goodsmvt_ret.
    Regards,
    Prabhudas

  • Extraction Good Receipt lines without Invoice posting

    Dear,
    Is there a possibility to extract the open GR items for which no Invoice has been posted via MIRO transaction ?

    Hi,
       Use TRX ME2L
    Scope of List = BEST
    Selection Parameters = Rechnung
    This will provide a List of all POs without an invoice.(With and without a GR)
    In the report filter "To be del." = 0 to get thoose items where GR has been posted.
    regards

  • MIGO - user exit - POST

    Hi,
    I have added code in the user exit MB_CF001 for the transcation code MIGO.
    I put a break-point in it (hard coded),
    I have activated in SMOD and CMOD also.
    But when i run MIGO and POST (click on post button on application tool bar) it is not posting, while clicking on SAVE also it is not stopping.
    Please tell me when the user exit will be encountered.
    regards,
    Prabhu.
    Points assured.

    sorry.
    regrads,
    Prabhu

Maybe you are looking for