Migrate business partner data to CRM sytem

Dear all,
We're introducing a new CRM system in which we want to maintain the business partner information. One topic of this project is to migrate (export) all relevant business partner information from IS-U to the new system. My question now is if SAP has any standard solutions for exporting master data to e.g. an csv file?
Thanks in advance,
Georg

Hi Ivor,
Thanks for the suggestion. Though the output here doesn't encorporate all information we need. We are switching to a Microsoft solution (dynamicx AX2012) for maintaining the business partner. So we need to extract all business partner master data (general, addresses, contacts and roles) from IS-U. I know SAP has standard tools for importing such as EMIGALL or LSMW but I haven't found it for exporting.

Similar Messages

  • Mass Update of Business Partner Data in CRM

    Hi,
    I would like to know how I can perform a mass update of business partner data in CRM and then have this replicated into R/3.
    I have found notes 802804, 876602, 859632 but these only apply to CRM 5.0 and we are currently working on CRM 4.0.  Does anyone know of anything similar which exists in CRM 4.0?
    I have checked other posts and found help files links like the one below but is this only on CRM 5.0?  (http://help.sap.com/saphelp_crm50/helpdata/en/3c/9b56fae6c7424cafcdf17370399812/frameset.htm )
    Has anyone used the tx. MASS in CRM?
    Also our volume update levels is as high as 300,000 record and updating in CRM and replicating into R/3 through the middleware is causing performance problems.
    Does anyone have any tips on the best approach for this?  Many thanks.
    Regards
    JoJo

    Mass not available in 4.0, could write your own LSMW routine but you still will create bdocs for updates so not sure how that will improve your performance.

  • Extraction of Business Partner data from CRM to MDM

    Does MDM provide standard extractors that can be installed in CRM so that BP data can be extracted and sent to XI via IDOC.
    If it does where can I find this information ?

    have a look at the MDM IT scenario Configuration Guide: https://websmp110.sap-ag.de/~sapidb/011000358700004656452006E
    This document describes how you setup bupa data extraction from CRM to MDM, which is actually done via Proxies and not via IDocs.
    Regards
    Christine

  • IDOC to update business partner data in FSRI(part of CRM system) .

    Hi ,
    I want to know an INBOUND IDOCs to update business partner data in FSRI (part of CRM system) .
    Please help .
    Regards
    Chetan
    Moderator message: please do your own research before asking.
    Edited by: Thomas Zloch on Dec 21, 2010 5:14 PM
    Moderator message -
    Also, when closing old threads, there is no need to add a comment. Adding a pasted answer like "rectified" only brings old threads to the top of the forum list and pushes current ones down. If you do add a comment, please indicate just how the problem was resolved.
    Edited by: Rob Burbank on Dec 21, 2010 1:20 PM

    Mass not available in 4.0, could write your own LSMW routine but you still will create bdocs for updates so not sure how that will improve your performance.

  • Post Business Partner data from SBL CRM to SAP CRM

    Hi CRM Gurus,
    I am very new to SAP CRM. I have got an assignment wherein I will get the XML file from Siebel CRM, which will contain the "Business Partner" data.
                                             I need to upload this data into SAP CRM by mapping all the fields available in the XML file.
                              Please let me know the step by step process to reach the goal.
    Regards
    Sandy

    Sandeep, since this is a conversion related task you might want to browse http://sap.help.com and search for the so called 'XIF Adapter'. This adapter is part of SAP CRM's Middleware and provides the functionality to import and export individual objects using XML/SOAP technology.
    Second option you could evaluate is BP creation through the usage of the standard BADI's that SAP delivers. Let me know whether this gets you started, Tiest.

  • How to do search of business partner data, using a message from external sy

    Hi CRM Gems,
    please send the answer to the following question.
    1.How to do search of business partner data, using a message from external system. What FM’s, BAPI etc that can be used for this functionality?
    your answer will be valuble to me.
    Regards,
    Krishna..

    Hi krishna,
      Look at BAPI   BAPI_BUPA_SEARCH.
    Regards.
    Manuel

  • Distribution of Business Partner Data

    I'm trying to determine the best method of distributing business partner data from R/3 to CRM via XI.
    Under CRM 5.0 help for Distribution of Business Partner Data, there are two ways given for distributing business partner data.
    1.  Replication by means of the SAP NetWeaver Process Integration (XI).
    2.  Distribution via the ALE/IDoc interfaces.
    Does anyone have an opinion on which method is best?  Method 1 obviously goes through XI, but I'm not sure about method 2.
    We won't be using CRM middleware, so that's not an option.  We do need to implement XI.
    Thanks for any advice you can provide on this subject.

    Hi,
    with ALE/IDOC you can also go for XI (for monitoring purposes, errror handling)
    for more about IDOCs and XI
    <a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Entering Business Partner data from IC Webclient - CRM2007

    Just wanted to check that if I enter Business partner data from the IC Webclient is the data stored in the CRM backend tables for example BUT000, BUT050 etc and if so is this done on the fly or a scheduled update? If not what tables are they stored in.  Also can I see the same information once it is entered in the webclient via the CRM transaction BP Thanks

    Hi Niten,
    The tables are the same (for example: but000 for master partner data, but050 for relations, and so on...).
    The data is updated when you press the respective save button, or when you press the 'end' button at telephony bar (to end an Interaction Center Interaction).
    And yes, you can then check the information in BP t-code.
    Just try it and see by yourself
    Kind regards,
    Garcia

  • Middleware: Business Partner replication from CRM 4.0 -- R/3 4.6c.

    Business Partner created in CRM & is getting replicated into R/3 with Sales Area Data. Configuration is working fine.
    Requirement: Automate Accounting view creation in R/3 using middleware.
    1. That is if the user creates Sales view using sales organisation "xxxx" in CRM then the system should create Accounting view in R/3 company code  "YYYY".
    Please confirm, wheather its possible? ? How?
    2. If in CRM, the Sales Organisation is "AAAA", then create accounting view in company code "BBBB" (R/3)
    Your valuable input please.
    With Regards,
    Bapu

    Hi Tiest,
    Yes, PIDE entries made.
    BP is replcating in R/3 successfully.
    In R/3 transaction "XD01" if we create customer along with "Account Group" & "Company code", view "company code data" is visible. I would like to populate this view with "Reconciliation account" entry.
    While passing data from CRM, I would like to pass company code. At present, while passing BP from CRM to R/3, Account View is not getting created.
    Ex. If the user creates Sales view using sales
    Organisation xxxx in CRM then the system should create Accounting view in R/3 company code YYYY.
    Please reply, if further information required.

  • Business partner replication from CRM to ECC

    Hi everyone,
        In case of vendor master data after business partner creation  in CRM  the vendor Master Data should get created in ECC
    system also at the moment i dont have an idea whether it will get replicated to ecc are not can any one help me how to acheive this requirement.

    >>Messages sent when I test corresponding proxy interface, but not sent when I try to create or modify BP. What else should I check to find out the reason of this problem?
    BP Creation will be done be a standard SAP program may be a Function Module. Change Pointer or User Exist should be added to this BP Creation Function Module in order to trigger the Proxy Class with BP data.
    Though am not an ABAP expert, I guess the changesshould be done to the standard flow to trigger Proxy Class also..
    ~SaNv...

  • Extracting Business Partner information from CRM to XI

    What is the best approach to extract Business Partner information from CRM to XI

    Hi,
    by IDOCs of course
    you can create them just like I did:
    /people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner
    (you jut need to change from proxy to ALE - another module)
    but bisically it's a standard to generate
    a business partner record and send it as an IDOC from CRM
    Regards,
    michal

  • How the business partner data is created in  EB

    Hi
    How the business partner data is created in EB ( SRM).
    thanks
    sankar

    Hi,
    I imagine you would like to synchronize business partner data, which are created in backend, into SRM.
    you can use Tcode BBPGETVD or BBPUPDVD or run/schedule  bbp_vendor_sync (need customizing).
    Regards,
    Bertrand

  • Updating business partner addresses in CRM

    Hi,
    I Need to build a interface to update business partner addresses in CRM and assign it to a address usage. I can not find a suitable FM/BAPI for this purpose. Please advise me how to accomplish this.

    Hi,
    Where do you start to activate or configure Business Address Services in R/3 Business partners. Any links to user guides or startup documents will be greatly helpful.
    Thanks very much
    Cheers!
    Padi

  • Migration of  Business Partner data,  from a legacy system, does not work

    Hi All,
    We use a non-SAP application where  our customers sign a loyalty  program. The database created is replicated to CRM 7.0. However, when we create the Target Group in the Web Client UI,  the number of Business Partner in CRM is different from the number of BP registered in  the legacy system.
    Any comment can be helpfull.!
    Regards
    Marí

    Maria,
    Please explain the way the data has been replicated,,, ( Errors in few records - answer to the mystery)
    Is there any segmentation basis used while creating the target group? ( Segmentation Basis - answer to the mystery)
    What are the data sources used for segmentation? ( Different query settings -  answer to the mystery)
    Regards,
    Piyush

  • Adding New attributes to Business Partner Data

    Hi Experts,
    I am new to SAP CRM. The requirement with me is that i have to add two attributes 'County' and 'Demographics' (both Text Fields) to the Business Partener Master. Is there some way to achieve this by configuration like by set types etc. or will i have to use workbench to add these fields. Please Help?
    Thanks.
    Rahul

    Hello Rahul,
    I think the COUNTRY should already be present in the Business Partner master data. Please follow the steps below to find the BOL Structure of the BP Address data. In this structure all the address related data would be present. I hope the fields which you are looking should already be present in this structure.
    1) Run the txn GENIL_MODEL_BROWSER
    2) Give the component set as BP_APPL
    3) "BuilHeader" is the root object. Navigate to the relation "BuilStandardAddressRel" under the root object.
    4) The child object under this relation is "BuilStandardAddress". In the attribute structure, you will find the structure CRMST_ADDRESS_BUIL . This structure holds the data.
    To check the values using this BOL model, follow the steps below
    1) Run the txn GENIL_BOL_BROWSER
    2) Give the component set at BP_APPL
    3) Go to the search object "'BuilHeaderAdvancedSearch'". Give the advanced search criteria and search.
    4) The result would be displayed and try navigating to the "BuilStandardAddress" child object as mentuioend in the steps above.
    Hope this helps.
    Regards,
    Vinay

Maybe you are looking for